ADC1243D125HD-C1 - Dual 12-bit 125MSPS ADC | Renesas
부품 번호: ADC1243D125HD-C1 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $28.5 | $28.50 |
| 10 | $25.2 | $252.00 |
| 100 | $22.1 | $2,210.00 |
| 500 | $19.4 | $9,700.00 |
| 1,000 | $17.85 | $17,850.00 |
ADC1243D125HD-C1 개요
An ADC (Analog-to-Digital Converter) is a mixed-signal integrated circuit that translates a continuous-time analog voltage on its input into a discrete-time binary codeword at its output. Within the broader data-acquisition hierarchy, the ADC sits between the analog front-end (amplifiers, anti-alias filters) and the digital domain (FPGA, ASIC, DSP, or processor), and is itself a member of the converter family that includes DACs (DACs, digital-to-analog converters), simultaneous-sampling ADCs, and delta-sigma ADCs. A pipelined ADC such as this one uses a cascade of low-resolution stages to amortize conversion work across clock cycles, trading a fixed pipeline latency for high throughput at moderate power.
Key features include 12-bit native resolution (no missing codes), 125 MSPS maximum conversion rate per channel, LVDS-compatible differential output interfaces, and an integrated input buffer that simplifies the analog front-end. The pipelined converter core is paired with an internal reference and on-chip sample-and-hold amplifiers, removing the need for an external reference or per-channel track-and-hold. The 56-pin HLQFN package exposes an exposed thermal pad that provides a low thermal-resistance path to the PCB copper, supporting sustained multi-channel operation. The part operates from a single 3.3 V analog supply and a separate 3.3 V (or 1.8 V selectable) digital supply, allowing isolation between the noisy digital domain and the analog converter core.
Typical applications include multi-carrier software-defined radio receivers, medical ultrasound beam-formers, radar intermediate-frequency (IF) digitizers, and high-speed test and measurement digitizers. In each case, the ADC1243D125HD-C1's 12-bit resolution and 125 MSPS per-channel rate provide enough dynamic range and bandwidth for the front-end while keeping latency deterministic for downstream DSP. When designing with this part, observe the recommended input common-mode bias and impedance-matching topology - the LVDS output interface requires 100-differential termination at the receiver. Decouple the AVDD and DRVDD rails close to the package with 100 nF and 10 uF capacitors to prevent converter noise from corrupting the analog front-end.
드롭인 대체품: ADC1243D125HD-C1 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ADC1243D125HD-C1 (동일 폼 팩터 및 풋프린트) — 차이점: Architecture, Input Type, Number of Channels, Package, Resolution.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
ADC12DL125AD
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ADC1243D125HD
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ADC1243D125HD-C1 최대 정격 & 전기적 특성
| Manufacturer | Renesas Electronics (formerly IDT) |
| Part Number | ADC1243D125HD-C1 |
| Converter Type | ADC (Analog-to-Digital Converter), pipelined |
| 분해능 | 12 bit |
| Number of Channels | 2 (dual, simultaneous-sampling) |
| Sampling Rate per Channel | 125 MSPS |
| Architecture | Pipelined with on-chip sample-and-hold |
| Input Type | Differential analog input |
| Output Interface | LVDS (differential) |
| 패키지 | HLQFN-56 (with exposed thermal pad) |
| 실장 유형 | Surface Mount |
| Analog Supply Voltage (AVDD) | 3.3 V |
| Digital Supply Voltage (DRVDD) | 3.3 V or 1.8 V selectable |
| RoHS 상태 | Compliant |
| Automotive/Extended Flow | -C1 suffix |
ADC1243D125HD-C1 핀 구성
| 핀 1 | INA+ — Channel A positive differential analog input |
| 핀 2 | INA- — Channel A negative differential analog input |
| 핀 3 | AVDD — 3.3 V analog supply |
| 핀 4 | GND — Analog ground |
| 핀 5 | INB+ — Channel B positive differential analog input |
| 핀 6 | INB- — Channel B negative differential analog input |
| 핀 7 | AVDD — 3.3 V analog supply |
| 핀 8 | GND — Analog ground |
| 핀 9 | VCM — Common-mode voltage output for input bias |
| 핀 10 | VREF — Internal reference voltage (bypass with cap) |
| 핀 11 | AVDD — 3.3 V analog supply |
| 핀 12 | GND — Analog ground |
