Analog Devices

AD647SE - Ultralow Drift Dual JFET Amplifier | Analog Devices

부품 번호: AD647SE ✗ 단종
±18 V Vdss 20-pin CLLCC ceramic leaded chip carrier Package
MOQ: 1 |

AD647SE 개요

The Analog Devices AD647SE is an ultralow-drift, dual JFET operational amplifier with two amplifiers in a 20-pin ceramic leaded chip carrier package. Its principal characteristics are ultralow input-voltage drift, matched monolithic JFET inputs, broad ±18 V supply capability, and the use of ion-implantation plus laser wafer drift trimming. The device is intended for precision analog signal chains where input bias current, offset stability, and low drift are more important than wide-band operation.

An operational amplifier is an active feedback component that amplifies the difference between its two inputs. The AD647SE belongs to the JFET-input operational-amplifier hierarchy, within precision analog amplifiers and signal-conditioning ICs. Unlike bipolar-input amplifiers, its JFET input stage draws very low bias current, making it suitable for high-impedance sensors, guarding structures, sample-and-hold circuits, and measurement front ends. Its monolithic construction also places two closely matched amplifiers in one package.

Key features include an ultralow-drift architecture, ion-implanted matched JFETs on a monolithic bipolar chip, and laser wafer drift trimming. The dual-amplifier configuration allows differential or instrumentation-style signal processing while reducing board area and package count. The 20-pin CLLCC ceramic package supports applications that require a robust hermetic-style device package, while the ±18 V operating capability permits conventional dual-supply analog circuits.

The AD647’s input stage is implemented with ion-implanted JFETs on a monolithic bipolar chip. This process provides closely matched input devices, while laser wafer trimming is used to reduce offset-voltage drift. The practical result is an amplifier intended for accurate current-to-voltage conversion, low-level sensing, and feedback loops where changes in input offset voltage can degrade measurement accuracy. Unlike a general-purpose high-speed amplifier, its design prioritizes drift performance and input behavior rather than slew rate or wide-band bandwidth.

Typical uses include precision instrumentation, low-level sensor conditioning, bridge and current-feedback measurement paths, laboratory test equipment, and high-impedance buffer stages. Two amplifiers in one package can also support differential excitation or paired active-feedback circuits when channel matching is important. Because the AD647SE is an older precision amplifier, engineers should verify availability and current lifecycle status before committing it to a new production design.

For stable operation, keep the feedback network and compensation components close to the device, maintain the specified common-mode and supply limits, and avoid relying on a high-speed layout for this drift-optimized amplifier. Decoupling capacitors should be placed directly beside the supply pins, while sensitive input traces should be guarded and kept away from switching nodes. The ceramic package also requires attention to lead alignment and thermal conditions during soldering.

This page combines the manufacturer’s device description with package identification, practical application guidance, and drop-in replacement research. The replacement shortlist is intentionally limited to package-compatible military-order variants because the available cross-reference results do not establish five distinct same-package drop-in amplifiers. This avoids presenting merely similar JFET amplifiers as direct PCB replacements.

드롭인 대체품: AD647SE — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: AD647SE (동일 폼 팩터 및 풋프린트) — 차이점: Amplifier Type, Supply Voltage Range.

Analog Devices
Amplifier Type: Dual JFET Operational Amplifier
Supply Voltage Range: ±5 V to ±18 V

AD647SE/883B

✅ 드롭인
Analog Devices
📦 20-pin CLLCC
Dual JFET Operational Amplifier · 2 · 500 µV · 10 pA · 2 V/µs · 15 V · ±5 V to ±18 V · -18 V

가격 문의

데이터시트 보기 →

AD647SE/883BH

✅ 드롭인
📦 20-pin CLLCC
Uses the /883BH ordering designation versus standard AD647SE; screening or grade details must be confirmed, while the AD647 amplifier family is retained.

📋 참조 대체품 (카탈로그에 없음)

AD647SE 최대 정격 & 전기적 특성

Amplifier Type Dual precision JFET-input operational amplifier
Number of Amplifiers 2
Supply Voltage Range ±18 V
Input Transistor Technology Ion-implanted JFET on a monolithic bipolar chip
Offset Trimming Laser wafer drift trimming
패키지 20-pin CLLCC ceramic leaded chip carrier

AD647SE 20-pin cllcc ceramic leaded chip carrier 핀 구성 가이드

AD647SE(20-pin cllcc ceramic leaded chip carrier 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

AD647SE의 20-pin cllcc ceramic leaded chip carrier 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: AD647SE.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

AD647SE 적합 용도: 6 애플리케이션s: Precision Current-to-Voltage Conversion, High-Impedance Sensor Signal Conditioning, Bridge and Instrumentation Measurement, Laboratory Instrumentation Front End, Active Feedback and Probe Buffering, Low-Level Signal Amplification.

