Analog Devices

AD602JRZ - Dual 35MHz Variable Gain Amplifier | Analog Devices

부품 번호: AD602JRZ ✓ 활성
Up to +5.25 V Vdss 16-lead SOIC Package
MOQ: 1 |

AD602JRZ 개요

The Analog Devices AD602JRZ is a dual-channel, low-noise, wideband variable gain amplifier with independent channels, a nominal 35 MHz −3 dB bandwidth, and adjustable gain from −10 dB to +30 dB per channel. It is packaged in a 16-lead SOIC and operates from dual positive and negative supplies of up to ±5.25 V. The device is designed for ultrasound imaging systems and other signal chains requiring precise gain control, low noise, low distortion, and wide bandwidth.

A variable gain amplifier, or VGA, is a linear amplifier whose gain can be adjusted by an external control signal. In the broader semiconductor hierarchy, a VGA belongs to the amplifier IC and analog signal-processing categories. AD602VGAs are commonly positioned ahead of analog-to-digital converters, where received or reflected signals vary widely in amplitude and must be normalized before digitization. The AD602 combines that adjustable gain with two independent channels, allowing simultaneous processing of two signal paths.

The AD602 provides a −10 dB to +30 dB gain range, 31.07 dB maximum gain, and a nominally gain-independent 35 MHz −3 dB bandwidth. Its gating control input is compatible with TTL and CMOS logic. These characteristics make the amplifier suitable for systems in which the gain-control voltage must interface directly with digital control hardware while the analog signal remains wideband.

Each of the two amplifier channels has its own gain-control input, allowing the channels to be adjusted independently rather than sharing a common gain command. The broad bandwidth can support ultrasound echo reception, medical imaging, instrumentation, and other wideband analog systems. The −10 dB lower gain range also provides attenuation capability that can help control signal level before downstream conversion or filtering stages.

Typical uses include receive channels in ultrasound imaging equipment, dual-axis sensor interfaces, communications and instrumentation front ends, and precision analog measurement systems. In an ultrasound receiver, the amplifier can normalize the amplitude of returning echoes before they reach an ADC. Independent dual-channel adjustment is valuable when the two channels carry different signal amplitudes or require different attenuation settings.

Designers should preserve adequate supply headroom and use the manufacturer-recommended decoupling and gain-control interface practices. The gain-control voltage range, output swing, and input common-mode limits must be checked against the actual signal chain. Because wideband amplifiers amplify noise as well as signal, input shielding, grounding, source impedance, and controlled impedance routing are important to achieving the intended system noise performance.

This page organizes the AD602JRZ electrical characteristics, supply requirements, package information, application guidance, comparison criteria, and design considerations into a practical engineering reference. It also distinguishes exact drop-in alternatives from related AD600 and AD602 variants whose gain ranges, temperature grades, or delivery packaging differ, helping engineers avoid replacements that require board or circuit changes.

드롭인 대체품: AD602JRZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: AD602JRZ (동일 폼 팩터 및 풋프린트) — 차이점: Package, Gain Range, Operating Temperature, Product Type, Signal Type.

Analog Devices
Package: 16-pin SOIC
Operating Temperature: -40°C to +85°C
Product Type: Dual-channel variable gain amplifier
비교 대상: AD602JRZ →
Analog Devices
Product Type: Dual variable gain amplifier
Signal Type: Dual analog input and output signal channels
비교 대상: AD602JRZ →
Analog Devices
Gain Range: -10 dB to +30 dB
Signal Type: Analog
비교 대상: AD602JRZ →

AD602ARZ

✅ 드롭인
Analog Devices
📦 16-lead SOIC
Dual variable gain amplifier · 2 channels · 2 independent channels · 11.25 dB to 31 dB per channel · Low-noise architecture · Wideband · Dual analog input and output signal channels · Ultrasound imaging

가격 문의

데이터시트 보기 →

AD602JRZ 최대 정격 & 전기적 특성

Amplifier Type Dual-channel variable gain amplifier
Number of Channels 2 channels
Gain Range −10 dB to +30 dB per channel
Maximum Gain 31.07 dB
−3 dB Bandwidth 35 MHz nominal
Bandwidth Dependence on Gain Nominally independent of gain
Positive Supply Voltage Up to +5.25 V
Negative Supply Voltage Down to −5.25 V
Total Supply Span Up to 10.5 V
Gain Control Logic Compatibility TTL- and CMOS-compatible
패키지 16-lead SOIC
실장 유형 Surface mount
동작 온도 0°C to +70°C

AD602JRZ 16-lead soic 핀 구성 가이드

AD602JRZ(16-lead soic 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

AD602JRZ의 16-lead soic 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: AD602JRZ.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

AD602JRZ 적합 용도: 6 애플리케이션s: Ultrasound Imaging Receive Channels, Medical Ultrasound Echo Normalization, Dual-Channel Instrumentation, Wideband Sensor Signal Conditioning, Communications Receive Front Ends, Precision Analog Measurement Systems.

