10CL080YU484C6G - 80K LE Cyclone 10 LP FPGA, 484-UBGA | Intel
부품 번호: 10CL080YU484C6G ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $51.02 | $51.02 |
| 10 | $48.2 | $482.00 |
| 100 | $42.5 | $4,250.00 |
| 500 | $38.1 | $19,050.00 |
| 1,000 | $34.75 | $34,750.00 |
10CL080YU484C6G 개요
A Field-Programmable Gate Array (FPGA) is a type of programmable logic device (PLD) that belongs to the broader category of digital semiconductors. FPGAs sit in the hierarchy as reconfigurable logic -> programmable logic -> digital IC -> integrated circuit. Cyclone 10 LP devices are specifically positioned at the entry-level/low-power tier of Intel's FPGA portfolio, optimized for low static and dynamic power while retaining sufficient logic, memory and DSP resources for industrial, video, automotive-assist and communications designs. The 10CL080YU484C6G ('U' = 484-pin UBGA, 'C6' = commercial -6 speed grade) is the commercial-temperature 6-speed variant of the 80K-LE device.
Key features of the 10CL080YU484C6G include 81,264 logic elements, 2,810,880 embedded memory bits, 4 PLLs, 244 (18x18) hardware multipliers, support for DDR2/DDR3/LPDDR2 external memory interfaces, and 1.0 V/1.2 V core voltage operation. The device is configured via on-chip configuration logic (AS, PS, JTAG, FPP) and supports Nios II soft-core embedded processors. Cyclone 10 LP devices typically consume up to 25% lower power than equivalent Cyclone IV devices.
Architecturally, the 10CL080 uses Intel's adaptive logic module (ALM) with 8-input fracturable look-up tables, true dual-port M9K block RAM, and variable-precision DSP blocks. The 484-UBGA package gives board designers 289 usable I/O pins in a 19x19 mm footprint with 0.8 mm ball pitch, suitable for 4- to 8-layer PCBs. Configuration can be loaded from serial flash, parallel flash, or via JTAG.
Typical applications include industrial motor control, video bridging and image processing, low-cost software-defined radio, I/O expansion and protocol bridging, machine vision, factory automation and embedded display controllers. The combination of 81K LEs and 244 multipliers is well matched to multi-channel video pipelines and DSP-front-end designs.
When designing with this device, ensure the four PLL power pins are well-decoupled (0.1 uF + 1 uF), and that all VCCIO banks share a common reference if they must be level-shifted. The device supports 1.0 V and 1.2 V core voltages; verify your power tree before PCB layout. Configuration via EPCQ serial flash is the most common production strategy.
This page synthesizes distributor pricing, drop-in alternatives, design notes and FAQ not found in the Intel Cyclone 10 LP datasheet alone - enabling faster component selection and PCB reuse.
드롭인 대체품: 10CL080YU484C6G — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: 10CL080YU484C6G (동일 폼 팩터 및 풋프린트) — 차이점: Package, Speed Grade, Process Technology, PLLs, Configuration Modes.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
10CL080YU484I7G
✅ 드롭인✓ 재고 있음
$152 / 개
데이터시트 보기 →10CL080YU484C8G
✅ 드롭인✓ 재고 있음
$450 / 개
데이터시트 보기 →10CL080YU484A7G
✅ 드롭인✓ 재고 있음
$171 / 개
데이터시트 보기 →10CL055YU484C6G
✅ 드롭인✓ 재고 있음
$24.38 / 개
데이터시트 보기 →10CL040YU484C6G
✅ 드롭인✓ 재고 있음
$24.1 / 개
데이터시트 보기 →10CL080YU484C6G 최대 정격 & 전기적 특성
| Family | Cyclone 10 LP |
| Logic Elements (LE) | 81,264 |
| Embedded Memory Bits | 2,810,880 bits |
| Embedded Memory Blocks | M9K (true dual-port) |
| 18x18 Hardware Multipliers | 244 |
| PLLs | 4 |
| Maximum User I/O | 289 |
| 패키지 | 484-pin UBGA (UBGA-484), 19x19 mm, 0.8 mm pitch |
| Process Technology | 60 nm TSMC low-power |
| Core Voltage | 1.0 V / 1.2 V (selectable) |
| 동작 온도 | 0C to +85C (Commercial) |
| Speed Grade | -6 (C6) |
| Configuration Modes | AS, PS, JTAG, FPP |
| External Memory Support | DDR2, DDR3, LPDDR2 |
| RoHS 상태 | Compliant |
| 실장 유형 | Surface Mount (BGA) |
10CL080YU484C6G 484-pin ubga (ubga-484), 19x19 mm, 0.8 mm pitch 핀 구성 가이드
10CL080YU484C6G(484-pin ubga (ubga-484), 19x19 mm, 0.8 mm pitch 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: 10CL080YU484C6G.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
10CL080YU484C6G 적합 용도: 6 애플리케이션s: Industrial Motor Control, Video Bridge and Image Processing, Low-Cost Software Defined Radio, I/O Expansion and Protocol Bridging, Machine Vision Systems, Embedded Display Controllers.