🔧

Precision Current-to-Voltage Conversion

The AD647SE is appropriate for precision current-to-voltage conversion because its JFET inputs minimize disturbance to high-impedance current sources while the ultralow-drift architecture limits input-offset changes with temperature. Place the amplifier in a transimpedance configuration and use the two channels for either paired conversion channels or a differential auxiliary signal. The 20-pin CLLCC package provides a single ceramic package for sensitive analog circuitry. Confirm input-bias-current, common-mode-range, and compensation requirements from the manufacturer datasheet before setting the feedback resistor, because those values determine stability and usable transimpedance bandwidth.

🧩

High-Impedance Sensor Signal Conditioning

The AD647SE can condition signals from high-impedance sensors because its JFET input stage reduces input bias-current loading compared with a conventional bipolar-input precision amplifier. Its ultralow drift behavior is useful when a small sensor output must remain accurate over changing temperature. Use the matched dual channels for complementary sensing or differential instrumentation, and protect sensitive nodes with guarding, clean connectors, and short PCB traces. The usable common-mode voltage, input capacitance, and settling behavior must remain within the manufacturer limits, particularly for capacitive sensors where leakage and stability can dominate the measurement error.

🏭

Bridge and Instrumentation Measurement

The AD647SE fits bridge and instrumentation measurements where offset drift can obscure a small differential signal. Two JFET-input amplifiers in one ceramic package provide the basis for instrumentation-style signal handling, while ion-implanted matching supports closely related channel behavior. Place both amplifier inputs symmetrically to minimize thermal gradients and keep the bridge excitation and return paths away from sensitive input traces. Select resistor values for the required excitation current and differential range, then verify input common-mode limits under worst-case bridge imbalance. The amplifier should be evaluated for temperature drift, offset behavior, noise, and stability before being used as the final measurement chain.

🔧

Laboratory Instrumentation Front End

The AD647SE is suitable for laboratory instrumentation front ends that amplify small sensor or source signals while maintaining low input loading and predictable offset behavior. The dual arrangement can implement two channels without duplicating the ceramic package, and the ultralow-drift architecture is valuable in equipment expected to maintain calibration over temperature. Use short, guarded input paths and isolate the amplifier from high-current return paths that could create ground-potential errors. Because this is a legacy precision JFET amplifier, validate current availability and the required temperature range before finalizing a laboratory product, and use the manufacturer application information as the basis for compensation and layout.

📡

Active Feedback and Probe Buffering

The AD647SE can serve as an active-feedback or probe-buffering stage when the source presents high impedance and the amplifier must avoid introducing excessive bias-current error. The JFET input architecture supports low-load operation, while the matched dual channels can buffer or monitor two related probes. Keep the input node physically compact and use guarding to reduce leakage and surface contamination when handling femtoamp- or picoamp-scale signals. Compensation and bandwidth must be checked for the feedback network rather than inferred from general-purpose amplifier expectations. The ±18 V capability accommodates conventional laboratory rails, but the complete input and output ranges still define the safe operating envelope.

⚡

Low-Level Signal Amplification

The AD647SE is intended for low-level signal amplification where offset drift and input loading can compromise measurement accuracy. Its ultralow-drift JFET-input architecture makes it suitable for conditioning weak signals ahead of an ADC or measurement system, while the dual package can process a main channel and a reference or monitor channel. Define the smallest signal of interest, acceptable input-referred error, and required bandwidth before choosing the feedback network. Place compensation and gain-setting components close to the device, maintain symmetric routing, and keep switching converters and digital clocks away from the sensitive input. Validate noise, offset, common-mode range, and settling in the complete analog chain.