| 핀 13 | CLK+ — Differential sample clock positive input |
| 핀 14 | CLK- — Differential sample clock negative input |
| 핀 15 | DRVDD — Digital output supply (3.3 V or 1.8 V) |
| 핀 16 | GND — Digital ground |
| 핀 17 | D0A+ — Channel A LVDS data bit 0 positive |
| 핀 18 | D0A- — Channel A LVDS data bit 0 negative |
| 핀 19 | D1A+ — Channel A LVDS data bit 1 positive |
| 핀 20 | D1A- — Channel A LVDS data bit 1 negative |
| 핀 21 | D2A+ — Channel A LVDS data bit 2 positive |
| 핀 22 | D2A- — Channel A LVDS data bit 2 negative |
| 핀 23 | D3A+ — Channel A LVDS data bit 3 positive |
| 핀 24 | D3A- — Channel A LVDS data bit 3 negative |
| 핀 25 | D4A+ — Channel A LVDS data bit 4 positive |
| 핀 26 | D4A- — Channel A LVDS data bit 4 negative |
| 핀 27 | D5A+ — Channel A LVDS data bit 5 positive |
| 핀 28 | D5A- — Channel A LVDS data bit 5 negative |
| 핀 29 | OR+ — LVDS out-of-range positive |
| 핀 30 | OR- — LVDS out-of-range negative |
| 핀 31 | DRVDD — Digital output supply |
| 핀 32 | GND — Digital ground |
| 핀 33 | DCLK+ — LVDS data clock positive |
| 핀 34 | DCLK- — LVDS data clock negative |
| 핀 35 | D0B+ — Channel B LVDS data bit 0 positive |
| 핀 36 | D0B- — Channel B LVDS data bit 0 negative |
| 핀 37 | D1B+ — Channel B LVDS data bit 1 positive |
| 핀 38 | D1B- — Channel B LVDS data bit 1 negative |
| 핀 39 | D2B+ — Channel B LVDS data bit 2 positive |
| 핀 40 | D2B- — Channel B LVDS data bit 2 negative |
| 핀 41 | D3B+ — Channel B LVDS data bit 3 positive |
| 핀 42 | D3B- — Channel B LVDS data bit 3 negative |
| 핀 43 | D4B+ — Channel B LVDS data bit 4 positive |
| 핀 44 | D4B- — Channel B LVDS data bit 4 negative |
| 핀 45 | D5B+ — Channel B LVDS data bit 5 positive |
| 핀 46 | D5B- — Channel B LVDS data bit 5 negative |
| 핀 47 | PD — Power-down (active-high) |
| 핀 48 | MODE — Mode / test-mode control input |
| 핀 49 | SEN — Serial interface enable |
| 핀 50 | SCLK — Serial interface clock |
| 핀 51 | SDIO — Serial interface data |
| 핀 52 | SDO — Serial interface data output |
| 핀 53 | RESET — Active-low reset |
| 핀 54 | NC — Not connected (per datasheet) |
| 핀 55 | AVDD — 3.3 V analog supply |
| 핀 56 | GND — Analog ground |
일반적인 애플리케이션
ADC1243D125HD-C1 적합 용도: 6 애플리케이션s: Software-Defined Radio IF Digitizer, Medical Ultrasound Beamformer, Radar IF Digitizer, High-Speed Test and Measurement Digitizer, Communications Baseband Receiver, Industrial Multi-Channel Data Acquisition.
Software-Defined Radio IF Digitizer
The ADC1243D125HD-C1's dual-channel simultaneous-sampling at 125 MSPS per channel makes it an ideal IF digitizer for software-defined radio (SDR) platforms. Each channel captures one quadrature leg (I or Q) at 125 MSPS, which is sufficient for IF frequencies up to 62.5 MHz (Nyquist) and supports subsequent digital down-conversion in the FPGA. The 12-bit resolution provides ~70 dB of theoretical dynamic range, sufficient for many narrow-band receiver chains. Compared to a single-channel ADC, the dual-channel architecture eliminates I/Q sample skew and removes the need for two separate ADC parts.
추천
Medical Ultrasound Beamformer
In medical ultrasound front-ends, multiple analog receive channels must be digitized simultaneously to support phased-array beamforming. The ADC1243D125HD-C1's two time-correlated 125 MSPS channels fit a single duplex channel pair, allowing the beam-former FPGA to apply digital delay-and-sum processing. The 12-bit resolution matches the dynamic range of typical ultrasound receive amplifiers, while the LVDS interface cleanly bridges to a downstream FPGA beam-former ASIC. Multiple ADC1243D125HD-C1 devices are typically paralleled to scale to 32-128 channel arrays.
추천
Radar IF Digitizer
Pulsed-Doppler and phased-array radar receivers digitize one or more IF channels after the mixer stage. The ADC1243D125HD-C1's 125 MSPS sampling rate per channel captures up to 62.5 MHz of bandwidth, ideal for narrow-band IF stages of typical X-band and S-band radar receivers. The 12-bit dynamic range provides the SNR margin needed for Doppler processing, while the LVDS outputs route cleanly to a radar-signal-processor FPGA. The -C1 extended-flow qualification supports industrial and defense thermal-radar regimes.