Industrial Motor Control
The 10CL080YU484C6G fits industrial motor control applications because its 81,264 logic elements and 244 (18x18) hardware multipliers can encode field-oriented control (FOC) loops for 3-phase AC motors at switching frequencies up to 32 kHz. The four on-chip PLLs generate the PWM carrier and quadrature-encoder sample clocks with sub-100 ps jitter. The 289 user I/O pins accommodate multi-axis feedback (encoder, Hall sensor, resolver) and gate-driver interfaces, while 2,810,880 embedded memory bits buffer lookup tables for sine/cosine interpolation and space-vector modulation.
추천
Video Bridge and Image Processing
For video bridging and image-processing designs, the 10CL080YU484C6G delivers sufficient logic and DSP to convert between MIPI CSI-2, parallel RGB, HDMI and LVDS streams at 1080p60. The 244 (18x18) multipliers handle real-time scaling, color-space conversion and deinterlacing, while 2,810,880 bits of embedded M9K memory provide line buffers. The 289 I/O pins in the 484-UBGA package support wide parallel video buses up to 24 bits per color and DDR3 frame-buffer memory.
추천
Low-Cost Software Defined Radio
The 10CL080YU484C6G is appropriate for entry-level SDR designs because its 244 hardware multipliers and 81,264 LEs can implement digital down/up-conversion chains (DDC/DUC) for sub-6 GHz narrowband receivers. The four PLLs synthesize the ADC/DAC sample clocks and LO offsets. The 484-UBGA package exposes 289 I/O pins, sufficient to interface dual-channel 14-bit ADCs/DACs at 125 MSPS over LVDS. Lower static power than Cyclone III makes the device suitable for portable SDR peripherals.
추천
I/O Expansion and Protocol Bridging
Use the 10CL080YU484C6G to expand host-processor I/O or bridge between incompatible interfaces (UART/SPI/I2C to USB/Ethernet/CAN). With 289 user I/O pins and 81,264 LEs, the device can implement multi-protocol controllers simultaneously, plus a Nios II soft-core running user logic. The 2,810,880-bit memory holds packet buffers for USB-HID or Ethernet-MAC bridges. Industrial-grade drop-in variant 10CL080YU484I7G supports wider temperature deployments.
추천
Machine Vision Systems
The 10CL080YU484C6G fits machine-vision pipelines because 244 (18x18) multipliers enable real-time convolution, Sobel edge detection and thresholding on 1- to 5-megapixel image streams. The 2,810,880 bits of embedded memory provide line and frame buffers. The 484-UBGA package exposes 289 I/O for parallel image-sensor interfaces and GigE Vision / USB3 Vision trigger outputs. Lower power than Cyclone III benefits thermally-constrained camera enclosures.
추천
Embedded Display Controllers
The 10CL080YU484C6G works well as a low-cost display controller driving LCD, OLED or e-paper panels. Its 81,264 LEs and 244 multipliers can implement on-the-fly color-depth conversion, gamma correction and partial-refresh logic for e-paper, while the 2,810,880 bits of embedded memory store font tables and frame buffers. The 289 user I/O pins expose LVDS / RGB / SPI / I2C interfaces, and the four PLLs generate accurate pixel clocks up to 148.5 MHz for 1080p panels.