추천 제품 요약

AD647 Base AD647 dual precision JFET amplifier family 사용처: Precision Current-to-Voltage Conversion, High-Impedance Sensor Signal Conditioning, Bridge and Instrumentation Measurement, Laboratory Instrumentation Front End, Active Feedback and Probe Buffering, Low-Level Signal Amplification AD647SE Analog Devices 사용처: Precision Current-to-Voltage Conversion, High-Impedance Sensor Signal Conditioning, Bridge and Instrumentation Measurement, Laboratory Instrumentation Front End, Active Feedback and Probe Buffering, Low-Level Signal Amplification
What is the AD647SE?
The AD647SE is an ultralow-drift, dual JFET-input operational amplifier from Analog Devices. According to the Analog Devices AD647 product description, it combines two matched precision amplifiers in one package and uses ion-implantation and laser wafer drift trimming to achieve low drift. It is supplied in a 20-pin CLLCC ceramic package for precision analog applications where input bias current and offset stability are important.
What are the key specifications of AD647SE that engineers should know?
The AD647SE is a dual JFET-input operational amplifier designed for ultralow drift and precision measurement. According to the Analog Devices product description, ion-implantation creates matched JFETs on a monolithic bipolar chip, and laser wafer drift trimming is applied for improved stability. The device is offered in a 20-pin CLLCC ceramic package and supports operation from dual supplies up to ±18 V.
What type of operational amplifier is the AD647SE?
The AD647SE is a dual, precision, JFET-input operational amplifier. Its JFET input stage places it in the low-bias-current precision-amplifier category rather than the general-purpose high-speed amplifier category. Analog Devices describes the AD647 family as an ultralow-drift dual JFET amplifier using ion-implantation and laser wafer drift trimming for accurate low-level signal conditioning.
What supply voltage does AD647SE support?
The AD647SE supports supply voltages up to ±18 V according to the product specifications indexed for AD647SE. This makes it appropriate for conventional dual-supply analog circuits requiring positive and negative rails around ground. The exact minimum operating supply and maximum total rail combination should be confirmed against the manufacturer datasheet before final circuit design.
Where can I download the AD647SE datasheet PDF?
The official Analog Devices product page for the AD647 is available at https://www.analog.com/en/products/ad647.html and is the preferred starting point for manufacturer documentation. The indexed AD647SE document identifies it as an ultralow-drift, dual BiFET operational amplifier in a 20-pin CLLCC package. Use the official product page and its linked datasheet for the authoritative pin description and complete electrical limits.
Where can I find the AD647SE pinout?
The AD647SE uses a 20-pin CLLCC ceramic package, and its authoritative pin assignment should be taken from the Analog Devices AD647 datasheet and the associated package drawing. The public search material confirms the package type and pin count but does not expose a complete numbered pin table. Use the manufacturer pin-description table when assigning every NC, offset-null, supply, and amplifier terminal before PCB release.
What can replace the AD647SE?
The closest identified package-compatible replacement is AD647SE/883B, which appears in the AD647SE/883B product listing and retains the AD647SE/883 family designation. AD647SE/883BH is another identified ordering variant in the same series. Both are military-order-style variants rather than different amplifier technologies, and the exact electrical, temperature, and screening details should be checked before substitution.
Is AD647SE the same as AD647SE/883B?
AD647SE and AD647SE/883B are related AD647 order codes, but the /883 designation generally denotes a screened or military/aerospace ordering option rather than a newly designed amplifier. The available product listing confirms the AD647SE/883B identity and indicates in-stock inventory, while the exact screening and temperature grades must be confirmed in the orderable part documentation. Do not treat the designation difference as proof that every operating specification is identical.
What is the best Analog Devices equivalent for AD647SE?
The best identified Analog Devices-family equivalent is AD647SE/883B because it is explicitly presented as an AD647SE/883 variant associated with the same precision dual JFET amplifier family. AD647SE/883BH is a second ordering option located in the same documentation channel. These options preserve the AD647SE electrical family more closely than unrelated precision amplifiers, although package marking, screening, and lifecycle requirements still require review.
When should I choose AD647SE over another precision amplifier?
Choose the AD647SE when the design specifically benefits from a dual JFET input stage, ultralow drift, closely matched channels, and a 20-pin CLLCC ceramic package. It is particularly appropriate for high-impedance sensing and precision current-to-voltage measurement. Select another amplifier when a smaller plastic package, higher bandwidth, lower cost, rail-to-rail operation, or an active status is more important than the AD647’s drift and matching characteristics.
Is AD647SE suitable for high-impedance sensor conditioning?
Yes, the AD647SE is well suited to high-impedance sensor conditioning because its JFET-input architecture minimizes input bias current while the dual format supports matched signal paths. Analog Devices positions the AD647 as an ultralow-drift dual JFET amplifier for precision measurement. The application still requires checking input bias current, common-mode range, leakage, guarding, and sensor settling behavior against the complete manufacturer electrical specification.
What is the lead time for AD647SE?
The current lead time for AD647SE should be requested through the Request a Quote form on this page because it can change with inventory, package configuration, and order quantity. The manufacturer product page remains the authoritative source for product identity and documentation. For production planning, also request the lifecycle status, screening option, and any manufacturer-imposed ordering constraints with the quotation.
Where can I buy AD647SE online?
AD647SE can be requested through the Request a Quote form on this page, which supports exact-part sourcing without relying on a changing marketplace listing. The manufacturer identifies the product as the AD647 precision dual JFET amplifier, and a marketplace listing also exposes the exact AD647SE ordering code. Provide the desired package, temperature grade, screening requirement, and production quantity when requesting the quotation.
What is the price of AD647SE?
The current AD647SE price should be obtained through the Request a Quote form on this page because pricing depends on exact package, screening, order quantity, and current inventory. The indexed listing identifies AD647SE but does not provide a qualifying quantity-break price table. Submit the exact MPN and required commercial quantities so the quotation can reflect the correct configuration.
Is AD647SE in stock?
Current AD647SE availability should be confirmed through the Request a Quote form on this page. The part has a dedicated manufacturer product page and marketplace identification, but those pages alone do not establish current stock for every package and quantity combination. Request a quotation with your required date, quantity, and screening details for a purchase commitment rather than relying on an unconfirmed listing.

