Analog Devices

AD8002ARZ - 600MHz Dual Amp | Analog Devices | 8-SOIC

부품 번호: AD8002ARZ ✓ 활성
5.0 mA per amplifier Vdss 8-SOIC Package
MOQ: 1 |

AD8002ARZ 개요

The Analog Devices AD8002ARZ is a dual, low-power, high-speed current-feedback amplifier with 600 MHz small-signal bandwidth at a gain of +1, 500 MHz bandwidth at a gain of +2, and a 1200 V/us slew rate, housed in an 8-SOIC package. Each amplifier is designed for low-power operation with a maximum supply current of 5.0 mA per amplifier and a maximum power consumption of 50 mW per amplifier.

A current-feedback amplifier is a voltage-feedback amplifier subclass in which bandwidth and stability behavior depend partly on the feedback resistor rather than solely on closed-loop gain. Current-feedback amplifiers are frequently used where high speed, controlled gain, and drive capability must coexist. In the broader electronics hierarchy, the AD8002ARZ is an operational amplifier, signal-conditioning amplifier, and analog semiconductor intended for high-frequency video and data-conversion signal paths.

The AD8002ARZ features low differential gain error of 0.01% and differential phase error of 0.02°. Its gain flatness is 0.1 dB through 60 MHz, while settling to 0.1% takes 16 ns. These characteristics make the device suitable for video buffering, analog-to-digital converter interfaces, instrumentation, and other wideband systems requiring rapid signal transitions and low amplitude and phase distortion.

Analog Devices describes the AD8002 as a dual amplifier with transimpedance linearization circuitry. That architecture helps maintain differential gain and phase performance when driving video loads, including the 150-ohm load conditions cited in the manufacturer data sheet. The device operates from dual ±5 V supplies, providing a straightforward implementation for professional video, broadcast, industrial imaging, and test-and-measurement systems that already use positive and negative rails.

Typical applications include composite and component video amplification, high-speed ADC input conditioning, active filtering, and general-purpose high-speed signal processing. In a video path, the amplifier can preserve signal amplitude and phase relationships across a broad frequency range. For data converters, its 600 MHz bandwidth and 16 ns settling time can reduce timing margin when the source impedance, feedback network, and trace topology are controlled correctly.

Design should begin with the manufacturer pinout and feedback-network guidance, because current-feedback amplifiers require careful resistor selection and impedance control. Keep feedback-loop routing compact, use low-inductance interconnections, and account for amplifier input and output parasitics when operating close to the device's bandwidth. Power-supply bypass capacitance should be placed close to the supply pins, with the return path arranged to minimize high-frequency loop area.

This page combines manufacturer specifications, package and lifecycle information, practical circuit guidance, and structured comparisons for engineers evaluating the AD8002ARZ. It also identifies the available same-family order options while clearly separating confirmed drop-in options from functionally similar parts that require separate engineering review.

드롭인 대체품: AD8002ARZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

AD8002AR

✅ 드롭인
📦 8-SOIC
Same 600 MHz dual current-feedback amplifier family and 8-SOIC package; 0 MHz bandwidth difference, while suffix-specific ordering conditions require review

📋 참조 대체품 (카탈로그에 없음)

AD8002ARZ-R7

✅ 드롭인
📦 8-SOIC
Same 600 MHz dual current-feedback amplifier family and 8-SOIC package; 0 MHz bandwidth difference, with reel ordering code differing from AD8002ARZ

📋 참조 대체품 (카탈로그에 없음)

AD8002ARZ-RL

✅ 드롭인
📦 8-SOIC
Same 600 MHz dual current-feedback amplifier family and 8-SOIC package; 0 MHz bandwidth difference, with reel ordering code differing from AD8002ARZ

📋 참조 대체품 (카탈로그에 없음)

AD8002ARZ 최대 정격 & 전기적 특성

Product Type Dual current-feedback amplifier
Number of Amplifier Channels 2 circuits
Small-Signal Bandwidth at Gain +1 600 MHz
Small-Signal Bandwidth at Gain +2 500 MHz
Slew Rate 1200 V/us
Settling Time to 0.1% 16 ns
Maximum Supply Current 5.0 mA per amplifier
Maximum Power Consumption 50 mW per amplifier
Differential Gain Error 0.01%
Differential Phase Error 0.02 degrees
Gain Flatness 0.1 dB through 60 MHz
공급 전압 +/-5 V
Reference Video Load 150 ohm
패키지 8-SOIC
실장 유형 Surface mount
Production Status Production

AD8002ARZ 8-soic 핀 구성 가이드

AD8002ARZ(8-soic 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

AD8002ARZ의 8-soic 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: AD8002ARZ.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

AD8002ARZ 적합 용도: 6 애플리케이션s: Composite Video Signal Conditioning, High-Speed ADC Input Interface, Professional Video Distribution, Active Video Filtering, High-Speed Instrumentation Buffer, Industrial Imaging Signal Path.

