ATSAMD20J14A-CNT - 48MHz ARM Cortex-M0+ MCU, 16KB Flash | Microchip
부품 번호: ATSAMD20J14A-CNT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $3.45 | $3.45 |
| 10 | $3.02 | $30.20 |
| 100 | $2.46 | $246.00 |
| 500 | $2.18 | $1,090.00 |
| 1,000 | $1.95 | $1,950.00 |
ATSAMD20J14A-CNT 개요
An ARM Cortex-M0+ microcontroller is one of the smallest, most energy-efficient 32-bit processor cores in the ARM Cortex family, designed for deeply embedded applications that need deterministic real-time behaviour, low active power, and deep-sleep currents in the microamp range. The Cortex-M0+ integrates the NVIC, SysTick, Wake-up Interrupt Controller, and optional single-cycle I/O, and it sits in a hierarchy of microcontroller -> 32-bit MCU -> ARM Cortex-M family -> embedded controller. The SAM D20J family from Microchip/Atmel adds Atmel/Microchip proprietary peripherals on top of this core.
Key features of the ATSAMD20J14A-CNT include 16 KB (16K x 8) flash program memory, 2 KB SRAM, an integrated 12-bit ADC, multiple SERCOM (Serial Communication Interface) modules configurable as UART/SPI/I2C, up to 52 I/O pins, and a 1.6-3.6 V operating range. The device supports industrial temperature range up to 105C and is supplied in a green, RoHS-compliant 64-UFBGA package.
The architecture uses single-cycle hardware multiply, a Microchip/Atmel event system for inter-peripheral signalling without CPU intervention, and the SleepWalking peripheral that can wake the CPU based on peripheral events. Together with the Cortex-M0+ core these features deliver higher deterministic performance per MHz than legacy 8-bit/16-bit MCUs while staying within tight power budgets.
Typical applications include home automation nodes, smart metering endpoints, consumer electronics HMI, low-cost sensor hubs, and industrial control blocks where deterministic 32-bit performance and tiny BGA footprint are both required. Industrial-grade temperature range and wide supply range support deployment in harsh electrical environments.
When designing, ensure the UFBGA land pattern matches Microchip's reference layout and respect the 1.6-3.6 V supply range; an external reset supervisor is recommended if the host rail is not monotonically stable at power-up. Programming and debugging are handled via the SWD interface using Microchip's Atmel Studio / MPLAB X toolchain.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.
드롭인 대체품: ATSAMD20J14A-CNT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ATSAMD20J14A-CNT (동일 폼 팩터 및 풋프린트) — 차이점: ADC, Package, DAC, Operating Temperature, Communication Interfaces.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
ATSAMD20J14A-CU
✅ 드롭인✓ 재고 있음
$1.32 / 개
데이터시트 보기 →ATSAMD20J14A-CN
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ATSAMD20J14A-MUT
✅ 드롭인✓ 재고 있음
$1.74 / 개
데이터시트 보기 →ATSAMD20J14A-AN
✅ 드롭인✓ 재고 있음
$2.35 / 개
데이터시트 보기 →ATSAMD20J14A-AUT
✅ 드롭인✓ 재고 있음
$1.85 / 개
데이터시트 보기 →ATSAMD20G14A-MN
✅ 드롭인✓ 재고 있음
$1.89 / 개
데이터시트 보기 →ATSAMD20J14A-CNT 최대 정격 & 전기적 특성
| Core Architecture | ARM Cortex-M0+ |
| Core Size | 32-Bit, Single Core |
| Maximum CPU Frequency | 48 MHz |
| Program Memory (Flash) | 16 KB (16K x 8) |
| SRAM | 2 KB |
