ADF4350BCPZ-RL7 - 4.4 GHz Fractional-N PLL | Analog Devices
부품 번호: ADF4350BCPZ-RL7 ✓ 활성ADF4350BCPZ-RL7 개요
A phase-locked loop is a feedback-controlled oscillator used to generate a stable output frequency from a reference signal. In the broader device hierarchy, the ADF4350BCPZ-RL7 is a clock-and-timing IC, specifically a PLL frequency synthesizer with an integrated VCO. Fractional-N operation divides the reference frequency by an integer value plus a programmable fraction, supporting fine frequency increments without requiring a high reference frequency. Integer-N mode provides a conventional integer divider path.
The principal features of this synthesizer include support for both fractional-N and integer-N architectures, an integrated VCO, an external reference input, and programmable frequency synthesis through a serial interface. The 4.4 GHz upper operating frequency makes the device suitable for radio-frequency front ends, test equipment, instrumentation, and communication modules whose local oscillator or clock source must be adjustable over a wide frequency range. The exposed thermal pad supports heat transfer from the IC to the PCB copper area.
The ADF4350BCPZ-RL7 uses a phase detector, programmable divider chain, charge-pump output, and integrated VCO to close the PLL loop. An external passive loop filter connects the charge pump to the VCO control input and determines major loop dynamics. Designers therefore need to select filter components for the intended reference frequency, division ratios, phase-noise requirement, and settling time rather than treating the loop filter as a fixed accessory.
Typical applications include wireless transceiver local oscillators, RF test and measurement instruments, frequency-generating test equipment, industrial RF control modules, and communication infrastructure. The device is especially appropriate when one synthesizer platform must cover several output frequencies and the system can configure the frequency through its digital control interface. It can also support integer-N use cases where fractional channel spacing is unnecessary.
PCB implementation requires careful treatment of the RF output, reference input, ground return paths, supply decoupling, and exposed-pad thermal design. Place the loop-filter components close to the charge-pump and VCO-control pins, connect the exposed pad to a properly sized ground plane, and follow the manufacturer's package and evaluation-board layout recommendations to preserve RF performance and phase-noise behavior.
This page combines the product identity, package information, purchasing guidance, application analysis, and drop-in-family comparisons in a form designed for rapid engineering review. It also identifies when an ADF4350BCPZ-family device can simplify a design without requiring a different board footprint.
드롭인 대체품: ADF4350BCPZ-RL7 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ADF4350BCPZ-RL7 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Device Type, Operating Temperature Range, Architecture, Loop Filter.
ADF4350BCPZ-RL
✅ 드롭인가격 문의
데이터시트 보기 →ADF4350BCPZ
✅ 드롭인가격 문의
데이터시트 보기 →ADF4350ABCPZ
✅ 드롭인가격 문의
데이터시트 보기 →ADF4350BCPZ-RL7 사양
| Product Type | Fractional-N and Integer-N PLL frequency synthesizer with integrated VCO |
| Maximum Synthesized Frequency | 4.4 GHz |
| PLL Modes | Fractional-N and Integer-N |
| VCO Integration | Integrated |
| Reference Input | External reference frequency |
| Loop Filter | External |
| 동작 온도 범위 | -40°C to +85°C |
| 패키지 | 32-WFQFN exposed pad, CSP |
| Lead Count | 32 leads |
| 실장 유형 | Surface mount |
ADF4350BCPZ-RL7 32-wfqfn exposed pad, csp 핀 구성 가이드
ADF4350BCPZ-RL7(32-wfqfn exposed pad, csp 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: ADF4350BCPZ-RL7.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ADF4350BCPZ-RL7 적합 용도: 6 애플리케이션s: RF Test Signal Source, Wireless Transceiver Local Oscillator, Frequency Calibration Instrument, Industrial RF Control Module, RF Communication Module, Laboratory Frequency Generator.
RF Test Signal Source
The ADF4350BCPZ-RL7 fits programmable RF test equipment because it synthesizes frequencies up to 4.4 GHz and supports both fractional-N and integer-N operating modes. A fixed external reference establishes accuracy, while an external loop filter closes the phase-locked loop and must be designed for the selected division ratios and settling requirements. This gives an instrument designer one adjustable local-oscillator source instead of several fixed-frequency oscillators. Final suitability depends on the phase-noise, spurious-signal, output-power, and settling-time limits of the test specification.
추천
Wireless Transceiver Local Oscillator
The ADF4350BCPZ-RL7 can generate a programmable local oscillator for RF transceiver chains requiring carrier tuning through 4.4 GHz. Fractional-N operation provides fine output-frequency increments from an external reference, while integer-N mode supports simpler divider ratios. The synthesizer is placed behind the RF output matching network and controlled through its serial interface. The external loop filter remains central to phase-noise and settling performance, so it must be calculated from the actual reference frequency, divider settings, and channel plan.
