A54SX32-1CQ208 - 48K Gate SX FPGA, 208-CQFP | Microchip
부품 번호: A54SX32-1CQ208 ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
A54SX32-1CQ208 개요
An FPGA is a semiconductor device containing a matrix of configurable logic blocks (CLBs) interconnected by programmable interconnects, allowing designers to implement custom digital circuits after manufacturing. FPGAs sit within the broader hierarchy of programmable logic ICs, sitting above CPLDs in density and below ASICs in volume cost, and are a cornerstone of modern digital system design.
Key features of the A54SX32-1CQ208 include 2880 configurable logic modules in a sea-of-modules architecture, a 0.35 um CMOS process, and pin-to-pin family migration options across the SX and SX-A families. The sea-of-modules architecture simplifies design timing closure, reduces design cost and power consumption, and shortens time-to-market for performance-intensive applications.
Architecturally, the SX family uses a two-module fabric (sequential and combinational modules) that yields high gate utilization and predictable routing delays. The ceramic CQFP package with tie bar provides excellent mechanical reliability and thermal performance, making it suitable for harsh-environment and long-lifecycle systems.
Typical applications include aerospace and defense control logic, industrial automation controllers, communications infrastructure glue logic and protocol bridging, and test and measurement equipment where one-time-programmable antifuse reliability is valued.
Design consideration: this part is a legacy one-time-programmable (antifuse) FPGA and is RoHS non-compliant (contains lead per the ceramic package construction), so verify regulatory exemptions or consider newer family members for new designs.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
드롭인 대체품: A54SX32-1CQ208 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: A54SX32-1CQ208 (동일 폼 팩터 및 풋프린트) — 차이점: Family, Package, System Gates, Logic Modules, RoHS Status.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
A54SX32-1CQ208B
✅ 드롭인✓ 재고 있음
$138.75 / 개
데이터시트 보기 →A54SX32-1CQ208M
✅ 드롭인✓ 재고 있음
$55.75 / 개
데이터시트 보기 →A54SX32-CQ208
✅ 드롭인✓ 재고 있음
$1545.45 / 개
데이터시트 보기 →A54SX32-CQ208B
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →A54SX32-CQ208M
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →A54SX32-1CQ208 최대 정격 & 전기적 특성
| System Gates | 48000 gates |
| Logic Modules / CLBs | 2880 |
| Programmable I/O | 174 |
| Maximum System Frequency | 240 MHz |
| Core Supply Voltage | 3 V to 3.6 V |
| I/O Supply Voltage | 4.75 V to 5.25 V |
| Speed Grade | -1 |
| Process Technology | 0.35 um CMOS |
| 패키지 | 208-BFCQFP with tie bar |
| 실장 유형 | Surface Mount |
| Programming Type | One-Time Programmable (antifuse) |
| RoHS 상태 | RoHS Non-Compliant |
| Lead Free Status | Contains Lead |
| Family | SX (Actel / Microchip) |
A54SX32-1CQ208 208-bfcqfp with tie bar 핀 구성 가이드
A54SX32-1CQ208(208-bfcqfp with tie bar 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: A54SX32-1CQ208.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
A54SX32-1CQ208 적합 용도: 6 애플리케이션s: Aerospace and Defense Control Logic, Industrial Automation Controllers, Communications Infrastructure, Test and Measurement Equipment, Avionics and Legacy System Sustainment, Medical Device Control Electronics.
Aerospace and Defense Control Logic
The A54SX32-1CQ208 fits aerospace and defense control applications because its one-time-programmable antifuse fabric is immune to configuration upsets, and the ceramic 208-pin BFCQFP with tie bar provides hermetic, mechanically robust packaging suited to vibration and thermal cycling. With 48,000 gates, 2880 logic modules, and 174 user I/O, it implements sequencers, bus interfaces, and telemetry formatting at up to 240 MHz. Its dual-rail operation (3.3 V core, 5 V I/O) eases integration with legacy 5 V backplanes. The OTP nature also prevents bitstream extraction, an inherent security advantage over SRAM FPGAs in defense programs.
추천
Industrial Automation Controllers
In industrial automation, the A54SX32-1CQ208 serves as deterministic glue logic, motor-control sequencers, and sensor-interface aggregation on PLC and drive boards. The 5 V-tolerant I/O bank (4.75 V to 5.25 V supply) connects directly to legacy industrial signaling, while the 3.3 V core keeps dynamic power manageable across 2880 logic modules. The one-time-programmable fabric removes configuration-storage failure modes common on factory-floor equipment, and the ceramic CQFP withstands the wider temperature swings of electrical cabinets. Its 240 MHz family performance ceiling comfortably covers counter, encoder, and interlock timing functions.
추천
Communications Infrastructure
The A54SX32-1CQ208 integrates protocol bridging, backplane arbitration, and line-card glue logic in telecom and datacom equipment. With 48,000 system gates and up to 240 MHz operation in the 0.35 um CMOS process, it consolidates discrete PAL/GAL devices into one chip, reducing BOM cost and board area. The 174 user I/O support wide parallel data paths typical of T1/E1 and legacy backplane interfaces, and 5 V-compatible I/O eases mixing with older line-card circuitry. The sea-of-modules architecture delivers predictable routing delays, simplifying timing closure for synchronous framer interfaces.
