Analog Devices

AD745KR-16 - 20MHz Low-Noise J-FET Op Amp | Analog Devices

부품 번호: AD745KR-16 ✓ 활성
16-lead SOIC Package
MOQ: 1 |

AD745KR-16 개요

The Analog Devices AD745KR-16 is a single, low-noise, high-speed J-FET input operational amplifier with 20 MHz gain-bandwidth product, 12.5 V/µs slew rate, and low voltage noise in a 16-lead SOIC package. Its J-FET input stage combines the very low input bias current associated with FET transistors with the low voltage noise and high speed normally associated with bipolar input amplifiers.

An operational amplifier is an analog signal-processing building block that amplifies the voltage difference between its inverting and non-inverting inputs. The AD745 belongs to the precision-amplifier hierarchy, where accurate amplification, low noise, and high bandwidth are more important than saturated-output or high-output-current performance. Its low-noise J-FET input stage makes the device suitable for instrumentation, sensor interfaces, and precision signal-conditioning circuits.

The AD745's headline characteristics include a 20 MHz gain-bandwidth product, a 12.5 V/µs slew rate, and ultralow voltage-noise performance. The 20 MHz bandwidth allows the amplifier to process signals well above the audio range, while the 12.5 V/µs slew rate supports accurate reproduction of large, fast transitions. Because it is a J-FET-input amplifier, the device also offers very low input bias currents, which helps minimize distortion when driven by high-impedance sources.

The AD745 can operate on dual supplies or as a single-supply amplifier when the input and output common-mode ranges permit. Design work should verify the supply voltage, input common-mode range, output swing, stability, and noise specifications against the operating conditions in the manufacturer datasheet. Decoupling capacitors should be placed close to the supply pins, and feedback resistors should be selected to preserve the intended closed-loop bandwidth.

Typical uses include precision current-to-voltage conversion, low-level sensor amplification, photodiode and phototransistor interfaces, audio and communication-signal conditioning, laboratory measurement front ends, and high-impedance buffer stages. The combination of 20 MHz bandwidth, 12.5 V/µs slew rate, and low-noise J-FET inputs is particularly useful when the source impedance is high enough that input bias current would otherwise create unacceptable offset errors.

A key design consideration is that the AD745 is optimized for low-noise, high-speed signal work rather than rail-to-rail input and output operation. Check headroom at both ends of the signal range and account for bias-current-generated error across the source impedance. Feedback-component values and source impedances should also be checked against the amplifier's stability requirements.

This page organizes the AD745KR-16 electrical characteristics, package details, application guidance, same-footprint amplifier alternatives, and design notes in one place. It also identifies which published parameters need confirmation in the manufacturer datasheet, helping engineers move from part selection to a validated analog design.

드롭인 대체품: AD745KR-16 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: AD745KR-16 (동일 폼 팩터 및 풋프린트) — 차이점: Amplifier Type, Mounting Type, Package, Slew Rate.

Analog Devices
Amplifier Type: Voltage-feedback operational amplifier
Mounting Type: Through-hole
Package: 8-pin CERDIP
비교 대상: AD745KR-16 →

AD745JRZ-16

✅ 드롭인
📦 16-lead SOIC
Same AD745 family, 20 MHz bandwidth and 12.5 V/µs slew rate; 0% change in these two headline ratings, with a different grade code

📋 참조 대체품 (카탈로그에 없음)

AD745KRZ-16-REEL7

✅ 드롭인
📦 16-lead SOIC
Same AD745 family and electrical ratings; 0% change in 20 MHz bandwidth and 12.5 V/µs slew rate, with reel packing notation

📋 참조 대체품 (카탈로그에 없음)

AD745ARZ-16

✅ 드롭인 ⚠️ 사양 미검증
📦 16-lead SOIC
Same AD745 family and 16-lead footprint; 0% change in the published 20 MHz bandwidth and 12.5 V/µs slew rate ratings

📋 참조 대체품 (카탈로그에 없음)

AD745BRZ-16

✅ 드롭인 ⚠️ 사양 미검증
📦 16-lead SOIC
Same AD745 family and 16-lead footprint; 0% change in the published 20 MHz bandwidth and 12.5 V/µs slew rate ratings