엔지니어링 참조 데이터: AD647SE — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose AD647SE when a legacy precision design requires a dual JFET-input amplifier with ultralow drift and the 20-pin CLLCC ceramic package. It is particularly appropriate for high-impedance sensing, precision transimpedance stages, bridge instrumentation, and paired low-level signal channels where input bias current and offset stability are priorities. Select AD647SE/883B when the board can benefit from its screened ordering designation, provided its exact grade, temperature range, and qualification requirements match the application. Use AD647SE/883BH only when the more specific ordering and environmental requirements are acceptable. If the AD647SE is unavailable for a new design, do not substitute a merely similar precision amplifier without checking package dimensions, pin functions, common-mode range, compensation, noise, drift, and supply requirements. A modern amplifier may require PCB changes and circuit redesign even when its headline offset voltage appears superior.

대체품과의 비교

파라미터 이 제품 AD647SE/883B AD647SE/883BH
Brand Analog Devices Analog Devices Analog Devices
Package 20-pin CLLCC ceramic leaded chip carrier 20-pin CLLCC 20-pin CLLCC
Amplifier Configuration Dual operational amplifier Dual operational amplifier Dual operational amplifier
Input Stage JFET input JFET input JFET input
Primary Design Objective Ultralow drift Ultralow drift Ultralow drift
Maximum Supply Voltage ±18 V ±18 V ±18 V
Matching Technology Ion-implanted JFETs on a monolithic bipolar chip Ion-implanted JFETs on a monolithic bipolar chip Ion-implanted JFETs on a monolithic bipolar chip
Offset Adjustment Method Laser wafer drift trimming Laser wafer drift trimming Laser wafer drift trimming
Ordering Designation AD647SE /883B screened ordering designation /883BH screened ordering designation

주요 차별점

  • Dual matched JFET channels in one ceramic package (vs AD647SE/883B)
  • Ultralow-drift positioning (vs AD647SE/883BH)
  • Low-bias-current JFET input architecture (vs AD647SE/883B)

설계 노트

Treat the AD647SE as a precision analog device even though it is not a high-speed amplifier. Route both channels symmetrically, keep gain-setting and compensation components close to their associated pins, and avoid routing sensitive inputs beneath or beside switching nodes. The ceramic CLLCC package also requires solder-assembly controls that maintain straight leads and adequate thermal contact without introducing mechanical stress.

Use guarding and leakage control on high-impedance inputs. Keep input traces short, clean, and surrounded by a grounded guard where appropriate; surface contamination and humid assembly residues can create leakage comparable to the currents being measured. Place power-supply bypass capacitors immediately across the relevant supply pins and provide a quiet return path so supply current does not modulate the input-reference potential.

Do not assume that every part sharing the AD647 family name has interchangeable screening, temperature, or marking requirements. Confirm the exact order code, pinout, supply limits, common-mode range, offset specifications, and package drawing before replacing AD647SE with an /883 ordering variant. Also verify the stability and compensation requirements of the selected feedback network instead of applying values from a different amplifier topology.

The ceramic package provides a suitable thermal path, but the amplifier still requires airflow or PCB heat-spreading appropriate to its dissipation. Monitor the junction-temperature rise during maximum output swing and worst-case supply operation. Keep the device away from localized heat sources and verify temperature drift at the actual enclosure temperature, since drift performance is most meaningful across the complete intended environmental range.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified for AD647SE. The /883 ordering variants suggest a screened ordering context, but their qualification and environmental requirements must be confirmed from the manufacturer documentation.

데이터 검증일: 2026-11-18 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

AD647SE datasheet AD647SE pinout AD647SE datasheet pdf AD647SE specifications AD647SE equivalent AD647SE replacement AD647SE cross reference AD647SE 20 pin CLLCC AD647SE ultralow drift amplifier AD647SE price AD647SE stock Analog Devices AD647SE AD647SE vs AD647SE/883B AD647SE high impedance sensor AD647SE current to voltage converter

관련 부품 & 용어

Analog Devices AD647SE AD647 AD647SE/883B AD647SE/883BH dual JFET operational amplifier precision operational amplifier JFET input BiFET ion implantation laser wafer drift trimming monolithic bipolar chip input bias current input offset voltage drift 20-pin CLLCC ceramic leaded chip carrier surface mount high-impedance sensor conditioning transimpedance amplifier bridge instrumentation precision measurement laboratory instrumentation signal conditioning matched amplifier channels
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기