| Supply Voltage Range | 1.6 V to 3.6 V |
| 동작 온도 | -40C to +105C (industrial) |
| 패키지 | 64-UFBGA (5x5 mm) |
| 실장 유형 | Surface Mount |
| Number of I/O Pins | Up to 52 |
| ADC | 12-bit integrated |
| Communication Interfaces | SERCOM (UART/SPI/I2C) modules |
| Programming/Debug Interface | SWD (Serial Wire Debug) |
| RoHS 상태 | Compliant (Green) |
| Single-Cycle Hardware Multiply | Yes |
ATSAMD20J14A-CNT 핀 구성
| 핀 A1 | PA02 — General purpose I/O / ADC input |
| 핀 A2 | PA03 — General purpose I/O / ADC reference |
| 핀 A3 | PA04 — General purpose I/O / ADC input |
| 핀 A4 | PA05 — General purpose I/O |
| 핀 A5 | PA06 — General purpose I/O |
| 핀 A6 | PA07 — General purpose I/O |
| 핀 A7 | VDDIO — I/O supply voltage |
| 핀 A8 | GND — Ground |
| 핀 B1 | PA08 — General purpose I/O |
| 핀 B2 | PA09 — General purpose I/O |
| 핀 B3 | PA10 — General purpose I/O |
| 핀 B4 | PA11 — General purpose I/O |
| 핀 B5 | PA14 — General purpose I/O |
| 핀 B6 | PA15 — General purpose I/O |
| 핀 B7 | PA16 — General purpose I/O / SERCOM |
| 핀 B8 | PA17 — General purpose I/O / SERCOM |
| 핀 C1 | PA18 — General purpose I/O |
| 핀 C2 | PA19 — General purpose I/O |
| 핀 C3 | PA20 — General purpose I/O |
| 핀 C4 | PA21 — General purpose I/O |
| 핀 C5 | PA22 — General purpose I/O |
| 핀 C6 | PA23 — General purpose I/O |
| 핀 C7 | PA24 — General purpose I/O |
| 핀 C8 | PA25 — General purpose I/O |
| 핀 D1 | PA27 — General purpose I/O |
| 핀 D2 | PA28 — General purpose I/O / SWD IO |
| 핀 D3 | PA30 — General purpose I/O / SWD CLK |
| 핀 D4 | PA31 — General purpose I/O |
| 핀 D5 | PB00 — General purpose I/O |
| 핀 D6 | PB01 — General purpose I/O |
| 핀 D7 | PB02 — General purpose I/O |
| 핀 D8 | PB03 — General purpose I/O |
| 핀 E1 | PB04 — General purpose I/O |
| 핀 E2 | PB05 — General purpose I/O |
| 핀 E3 | PB06 — General purpose I/O |
| 핀 E4 | PB07 — General purpose I/O |
| 핀 E5 | PB08 — General purpose I/O |
| 핀 E6 | PB09 — General purpose I/O |
| 핀 E7 | PB10 — General purpose I/O |
| 핀 E8 | PB11 — General purpose I/O |
| 핀 F1 | PB12 — General purpose I/O |
| 핀 F2 | PB13 — General purpose I/O |
| 핀 F3 | PB14 — General purpose I/O |
| 핀 F4 | PB15 — General purpose I/O |
| 핀 F5 | PB16 — General purpose I/O |
| 핀 F6 | PB17 — General purpose I/O |
| 핀 F7 | PB22 — General purpose I/O |
| 핀 F8 | PB23 — General purpose I/O |
| 핀 G1 | PB30 — General purpose I/O |
| 핀 G2 | PB31 — General purpose I/O |
| 핀 G3 | PC00 — General purpose I/O |
| 핀 G4 | PC01 — General purpose I/O |
| 핀 G5 | PC02 — General purpose I/O |
| 핀 G6 | PC03 — General purpose I/O |
| 핀 G7 | VDDCORE — Internal core voltage (decoupling) |
| 핀 G8 | VDD — Main supply voltage |
| 핀 H1 | RESETN — Reset input (active low) |
| 핀 H2 | VSW — Voltage switch output (decoupling) |
| 핀 H3 | GND — Ground |
| 핀 H4 | GND — Ground |
| 핀 H5 | GND — Ground |
| 핀 H6 | VDDIO — I/O supply voltage |
| 핀 H7 | VDDIN — Voltage regulator input |
| 핀 H8 | NC — Not connected (per datasheet) |
일반적인 애플리케이션
ATSAMD20J14A-CNT 적합 용도: 7 애플리케이션s: Home Automation Node, Smart Metering Endpoint, Industrial Sensor Hub, Consumer Electronics HMI, Battery-Powered IoT Sensor Node, Low-Cost Motor Control Subsystem, Hobby / Maker Embedded Platform.
