ATMEGA324PA-AU - 32KB AVR MCU 20MHz TQFP-44 | Microchip
부품 번호: ATMEGA324PA-AU ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $4.62 | $4.62 |
| 10 | $4.16 | $41.60 |
| 100 | $3.63 | $363.00 |
| 500 | $3.21 | $1,605.00 |
| 1,000 | $2.87 | $2,870.00 |
ATMEGA324PA-AU 개요
An 8-bit AVR microcontroller is a single-chip processor that integrates a Harvard-architecture RISC CPU, program Flash, data SRAM, EEPROM, and peripherals on one die. It sits within the broader hierarchy: MCU -> embedded processor -> integrated circuit, and belongs to the ATmega family used throughout the embedded systems industry. Executing most of its 131 instructions in a single clock cycle, the AVR core achieves throughput approaching 1 MIPS per MHz, letting designers trade clock speed directly against power consumption.
Key features include the picoPower low-power technology suite, read-while-write Flash for in-system programming, three flexible timer/counters with compare modes and PWM, two USARTs, a byte-oriented 2-wire serial interface (TWI/I2C), and an 8-channel 10-bit ADC. The 5 V supply range (4.5 V to 5.5 V per the Atmel/Microchip datasheet listing) makes it robust in electrically noisy industrial environments.
Architecturally, the device pairs the AVR enhanced RISC core with 32 general-purpose working registers directly connected to the ALU, so a rich instruction set executes in one clock per instruction for most opcodes. In-system programmable Flash with read-while-write support allows firmware updates over SPI or UART bootloaders without removing the chip from the board.
Typical applications include industrial automation controllers, sensor nodes and instrumentation, LED lighting and motor-control boards, and hobbyist/embedded products that benefit from the huge ATmega ecosystem of Arduino-compatible tools, compilers, and programmers.
For design, keep clock speed as low as the application allows to exploit picoPower sleep modes, and use 100 nF decoupling on each supply pin. Confirm brown-out and supply tolerance at 5 V operation for reliability.
This page synthesizes verified distributor data, drop-in alternatives, design notes, and SEO-structured technical content not found on the manufacturer product page alone.
드롭인 대체품: ATMEGA324PA-AU — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ATMEGA324PA-AU (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC, Serial Interfaces, Timers, RoHS Status.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
ATMEGA324PB-AU
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ATMEGA324A-AU
✅ 드롭인✓ 재고 있음
$2.09 / 개
데이터시트 보기 →ATMEGA644PA-AU
✅ 드롭인✓ 재고 있음
$4.61 / 개
데이터시트 보기 →ATMEGA164PA-AU
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$2.75 / 개
데이터시트 보기 →ATMEGA1284P-AU
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$4.65 / 개
데이터시트 보기 →ATMEGA324PA-AU 최대 정격 & 전기적 특성
| Core Architecture | 8-bit AVR RISC |
| Flash Memory | 32 KB ISP Flash (16K x 16), read-while-write |
| SRAM | 2 KB |
| EEPROM | 1 KB |
| 최대 클록 주파수 | 20 MHz |
| 공급 전압 | 4.5 V to 5.5 V |
| I/O Lines | 32 |
| Working Registers | 32 general purpose |
| Instructions | 131 powerful instructions, most single-cycle |
| Timers/Counters | 3 with compare modes and PWM |
| Serial Interfaces | 2 USART, TWI (I2C), SPI |
| ADC | 8-channel 10-bit |
| Low-Power Technology | picoPower |
| 패키지 | 44-TQFP (10 x 10 mm, 0.8 mm pitch) |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant |
ATMEGA324PA-AU 44-tqfp (10 x 10 mm, 0.8 mm pitch) 핀 구성 가이드
ATMEGA324PA-AU(44-tqfp (10 x 10 mm, 0.8 mm pitch) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: ATMEGA324PA-AU.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ATMEGA324PA-AU 적합 용도: 6 애플리케이션s: Industrial Automation Controllers, Sensor Nodes and Instrumentation, LED Lighting and Dimming Control, Hobbyist and Educational Embedded Projects, Motor Control and PWM Drive Systems, Communication Gateways and Serial Bridges.
Industrial Automation Controllers
The ATMEGA324PA-AU suits industrial control nodes because its 4.5 V to 5.5 V supply range matches legacy 24 V-panel-derived 5 V rails with superior noise margin over 3.3 V MCUs. Three timers with compare modes and PWM drive actuators and motor drivers directly, while two hardware USARTs isolate operator panels from sensor networks. The 32 GPIO lines reduce external I/O expansion in relay and valve control boards, and the 10-bit ADC reads potentiometers and current shunts. Running at 16-20 MHz delivers roughly 16-20 MIPS from a single-cycle RISC core, sufficient for sequential control logic, while picoPower sleep modes cut standby draw in periodically woken nodes.
추천
Sensor Nodes and Instrumentation
For measurement front-ends, the ATMEGA324PA-AU's 8-channel 10-bit ADC digitizes multiple sensors such as thermistors, pressure bridges, and potentiometer dividers without an external converter. The TWI (I2C) master interface reads digital sensors like the AT30TS temperature family, while the SPI port services high-speed data converters or flash logging. PicoPower technology supports extended sleep duty cycles in battery-powered loggers, waking on USART or timer interrupts. With 2 KB SRAM and 1 KB EEPROM, the part stores calibration constants and buffering windows locally, and the read-while-write Flash allows field firmware updates over a UART bootloader without removing the MCU from the deployed instrument board.
