A3PE1500-1FGG484 - ProASIC3E Flash FPGA 1.5M Gates | Microchip
부품 번호: A3PE1500-1FGG484 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $68.5 | $68.50 |
| 10 | $63.2 | $632.00 |
| 100 | $57.9 | $5,790.00 |
| 500 | $52.4 | $26,200.00 |
| 1,000 | $48.1 | $48,100.00 |
A3PE1500-1FGG484 개요
A flash-based FPGA is a field-programmable gate array whose configuration is stored in on-chip flash memory cells rather than volatile SRAM. This places the ProASIC3E family in the broader hierarchy of programmable logic devices: FPGA -> programmable logic -> digital IC -> semiconductor. Unlike SRAM FPGAs, flash-based devices are live-at-power-up, single-chip solutions that require no external configuration PROM, reducing bill-of-materials cost and board area while improving configuration security and power-up immunity.
Key features include reprogrammable flash fabric, up to 504 kbits of true dual-port SRAM block memory, low total cost of ownership (TOC), and single-chip operation without boot devices. The fabric supports system-level performance suitable for glue logic consolidation, bus bridging, and control-plane functions.
Technically, the device uses Microchip's Versatile routing fabric with flash switches that retain configuration through power cycles. The Sea-of-Versatile-Element architecture provides fine-grained logic granularity, and embedded block SRAM supports FIFOs and dual-port buffering for data-path designs.
Typical applications include industrial automation control, communications and networking line-card support logic, medical instrumentation, and aerospace/defense systems where configuration volatility is undesirable. The 280 available I/Os in this package support wide parallel bus interfaces.
Design consideration: the commercial temperature grade (0C to +70C) of the non-I suffix means industrial designs should select the A3PE1500-1FGG484I variant instead; also plan I/O bank voltages carefully since ProASIC3E supports mixed-voltage I/O.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
드롭인 대체품: A3PE1500-1FGG484 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: A3PE1500-1FGG484 (동일 폼 팩터 및 풋프린트) — 차이점: Package, System Gates, Family, Process Technology, Logic Elements.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
A3PE1500-1FGG484I
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →M1A3PE1500-1FGG484
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
A3PE1500-FGG484I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
A3PE3000-1FGG484I
✅ 드롭인✓ 재고 있음
$1336.6 / 개
데이터시트 보기 →A3PE3000-2FGG484
✅ 드롭인✓ 재고 있음
$28.9 / 개
데이터시트 보기 →A3PE1500-1FGG484 최대 정격 & 전기적 특성
| Family | ProASIC3E |
| System Gates | 1,500,000 (1.5M) |
| Fabric Cells / Logic Capacity | 276,480 |
| Logic Cells | 38,400 |
| User I/Os (this package) | 280 |
| Max User I/Os (family) | 616 |
| Embedded SRAM | Up to 504 kbits true dual-port |
| Process Technology | 130-nm, 7-layer metal (6 copper), flash-based CMOS |
| Core Supply Voltage | 1.5 V |
| Configuration Memory | On-chip flash (live-at-power-up, single-chip) |
| Speed Grade | -1 (standard) |
| 동작 온도 | 0C to +70C (commercial) |
| 패키지 | 484-ball FBGA (FGG484), 1.00 mm pitch |
| 실장 유형 | Surface Mount |
| Packaging | Tray |
A3PE1500-1FGG484 484-ball fbga (fgg484), 1.00 mm pitch 핀 구성 가이드
A3PE1500-1FGG484(484-ball fbga (fgg484), 1.00 mm pitch 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: A3PE1500-1FGG484.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
A3PE1500-1FGG484 적합 용도: 6 애플리케이션s: Industrial Automation Control, Communications and Networking Line Cards, Medical Instrumentation, Aerospace and Defense Support Logic, Test and Measurement Equipment, Battery-Powered and Power-Sensitive Systems.
Industrial Automation Control
The A3PE1500-1FGG484 fits industrial automation controllers where instant-on behavior and single-chip integration reduce system complexity. Its flash-based fabric is live-at-power-up, so I/O states are valid within microseconds of power application - valuable for safety interlocks and motor-control sequencing that cannot wait for an SRAM FPGA to load configuration. The 280 user I/Os in the FGG484 package support wide parallel buses to PLC backplanes, encoder interfaces, and fieldbus PHYs, while up to 504 kbits of true dual-port SRAM buffer data between clock domains. Designers trade the commercial 0C to +70C rating against the lower cost of the non-I suffix; for uncontrolled factory-floor temperatures, the drop-in A3PE1500-1FGG484I variant should be specified instead.
추천
Communications and Networking Line Cards
In networking equipment, the A3PE1500-1FGG484 serves as support logic bridging control processors, PHYs, and switch fabric. The 1.5M-gate fabric consolidates glue logic, bus arbitration, and status aggregation that would otherwise occupy multiple discrete devices, cutting BOM cost and board area. True dual-port SRAM (up to 504 kbits) implements FIFOs between asynchronous domains such as a management Ethernet MAC and a backplane interface. Because the configuration is flash-based, a line card reboots instantly without a configuration PROM, improving carrier-grade availability metrics. The 280 I/Os accommodate wide parallel PHY interfaces at moderate data rates; for line-rate packet processing, pair the FPGA with a dedicated switch IC and use the fabric for the control plane.
추천
Medical Instrumentation
Medical diagnostic and monitoring equipment benefits from the A3PE1500-1FGG484's deterministic, instant-on power-up and single-chip configuration, which simplify design documentation for regulatory review. The flash fabric retains its bitstream through power cycles and offers inherent resistance to configuration tampering compared to SRAM-based devices, supporting device-security requirements. With 280 user I/Os, the FGG484 part interfaces sensor front-ends, ADCs, and display controllers in patient monitors and laboratory analyzers. Designs must respect the commercial 0C to +70C temperature rating; clinical environments typically comply, but transport/storage conditions may justify the industrial A3PE1500-1FGG484I variant, which is footprint-identical and requires no PCB change to adopt.
