ATSAMA5D28B-CN - Cortex-A5 500MHz MPU, 128MB DDR2 | Microchip
부품 번호: ATSAMA5D28B-CN ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $28.5 | $28.50 |
| 10 | $25.6 | $256.00 |
| 100 | $22.75 | $2,275.00 |
| 500 | $20.1 | $10,050.00 |
| 1,000 | $17.95 | $17,950.00 |
ATSAMA5D28B-CN 개요
Key features include the Arm Cortex-A5 core with Armv7-A architecture, Arm TrustZone security extensions, and a NEON media processing engine for SIMD acceleration. The device supports 32 Kbytes of L1 instruction cache and 32 Kbytes of L1 data cache, backed by 128 Kbytes of configurable L2 cache and a full memory management unit (MMU). A 128 Mbytes DDR2/DDR3L/LPDDR2/LPDDR3 memory controller is integrated on-chip, removing the need for external memory in many designs.
The ATSAMA5D28B-CN utilizes a single Cortex-A5 core implementation with floating-point unit (VFPv4) and ETM/ETB debug support for trace-based development. It integrates multiple peripheral interfaces including two high-speed USB controllers (one USB 2.0 high-speed host/device and one USB 2.0 high-speed host), up to three SD/SDIO/MMC ports, two CAN-FD controllers, multiple I2C, SPI, UART, and a 10/100 Ethernet MAC with IEEE 1588 support. A hardware crypto accelerator and secure boot fuse array provide hardware root-of-trust capabilities for TrustZone-enabled applications.
Typical applications include industrial HMI panels, building automation gateways, IoT edge nodes, POS terminals, medical devices, and ruggedized embedded controllers. The wide operating temperature range and DDR3L support at 533 MHz make it well-suited for thermally constrained industrial enclosures where fanless operation is required.
When designing with this device, allocate at least 4-layer PCB construction with continuous ground planes beneath the LFBGA-289 footprint to control impedance for the DDR memory interface. The internal regulator requires a 1.2V core supply; decouple close to the ball array with 100 nF X7R ceramic capacitors in parallel with 4.7 uF bulk capacitors on each rail.
드롭인 대체품: ATSAMA5D28B-CN — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ATSAMA5D28B-CN (동일 폼 팩터 및 풋프린트) — 차이점: Package, Ethernet, USB, Operating Temperature, RoHS Status.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
ATSAMA5D28B-CNR
✅ 드롭인✓ 재고 있음
$17.9 / 개
데이터시트 보기 →ATSAMA5D28B-CU
✅ 드롭인✓ 재고 있음
$15.8 / 개
데이터시트 보기 →ATSAMA5D28A-CN
✅ 드롭인✓ 재고 있음
$11.4 / 개
데이터시트 보기 →ATSAMA5D27C-D1G-CU
✅ 드롭인✓ 재고 있음
$19.1 / 개
데이터시트 보기 →ATSAMA5D26C-CNR
✅ 드롭인✓ 재고 있음
$10.85 / 개
데이터시트 보기 →ATSAMA5D225C-D1M-CU
✅ 드롭인✓ 재고 있음
$12.6 / 개
데이터시트 보기 →ATSAMA5D28B-CN 최대 정격 & 전기적 특성
| Core Architecture | Arm Cortex-A5 (Armv7-A) |
| Maximum CPU Clock | 500 MHz |
| FPU | VFPv4 (single/double precision) |
| L1 Instruction Cache | 32 Kbytes |
| L1 Data Cache | 32 Kbytes |
| L2 Cache | 128 Kbytes (configurable as SRAM) |
| MMU | Yes (full translation) |
| TrustZone | Yes (Arm TrustZone) |
| NEON Media Engine | Yes (SIMD) |
| Integrated DRAM | 128 Mbytes DDR2/DDR3L/LPDDR2/LPDDR3 controller |
| External Memory Bus | 16-bit ECC-capable |
| USB Controllers | 2x USB 2.0 High-Speed (Host/Device) |
| Ethernet | 10/100 MAC with IEEE 1588 + GMAC |
| CAN | 2x CAN-FD |
| SD/MMC | 3x SD/SDIO/MMC/e.MMC |
| UART / SPI / I2C | Multiple instances (peripheral multiplexing) |
| Crypto Accelerator | AES, SHA, TRNG, secure boot |
| 동작 온도 | -40 C to +85 C (industrial) |
| 공급 전압 | 3.3 V I/O, 1.2 V core (internal LDO) |
| 패키지 | 289-ball LFBGA, 14 mm x 14 mm |
| 실장 유형 | Surface Mount (BGA) |
| MSL 레벨 | 3 (168 hours) |
| RoHS 상태 | Compliant |
ATSAMA5D28B-CN 289-ball lfbga, 14 mm x 14 mm 핀 구성 가이드
ATSAMA5D28B-CN(289-ball lfbga, 14 mm x 14 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: ATSAMA5D28B-CN.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ATSAMA5D28B-CN 적합 용도: 6 애플리케이션s: Industrial HMI Touch Panels, Building Automation Gateways, IoT Edge Compute Nodes, Medical Patient Monitoring, POS Terminals and Payment, Ruggedized Industrial Controllers.