추천
LED Lighting and Dimming Control
Lighting controllers benefit from the ATMEGA324PA-AU's three timers whose compare outputs generate hardware PWM channels, guaranteeing flicker-free dimming without CPU intervention even at 20 MHz operation. The 5 V supply tolerates the electrical noise that switching LED drivers inject into shared rails, and the 10-bit ADC monitors current and temperature feedback for closed-loop brightness regulation. With 32 I/O lines the MCU can drive several PWM channels plus addressable-LED serial timing via the SPI port, while USARTs accept DMX-style or RS-485 control signals in stage and architectural lighting. The 1 KB EEPROM persists scene presets and address settings across power cycles without external memory.
추천
Hobbyist and Educational Embedded Projects
The ATMEGA324PA-AU is popular in maker and education contexts because it uses the same AVR instruction set and toolchain as the classic Arduino family, running with AVR-GCC, Microchip Studio, or Arduino-compatible cores and standard ISP programmers. The 44-pin TQFP offers far more I/O (32 lines) and memory headroom (32 KB Flash, 2 KB SRAM) than the 28-pin ATmega328P, enabling robotics shields, retro-computing replicas, and multi-peripheral projects on one chip. DIP-adapter breakout boards simplify hand soldering, and two USARTs permit simultaneous USB-serial debugging and device communication. Its 20 MHz rating at 5 V gives full-speed operation from common bench supplies and breadboard-friendly voltage levels.
추천
Motor Control and PWM Drive Systems
DC and stepper motor control exploits the ATMEGA324PA-AU's hardware PWM channels generated by its three timer/counter blocks, offloading waveform generation from software and freeing the 20 MIPS RISC core for closed-loop control math. Encoder quadrature inputs feed interrupt-capable GPIO and the 10-bit ADC samples back-EMF or shunt current for speed regulation. The two USARTs integrate with higher-level field controllers over RS-485, and 5 V operation drives MOSFET gate logic directly without level shifters, simplifying half-bridge driver design. PicoPower idle modes keep the MCU responsive between control-loop interrupts, and 1 KB EEPROM stores tuning parameters such as PID constants across power-down.
추천
Communication Gateways and Serial Bridges
With two independent hardware USARTs, a byte-oriented TWI master/slave, and an SPI port, the ATMEGA324PA-AU natively bridges three serial domains on one chip - for example converting Modbus RTU on RS-485 to I2C-attached peripherals, or forwarding UART telemetry to an SPI flash logger. The read-while-write Flash permits storing received data blocks while firmware continues executing, and the 32 KB program space hosts protocol stacks with room to spare. Hardware buffer depth reduces interrupt latency at 20 MHz, supporting sustained multi-kbps links. The 5 V I/O directly drives legacy RS-232 transceivers and optocoupled industrial lines, making it a compact gateway fit for brownfield installations.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATMEGA324PA-AU — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ATMEGA324PB-AU | ATMEGA324A-AU | ATMEGA644PA-AU | ATMEGA164PA-AU | ATMEGA1284P-AU |
|---|---|---|---|---|---|---|
| Package | 44-TQFP (10x10 mm, 0.8 mm pitch) | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 32 KB | 32 KB | 32 KB | 64 KB | 16 KB | 128 KB |
| SRAM | 2 KB | 2 KB | 2 KB | 4 KB | 1 KB | 16 KB |
| EEPROM | 1 KB | 1 KB | 1 KB | 2 KB | 512 B | 4 KB |
| Max Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Low-Power Technology | picoPower | picoPower (improved) | No (standard) | picoPower | picoPower | picoPower |
| Extra Peripherals vs 324PA | Baseline (2 USART, 1 SPI, TWI) | Extra timers + second SPI | None (equivalent) | None (memory-only gain) | None (memory reduced) | None (memory-only gain) |
주요 차별점
- picoPower low-power technology (vs ATMEGA324A-AU)
- Lower active current plus second SPI port (vs ATMEGA324PB-AU)
- Right-sized memory at lowest typical cost (vs ATMEGA1284P-AU)
설계 노트
Run the ATMEGA324PA-AU from a clean 5 V rail (datasheet range 4.5 V to 5.5 V) with 100 nF ceramic decoupling on every VCC/AVCC pin pair placed within 5 mm of the pins. Enable the internal brown-out detector (BOD) at 4.3 V so Flash and EEPROM writes are not corrupted during supply sag. If AVCC powers the ADC, filter it through an LC or RC network (10 uH / 100 nF) to keep ADC noise below the 10-bit LSB floor, and tie AREF to a decoupled reference rather than the raw rail for precision measurements.
The 44-TQFP uses 0.8 mm pitch, which is comfortably hand-assemblable and routes 0.15 mm traces between pads on a two-layer PCB. Place the crystal within 10 mm of XTAL1/XTAL2 with short return traces to ground; load capacitors of 12-22 pF (per the crystal datasheet) stabilize the 20 MHz oscillator. Expose a ground plane under the package and stitch it with vias near each GND pin. Keep reset traces short and add a 10 k pull-up plus optional 100 nF to GND for robust in-circuit programming with SPI programmers.
Do not run the 20 MHz rating below 4.5 V - check the datasheet frequency-versus-voltage curve before undervolting for power savings, as overclocked low-voltage operation causes marginal timing. Programmers must match fuse settings: setting SPIEN off or locking lockbits without a bootloader can brick access until a parallel high-voltage programmer is used. Also verify RESET pin fuse choice (external pull-up required when RESET is disabled). Migrating to ATMEGA324PB-AU requires re-checking register addresses for the added timers, though core peripherals remain compatible.
규정 준수 정보
RoHS compliance per Xecor comparison data ('compliant with the ROHS directive'). Other compliance attributes not stated in provided data.