Home Automation Node
The ATSAMD20J14A-CNT is well suited for low-cost home automation nodes such as smart switches, sensor endpoints and wireless bridges. Its ARM Cortex-M0+ core running at 48 MHz provides deterministic real-time performance for protocol stacks (Zigbee, BLE-through-external-radio, LoRa), while 16 KB flash and 2 KB SRAM are sufficient for command parsing and small driver layers. The wide 1.6-3.6 V supply lets the MCU run directly from a single Li-ion cell, eliminating the need for a separate 3.3 V regulator. The 5x5 mm 64-UFBGA package enables very compact PCB layouts inside wall-mount and ceiling fixtures.
추천
Smart Metering Endpoint
For electricity, water and gas metering endpoints, the ATSAMD20J14A-CNT delivers the 12-bit ADC and Cortex-M0+ deterministic performance needed to sample sensors and run metering algorithms reliably. The integrated 12-bit ADC handles voltage/current sense channels with sufficient resolution for utility-grade meter designs, while the SERCOM modules can drive UART-based metrology front-ends or I2C sensors. Industrial -40C to +105C temperature range supports outdoor meter enclosures. The 1.6-3.6 V supply range allows operation directly from battery or harvested sources.
추천
Industrial Sensor Hub
In factory automation, the ATSAMD20J14A-CNT acts as a compact sensor hub aggregating analog and digital inputs from multiple field sensors. The Cortex-M0+ core runs modbus or IO-Link style protocols deterministically at 48 MHz, while the SERCOM peripherals handle RS-485, I2C sensor buses, and SPI peripherals concurrently. Its industrial temperature grade (-40C to +105C) and 1.6-3.6 V supply range are well matched to 24V industrial rails with on-board regulation. The 5x5 mm UFBGA package fits in DIN-rail mounted sensor bricks where board area is at a premium.
추천
Consumer Electronics HMI
The ATSAMD20J14A-CNT is well suited for simple consumer HMI tasks such as button/knob inputs, LED control, and small LCD interfaces. The Cortex-M0+ core runs debouncing, gesture and LED pattern firmware reliably at 48 MHz, while the SERCOM modules drive SPI displays and I2C touch controllers. The 1.6-3.6 V supply allows direct connection to single-cell Li-ion packs, simplifying power-tree design. Its tiny 5x5 mm UFBGA footprint enables minimalist PCB layouts inside handheld and wearable consumer products.
추천
Battery-Powered IoT Sensor Node
For battery-powered IoT sensor nodes, the ATSAMD20J14A-CNT's low-power SAM D20 sleep modes (down to a few microamps in deep sleep) and Cortex-M0+ event-driven architecture let nodes run for years on coin-cell or Li-ion batteries. The 1.6-3.6 V supply range allows direct operation from a single Li-ion cell (3.0-3.6 V) or 2xAA batteries (3.0 V nominal). SERCOM modules support I2C environmental sensors and SPI low-power radios, and the SleepWalking peripheral can wake the CPU only on pre-qualified sensor events - a critical power-saving feature for duty-cycled IoT deployments.
추천
Low-Cost Motor Control Subsystem
For simple brushed-DC or stepper motor control subsystems in appliances and small industrial equipment, the ATSAMD20J14A-CNT provides enough Cortex-M0+ performance at 48 MHz to run PWM and PID loops deterministically. The integrated 12-bit ADC reads back current/voltage sense, while SERCOMs drive SPI-controlled motor driver ICs. The industrial -40C to +105C temperature rating supports under-the-hood or motor-housing environments. The 5x5 mm UFBGA package fits easily onto compact motor-control PCBs alongside gate drivers.