추천
Test and Measurement Equipment
Bench and automated test instruments use the A54SX32-1CQ208 for timing generators, pattern capture, and instrument bus interfacing. The antifuse fabric's deterministic delays support precisely timed stimulus generation, while 2880 logic modules and 174 I/O accommodate channel-dense pattern engines. The ceramic CQFP's thermal robustness handles continuous bench operation, and the dual 3.3 V core / 5 V I/O rails interface directly with TTL-level test fixtures. Because the configuration is burned in once, instruments power up instantly with no configuration load time - a measurable benefit for automated test throughput.
추천
Avionics and Legacy System Sustainment
For avionics upgrades and legacy fleet sustainment, the A54SX32-1CQ208 lets engineers preserve proven, qualified RTL while replacing scarce or discontinued support components. Its one-time-programmable fabric eliminates configuration-device single points of failure in flight hardware, and the hermetic ceramic 208-pin CQFP with tie bar matches the package constructions commonly qualified in airborne systems. The dual-rail 3.3 V/5 V architecture integrates with both legacy 5 V avionics buses and modern 3.3 V processing sections. The CQ208M military-screened sibling extends operation across the full military temperature range.
추천
Medical Device Control Electronics
Medical diagnostic and therapy equipment benefits from the A54SX32-1CQ208's fixed, verified logic: once programmed, the antifuse configuration cannot be corrupted by noise, software faults, or radiation-like events, supporting deterministic safety behavior in pump controllers and imaging subsystem sequencing. The 48,000-gate capacity handles interface logic, watchdog, and interlock functions, while 174 I/O connect to sensors, actuators, and front panels. The 5 V-tolerant I/O simplifies integration with established medical-bus transceivers. Designers should note the RoHS non-compliance and confirm applicable exemptions for legacy medical platforms.
추천
추천 제품 요약
엔지니어링 참조 데이터: A54SX32-1CQ208 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | A54SX32-1CQ208B | A54SX32-1CQ208M | A54SX32-CQ208 | A54SX32-CQ208B |
|---|---|---|---|---|---|
| Package | 208-BFCQFP with tie bar | 208-BFCQFP with tie bar - same | 208-BFCQFP with tie bar - same | 208-BFCQFP with tie bar - same | 208-BFCQFP with tie bar - same |
| Brand | Microchip Technology (Actel) | Microchip Technology (Actel) | Microchip Technology (Actel) | Microchip Technology (Actel) | Microchip Technology (Actel) |
| System Gates | 48000 | 48000 | 48000 | 48000 | 48000 |
| Logic Modules | 2880 | 2880 | 2880 | 2880 | 2880 |
| User I/O | 174 | 174 | 174 | 174 | 174 |
| Supply Voltage | 3.0-3.6 V core / 4.75-5.25 V I/O | 3.0-3.6 V core / 4.75-5.25 V I/O | 3.0-3.6 V core / 4.75-5.25 V I/O | 3.0-3.6 V core / 4.75-5.25 V I/O | 3.0-3.6 V core / 4.75-5.25 V I/O |
주요 차별점
- Hermetic ceramic CQFP package with tie bar (vs A54SX32-PQG208M)
- Commercial screening option within same footprint (vs A54SX32-1CQ208M)
- One-time-programmable antifuse security (vs SRAM-based competitor FPGAs)
설계 노트
The A54SX32-1CQ208 requires two supply rails: 3.0 V to 3.6 V for the core and 4.75 V to 5.25 V for I/O buffers. Decouple each rail with bulk capacitance plus 0.1 uF ceramics placed at the package power pins. Estimated: with 2880 modules active at moderate utilization, core current is typically in the tens of mA range per the SX family datasheet power model - verify against your Libero/Designer power report rather than assuming. Ensure the 5 V I/O rail is present before applying 5 V-tolerant input signals to avoid latch-up stress.
This is a one-time-programmable antifuse FPGA: a design error after programming is unrecoverable on that device. Prototype on debug-friendly variants (or programming-service runs) before committing ceramic CQFP parts, which carry a significant unit cost. Also note the device is RoHS non-compliant (contains lead per distributor data) - confirm RoHS exemption 7 applicability for your market before production. Verify the exact screening suffix (commercial vs M) against program temperature requirements before substitution.
The 208-pin CQFP with tie bar has 0.5 mm lead pitch (per distributor Utmel listing) and requires careful solder-paste stencil design to prevent bridging on the fine-pitch perimeter leads. The tie bar must be soldered or mechanically anchored - leaving it floating creates a resonance point under vibration. Provide symmetrical fan-out around the package to minimize skew on wide parallel buses, and route the 5 V I/O bank with adequate spacing from the 3.3 V core domain to respect mixed-voltage creepage expectations.
규정 준수 정보
Per digchip distributor data: RoHS Non-Compliant, Contains Lead - typical of legacy ceramic CQFP packaging. Verify RoHS lead-in-ceramic exemption applicability.