추천
추천 제품 요약
엔지니어링 참조 데이터: 10CL080YU484C6G — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | 10CL080YU484I7G | 10CL080YU484C8G | 10CL055YU484C6G | 10CL040YU484C6G |
|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel |
| Package | 484-pin UBGA | 484-pin UBGA - same | 484-pin UBGA - same | 484-pin UBGA - same | 484-pin UBGA - same |
| Logic Elements | 81,264 | 81,264 | 81,264 | 55,856 | 39,600 |
| Embedded Memory (bits) | 2,810,880 | 2,810,880 | 2,810,880 | 2,143,488 | 1,161,216 |
| 18x18 Multipliers | 244 | 244 | 244 | 156 | 108 |
| Maximum User I/O | 289 | 289 | 289 | 321 | 321 |
| Speed Grade | -6 | -7 | -8 | -6 | -6 |
| Operating Temperature | 0C to +85C (Commercial) | -40C to +100C (Industrial) | 0C to +85C (Commercial) | 0C to +85C (Commercial) | 0C to +85C (Commercial) |
| Core Voltage | 1.0 V / 1.2 V | 1.0 V / 1.2 V | 1.0 V / 1.2 V | 1.0 V / 1.2 V | 1.0 V / 1.2 V |
| Approximate Unit Price | $51.02 | $58-65 | $45-48 | $38-42 | $28-32 |
주요 차별점
- Best-in-class logic density in the 484-UBGA family (vs 10CL055YU484C6G)
- Faster -6 speed grade for timing-critical pipelines (vs 10CL080YU484C8G)
- Commercial temperature variant with widest distribution availability (vs 10CL080YU484I7G)
설계 노트
The 10CL080YU484C6G requires multiple supply rails: VCCINT (1.0 V or 1.2 V core, up to ~1.5 A under load), VCCIO (1.2-3.3 V bank supplies, up to ~500 mA per bank), VCCPD (2.5/3.3 V configuration power), VCCA_PLL (2.5 V PLL analog, low-noise LDO required) and VCCBAT (battery backup for configuration RAM in non-volatile mode). Decouple each PLL power pin with a 0.1 uF X7R plus a 1 uF X5R capacitor placed within 3 mm of the pin. Use a dedicated ferrite bead for VCCA_PLL to isolate it from digital switching noise; share a common ground via a single-point connection at the device thermal pad.
The 484-pin UBGA uses 0.8 mm ball pitch, requiring 4-layer PCB minimum with 0.4 mm microvias on the top layer and 0.2 mm trace/space rules. All 289 signal pins fan out on the top layer through via-in-pad; place decoupling caps on the bottom layer directly under the BGA shadow. Maintain 50 ohm controlled impedance on high-speed differential pairs (LVDS, DDR3). Use the full top-layer ground pour as a thermal heat-spreader; the device thermal pad must be soldered to at least 16 thermal vias (0.3 mm drill, 0.6 mm pad) to the inner ground plane for adequate heat dissipation.
Match high-speed I/O and DDR trace lengths within the Intel Quartus Prime TimeQuest timing margins. For DDR3 interfaces, keep DQS-to-DQ skew under 20 ps and address/command-to-clock skew under 50 ps. Route each I/O bank on its own VCCIO supply to support mixed-voltage interfacing (1.8 V, 2.5 V, 3.3 V). Avoid routing signals through the BGA shadow at angles greater than 45 degrees to the breakout direction; use right-angle or matched-length serpentine routing for fan-out. Keep the JTAG chain length below 100 mm to avoid TCK signal integrity issues.
Do not assume the 484-UBGA ('U' suffix) and 484-FBGA ('F' suffix) Cyclone 10 LP packages have identical ball maps - they do not. A PCB designed for 10CL080YU484C6G cannot directly accept 10CL080YF484C8G without re-checking every ball position. Do not leave VCCIO floating on unused banks - tie each unused bank to a valid voltage (typically 2.5 V or 3.3 V) to prevent configuration failure. Configuration via EPCQ flash requires MSEL[2:0] pin strapping to select AS mode; incorrect strapping is a frequent boot failure cause.
규정 준수 정보
RoHS compliant per Intel datasheet. Commercial temperature grade (not AEC-Q100); for automotive applications choose 10CL080YU484A7G which is the automotive-qualified variant in the same 484-UBGA package.
