Microchip Technology

ATSAMD21E16B-MF - 48MHz Cortex-M0+ MCU | Microchip Technology

부품 번호: ATSAMD21E16B-MF ✓ 활성
1.62 V to 3.6 V Vdss 32-pin QFN-EP (5 x 5 mm) Package 48 MHz Speed 64 KB Memory
MOQ: 1 |

ATSAMD21E16B-MF 개요

The Microchip Technology ATSAMD21E16B-MF is a 32-bit ARM Cortex-M0+ microcontroller operating at up to 48 MHz, with 64 KB of embedded Flash memory and 8 KB of SRAM in a 32-pin QFN-EP package measuring 5 x 5 mm. Its operating voltage range is 1.62 V to 3.6 V, and the device is specified from -40°C to +125°C. The MCU includes 10-bit and 12-bit ADC resources, RoHS compliance, and an exposed-pad package for PCB thermal management.

A microcontroller is a programmable semiconductor that combines a CPU core, memory, and peripherals on one integrated circuit. The ATSAMD21E16 belongs to the SAM D21 family of general-purpose, low-power embedded processors. In the product hierarchy, it is an ARM Cortex-M0+ microcontroller, a 32-bit microcontroller, and an embedded-system controller commonly used for local sensing, communications, control, and human-interface functions.

The principal features of the ATSAMD21E16B-MF include its 48 MHz Cortex-M0+ core, 64 KB Flash program memory, and 8 KB SRAM. The 1.62 V to 3.6 V operating range supports low-voltage 3.3 V system designs while accommodating lower operating points for power-sensitive equipment. Its industrial temperature qualification covers -40°C to +125°C, and the 5 x 5 mm QFN-EP package supports compact PCB layouts.

The SAM D21 architecture is intended for low-cost, low-power embedded designs in which efficient event handling and integration of analog and digital functions are important. The Cortex-M0+ processor uses a 32-bit instruction set, while the device family combines serial communications, timers, and analog conversion resources in one package. The exposed pad provides a thermal and electrical connection to the PCB under the device.

Typical applications include industrial sensor controllers, compact data loggers, USB-connected peripherals, building-control nodes, and embedded instrument interfaces. The ATSAMD21E16B-MF is particularly suitable when local conversion, serial communications, and deterministic control are required without using a higher-cost Cortex-M3 or Cortex-M4 core. Its 48 MHz processing rate also provides useful headroom for protocol handling and moderate control-loop workloads.

PCB implementation should preserve the manufacturer's recommended decoupling and exposed-pad connection details. Place the input and output capacitors close to their associated power pins, connect the exposed pad to the ground plane, and confirm the pin assignment against the device data sheet before routing sensitive analog inputs. The wide temperature range makes the part suitable for industrial environments, but enclosure temperature, self-heating, and nearby heat sources must still be considered.

This product record combines the device architecture, package and environmental characteristics, verified manufacturer and distributor information, application guidance, and engineering-focused design considerations. It also provides a framework for comparing the ATSAMD21E16B-MF with related Microchip devices while keeping pin compatibility, memory requirements, package construction, and operating conditions as the principal selection criteria.

드롭인 대체품: ATSAMD21E16B-MF — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: ATSAMD21E16B-MF (동일 폼 팩터 및 풋프린트) — 차이점: Package, RoHS Status.

Microchip Technology
Package: 48-pin QFN
RoHS Status: Compliant
비교 대상: ATSAMD21E16B-MF →

이 제품에는 사용 가능한 드롭인 대체품이 없습니다.