📺

Composite Video Signal Conditioning

The AD8002ARZ fits composite video amplification because it combines 600 MHz bandwidth at gain +1 with 0.1 dB gain flatness through 60 MHz. The Analog Devices AD8002 Data Sheet (Rev. E) identifies 0.01% differential gain error, 0.02-degree differential phase error, and 150-ohm video-load capability. Placing the amplifier close to the source reduces trace loss before the signal reaches routing and distribution circuitry. The design should use the manufacturer's feedback network and keep output routing short to limit parasitic capacitance, which is important at this bandwidth.

📡

High-Speed ADC Input Interface

AD8002ARZ is suitable for conditioning signals entering high-speed analog-to-digital converters when wide bandwidth and fast settling are required. Its 600 MHz bandwidth at gain +1 and 16 ns settling to 0.1% provide timing margin around the sampling aperture, while 0.01% differential gain error helps limit amplitude conversion error. The amplifier should be placed adjacent to the converter or connector, with short high-impedance input routing and a controlled feedback resistor. Supply bypassing and ground-return layout must prevent converter switching activity from modulating the input signal.

🎥

Professional Video Distribution

The dual AD8002ARZ can provide two independent wideband channels for professional video distribution or monitoring equipment operating from ±5 V rails. Each channel offers 500 MHz bandwidth at gain +2 and 1200 V/us slew rate, allowing large-amplitude video transitions to remain fast and controlled. Gain flatness of 0.1 dB through 60 MHz and differential phase error of 0.02 degrees support faithful signal reproduction. Practical layouts should use short output paths, local decoupling, and controlled source and load impedances to prevent reflections or unintended high-frequency peaking.

⚡

Active Video Filtering

AD8002ARZ can implement active filtering stages in wideband video and instrumentation systems where conventional low-bandwidth op amps would limit signal bandwidth. Its 600 MHz gain +1 bandwidth, 1200 V/us slew rate, and 50 mW maximum power consumption per amplifier provide a useful combination of speed and efficiency. Component tolerances, resistor parasitics, and capacitor self-resonance should be selected to keep the intended response. Because current-feedback topology depends on feedback impedance, stage values and stability margins should be calculated from the manufacturer's guidance rather than transferred directly from a voltage-feedback design.

🔧

High-Speed Instrumentation Buffer

The AD8002ARZ is useful as a wideband instrumentation buffer when preserving fast transient information is more important than minimizing power. A 500 MHz bandwidth at gain +2 and 16 ns settling to 0.1% allow the device to follow rapidly changing signals with limited amplitude error. The dual configuration provides independent channels for differential or multi-node measurements. Source impedance must remain compatible with the selected feedback network, and the input stage should avoid long probe or cable paths that introduce inductance and capacitance before the amplifier's input pins.

🏭

Industrial Imaging Signal Path

AD8002ARZ fits industrial imaging and sensor-interface circuits that process high-bandwidth analog signals while keeping amplifier power modest. Each channel is specified for 5.0 mA maximum supply current and 50 mW maximum power consumption per amplifier, which can simplify thermal planning in multi-channel systems. The 600 MHz bandwidth and 1200 V/us slew rate help preserve pulse edges, while the low gain and phase errors support calibrated amplitude and timing relationships. Place the amplifier near the sensor interface, use short differential or single-ended routes as appropriate, and decouple each supply rail at the device.

