ATF16V8CZ-15PI - 8-Macrocell 15 ns EE PLD | Microchip
부품 번호: ATF16V8CZ-15PI ✓ 활성ATF16V8CZ-15PI 개요
An EEPLD is a programmable logic device that stores its logic configuration in electrically erasable memory. It belongs to the programmable-logic hierarchy alongside PAL devices, CPLDs, and FPGAs. Unlike a fixed gate-level implementation, an ATF16V8CZ-15PI can be programmed for combinational or registered logic, allowing product revisions to be handled without changing the PCB layout.
The device provides up to 16 inputs, eight I/Os, and eight macrocells in a 250-gate-class logic design. Its stated 15 ns propagation delay supports moderate-speed control, interface, and decoding functions. The ATF16V8CZ also features zero-power operation, 25 uA standby power, and CMOS and TTL-compatible inputs and outputs for integration with conventional digital logic families.
Programming uses electrically erasable flash technology, allowing a configured device to be reprogrammed during development, production test, or field updates. The 20-pin PDIP format supports conventional through-hole assembly and prototyping, while the 250-gate logic capacity provides more flexibility than a small fixed PAL. Applications are still bounded by the eight macrocell and eight-I/O architecture, so designs requiring extensive parallelism should move to a larger CPLD or FPGA.
Typical uses include industrial control logic, legacy interface decoding, printer and peripheral controllers, data acquisition, instrumentation, and embedded system glue logic. The device is particularly useful when a design needs configurable Boolean functions, registered outputs, or a compact replacement for several small PAL devices without requiring a complex FPGA development flow.
Designers should preserve the ATF16V8CZ-15PI pin assignments when programming the device and use the manufacturer datasheet pin-description table to assign inputs, outputs, clock, and control functions. Confirm the 5 V supply tolerance, unused input states, and output drive requirements for every connected net. The through-hole package also requires adequate board spacing and lead-bend clearance during insertion and soldering.
This product data combines the device architecture, package information, search-focused technical questions, and drop-in comparison guidance into an engineering-focused reference for designers evaluating a compact, reprogrammable logic solution.
드롭인 대체품: ATF16V8CZ-15PI — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ATF16V8CZ-15PI (동일 폼 팩터 및 풋프린트) — 차이점: Device Type, Package, I/O Count, Maximum Inputs, Architecture.
ATF16V8CZ-15PU
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ATF16V8B-15PC
✅ 드롭인가격 문의
데이터시트 보기 →ATF16V8CZ-15PI 최대 정격 & 전기적 특성
| Device Type | EEPLD |
| Programmable Logic Type | Electrically erasable programmable logic device |
| Series | 16V8 |
| Macrocell Count | 8 macrocells |
| Logic Gate Class | 250 gates |
| Maximum Inputs | 16 inputs |
| I/O Count | 8 I/Os |
| Propagation Delay | 15 ns |
| Maximum Pin-to-Pin Delay | 12 ns |
| 공급 전압 | 5 V |
| Standby Power | 25 uA |
| Input Compatibility | CMOS and TTL compatible |
| Output Compatibility | CMOS and TTL compatible |
| 패키지 | 20-PDIP |
| 실장 유형 | Through-hole |
| RoHS 상태 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
ATF16V8CZ-15PI 20-pdip 핀 구성 가이드
ATF16V8CZ-15PI(20-pdip 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: ATF16V8CZ-15PI.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ATF16V8CZ-15PI 적합 용도: 6 애플리케이션s: Industrial Control Logic, Legacy Interface Decoding, Printer and Peripheral Controllers, Data Acquisition Front Ends, Instrumentation Signal Routing, Embedded System Glue Logic.
Industrial Control Logic
The ATF16V8CZ-15PI fits compact industrial control boards that require configurable Boolean decoding, state-transition logic, and interlock functions without the resource use of an FPGA. Its eight macrocells and up to 16 inputs can consolidate several small PAL functions, while eight I/Os support control outputs and interface signals. The 15 ns propagation delay is appropriate for moderate-speed control paths. The 20-PDIP format also simplifies prototype rework and through-hole maintenance. Confirm electrical limits and temperature-grade requirements against the manufacturer documentation before deploying the device in a safety-critical control function.