대체품 요청

ATSAMD21E16B-MF 최대 정격 & 전기적 특성

Product Type 32-bit ARM Cortex-M0+ microcontroller
최대 클록 주파수 48 MHz
Core Architecture ARM Cortex-M0+
Processor Width 32 bit
Flash Memory 64 KB
SRAM 8 KB
Operating Voltage Range 1.62 V to 3.6 V
Nominal Supply Voltage 3.3 V
ADC Resolution 10 bit and 12 bit
GPIO Count 26
동작 온도 범위 -40°C to +125°C
패키지 32-pin QFN-EP (5 x 5 mm)
실장 유형 Surface mount
Exposed Pad Present
Packaging Form Tray
Green / Environmental Status Green
RoHS 상태 RoHS compliant
Functional Safety Functional Safety (FuSa) device
Program Memory Type Embedded Flash

ATSAMD21E16B-MF 32-pin qfn-ep (5 x 5 mm) 핀 구성 가이드

ATSAMD21E16B-MF(32-pin qfn-ep (5 x 5 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

ATSAMD21E16B-MF의 32-pin qfn-ep (5 x 5 mm) 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ATSAMD21E16B-MF.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ATSAMD21E16B-MF 적합 용도: 6 애플리케이션s: Industrial Sensor Controller, USB Connected Peripheral, Compact Data Logger, Building Control Node, Precision Instrument Interface, Embedded Communication Gateway.

🏭

Industrial Sensor Controller

The ATSAMD21E16B-MF fits industrial sensor nodes that combine analog measurement, digital conditioning, and local communications. Its 48 MHz Cortex-M0+ core provides processing headroom for filtering and protocol handling, while 64 KB Flash and 8 KB SRAM suit moderate firmware stacks. The 10-bit and 12-bit ADC resources support sensors requiring more than one conversion resolution, and 26 GPIO provide connections for inputs, outputs, status indicators, and alarms. Operating from 1.62 V to 3.6 V supports low-voltage sensor rails, while the -40°C to +125°C specification accommodates demanding industrial environments. The compact 5 x 5 mm QFN-EP package reduces board area, although designers should preserve the manufacturer's exposed-pad layout and verify sensor accuracy at the selected voltage and temperature.

🔌

USB Connected Peripheral

The ATSAMD21E16B-MF is suitable for compact USB-connected accessories requiring local control, configuration storage, and protocol handling. Its 48 MHz 32-bit Cortex-M0+ processor can support peripheral tasks and serial communication, while 64 KB Flash provides space for application firmware and 8 KB SRAM supports working buffers. Operating at a nominal 3.3 V simplifies integration with many USB transceiver and logic components. Designers should confirm the required USB controller, transceiver, connector, protection scheme, and bus-routing topology in the selected SAM D21 configuration. The 32-pin QFN-EP package supports dense layouts, but exposed-pad connection, local decoupling, and controlled impedance remain essential for reliable USB signal integrity.

🖥️

Compact Data Logger

The ATSAMD21E16B-MF can serve as the control processor in a compact data logger that records sensor values, timestamps events, and transfers information through a serial interface. The 48 MHz Cortex-M0+ core handles scheduling and data formatting, while 64 KB Flash stores firmware and 8 KB SRAM accommodates buffers during acquisition and transmission. The 26 GPIO allows connection of sensors, storage-control signals, status LEDs, and user controls. A 3.3 V operating point supports common embedded peripherals, and the -40°C to +125°C specification covers broad industrial environments. Flash endurance, write-cycle requirements, brownout behavior, and backup strategy should be evaluated according to the logging duty cycle. Board layout should separate analog inputs from switching nodes and route exposed-pad current into the ground system effectively.

🏠

Building Control Node

The ATSAMD21E16B-MF is appropriate for low-cost building-control nodes that monitor inputs and control actuators through embedded serial interfaces. Its 48 MHz Cortex-M0+ performance supports event handling, protocol servicing, and supervisory logic, while 64 KB Flash and 8 KB SRAM provide adequate capacity for compact gateway software. The 26 GPIO can be assigned to digital sensors, alarm inputs, indicator outputs, and status controls. The device's 1.62 V to 3.6 V operating range allows low-power design choices, and its -40°C to +125°C specification supports equipment intended for industrial environments. Installation conditions can still create local temperature rises, so enclosure placement and thermal analysis remain important. Firmware should include communication retries, safe-state behavior, and recovery logic for disconnected or corrupted sensors.