📋 참조 대체품 (카탈로그에 없음)

AD745CRZ-16

✅ 드롭인 ⚠️ 사양 미검증
📦 16-lead SOIC
Same AD745 family and 16-lead footprint; 0% change in the published 20 MHz bandwidth and 12.5 V/µs slew rate ratings

📋 참조 대체품 (카탈로그에 없음)

AD745KR-16 최대 정격 & 전기적 특성

Amplifier Type Single precision operational amplifier
토폴로지 J-FET input
Number of Circuits 1 circuit
Gain-Bandwidth Product 20 MHz
Slew Rate 12.5 V/µs
패키지 16-lead SOIC
실장 유형 Surface mount

AD745KR-16 16-lead soic 핀 구성 가이드

AD745KR-16(16-lead soic 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

AD745KR-16의 16-lead soic 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: AD745KR-16.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

AD745KR-16 적합 용도: 6 애플리케이션s: Photodiode Signal Conditioning, Precision Sensor Amplification, Current-to-Voltage Conversion, Audio and Communications Conditioning, Laboratory Instrumentation Front End, Precision Buffering.

🧩

Photodiode Signal Conditioning

The AD745KR-16 fits low-level photodiode front ends because its J-FET input stage avoids the large bias-current errors that can arise with bipolar input amplifiers when the source impedance is high. The 20 MHz gain-bandwidth product supports signal-chain bandwidth beyond audio frequencies, while the 12.5 V/µs slew rate allows accurate recovery of fast phototransients. In a transimpedance design, the amplifier converts photocurrent into a proportional voltage, and reverse-bias leakage of the photodiode becomes an important error source. The low input current of the AD745 helps limit that leakage contribution. Keep the feedback resistor and compensation capacitor close to the amplifier, and verify the total input capacitance against the noise and stability requirements in the manufacturer datasheet.

🏭

Precision Sensor Amplification

High-impedance sensors benefit from the AD745KR-16 because its J-FET input stage combines low voltage noise with very low input bias current. This combination reduces the offset and gain errors introduced when the sensor current flows through a large source impedance. The amplifier's 20 MHz gain-bandwidth product permits closed-loop gains that retain useful bandwidth, and its 12.5 V/µs slew rate supports relatively rapid signal movement. The circuit is suitable for resistive sensors, strain-gauge bridges, and capacitive sensing front ends where the source impedance is high. Decoupling, guarding, and clean return paths should be treated as part of the measurement design, since guarding around high-impedance inputs can further reduce leakage pickup.

⚡

Current-to-Voltage Conversion

The AD745KR-16 is useful in transimpedance converters where a small input current must be converted into a measurable voltage. Its low-noise J-FET input reduces the current generated by the amplifier itself, preventing that contribution from being confused with the sensor current. The 20 MHz gain-bandwidth product allows the closed-loop transimpedance bandwidth to extend into the megahertz region when resistor and capacitor values are chosen correctly, while the 12.5 V/µs slew rate helps maintain fidelity on fast current edges. Check the amplifier's input-capacitance limits and the compensation strategy for the exact feedback network. PCB leakage, contaminated boards, and surface moisture can dominate the useful accuracy of this type of measurement.

🌐

Audio and Communications Conditioning

The AD745KR-16 provides enough bandwidth and slew rate for audio-frequency and communications-signal conditioning while retaining the low-noise behavior expected from a precision amplifier. A 20 MHz gain-bandwidth product allows useful closed-loop bandwidth in gain configurations below unity, and the 12.5 V/µs slew rate limits large-signal distortion on faster transitions. The J-FET input stage can be advantageous when the source impedance is high and bias-current distortion would otherwise be significant. In a practical circuit, the feedback network should preserve the intended noise and bandwidth balance rather than using unnecessarily low resistance values. Output drive, load capacitance, and stability must be checked against the selected gain because capacitive loading can alter the effective response.

🖥️

Laboratory Instrumentation Front End

The AD745KR-16 can form the first amplification stage of a laboratory measurement system when the source is high impedance and the signal must be preserved with low added noise. Its 20 MHz gain-bandwidth product supports wide-band measurement channels, and the 12.5 V/µs slew rate provides margin for fast test signals. The single-amplifier configuration reduces board area while retaining a straightforward 16-lead SOIC footprint. Designers should confirm the output swing against the instrument's full-scale range and account for the amplifier's quiescent current in the overall power budget. Short, guarded input routes and solid grounding are particularly important at the microvolt level because induced pickup can otherwise resemble the signal being measured.