추천
Frequency Calibration Instrument
The ADF4350BCPZ-RL7 is appropriate for calibration systems that require a tunable reference or local oscillator rather than a fixed crystal source. Its 4.4 GHz upper synthesized frequency supports RF calibration points across wide bands, and fractional-N division permits closely spaced test frequencies. In this arrangement, the external reference determines absolute stability, while the PLL loop filter shapes spectral performance and acquisition time. Use the manufacturer evaluation-board layout as a starting point for controlled impedance routing and exposed-pad thermal construction.
추천
Industrial RF Control Module
Industrial RF modules can use the ADF4350BCPZ-RL7 to create an adjustable carrier for sensing, telemetry, or communication subcircuits. The integrated VCO reduces the number of external frequency-generation components, and the -40°C to +85°C operating range supports many industrial environments. The design still requires a stable external reference, a calculated loop filter, suitable RF output matching, and a PCB that effectively couples the WFQFN exposed pad to ground. Firmware can select fractional-N or integer-N configurations to balance resolution and loop behavior.
추천
RF Communication Module
The ADF4350BCPZ-RL7 is suited to communication modules that need a digitally controlled oscillator with output frequencies up to 4.4 GHz. Fractional-N synthesis allows multiple closely spaced channels without requiring a reference frequency equal to every desired output, while integer-N operation can simplify selected channel plans. The synthesizer's output is conditioned by the PCB reference network and loop filter before entering the RF chain. Designers should evaluate lock range, reference feedthrough, phase noise, and spurs under the final divider and filter configurations.
추천
Laboratory Frequency Generator
The ADF4350BCPZ-RL7 can serve as the tunable RF core of a laboratory frequency generator covering frequencies through 4.4 GHz. Its programmable fractional-N and integer-N modes allow one synthesizer platform to support multiple output plans. A high-quality external reference contributes frequency accuracy, while the external loop filter and careful RF layout determine phase noise and spurious performance. The exposed-pad package also requires an uninterrupted thermal path and low-impedance ground connection. Final calibration and output-level control should be validated with the complete reference and filtering chain.
추천
추천 제품 요약
엔지니어링 참조 데이터: ADF4350BCPZ-RL7 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ADF4350BCPZ-RL | ADF4350BCPZ | ADF4350ABCPZ |
|---|---|---|---|---|
| Package | 32-WFQFN exposed pad, CSP | 32-WFQFN exposed pad, CSP | 32-WFQFN exposed pad, CSP | 32-WFQFN exposed pad, CSP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Maximum Synthesized Frequency | 4.4 GHz | 4.4 GHz | 4.4 GHz | 4.4 GHz |
| PLL Modes | Fractional-N and Integer-N | Fractional-N and Integer-N | Fractional-N and Integer-N | Fractional-N and Integer-N |
| VCO Integration | Integrated | Integrated | Integrated | Integrated |
| Reference Input | External | External | External | External |
| Loop Filter | External | External | External | External |
주요 차별점
- Supports fractional-N and integer-N operation in one device (vs ADF4350BCPZ-RL)
- Uses an integrated VCO with an external loop filter (vs ADF4350BCPZ)
- Pin-compatible family footprint supports targeted redesigns (vs ADF4350ABCPZ)
설계 노트
Use the Analog Devices EVAL-ADF4350 layout as the reference for component placement and routing. Keep the external loop-filter network close to the charge-pump and VCO-control pins, minimize loop area, and preserve a continuous ground reference beneath the device. The 32-lead WFQFN exposed pad should connect to the ground plane through a dense via array and short thermal path to support reliable operation across the -40°C to +85°C range.
Separate the external reference path from the RF output and sensitive loop-filter nodes, and use controlled-impedance routing where the board stackup permits. Provide local supply and ground decoupling at the device pins with very short return paths. Avoid routing high-current or switching-supply traces beneath the VCO and reference sections, because coupling into these paths can degrade phase noise and increase reference feedthrough.
Do not select a replacement by footprint alone. The ADF4350BCPZ-RL, ADF4350BCPZ, and ADF4350ABCPZ order codes share the family package, but the suffix can affect temperature grade, packaging, qualification, or lifecycle configuration. Check the manufacturer ordering guide, confirm the complete MPN, and verify the external loop-filter design because changing reference or divider values can materially alter lock behavior and spectral performance.
Treat the external reference and loop filter as part of the complete synthesizer signal chain. Reference noise, supply ripple, ground impedance, and charge-pump ripple all influence phase noise and lock behavior. Validate the design with the intended reference source and divider ratios, and compare measured lock range and settling time against the application requirement before releasing the PCB layout.
규정 준수 정보
Compliance status is not stated in the confirmed product-page and listing information. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals documentation for the exact order code with the manufacturer before qualification.