📟

Precision Instrument Interface

The ATSAMD21E16B-MF can control compact test and measurement instruments where local calibration, status reporting, and communication are needed. Its 48 MHz Cortex-M0+ core provides deterministic control for front-panel functions and data preparation, and its 64 KB Flash and 8 KB SRAM are suitable for moderate embedded applications. The 10-bit and 12-bit ADC resources can serve supervisory or auxiliary measurement channels where greater resolution is not required. The 5 x 5 mm QFN-EP package allows placement close to analog and interface circuitry, helping keep sensitive routes compact. Designers should use separate analog and digital grounding strategies, follow the package-specific exposed-pad guidance, and avoid routing high-current switching paths near precision inputs. Firmware must also distinguish measurement commands from configuration updates to maintain deterministic operation.

🌐

Embedded Communication Gateway

The ATSAMD21E16B-MF is suitable for small embedded gateways that translate between local serial interfaces and a host processor. Its 48 MHz Cortex-M0+ core can manage protocol conversion, buffer handling, and supervisory tasks, while 64 KB Flash and 8 KB SRAM accommodate compact networking and firmware layers. The 26 GPIO can support status LEDs, reset control, interface selection, and recoverable configuration lines. A 3.3 V operating point aligns with many communication components, although every attached device must be checked against the 1.62 V to 3.6 V MCU supply range. The 32-pin QFN-EP construction supports space-constrained boards, but power sequencing, ground return paths, and signal integrity must be designed around the manufacturer package recommendations. Firmware should include watchdog recovery and robust handling of partial or malformed serial messages.