🏥

Ultrasound Imaging Receive Channels

The AD602JRZ fits ultrasound receive front ends because each channel provides adjustable gain from −10 dB to +30 dB across a nominal 35 MHz bandwidth. Place the amplifier between the transducer or receiver network and the ADC so returning echoes can be attenuated or amplified according to signal strength. Independent channel control permits asymmetric attenuation when two receive paths carry different levels. The broad bandwidth is essentially independent of gain, which simplifies system calibration, while low noise and low distortion help preserve weak echo information before digitization.

💊

Medical Ultrasound Echo Normalization

The AD602JRZ can normalize variable-amplitude medical echo signals before conversion by an ADC. Its −10 dB lower limit provides attenuation in addition to the +30 dB upper range, allowing receive electronics to accommodate a broad spread of echo strengths. The 35 MHz nominal bandwidth supports wideband acoustic signal paths, while TTL- and CMOS-compatible gating control permits direct connection to digital control logic. Designers should account for the gain-control transfer characteristic and valid output swing when defining the ultrasound system’s attenuation calibration table.

🔧

Dual-Channel Instrumentation

The two independently adjustable channels of the AD602JRZ suit instrumentation that processes two related analog signals and requires separate attenuation settings. Its 35 MHz nominal bandwidth accommodates faster measurement nodes than many precision low-frequency amplifiers, while the −10 dB to +30 dB range provides practical control over signal level. The device is useful ahead of data converters or sampling circuits when transducer output amplitude changes substantially. Grounding and input-impedance management remain important because a wideband gain stage can magnify source noise as well as the intended signal.

🧩

Wideband Sensor Signal Conditioning

The AD602JRZ is appropriate for sensor interfaces whose output amplitude varies with stimulus or distance and needs electronic attenuation before downstream processing. Its −10 dB to +30 dB gain range permits coarse level control, and the nominal 35 MHz bandwidth is independent of gain, reducing the need to recalculate bandwidth across operating points. A TTL- and CMOS-compatible gating input simplifies control by digital systems. For high-frequency sensor cabling, use controlled impedance and short ground returns to prevent reflections and coupling from degrading the measured signal.

🌐

Communications Receive Front Ends

The AD602JRZ can serve as a wideband gain-control stage in communications equipment where received signal strength must be adjusted before filtering or conversion. Independent dual-channel control allows separate attenuation paths, and the 35 MHz nominal bandwidth supports high-speed analog nodes. The control input accepts TTL- and CMOS-compatible signals, which simplifies integration with a digital gain controller. Designers should verify the AD602 gain-control voltage range and signal bandwidth, minimize trace coupling, and maintain output swing so adjacent-channel or mixer overload is avoided.

📡

Precision Analog Measurement Systems

The AD602JRZ fits measurement systems that require programmable signal level without sacrificing the nominal 35 MHz bandwidth. Its two channels provide separate attenuation commands, allowing calibration paths or differential acquisition chains to be adjusted independently. The −10 dB lower gain limit can prevent saturation in high-amplitude measurements, while the +30 dB maximum range supports amplification of smaller signals. Use short, shielded analog connections and carefully decoupled dual supplies to retain low-noise and low-distortion performance across the full gain range.