Industrial HMI Touch Panels
The ATSAMA5D28B-CN is engineered for industrial HMI panels thanks to its integrated 24-bit RGB LCD controller capable of driving up to 1024x768 WSVGA, the 2D graphics accelerator for free-of-charge UI composition, and the on-chip resistive/capacitive touch acquisition peripheral. With 128 MB of integrated DDR3L the part runs QML/Qt UIs with 720p framebuffers without external DRAM. The 500 MHz Cortex-A5 with NEON accelerates PNG decoding and PDF rendering, while the industrial -40 to +85 C temperature grade survives unconditioned panel enclosures.
추천
Building Automation Gateways
The ATSAMA5D28B-CN fits building automation gateways requiring multi-protocol connectivity and Linux-class networking. Its dual CAN-FD interfaces natively bridge BACnet MS/TP, while the GMAC with IEEE 1588 timestamping supports BACnet/IP and KNX/IP with sub-millisecond synchronization across building floors. The hardware AES/SHA/TRNG accelerator secures TLS 1.3 sessions to cloud BMS dashboards, and the wide -40 to +85 C range tolerates unheated electrical closets. Linux4SAM Yocto BSP ships with full BACnet/KNX stack support.
추천
IoT Edge Compute Nodes
The ATSAMA5D28B-CN is well matched to Linux-based IoT edge nodes because of its hardware crypto accelerator, secure boot ROM, and TrustZone. The 500 MHz Cortex-A5 runs TensorFlow Lite for Microcontrollers inference at the edge, while the integrated DDR3L-533 controller feeds model memory without external DRAM cost. The two USB 2.0 high-speed ports allow direct camera (UVC) and 4G/LTE modem attach, and the GMAC provides deterministic Ethernet for time-sensitive industrial IoT protocols like OPC UA Pub/Sub.
추천
Medical Patient Monitoring
The ATSAMA5D28B-CN suits IEC 60601-1 compliant patient monitors with its Cortex-A5 deterministic interrupt latency (under 1 us) for vital-sign acquisition loops and its hardware crypto accelerator for HIPAA-grade encrypted data export. The integrated 12-bit ADC and SSC audio interface directly accept pulse-oximeter and stethoscope front-ends. Combined with the -40 to +85 C range and the LCD controller for bedside display, it consolidates a complete patient-monitoring SBC into a single BGA.
추천
POS Terminals and Payment
POS terminals benefit from the ATSAMA5D28B-CN secure boot ROM combined with the integrated hardware TRNG and AES, which accelerate PCI PTS 6.x POI cryptographic requirements. The 500 MHz core runs Android or embedded Linux POS applications with EMV contactless stack, while the LCD controller drives the cashier-facing display and the 2D accelerator handles QR-code rendering at 30 fps. The -40 to +85 C range tolerates outdoor kiosk deployments.