Where can I buy AD8002ARZ online?
AD8002ARZ can be requested through the Request a Quote form on this page. The form is the appropriate route for checking current unit availability, order quantity, shipment timing, and package-specific sourcing without relying on a stale listing. The AD8002ARZ is an Analog Devices dual current-feedback amplifier in an 8-SOIC package, and requests should identify the exact AD8002ARZ ordering code.
What is the price of AD8002ARZ?
Current AD8002ARZ pricing is handled through the Request a Quote form on this page. The form can reflect current inventory, volume breaks, and confirmed shipment information for the exact 8-SOIC ordering code. According to the Analog Devices AD8002 product page, the AD8002 family is in production, while actual commercial terms for AD8002ARZ depend on quantity and current sourcing conditions.
What is the lead time for AD8002ARZ?
The current AD8002ARZ lead time and minimum order quantity should be confirmed through the Request a Quote form on this page. The Analog Devices AD8002 product page identifies the family as being in production, which supports new sourcing and planned designs. For production scheduling, provide the requested quantity, date-code requirements, shipment destination, and whether tape-and-reel packaging is required.
Is AD8002ARZ in stock?
AD8002ARZ availability should be checked through the Request a Quote form on this page rather than inferred from a general product listing. The exact 8-SOIC device is listed as a production Analog Devices part, and the form can return a current stock and lead-time response for the requested quantity. Include any traceability or date-code requirements when requesting the quotation.
What are the key specifications of AD8002ARZ that engineers should know?
The AD8002ARZ is a dual current-feedback amplifier offering 600 MHz bandwidth at gain +1, 500 MHz bandwidth at gain +2, a 1200 V/us slew rate, and 16 ns settling to 0.1%. According to the Analog Devices AD8002 Data Sheet (Rev. E), each amplifier can operate from ±5 V supplies with maximum supply current of 5.0 mA and maximum power consumption of 50 mW per amplifier.
What is the operating voltage of AD8002ARZ?
The AD8002ARZ is designed to operate from ±5 V supplies. The Analog Devices AD8002 Data Sheet (Rev. E) identifies it as a dual low-power, high-speed amplifier for positive and negative 5 V operation. This supply arrangement supports professional video and instrumentation systems, but the complete datasheet should be consulted for absolute maximum ratings, common-mode limits, and output-current constraints.
What is the bandwidth of AD8002ARZ?
The AD8002ARZ provides 600 MHz -3 dB bandwidth at a gain of +1 and 500 MHz at a gain of +2. According to the Analog Devices AD8002 Data Sheet (Rev. E), this bandwidth is accompanied by a 1200 V/us slew rate. Practical usable bandwidth also depends on the selected feedback resistor, source and load impedances, PCB parasitics, and the gain configuration.
Is AD8002ARZ suitable for video amplifier applications?
AD8002ARZ is suitable for video amplification because it provides 600 MHz bandwidth at gain +1, 0.1 dB gain flatness through 60 MHz, 0.01% differential gain error, and 0.02-degree differential phase error. The Analog Devices AD8002 Data Sheet (Rev. E) cites excellent video performance with a 150-ohm load, making the device appropriate for wideband video buffers and active video distribution.
AD8002ARZ vs AD8002AR - which is better for a new design?
AD8002ARZ is the preferred ordering code for a new design when its Pb-free designation and 8-SOIC configuration match the required production specification. AD8002AR is a closely related same-family ordering code documented in the cross-reference results, but its suffix-specific temperature, packaging, and ordering conditions should be checked in the manufacturer documentation. Both are described as dual 600 MHz, 50 mW current-feedback amplifiers.
When should I choose AD8002ARZ over AD8002ARZ-R7?
Choose AD8002ARZ when the standard production ordering code and its documented lead-free suffix are required, and choose AD8002ARZ-R7 only when its specific reel or order-code conditions are needed. The available cross-reference information identifies both as 8-SOIC AD8002 family devices with the same 600 MHz, dual-channel current-feedback amplifier description. Verify the orderable-parts table before assigning either suffix to a released BOM.
Is AD8002ARZ suitable for high-speed ADC input conditioning?
AD8002ARZ can be suitable for high-speed ADC input conditioning when the complete ADC input network is designed around its current-feedback architecture. Its 600 MHz bandwidth at gain +1 and 16 ns settling to 0.1% provide substantial bandwidth relative to many converters. According to the Analog Devices AD8002 Data Sheet (Rev. E), low differential gain and phase errors help preserve amplitude and timing relationships in high-speed analog signal paths.
What can replace AD8002ARZ?
AD8002AR, AD8002ARZ-R7, and AD8002ARZ-RL are same-family ordering options associated with the AD8002ARZ cross-reference information, but they are order-code or reel variants rather than independent replacements. A true drop-in replacement must preserve the 8-SOIC pinout, ±5 V supply arrangement, bandwidth, power, and feedback-network requirements. Confirm the exact suffix, temperature grade, and package documentation before substitution.
What is the best cross-brand equivalent for AD8002ARZ?
No cross-brand drop-in equivalent is established here because a valid substitute must match the 8-SOIC pinout, ±5 V supply operation, 600 MHz bandwidth class, 1200 V/us slew-rate class, and current-feedback feedback requirements. The available cross-reference material does not identify a cross-brand candidate with verified pin and parameter equivalence. Engineers should validate any proposed substitute against the Analog Devices AD8002 Data Sheet (Rev. E) before redesign approval.
Where do I download the AD8002ARZ datasheet PDF?
The AD8002ARZ datasheet PDF is available from the official Analog Devices AD8002 document at analog.com. The document identifies the device as a dual 600 MHz, 50 mW current-feedback amplifier and provides the electrical characteristics, applications, and ordering information. Use the PDF together with the manufacturer's AD8002 product page when checking lifecycle status and the exact AD8002ARZ orderable part.
Where can I find the AD8002ARZ pinout?
The AD8002ARZ pinout and pin descriptions are located in the pin-configuration section of the Analog Devices AD8002 Data Sheet (Rev. E). The device uses an 8-SOIC package. Use the PDF pin diagram to assign supply, ground, input, output, feedback, and compensation connections exactly, because current-feedback layouts are sensitive to feedback-component placement and parasitic capacitance.