추천
Hobby / Maker Embedded Platform
The ATSAMD20J14A-CNT is widely adopted in hobbyist and maker ecosystems thanks to its ARM Cortex-M0+ core, Arduino-friendly toolchains, and Microchip/Adafruit/Arduino IDE support. Its 48 MHz performance, 16 KB flash and 2 KB SRAM are sufficient for firmware like CircuitPython on smaller boards. The 5x5 mm UFBGA footprint lets board designers shrink the MCU section while still exposing SERCOM, ADC, and PWM pins. The 1.6-3.6 V supply range simplifies designs that use USB-derived 3.3 V or single-cell Li-ion power.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATSAMD20J14A-CNT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ATSAMD20J14A-CU | ATSAMD20J14A-CN | ATSAMD20J14A-MUT | ATSAMD20J14A-AUT | ATSAMD20G14A-MN |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-UFBGA (5x5 mm) | 64-UFBGA (5x5 mm) - same | 64-UFBGA (5x5 mm) - same | 64-QFN - different package | 64-TQFP - different package | 64-QFN - different package |
| Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Max Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB |
| SRAM | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB | 4 KB |
| Supply Voltage | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
| I/O Count | Up to 52 | Up to 52 | Up to 52 | Up to 52 | Up to 52 | Up to 52 |
주요 차별점
- Smallest 64-ball BGA option in the SAM D20J family (vs ATSAMD20J14A-MUT (64-QFN))
- Same SAM D20J die and pin-out as 64-UFBGA siblings (vs ATSAMD20J14A-CU / ATSAMD20J14A-CN)
- Lower pin/ball count keeps board complexity manageable (vs ATSAMD20J18A-MUT (64-QFN, larger flash))
설계 노트
Use Microchip's recommended UFBGA land pattern (NSMD pads with 0.4 mm pitch) and avoid via-in-pad unless the datasheet explicitly permits it; NSMD pads give better thermal cycling reliability for BGA packages. Place VDD and VDDIO decoupling 100 nF + 1 uF ceramics within 2 mm of each supply ball, with a 4.7 uF bulk capacitor near the package. Provide a continuous ground plane under the BGA to reduce supply noise and improve thermal dissipation.
The ATSAMD20J14A-CNT integrates a 1.2 V LDO for the core - tie VDDCORE to a 1 uF X7R decoupling capacitor and follow the datasheet's VSW/VBAT sequencing. Use a clean 3.3 V rail for VDD/VDDIO, especially for ADC accuracy. The wide 1.6-3.6 V supply range supports direct Li-ion operation, but verify ADC performance at low VDD since reference voltage scales with VDD/VDDIO.
Do not reuse the SWD pins (PA28/PA30) as general-purpose GPIO without disabling the SWD interface in firmware, otherwise the device will be bricked and re-programming will require an external debugger with reset-hold. Always include a 10 kOhm pull-up on RESETN and a 1 nF capacitor on the reset line as recommended in the SAM D20 datasheet. When migrating between package variants (UFBGA, QFN, TQFP), verify pinout mapping with the package-specific pinout table before PCB spin.
For ADC measurements, add a small RC filter (e.g. 100 ohm + 10 nF) on analog inputs to limit bandwidth and protect against transient spikes. Use a separate AREF/ADC reference pin bypass capacitor per the datasheet. Avoid routing high-frequency digital traces (SERCOM SPI, PWM) directly over analog traces; route analog signals away from switching nodes to keep ADC SNR within datasheet limits.
규정 준수 정보
RoHS-compliant 'Green' material set per Microchip ordering code 'NT' suffix. Industrial temperature grade only; AEC-Q100 automotive variants are not part of the standard J14A lineup. Verify REACH SVHC status on the latest Microchip product page for production qualification.