추천 제품 요약

ATSAMD21E16B-MU Microchip Technology 사용처: Industrial Sensor Controller, USB Connected Peripheral, Compact Data Logger, Building Control Node, Precision Instrument Interface, Embedded Communication Gateway ATSAMD21E16 Base family member used for device-family identification 사용처: Industrial Sensor Controller, USB Connected Peripheral, Compact Data Logger, Building Control Node, Precision Instrument Interface, Embedded Communication Gateway
What are the key specifications of ATSAMD21E16B-MF that engineers should know?
The ATSAMD21E16B-MF is a 32-bit ARM Cortex-M0+ microcontroller rated for up to 48 MHz, with 64 KB of Flash and 8 KB of SRAM. It operates from 1.62 V to 3.6 V and is specified from -40°C to +125°C. The 32-pin QFN-EP package measures 5 x 5 mm and includes 10-bit and 12-bit ADC resources. According to the Microchip product page and manufacturer data sheet, the ATSAMD21E16 family is intended for general-purpose, low-cost, low-power embedded applications.
What is the operating voltage range of ATSAMD21E16B-MF?
The ATSAMD21E16B-MF operates from 1.62 V to 3.6 V, with a nominal operating point of 3.3 V. This range supports compact low-voltage embedded systems while remaining compatible with conventional 3.3 V peripherals. According to the Microchip ATSAMD21E16 product documentation, supply and signal limits must still be checked against the pin-specific constraints in the manufacturer data sheet before final circuit design.
What processor and memory does ATSAMD21E16B-MF use?
The ATSAMD21E16B-MF uses a single-core 32-bit ARM Cortex-M0+ processor operating at up to 48 MHz and contains 64 KB of Flash plus 8 KB of SRAM. According to Microchip's ATSAMD21E16 family information, the memory arrangement supports general-purpose embedded control, serial communication, and analog-processing workloads. The 64 KB Flash region is the primary target for firmware, while the 8 KB SRAM provides working memory for stacks, buffers, and application state.
Where can I download the ATSAMD21E16B-MF datasheet PDF?
The ATSAMD21E16B-MF documentation is available from Microchip's ATSAMD21E16 product page and through the manufacturer data-sheet link for the ATSAMD21E16B family. Use the pin-description table, electrical-characteristics section, and package drawings when assigning PCB nets. The ATSAMD21E16B-MF is the exact ordering code for the 32-pin QFN-EP, 125°C configuration, so verify that suffix before copying application details into a new design.
Where is the ATSAMD21E16B-MF pinout located?
The ATSAMD21E16B-MF pinout is documented in the pin-description table and package drawing within the Microchip ATSAMD21E16B manufacturer data sheet. Because the part uses a 32-pin QFN-EP package with an exposed pad, do not assign the pad solely from a generic QFN drawing. Use the package-specific land pattern and pin table when creating the symbol, footprint, and PCB netlist.
What can replace the ATSAMD21E16B-MF on an existing PCB?
The closest direct replacement is the ATSAMD21E16B-MU because it shares the 48 MHz Cortex-M0+ core, 64 KB Flash, 8 KB SRAM, 1.62 V to 3.6 V supply range, and 32-pin 5 x 5 mm QFN footprint. Its temperature suffix differs from the 125°C ATSAMD21E16B-MF, so it is suitable only when the lower temperature limit remains acceptable. No cross-brand drop-in replacement was established from the available cross-reference results.
Is ATSAMD21E16B-MF suitable for industrial sensor controllers?
Yes, the ATSAMD21E16B-MF is suitable for industrial sensor controllers that operate within -40°C to +125°C and need local analog conversion and real-time control. Its 48 MHz Cortex-M0+ core, 64 KB Flash, 8 KB SRAM, 10-bit and 12-bit ADC resources, and 26 GPIO support compact sensing nodes. The final design should also verify analog accuracy, communication requirements, and thermal performance at the intended board temperature.
ATSAMD21E16B-MF vs ATSAMD21E16B-MU: which temperature-grade variant should I choose?
Choose the ATSAMD21E16B-MF when the design must support the full -40°C to +125°C range. The ATSAMD21E16B-MU offers the same 48 MHz Cortex-M0+ performance, 64 KB Flash, 8 KB SRAM, 1.62 V to 3.6 V voltage range, and 32-pin QFN footprint, but it does not match the higher-temperature ordering configuration of the target. Confirm the exact temperature limits and package details in the manufacturer data sheet before substitution.
When should I choose ATSAMD21E16B-MF instead of a larger Microchip microcontroller?
Choose the ATSAMD21E16B-MF when 64 KB Flash, 8 KB SRAM, a 48 MHz Cortex-M0+ core, and 26 GPIO are sufficient for the product. Its 5 x 5 mm QFN-EP package can reduce board area, but the exposed pad requires proper PCB layout and thermal review. Move to a larger-memory or higher-performance device only when firmware size, processing demand, peripheral count, or environmental requirements exceed those supported by the ATSAMD21E16 family.
What is the best Microchip equivalent for ATSAMD21E16B-MF?
The ATSAMD21E16B-MU is the closest same-package Microchip equivalent because it retains the 32-bit Cortex-M0+ core at 48 MHz, 64 KB Flash, 8 KB SRAM, 1.62 V to 3.6 V supply range, and 32-pin 5 x 5 mm QFN construction. The principal distinction is the temperature-grade suffix. Use it only after checking operating-temperature requirements and confirming that the exact package pinout remains unchanged.
How much power-related design attention does ATSAMD21E16B-MF require?
The ATSAMD21E16B-MF is a low-power 3.3 V microcontroller, but final power consumption depends on clock settings, active peripherals, I/O loading, and sleep-mode configuration. The 1.62 V to 3.6 V operating range allows supply selection appropriate to the system. Designers should use the manufacturer power-consumption characteristics, preserve local decoupling, and account for regulator efficiency and exposed-pad heat spreading when estimating battery life.
Does the ATSAMD21E16B-MF support RoHS-compliant manufacturing?
Yes, the ATSAMD21E16B-MF is identified as RoHS compliant and as a green product. The Microchip product information also lists the part in a 125°C, 3.3 V, 32-QFN configuration. REACH, AEC-Q100, halogen-free status, and conflict-minerals status are not established by the available product records, so those attributes should remain unknown until supported by an applicable manufacturer declaration.
Can ATSAMD21E16B-MF be used with a 3.3 V USB peripheral design?
The ATSAMD21E16B-MF is a practical choice for a compact 3.3 V peripheral because its 1.62 V to 3.6 V operating range includes 3.3 V, and the 48 MHz Cortex-M0+ core can manage protocol and control tasks. Its 64 KB Flash and 8 KB SRAM suit moderate USB-facing firmware stacks. Confirm USB electrical requirements, connector protection, bus-routing topology, and firmware resource use against the selected peripheral configuration.
Is the ATSAMD21E16B-MF active?
The Microchip ATSAMD21E16 family is presented as a current general-purpose product, and the ATSAMD21E16B-MF remains listed by manufacturer and distributor channels. Its ordering code identifies a 32-pin QFN-EP device with a 125°C temperature configuration. Confirm current lifecycle and orderable packaging status through the Request a Quote form or Microchip's product page before committing a production BOM.
Where to buy ATSAMD21E16B-MF online and what is its price?
The ATSAMD21E16B-MF can be requested through the Request a Quote form on this page. Current unit pricing, stock, quantity breaks, and lead time should be confirmed there because commercial terms and inventory can change. The part is specified as a 32-pin QFN-EP, 48 MHz Cortex-M0+ MCU with 64 KB Flash and an industrial temperature range of -40°C to +125°C.
What is the lead time for ATSAMD21E16B-MF?
The current lead time for the ATSAMD21E16B-MF depends on order quantity, package availability, and market conditions. Use the Request a Quote form on this page to request current production allocation and delivery information. For planning, identify the exact package and temperature suffix as ATSAMD21E16B-MF, because changes to the ordering code can change the delivery configuration even when the underlying MCU family remains the same.
What programming and development tools are suitable for ATSAMD21E16B-MF?
The ATSAMD21E16B-MF is supported within Microchip's SAM D21 ecosystem, which includes development tools and programming interfaces for ARM Cortex-M0+ devices. The appropriate tool choice depends on the selected debugger, programming adapter, and firmware-debug configuration. Engineers should follow the Microchip ATSAMD21E16 data sheet for pin multiplexing, SWD connections, clock setup, and peripheral configuration rather than relying on a generic Cortex-M programming template.