🔧

Precision Buffering

The AD745KR-16 can buffer a high-impedance source when the driven load requires more current or lower output impedance than the source can provide. Its low-bias-current J-FET input stage minimizes the loading error introduced at the source, while the 20 MHz gain-bandwidth product and 12.5 V/µs slew rate support signals beyond the audio range. Follower or non-inverting configurations are possible when the amplifier's common-mode and output ranges are compatible with the signal. The load impedance and any connected cable capacitance should be reviewed before layout is finalized, since long interconnects can add capacitance that changes the stability margin. Keep sensitive input nets short and place the bypass capacitor directly across the supply pins.

추천 제품 요약

AD745KRZ-16-REEL7 Same-family 16-lead SOIC ordering option 사용처: Photodiode Signal Conditioning, Precision Sensor Amplification, Laboratory Instrumentation Front End AD745JRZ-16 Same-family precision amplifier 사용처: Photodiode Signal Conditioning, Precision Sensor Amplification, Audio and Communications Conditioning AD745ARZ-16 AD745 family transimpedance amplifier option 사용처: Current-to-Voltage Conversion, Laboratory Instrumentation Front End AD745BRZ-16 AD745 family precision amplifier option 사용처: Current-to-Voltage Conversion, Precision Buffering AD745CRZ-16 Same-family high-speed precision amplifier 사용처: Audio and Communications Conditioning, Precision Buffering
What is the AD745KR-16?
The AD745KR-16 is a single, precision J-FET input operational amplifier from Analog Devices with a 20 MHz gain-bandwidth product and a 12.5 V/µs slew rate. The manufacturer describes it as an ultralow-noise, high-speed BiFET amplifier that combines low voltage noise with very low input bias current. It is supplied in a 16-lead SOIC package for surface-mount instrumentation and signal-conditioning designs.
What are the key specifications of AD745KR-16 that engineers should know?
The AD745KR-16 combines a 20 MHz gain-bandwidth product, 12.5 V/µs slew rate, and J-FET input stage in a 16-lead SOIC package. According to the Analog Devices datasheet, the amplifier is intended for precision applications that need low voltage noise, high speed, and low input bias current simultaneously. Its bandwidth and slew rate make it suitable for signals well beyond the audio range.
What is the difference between a J-FET input amplifier and a bipolar input amplifier?
A J-FET input amplifier generally offers much lower input bias current than a bipolar-input amplifier because the input current does not have to pass through a base-emitter junction. The AD745KR-16 also provides a 20 MHz gain-bandwidth product and 12.5 V/µs slew rate, combining that low-current behavior with high-speed operation. The lower input current is especially useful with high-impedance sensors and photodiode interfaces.
Is the AD745KR-16 suitable for high-impedance sensor interfaces?
Yes, the AD745KR-16 is well suited to high-impedance sensor interfaces because its J-FET input stage minimizes bias-current error and preserves low-noise behavior. The 20 MHz gain-bandwidth product allows closed-loop operation at useful signal frequencies, while the 12.5 V/µs slew rate supports faster signal transitions. Confirm input capacitance, source impedance, and settling requirements in the datasheet.
Where can I download the AD745KR-16 datasheet PDF?
The AD745KR-16 datasheet PDF is available through the manufacturer documentation listed on the product pages and through the electronic-document link on this page. The document identifies the amplifier as a 20 MHz, 12.5 V/µs J-FET precision op amp in a 16-lead SOIC package. Use the pin-description and electrical-characteristics tables when assigning PCB functions and checking operating limits.
Where can I find the AD745KR-16 pinout?
The authoritative AD745KR-16 pin assignment is shown in the pin-configuration diagram of the Analog Devices datasheet. Use that diagram to identify the supply pins, inverting input, non-inverting input, and output for the 16-lead SOIC. The manufacturer datasheet should also be checked for the exposed pad, thermal pad, and any no-connect or reserved-pin instructions before routing the board.
What is the AD745KR-16 voltage noise performance?
Analog Devices describes the AD745KR-16 as an ultralow-noise, high-speed J-FET input operational amplifier. Its published headline performance includes a 20 MHz gain-bandwidth product and 12.5 V/µs slew rate. The exact voltage-noise density depends on the referenced frequency and gain configuration, so use the noise characteristics and noise-figure information in the manufacturer datasheet for the final noise budget.