추천
Aerospace and Defense Support Logic
ProASIC3E devices are widely used in defense and aerospace programs where configuration volatility is a system risk: the flash-based A3PE1500-1FGG484 powers up functional without any external bitstream, eliminating an attack and failure mode present in SRAM FPGAs. The 1.5M gates absorb bus interfaces (MIL-STD-1553 companion logic, ARINC companions), telemetry framing, and housekeeping functions, while dual-port SRAM implements ping-pong buffers between processing chains. Designers should note the commercial temperature grade and select the I-suffix variant for extended environments, and should verify radiation requirements against the dedicated RT ProASIC3 family for true spaceflight missions. The FGG484 footprint allows migration to A3PE3000 variants as logic grows without PCB rework.
추천
Test and Measurement Equipment
Bench instruments and automated test equipment use the A3PE1500-1FGG484 for timing generation, trigger logic, and instrument bus interfacing. The 276,480-cell fabric with 38,400 logic cells implements precise digital delay lines, pattern generators, and protocol engines, while the flash configuration guarantees the instrument is operational the moment power is applied - important for instruments with fast-boot requirements. The 280 I/Os connect front-panel indicators, relay drivers, and multiple measurement channels simultaneously. Embedded true dual-port SRAM supports deep capture buffers for logic-analysis functions. Because the fabric is reprogrammable in-system via FlashPro, instrument firmware features can be updated in the field without recalling hardware, protecting both manufacturer and end-user investment.
추천
Battery-Powered and Power-Sensitive Systems
The ProASIC3E family includes Low Static (Idle) mode support via the ULSICC macro documented in the ProASIC3E FPGA Fabric User's Guide, letting designs park the fabric in a low-leakage state between events. Combined with the absence of a configuration device - no PROM read on every power cycle - the A3PE1500-1FGG484 suits battery-backed data loggers, portable field equipment, and energy-harvesting nodes that wake intermittently. Flash storage means state and bitstream survive complete power removal, so the system resumes instantly on wake. Engineers should budget core current during active operation and use clock-gating and the ULSICC macro aggressively; the commercial 0C to +70C range should be verified against the product's environmental specification.
추천
추천 제품 요약
엔지니어링 참조 데이터: A3PE1500-1FGG484 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | A3PE1500-1FGG484I | M1A3PE1500-1FGG484 | A3PE3000-1FGG484I | A3PE3000-2FGG484 |
|---|---|---|---|---|---|
| Package | 484-ball FBGA (FGG484), 1.00 mm pitch | 484-ball FBGA (FGG484) - same | 484-ball FBGA (FGG484) - same | 484-ball FBGA (FGG484) - same | 484-ball FBGA (FGG484) - same |
| Brand | Microchip Technology (Actel heritage) | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 1.5M | 1.5M | 1.5M | 3M (2x) | 3M (2x) |
| Embedded ARM Core | None | None | ARM Cortex-M1 | None | None |
| Speed Grade | -1 (standard) | -1 | -1 | -1 | -2 (faster) |
| Configuration | On-chip flash, live-at-power-up | On-chip flash, live-at-power-up | On-chip flash, live-at-power-up | On-chip flash, live-at-power-up | On-chip flash, live-at-power-up |
| Core Supply Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
주요 차별점
- Instant-on single-chip operation (vs SRAM FPGAs (e.g., Xilinx/Intel equivalents))
- Extended-temperature drop-in within same footprint (vs A3PE1500-1FGG484I)
- Embedded processing upgrade without re-spin (vs M1A3PE1500-1FGG484)
- Trade-off: lower density ceiling vs A3PE3000 (vs A3PE3000-1FGG484I)
설계 노트
The A3PE1500-1FGG484 uses a 1.5V core supply with separate I/O bank supplies. Decouple the core rail with at least 22 uF bulk capacitance plus 0.1 uF ceramics per power pin, placed within 3 mm of each VCC ball via. Because the flash fabric draws negligible configuration current at power-up (unlike SRAM FPGAs with inrush during bitstream loading), supply sequencing requirements are relaxed - but still follow the Microchip power-up ramp-rate guidance in the ProASIC3E user's guide to avoid I/O latch-up on mixed-voltage banks.
The FGG484 package uses a 1.00 mm ball pitch, which is routable on standard 0.8 mm-design-rule PCBs with via-in-pad or dog-bone fanout on the outer two rows. Plan at least 4 layers: signal-top, GND, power, signal-bottom. Connect all GND balls to a solid ground plane, and do not leave unused VCC/VCIO balls floating - tie each I/O bank's VCIO to its actual I/O voltage per the Libero voltage-mapping report. Estimated: a typical design uses the exposed thermal path minimally since the FBGA dissipates under 1 W in most glue-logic roles.
Do not confuse the FGG484 and FG484 package suffixes - they differ in ball pitch/finish details and are NOT interchangeable on the same PCB land pattern. Also verify the temperature grade: the non-I suffix (-1FGG484) is commercial 0C to +70C only. Finally, programming requires the Libero SoC toolchain and Microchip FlashPro hardware; SRAM-FPGA programming flows (JTAG bitstreams to external PROM) do not apply, and bitstream updates happen in-system via the on-chip flash.
규정 준수 정보
Compliance status not stated in the retrieved distributor data; consult the Microchip product page or request a certificate of conformance. AEC-Q100 qualification is not claimed for ProASIC3E commercial/industrial parts.