추천
Legacy Interface Decoding
ATF16V8CZ-15PI is useful for decoding legacy bus signals, qualifying command sequences, or translating between mixed logic conventions. Its eight I/O paths provide dedicated bidirectional or unidirectional interface resources, and the 16-input limit supports address, chip-select, and control inputs. Electrically erasable flash technology allows interface corrections to be programmed without changing the PCB. The stated CMOS and TTL compatibility simplifies connections to older controller families. Designers should verify whether each connected signal requires a pull-up, pull-down, registered output, or specific tristate behavior in the programmed fuse configuration.
추천
Printer and Peripheral Controllers
The ATF16V8CZ-15PI can implement the fixed control and decoding functions associated with legacy printers, scanners, and peripheral adapters. Eight macrocells are sufficient for multiple command decoders, timing qualifiers, and output registers within a compact logic budget. The 5 V supply and CMOS/TTL-compatible interfaces align with many established peripheral circuits, while the 20-pin PDIP package supports through-hole boards. The device is most appropriate where logic must remain reprogrammable during product revisions but the application does not justify the cost and complexity of a modern FPGA.
추천
Data Acquisition Front Ends
ATF16V8CZ-15PI can handle signal conditioning, range selection, channel sequencing, and control decoding around slower data-acquisition systems. Its up to 16 inputs allow status, timing, and range-selection signals to be combined, while the eight I/Os can operate sensors, latches, or multiplex-control lines. The 15 ns propagation delay is well suited to control functions that are not on the critical path of high-rate conversion. The electrically erasable configuration permits calibration tables or revised control sequences to be updated while retaining the same PCB and connector arrangement.
추천
Instrumentation Signal Routing
The ATF16V8CZ-15PI is appropriate for instrumentation front ends requiring programmable input routing, range decoding, and control-signal isolation between measurement and display sections. Its eight macrocells provide enough logic for several switch-control sequences and status functions, and the 15 ns delay supports deterministic control behavior. CMOS- and TTL-compatible interfaces help bridge different logic families found in older laboratory equipment. When used with sensitive analog circuitry, keep the digital routing and programming supply paths separate from high-impedance sensor lines to avoid unintended coupling.
추천
Embedded System Glue Logic
ATF16V8CZ-15PI can bridge asynchronous control signals between a microprocessor, memory, and peripheral devices using programmable decode and registered outputs. It is useful where fixed glue-logic ICs would create multiple part numbers or where a small amount of logic must be revised after system integration. The 20-pin PDIP package allows straightforward insertion and replacement, while eight macrocells can support multiple address, chip-select, and handshake functions. The design should include defined states for all unused inputs and should verify that the configured output timing meets the timing budget of the surrounding bus.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATF16V8CZ-15PI — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ATF16V8CZ-15PU | ATF16V8B-15PC |
|---|---|---|---|
| Package | 20-PDIP | 20-pin DIP | 20-PDIP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Device Family | ATF16V8CZ | ATF16V8CZ | ATF16V8B |
| Propagation Delay | 15 ns | 15 ns | 15 ns |
| Mounting Style | Through-hole | Through-hole | Through-hole |
주요 차별점
- Exact 20-pin DIP format in the same ATF16V8CZ family (vs ATF16V8CZ-15JU)
- Direct family-oriented substitution candidate (vs ATF16V8CZ-15PU)
- Compact reprogrammable logic resource (vs ATF16V8B-15PC)
설계 노트
Use the ATF16V8CZ-15PI pin-description table and package drawing to preserve every programmed signal assignment when laying out the 20-PDIP footprint. Do not infer pin functions solely from the eight-I/O rating because input and output multiplexing can change with the fuse map. Keep sensitive analog inputs away from programming and clock traces, provide a stable 5 V supply connection, and route unused inputs to defined levels according to the manufacturer datasheet.
The ATF16V8CZ family is specified for a 5 V supply and includes a stated 25 uA standby-power condition. Place the device's supply decoupling close to the package power pins and keep return paths short, using the capacitor values and placement guidance from the manufacturer datasheet and reference design. Verify the complete board's 5 V tolerance and switching noise rather than assuming the logic-level specification alone guarantees reliable operation in a larger power system.
Do not treat the ATF16V8CZ, ATF16V8B, PDIP, and PLCC variants as interchangeable solely because they share the 16V8 designation or speed suffix. ATF16V8CZ-15JU uses a 20-PLCC package, while ATF16V8B-15PC requires family-level pin and programming review. Confirm the fitted package, fuse-file target, supply limits, temperature range, and programmed configuration before approving a substitution.
규정 준수 정보
The ATF16V8CZ family product page was available, but no exact compliance declaration for the ATF16V8CZ-15PI orderable suffix was included in the cited product data.