MPXV5050VC6T1 vs MPXV5050DP 비교

다음의 상세 나란히 비교: MPXV5050VC6T1 제조: STMicroelectronics 및 MPXV5050DP 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

STMicroelectronics
MPXV5050VC6T1 MPXV5050VC6T1 - 50 kPa Vacuum Pressure Sensor, 5V, SOP-8

MPXV5050VC6T1 - 50 kPa Vacuum Pressure Sensor, 5V, SOP-8

MPXV5050VC6T1 ✓ 활성

사양 비교

파라미터 MPXV5050VC6T1 MPXV5050DP
브랜드 STMicroelectronics NXP Semiconductors
카테고리 Pressure Sensors Pressure Sensors
수명 주기 상태 활성 활성
재고 상태 In Stock In Stock
단가 (USD) $8.95 $5.95
Pressure Type Vacuum / Negative Gauge Differential
Operating Pressure Range 0 to -50 kPa (0 to -7.25 PSI) 0 kPa to 50 kPa (0 psi to 7.25 psi)
Maximum Overpressure 200 kPa —
Supply Voltage (VCC) 4.75 V to 5.25 V (typical 5.0 V) —
공급 전류 5 mA typical [DATA_NEEDED: supply current]
Analog Output Range 0.1 V to 4.6 V at 5 V supply (ratiometric) —
Sensitivity 90 mV/kPa —
출력 유형 Ratiometric analog, single-ended —
Accuracy ±5% (0°C to 85°C) [DATA_NEEDED: full accuracy spec] [DATA_NEEDED: accuracy (%FSO)]
동작 온도 -40°C to +85°C [DATA_NEEDED: full operating range] 0 C to +85 C
Storage Temperature [DATA_NEEDED: storage temperature] —
Response Time [DATA_NEEDED: response time] —
Port Configuration Top port, vertical tube, 0.13" (3.17 mm) tube Dual ports, same side (differential)
패키지 / 케이스 8-SMD, Gull Wing, SOP-8 (case 1737-02) [DATA_NEEDED: case dimensions] —
실장 유형 Surface Mount Surface Mount
On-Chip Signal Conditioning Yes (amplified, temperature-compensated, calibrated) —
Technology Piezoresistive MEMS with bipolar op-amp network —
RoHS 상태 Compliant (verified via distributor page) [DATA_NEEDED: RoHS status]
Maximum Overload Pressure — 200 kPa
Supply Voltage (Vdd) — 4.75 V to 5.25 V (5 V typical, max 6.0 V)
Output Type / Interface — Analog ratiometric voltage
출력 전압 범위 — 0.2 V to 4.7 V at Vdd = 5 V
Output Function — Vout = 5 V x (0.009 x P_kPa - 0.045)
Port Tube Diameter — 3.3 mm (0.13 in)
Package Type — 8-BSOP (SO8), SOT1693-1, 12.06 mm x 12.06 mm
AEC-Q100 Qualification — Yes

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청