AD745KR-16 vs AD745JRZ-16 - which one should I choose?
Both parts belong to the AD745 family and use the same 16-lead SOIC footprint, but their grade and ordering options differ. The AD745KR-16 is identified as the K-grade ordering option, while the AD745JRZ-16 appears in published comparison listings. Choose using the manufacturer's grade, temperature-range, and qualification tables rather than assuming that the letter code alone defines electrical performance.
What is the best drop-in replacement for AD745KR-16?
The closest same-family drop-in options are other AD745 16-lead SOIC orderings, including AD745JRZ-16 and AD745KRZ-16-REEL7, subject to grade-specific operating conditions. A true replacement must match the SOIC land pattern, pin functions, supply range, common-mode range, stability behavior, and required temperature grade. The reel designation identifies packing, not a different electrical device.
Can AD745JRZ-16 replace AD745KR-16 without PCB changes?
AD745JRZ-16 is an AD745-family device in the same 16-lead SOIC package, so it is the strongest published same-family replacement candidate for the AD745KR-16. Before exchanging it, verify the exact pin configuration, supply voltage, input and output ranges, gain-bandwidth product, slew rate, and temperature grade in the manufacturer datasheets. Ordering-code suffixes such as reel markings must not be treated as electrical differences.
When should I choose the AD745KR-16 instead of a general-purpose amplifier?
Choose the AD745KR-16 when the design needs very low input bias current, low noise, and useful high-frequency response in the same amplifier. Its 20 MHz gain-bandwidth product and 12.5 V/µs slew rate exceed many general-purpose precision amplifiers, while the J-FET input stage suits high-source-impedance circuits. Select a rail-to-rail or general-purpose part instead when that part better matches required supply and common-mode limits.
Is AD745KR-16 an automotive-grade amplifier?
Automotive qualification cannot be concluded from the AD745KR-16 ordering code alone. Automotive-grade versions normally carry a distinct qualification designation, so the part-specific datasheet and Analog Devices product documentation should be checked for AEC-Q100 status and temperature grade. Use a specifically qualified ordering option when automotive requirements apply rather than assuming the standard K-grade part is qualified.
How should I decouple the AD745KR-16 power supply pins?
Place the supply bypass capacitors directly beside the amplifier's positive and negative supply pins, keeping the connection between each capacitor and its pin as short as practical. Include a small ceramic capacitor for high-frequency bypassing and a larger local capacitor where the power rail needs additional energy storage. Confirm the recommended capacitance and stability conditions in the manufacturer datasheet and layout guidance.
Where can I buy AD745KR-16 and what is the price?
Use the Request a Quote form on this page to request current AD745KR-16 pricing, stock confirmation, and lead time. Quote requests are the appropriate commercial channel because amplifier pricing and availability can change with order quantity, date code, and packaging. Provide the required quantity, reel or tube preference, and target date so the order can be reviewed accurately.
What is the lead time for AD745KR-16?
The current lead time for AD745KR-16 should be confirmed through the Request a Quote form on this page. Lead time depends on the manufacturer schedule, the quantity ordered, and the selected packing format. Include the required shipment date and annual usage with the request so the proposed schedule reflects the actual production plan.

엔지니어링 참조 데이터: AD745KR-16 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the AD745KR-16 when a signal chain needs very low input bias current, low voltage noise, and bandwidth beyond the audio range in a single precision amplifier. Its 20 MHz gain-bandwidth product and 12.5 V/µs slew rate make it appropriate for high-impedance sensors, photodiode interfaces, transimpedance circuits, and instrumentation. Other AD745 16-lead SOIC orderings can be considered when their documented grade or packing code better matches the production plan, but verify supply range, common-mode limits, temperature grade, and qualification for the exact part. Select a different amplifier family when the design specifically requires rail-to-rail input and output, unity-gain stability into a particular load, or a power-supply range that the AD745 does not support. Because all listed alternatives belong to the same family and package, the decisive checks are electrical limits, grade, qualification, and availability rather than PCB footprint.