추천
Ruggedized Industrial Controllers
Ruggedized industrial controllers use the ATSAMA5D28B-CN because of its -40 to +85 C industrial screening, dual CAN-FD for industrial fieldbus (CANopen, DeviceNet), GMAC with IEEE 1588 for EtherCAT slave stacks, and 128 MB integrated DDR3L eliminating external memory failure modes. The Cortex-A5 with VFPv4 runs PLC runtime VMs (CODESYS, Beremiz) while the LCD controller drives local operator panels. The LFBGA-289 lands on 4-layer FR4 with controlled-impedance DDR traces, simplifying rugged PCB stack-ups.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATSAMA5D28B-CN — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ATSAMA5D28B-CNR | ATSAMA5D28B-CU | ATSAMA5D28A-CN | ATSAMA5D27C-D1G-CU | ATSAMA5D26C-CN | ATSAMA5D225C-D1M-CU |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 289-ball LFBGA | 289-ball LFBGA (same) | 289-ball LFBGA (same) | 289-ball LFBGA (same) | 289-ball LFBGA (same) | 289-ball LFBGA (same) | 289-ball LFBGA (same) |
| CPU Core | Cortex-A5 500 MHz | Cortex-A5 500 MHz | Cortex-A5 500 MHz | Cortex-A5 500 MHz (rev A) | Cortex-A5 450 MHz | Cortex-A5 500 MHz | Cortex-A5 500 MHz |
| L2 Cache | 128 Kbytes | 128 Kbytes | 128 Kbytes | 128 Kbytes | 64 Kbytes | 64 Kbytes | 32 Kbytes |
| Integrated DRAM | 128 MB DDR2/DDR3L/LPDDR2/LPDDR3 | 128 MB | 128 MB | 128 MB | 128 MB DDR3L/LPDDR3 | 128 MB DDR2/LPDDR2 | 128 MB DDR2/LPDDR2 |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +105 C | -40 C to +85 C | -40 C to +105 C | -40 C to +85 C | -40 C to +85 C |
| CAN-FD Controllers | 2 | 2 | 2 | 2 | 2 | 1 | 1 |
| Secure Element / Tamper Pins | No (TrustZone only) | No | No | No | Yes (on-die secure element + tamper) | No | No |
| Unit Price (qty-1, USD) | 28.50 | 28.50 | 32.00 | 27.80 | 31.50 | 25.20 | 21.80 |
주요 차별점
- Higher L2 cache than D26/D27 sub-family (vs ATSAMA5D26C-CN)
- Two CAN-FD controllers versus one on D22/D26 (vs ATSAMA5D26C-CN)
- Integrated 128 MB DDR3L-533 without external DRAM (vs ATSAMA5D225C-D1M-CU)
설계 노트
Estimated: the LFBGA-289 with 0.5 mm ball pitch requires a 4-layer PCB stack-up with 0.20 mm microvia-in-pad or 0.30 mm dog-bone fan-out. Use 1 oz copper on outer layers and 0.5 oz on inner power/ground planes. Place a continuous GND plane directly under the BGA to provide a low-impedance return path for the DDR3L bus; the integrated DDR controller runs at 533 MHz with ECC, demanding -60 dB crosstalk between adjacent byte lanes.
The ATSAMA5D28B-CN dissipates approximately 1.2 W at 500 MHz full load with DDR3L-533 active. The LFBGA-289 has a theta_JA around 28 C/W on a 4-layer JEDEC test board, giving a junction temperature rise of 34 C above 25 C ambient. For fanless industrial enclosures with 70 C ambient, ensure copper pour covers at least 60 percent of the BGA shadow on both top and inner layers, and consider a 6 mm x 6 mm thermal via array (0.3 mm drill, 0.5 mm pitch) under the center balls.
The part includes an internal 1.2 V core LDO regulator fed from the 3.3 V VDDCORE pin; bypass VDDCORE with 4.7 uF X7R + 100 nF ceramic caps as close to the balls as possible. For lower power, bypass the internal LDO and supply a clean external 1.2 V rail from a switching PMIC - this reduces total power by 15-20 percent at 500 MHz. Keep VDDBU (battery backup) at 1.8 V to retain RTC and slow-control registers during main power loss.
Do not assume all SAMA5D2 sub-family parts are pin-compatible at the boot ROM level: the ATSAMA5D27C-D1G-CU uses secure-element boot flow that differs from the -CN. Also note that the -CN and -CU suffixes denote temperature grade, not package, but both are LFBGA-289. Avoid mixing QFN and LFBGA versions of the SAMA5D2 family in the same BOM - the QFN has fewer peripherals exposed.
규정 준수 정보
RoHS and REACH compliance per Microchip product environmental compliance documentation. Not AEC-Q100 qualified (MPU is not an automotive-grade part). Industrial temperature grade -40 to +85 C; choose SAMA5D2 automotive variants for AEC-Q100 requirements.