What is the AD602JRZ?
The AD602JRZ is a dual-channel, low-noise variable gain amplifier optimized for ultrasound imaging and other wideband precision signal chains. Each independent channel provides adjustable gain from −10 dB to +30 dB, with a nominal 35 MHz −3 dB bandwidth. According to the Analog Devices AD600/AD602 datasheet, the device is supplied in a 16-lead SOIC and uses separate positive and negative analog supplies.
What are the key specifications of AD602JRZ that engineers should know?
The AD602JRZ combines two independent amplifier channels, a −10 dB to +30 dB gain range, and a nominal 35 MHz −3 dB bandwidth in a 16-lead SOIC. The manufacturer datasheet lists maximum gain as 31.07 dB, states that bandwidth is essentially independent of gain, and identifies the gain-control input as TTL- and CMOS-compatible. Its supply limits extend to +5.25 V and −5.25 V.
What is the operating voltage of AD602JRZ?
The AD602JRZ operates from dual supplies reaching +5.25 V and −5.25 V, giving a maximum total supply span of 10.5 V. The Analog Devices product material and distributor specifications identify the device as a dual-supply variable gain amplifier. Use separate positive and negative bypass paths close to the supply pins to maintain stable operation across the full 35 MHz bandwidth.
What is the bandwidth of AD602JRZ?
The nominal −3 dB bandwidth of the AD602JRZ is 35 MHz. According to the Analog Devices manufacturer datasheet for the AD600/AD602 family, this bandwidth is essentially independent of the selected gain setting. That relationship allows a system to preserve usable bandwidth while changing attenuation over the device's −10 dB to +30 dB gain range.
Where can I download the AD602JRZ datasheet PDF?
The official AD600/AD602 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD600_602.pdf. It contains the AD602 gain-control, electrical-characteristics, gain-response, noise, distortion, supply-current, and pin-connection information. The AD602 product page at analog.com/en/products/ad602.html provides the linked documentation and product-selection resources.
Where can I find the AD602JRZ pinout?
The AD602JRZ pin assignments are shown in the pin-configuration section of the official AD600/AD602 datasheet PDF. The device uses a 16-lead SOIC with separate signal and gain-control connections for each amplifier channel. Before assigning PCB tracks, use the datasheet pin table to confirm each lead function, power connection, and exposed electrical requirement rather than inferring connections from another amplifier package.
Is AD602JRZ suitable for ultrasound imaging?
Yes, the AD602JRZ is specifically optimized for ultrasound imaging systems that require precise gain, low noise, low distortion, and wide bandwidth. Its two channels can be adjusted independently, its gain range is −10 dB to +30 dB, and its nominal 35 MHz bandwidth is largely independent of gain. These characteristics suit dual receive paths or other ultrasound front ends that require electronic attenuation before ADC conversion.
When should I choose AD602JRZ over AD600JRZ?
Choose AD602JRZ when the signal chain needs a lower gain floor of −10 dB and a maximum gain of approximately 31.07 dB. Choose AD600JRZ when the application requires attenuation from 0 dB through approximately 41.07 dB maximum gain. Although both devices appear in the same AD600/AD602 family and may share package arrangements, their 10 dB gain-range difference must be included in receiver calibration and control firmware.
What is the difference between AD602JRZ and AD602ARZ?
AD602JRZ and AD602ARZ are closely related AD602 dual variable gain amplifier variants in the same 16-lead SOIC family. Their core gain range of −10 dB to +30 dB and nominal 35 MHz bandwidth make AD602ARZ the closest documented same-brand alternative, but the manufacturer must be consulted for ordering-temperature and qualification details before substitution. Confirm the exact temperature grade and full pin compatibility in the AD600/AD602 datasheet.
What is the best drop-in replacement for AD602JRZ?
The closest documented drop-in candidate is the Analog Devices AD602ARZ, because it belongs to the same AD602 dual-channel variable gain amplifier family and uses the same 16-lead SOIC format. No unrelated amplifier should be treated as a drop-in replacement without a verified pin-by-pin comparison. For AD602JRZ-RL and AD602JRZ-R7, the distinguishing element is reel or tape-and-reel delivery packaging rather than a different circuit function.
Can AD602JRZ be replaced without changing the PCB?
A PCB-compatible replacement is possible only when the substitute has the same 16-lead SOIC footprint, matching signal pins, compatible gain-control pins, and equivalent electrical limits. AD602ARZ is the closest same-family candidate, but temperature-grade details should be confirmed. AD602JRZ-RL and AD602JRZ-R7 also represent the same circuit in different reel configurations, although delivery-code variants are not counted as distinct engineering alternatives.
Is AD602JRZ in stock and what is its lead time?
Current stock and a guaranteed lead time should be requested through the Request a Quote form on this page. The official Analog Devices product page lists the AD602 family and its product-selection resources, while distributor pages provide changing availability information. For production planning, state the required quantity, date code, delivery package, and target assembly location with the quotation request.
What is the price of AD602JRZ?
Current AD602JRZ pricing should be obtained through the Request a Quote form on this page so the response reflects quantity, date code, and packaging requirements. The official Analog Devices product page presents family-level list pricing rather than a guaranteed quotation for the exact ordering code. Submit the exact MPN and required commercial quantity to receive a current unit-price schedule and availability confirmation.
Where can I buy AD602JRZ online?
Use the Request a Quote form on this page to request AD602JRZ availability, current pricing, and lead time. Providing the exact 16-lead SOIC ordering code helps avoid confusion with AD600-family devices and reel-code variants. The request should include your annual and prototype quantities, acceptable date-code age, and required tape-and-reel or other delivery format.
How should I design the power and layout around AD602JRZ?
Place the positive and negative bypass capacitors close to their respective supply pins, and route the two channels as separate controlled-impedance paths. Keep the gain-control traces away from high-energy analog inputs and preserve the datasheet-recommended grounding topology. Because the device supports a nominal 35 MHz bandwidth, component placement, return paths, connector geometry, and shielding can materially affect noise and distortion.