대체품과의 비교

파라미터 이 제품 AD745JRZ-16 AD745KRZ-16-REEL7 AD745ARZ-16 AD745BRZ-16 AD745CRZ-16
Package 16-lead SOIC 16-lead SOIC - same footprint 16-lead SOIC - same footprint 16-lead SOIC - same footprint 16-lead SOIC - same footprint 16-lead SOIC - same footprint
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Amplifier Type Single precision J-FET operational amplifier Single J-FET operational amplifier Single J-FET operational amplifier Single J-FET operational amplifier Single J-FET operational amplifier Single J-FET operational amplifier
Gain-Bandwidth Product 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz
Slew Rate 12.5 V/µs 12.5 V/µs 12.5 V/µs 12.5 V/µs 12.5 V/µs 12.5 V/µs
Input Stage J-FET J-FET J-FET J-FET J-FET J-FET
Number of Circuits 1 1 1 1 1 1
Ordering Option Difference AD745KR-16 Different grade code Reel packing notation Different grade code Different grade code Different grade code

주요 차별점

  • Combines J-FET input behavior with substantial signal bandwidth (vs AD745JRZ-16)
  • Single-amplifier implementation reduces analog footprint (vs AD745KRZ-16-REEL7)
  • Supports low-impedance-error sensing and fast signal recovery (vs AD745ARZ-16)

설계 노트

Place the supply bypass capacitor immediately across the positive and negative supply pins, with very short traces and a direct ground return. For high-impedance input circuits, minimize copper area around the input pins, remove flux residue, and consider guarding. These steps matter because an AD745's low-noise performance cannot be recovered if leakage, contamination, or switching pickup is already present at the input.

Account for source capacitance and the combined parasitic capacitance of the feedback network when working with the AD745's 20 MHz gain-bandwidth product. Long feedback traces or excessive load capacitance can change the effective settling behavior. Keep the feedback loop compact, connect the inverting input directly to the feedback network, and evaluate the final PCB with a scope before releasing the design for production.

Do not assume that every AD745 ordering code has identical temperature or qualification requirements. Confirm the grade code, supply range, common-mode range, and output swing in the manufacturer datasheet for the exact ordering option. When substituting a family member, verify the physical lead mapping and electrical limits rather than relying only on the shared 16-lead SOIC package name.

Use the lowest supply voltage that satisfies the signal, common-mode, and output-swing requirements while leaving suitable headroom for temperature and tolerance variation. The 12.5 V/µs slew rate can produce high dynamic demand during fast output transitions, so the supply network must remain low impedance at signal frequencies. Separate sensitive analog routing from switching-node and high-current return paths where the board layout permits.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Compliance and qualification statements were not explicitly identified for this ordering code. Confirm RoHS, REACH, halogen-free, conflict-minerals, and AEC-Q100 status on the manufacturer product page and in the latest manufacturer documentation.

데이터 검증일: 2026-11-18 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

AD745KR-16 datasheet AD745KR-16 pinout AD745KR-16 datasheet pdf AD745KR-16 equivalent AD745KR-16 replacement AD745KR-16 vs AD745JRZ-16 AD745KR-16 SOIC-16 footprint AD745KR-16 20MHz amplifier AD745KR-16 12.5V/us slew rate Analog Devices AD745KR-16 AD745KR-16 price AD745KR-16 stock AD745KR-16 photodiode amplifier AD745KR-16 high impedance sensor what is the slew rate of AD745KR-16

관련 부품 & 용어

Analog Devices AD745KR-16 AD745JRZ-16 AD745KRZ-16-REEL7 AD745ARZ-16 AD745BRZ-16 AD745CRZ-16 operational amplifier precision amplifier J-FET input BiFET gain-bandwidth product slew rate voltage noise input bias current input offset voltage transimpedance amplifier photodiode interface high-impedance sensor signal conditioning 16-lead SOIC surface mount analog-to-digital converter front end precision measurement RoHS REACH AEC-Q100
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기