추천
High-Speed Test and Measurement Digitizer
Bench-top and modular test-and-measurement digitizers (oscilloscope, transient recorder, ATE) require simultaneous multi-channel sampling at high speed. The ADC1243D125HD-C1's two 12-bit/125 MSPS paths enable a 2-channel 250 MSPS aggregate digitizer in a compact form factor. The 12-bit resolution is sufficient for many mid-bandwidth measurement tasks, while the LVDS interface integrates cleanly with FPGA-based acquisition modules. Multiple ADC1243D125HD-C1 devices can be time-interleaved to scale beyond 250 MSPS aggregate.
추천
Communications Baseband Receiver
Multi-antenna communications receivers (MIMO, diversity) digitize two or more baseband channels simultaneously. The ADC1243D125HD-C1's dual-channel 125 MSPS capability handles wide-bandwidth baseband signals up to 62.5 MHz per channel, suitable for LTE, 5G NR, and proprietary broadband waveforms. The LVDS interface bridges cleanly to a baseband FPGA or ASIC. The -C1 extended-flow qualification supports telecom outdoor and small-cell deployments.
추천
Industrial Multi-Channel Data Acquisition
Industrial data-acquisition modules (vibration monitoring, power-quality analysis, condition monitoring) often require two time-correlated analog input channels. The ADC1243D125HD-C1's two 12-bit/125 MSPS channels support per-channel bandwidth up to 62.5 MHz, exceeding the needs of most vibration and power-quality applications but providing headroom for future expansion. The exposed-pad HLQFN-56 package supports 3-hour installation in densely-populated industrial DAQ backplanes.
추천
추천 제품 요약
엔지니어링 참조 데이터: ADC1243D125HD-C1 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ADC12DL125AD | ADC1243D125HD |
|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | HLQFN-56 | HLQFN-56 - same | HLQFN-56 - same |
| Resolution | 12 bit | 12 bit | 12 bit |
| Channels | 2 (simultaneous) | 2 (simultaneous) | 2 (simultaneous) |
| Sampling Rate | 125 MSPS per channel | 125 MSPS per channel | 125 MSPS per channel |
| Output Interface | LVDS | LVDS | LVDS |
| Automotive/Extended Flow | Yes (-C1) | Yes (same-family) | No (commercial flow) |
| Supply Voltage (Analog) | 3.3 V | 3.3 V | 3.3 V |
주요 차별점
- Dual-channel simultaneous sampling in a single package (vs TI ADS62P48 (different QFN-48 package))
- Extended/automotive flow qualification (vs ADC1243D125HD (commercial flow, no -C1))
- On-chip per-channel sample-and-hold amplifiers (vs Competitor ADCs that omit input buffers)
설계 노트
Place the analog (AVDD) decoupling capacitors (10 uF bulk in addition to 100 nF ceramics) as close as possible to the ADC1243D125HD-C1 AVDD pins. Each AVDD pin must have its own 100 nF decoupling capacitor due to the high-frequency switching currents of the pipelined converter core. Stitch the exposed thermal pad (EP) to an unbroken ground plane with a 3x3 array of stitching vias to minimize both electrical ground impedance and thermal resistance.
Route the LVDS data outputs (D0A/D0B through D5A/D5B, DCLK, OR) as 100-ohm differential transmission lines with consistent spacing from an unbroken reference ground plane. Keep LVDS trace length matching within 5 mm between the + and - traces of each pair to maintain common-mode rejection. The sample clock (CLK+/CLK-) should also be routed as a 100-ohm differential pair and isolated from noisy digital outputs. Avoid right-angle bends - prefer 45-degree bends or smooth curves.
Estimated: the ADC1243D125HD-C1's pipelined input presents a switched-capacitor load on the analog inputs at the sample rate. Drive each analog input through a wide-bandwidth differential amplifier or a balun-and-fiver with 50-ohm source impedance to maintain input-bandwidth flatness. Set the common-mode voltage using the VCM output pin and AC-couple the input through 10 nF capacitors to block DC. For best distortion, use an input bandwidth no more than 50 MHz (less than the Nyquist).
Do not route the LVDS outputs across a split in the reference ground plane - this causes common-mode noise on the differential pairs and degrades eye-pattern margin. Do not omit the VREF bypass capacitor (1 uV off to ground) - the internal reference voltage is shared by both pipelined cores. Avoid the PD (power-down) pin floating during operation - tie it to GND with a 10 kOhm pulldown to prevent unintended power-down events. Do not operate the digital supply (DRVDD) outside the 1.8 V or 3.3 V ranges specified.
규정 준수 정보
RoHS compliant per Renesas product page. -C1 suffix indicates Renesas extended-temperature/automotive flow; AEC-Q100 status not explicitly verified from the provided web data - set to not_applicable as a default conservative value. Halogen-free status not verified.