엔지니어링 참조 데이터: AD602JRZ — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose AD602JRZ when the design requires a dual-channel variable gain amplifier with a −10 dB to +30 dB range, a nominal 35 MHz bandwidth, and independently adjustable channels. AD602ARZ is the closest documented same-brand candidate because it uses the same AD602 family and 16-lead SOIC format; confirm its ordering-temperature details and final qualification status before substitution. Do not select an AD600 variant when the lower gain limit or gain-control calibration is fixed by the existing system, because AD600 starts at 0 dB and reaches approximately 41.07 dB instead of 31.07 dB. AD602JRZ-RL and AD602JRZ-R7 represent delivery-code differences rather than distinct circuit choices. For any proposed replacement, verify the pin table, supply limits, gain-control transfer characteristic, output swing, temperature range, and acquisition plan.

대체품과의 비교

파라미터 이 제품 AD602ARZ
Package 16-lead SOIC 16-lead SOIC
Brand Analog Devices Analog Devices
Number of Channels 2 channels 2 channels
Gain Range −10 dB to +30 dB −10 dB to +30 dB
Maximum Gain 31.07 dB 31.07 dB
−3 dB Bandwidth 35 MHz nominal 35 MHz nominal
Positive Supply Limit +5.25 V +5.25 V
Negative Supply Limit −5.25 V −5.25 V
Gain Control Logic TTL- and CMOS-compatible TTL- and CMOS-compatible

주요 차별점

  • Independent dual-channel gain adjustment (vs AD602ARZ)
  • Gain-independent wideband operation (vs AD602ARZ)
  • Direct digital control compatibility (vs AD602ARZ)

설계 노트

Use separate positive and negative supply rails reaching no more than +5.25 V and −5.25 V. Place the positive and negative bypass capacitors close to the corresponding supply pins and follow the decoupling values and topology in the manufacturer datasheet. Because the nominal 35 MHz bandwidth can expose power-supply impedance and coupling, keep high-current return paths away from the analog inputs and gain-control nodes.

Route each channel as a controlled-impedance analog path and keep the gain-control traces away from input and output routing. Short ground returns and continuous reference planes reduce susceptibility to common-mode noise and high-frequency coupling. The two channels are independent, but maintaining consistent grounding, symmetry, and connector geometry helps prevent channel-to-channel differences from appearing as calibration errors.

Validate the source impedance, cable length, and input filtering against the amplifier’s 35 MHz nominal bandwidth. A gain-stage bandwidth is not the only limit in a wideband signal chain: source impedance can create gain peaking, reflections can distort step responses, and long interconnect can increase noise coupling. Use the datasheet gain-versus-frequency information when setting system bandwidth and do not assume the −3 dB point is independent of every external impedance.

Do not treat an AD600-family amplifier as an interchangeable AD602 device merely because both appear in the same datasheet and family. AD600 offers a 0 dB to +40 dB range, whereas AD602 provides −10 dB to +30 dB. Confirm gain-control polarity, range, transfer curve, supply conditions, and output limits before programming a replacement. Reel-code variants do not provide different electrical performance.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The official product page and manufacturer datasheet links were identified, but explicit environmental, automotive-qualification, halogen-free, and conflict-minerals statements require confirmation from current manufacturer documentation.

데이터 검증일: 2026-11-18 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

AD602JRZ datasheet AD602JRZ pinout AD602JRZ datasheet pdf AD602JRZ equivalent AD602JRZ replacement AD602JRZ cross reference AD602JRZ schematic AD602JRZ ultrasound amplifier AD602JRZ 35MHz VGA AD602JRZ SOIC-16 pinout AD602JRZ vs AD600JRZ AD602JRZ price AD602JRZ stock Analog Devices AD602JRZ

관련 부품 & 용어

Analog Devices AD602JRZ AD602ARZ AD600JRZ AD600ARZ AD602 family AD600 family variable gain amplifier VGA dual-channel amplifier analog signal processing amplifier IC semiconductor gain control TTL-compatible control CMOS-compatible control ultrasound imaging medical imaging instrumentation −10 dB gain +30 dB gain 35 MHz bandwidth 16-lead SOIC surface-mount package
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기