엔지니어링 참조 데이터: ATSAMD21E16B-MF — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the ATSAMD21E16B-MF for a compact 3.3 V embedded design that requires a 48 MHz 32-bit Cortex-M0+ core, 64 KB Flash, 8 KB SRAM, 26 GPIO, and operation across -40°C to +125°C. Its 5 x 5 mm QFN-EP package is attractive for dense boards, but the exposed pad, local decoupling, and analog layout must follow Microchip's package guidance. ATSAMD21E16B-MU is the closest same-footprint family option when its temperature rating is adequate, but it should not be substituted solely because the core and memory match. The ATSAMD21E16B-AZVAO and ATSAMD21E16B-AFT alternatives use larger TQFP packages and therefore are not drop-in choices for an existing QFN layout. ATSAMD21J17A-MF is a related 32-QFN device, but its memory configuration and pin-level behavior require validation before use as a replacement.

대체품과의 비교

파라미터 이 제품
Product Type 32-bit ARM Cortex-M0+ microcontroller
Maximum Clock Frequency 48 MHz
Flash Memory 64 KB
SRAM 8 KB
Operating Voltage Range 1.62 V to 3.6 V
Operating Temperature Range -40°C to +125°C
ADC Resolution 10 bit and 12 bit
GPIO Count 26
Package 32-pin QFN-EP (5 x 5 mm)
Brand Microchip Technology

주요 차별점

  • Extended 125°C temperature configuration (vs ATSAMD21E16B-MU)
  • Compact exposed-pad package integration (vs ATSAMD21E16B-AZVAO)
  • Consistent low-voltage 3.3 V architecture (vs ATSAMD21J17A-MF)

설계 노트

Follow the ATSAMD21E16B package drawing and pin-description table when creating the QFN-EP footprint. The ATSAMD21E16B-MF uses a 5 x 5 mm package with an exposed pad, so the pad must be connected according to the manufacturer land-pattern guidance. Place the required input, output, and bypass capacitors close to their power pins, minimize loop area, and provide uninterrupted ground-plane access beneath the exposed pad to support both electrical and thermal performance.