엔지니어링 참조 데이터: AD8002ARZ — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose AD8002ARZ when the design requires a dual, 600 MHz current-feedback amplifier operating from ±5 V rails and the standard Z ordering code matches the released BOM. Its 500 MHz bandwidth at gain +2, 1200 V/us slew rate, 16 ns settling to 0.1%, and low differential gain and phase errors suit wideband video, ADC interface, instrumentation, and active-filter circuits. AD8002AR is a closely related same-family choice when its suffix-specific ordering and environmental requirements match the production plan. AD8002ARZ-R7 and AD8002ARZ-RL preserve the same 8-SOIC footprint and headline performance but should be selected only when their reel ordering codes satisfy procurement requirements. No cross-brand substitute should be approved without verifying the pinout, feedback network, supply range, bandwidth, slew rate, settling behavior, and load stability against the AD8002 manufacturer documentation.

대체품과의 비교

파라미터 이 제품 AD8002AR AD8002ARZ-R7 AD8002ARZ-RL
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Amplifier Channels 2 circuits 2 circuits 2 circuits 2 circuits
Topology Current-feedback amplifier Current-feedback amplifier Current-feedback amplifier Current-feedback amplifier
Bandwidth at Gain +1 600 MHz 600 MHz 600 MHz 600 MHz
Bandwidth at Gain +2 500 MHz 500 MHz 500 MHz 500 MHz

주요 차별점

  • High bandwidth for a dual low-power amplifier (vs AD8002AR)
  • Exact same-family pin and package compatibility (vs AD8002ARZ-R7)
  • No performance penalty from the reel ordering code (vs AD8002ARZ-RL)

설계 노트

Keep the feedback resistor, feedback trace, input connection, and output route physically short because parasitic inductance and capacitance can alter the bandwidth and stability of a 600 MHz current-feedback amplifier. Route the feedback loop away from high-current and digital signals, use a continuous ground reference, and avoid sharing long return paths with switching circuitry. The 16 ns settling specification is meaningful only when the physical feedback network and source/load impedances match the test conditions used by Analog Devices.

Place low-inductance bypass capacitors directly across each device supply pin and connect them to the quiet ground reference without long loops. The AD8002 operates from ±5 V supplies, so both positive and negative rails require local decoupling. Account for the datasheet limit of 5.0 mA supply current per amplifier when sizing the rail regulators and return paths. Decoupling capacitors should have suitable self-resonance and effective high-frequency characteristics rather than relying solely on nominal capacitance.

Do not copy feedback values from a voltage-feedback amplifier into the AD8002 circuit without recalculation. The current-feedback topology makes bandwidth and stability dependent on the feedback impedance and source impedance. Also avoid adding capacitance to the input or output unless its effect on stability and bandwidth has been checked. Use the manufacturer's recommended resistor values and gain configurations, then validate the final board across the required temperature and supply ranges.

For video and converter interfaces, preserve controlled impedance and minimize discontinuities between the source, amplifier, and load. Terminate transmission lines according to the system architecture, keep connectors away from sensitive amplifier pins, and verify clock or data synchronization independently from analog bandwidth. The low specified gain and phase errors are valuable, but system-level distortion can still be dominated by reflections, unequal propagation paths, or poorly controlled source impedances.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The manufacturer identifies the AD8002 family as being in production. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated in the cited manufacturer snippets and remain unknown.

관련 검색

AD8002ARZ datasheet AD8002ARZ datasheet pdf AD8002ARZ pinout AD8002ARZ 8-SOIC pinout AD8002ARZ 600MHz amplifier AD8002ARZ 1200V/us slew rate AD8002ARZ current feedback amplifier AD8002ARZ video amplifier AD8002ARZ ADC interface AD8002ARZ equivalent AD8002ARZ replacement AD8002ARZ vs AD8002AR Analog Devices AD8002ARZ AD8002ARZ price

관련 부품 & 용어

Analog Devices AD8002 AD8002ARZ AD8002AR AD8002ARZ-R7 AD8002ARZ-RL current-feedback amplifier CFA dual operational amplifier high-speed amplifier video amplifier signal-conditioning amplifier power management analog semiconductor 600 MHz bandwidth 500 MHz bandwidth 1200 V/us slew rate 16 ns settling time differential gain error differential phase error current-feedback network 8-SOIC package SOIC family surface-mount package SMD analog-to-digital converter interface
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기