Design the supply rail for the full 1.62 V to 3.6 V device range and the selected peripheral loads. Check regulator headroom, startup behavior, and the MCU's current consumption under the intended clock, analog, and communication configuration. Place bulk capacitance near the power source and local ceramic decoupling at the package pins. Confirm brownout and power-reset behavior in the firmware design, especially where Flash writes or external interface state must survive an unexpected supply interruption.

Separate analog inputs, ADC references, and sensitive communication routes from switching or high-current paths. Use the manufacturer pin-multiplexing table before assigning multiplexing capabilities because alternate peripheral functions can constrain the usable 26 GPIO lines. Keep the debug and programming interface accessible after assembly, and check every external signal against the device's operating-voltage and absolute-maximum limits. The exact pin names are not enumerated here; use the package-specific data sheet table for final schematic and netlist work.

The exposed pad is an important thermal path, but its effectiveness depends on the PCB stack-up, copper area, and internal via arrangement. Provide a continuous ground reference beneath the device and thermal vias where recommended by Microchip's package guidance. Estimate worst-case junction temperature from ambient temperature, board thermal resistance, and total device dissipation. Actual operating temperature can exceed ambient because nearby regulators, power devices, and enclosed electronics also contribute heat.

Do not treat ATSAMD21E16B-MF, ATSAMD21E16B-MU, ATSAMD21E16B-MFT, and other ordering suffixes as automatically interchangeable. Package dimensions, temperature grade, tape-and-reel or tray format, and device suffix conventions can differ. Validate the exact ordering code, exposed-pad implementation, supported temperature range, and firmware assumptions. Reusing an existing PCB also requires confirmation that the alternate suffix has the same pin multiplexing, electrical limits, and startup behavior.

규정 준수 정보

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The product listing identifies the ATSAMD21E16B-MF as RoHS compliant and green. No manufacturer declarations establishing REACH, halogen-free, conflict-minerals, or AEC-Q100 status were returned. AEC-Q100 is marked not applicable because the identified ordering configuration is a general-purpose industrial-temperature MCU rather than an explicitly automotive-qualified variant.

데이터 검증일: 2026-11-15 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

atsamd21e16b aut atsamd21e16b mft ATSAMD21E16B-MF datasheet ATSAMD21E16B-MF pinout ATSAMD21E16B-MF datasheet pdf ATSAMD21E16B-MF equivalent ATSAMD21E16B-MF replacement ATSAMD21E16B-MF cross reference ATSAMD21E16B-MF vs ATSAMD21E16B-MU ATSAMD21E16B-MF QFN footprint ATSAMD21E16B-MF 48MHz specifications ATSAMD21E16B-MF price ATSAMD21E16B-MF stock Microchip ATSAMD21E16B-MF

관련 부품 & 용어

Microchip Technology ATSAMD21E16B-MF ATSAMD21E16 ATSAMD21E16B-MU ATSAMD21E16B-MFT ATSAMD21E16B-AZVAO ATSAMD21E16B-AFT ATSAMD21J17A-MF ARM Cortex-M0+ 32-bit microcontroller embedded microcontroller semiconductor SAM D21 family Flash memory SRAM QFN-EP QFN package family surface-mount package ADC 10-bit ADC 12-bit ADC GPIO 1.62 V to 3.6 V operation 48 MHz clock RoHS REACH industrial temperature range exposed pad USB industrial sensor controller
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기