Microchip Technology

ATSAML11D14A-YF - 32MHz Cortex-M23 Secure MCU | Microchip

부품 번호: ATSAML11D14A-YF ✓ 활성
<25 uA/MHz Id 24-SSOP Package 32 MHz Speed 16 KB (16K x 8) Memory
MOQ: 1 |

ATSAML11D14A-YF 개요

The Microchip Technology ATSAML11D14A-YF is a low-power 32-bit Arm Cortex-M23 microcontroller with a 32 MHz maximum clock, 16 KB of flash memory, and 8 KB of SRAM in a 24-SSOP package. It combines microcontroller processing with hardware-backed security, including Arm TrustZone-M, secure key storage, crypto support, and tamper resistance, making it suitable for compact embedded control and IoT products.

An Arm Cortex-M23 microcontroller is a 32-bit embedded processor within the microcontroller and semiconductor hierarchy. It executes interrupt-driven firmware for control, measurement, communications, and security functions while adding the efficiency expected from an embedded processor. The ATSAML11D14A-YF also integrates SERCOM peripherals, ADC, DAC, op amp, and other analog resources, reducing the need for discrete support components in connected low-power equipment.

The device operates at up to 32 MHz and includes 16 KB of flash, 8 KB of SRAM, and 2 KB of EEPROM. According to the Microchip product page, active-mode consumption is less than 25 uA/MHz and sleep-mode consumption is less than 100 nA. These figures make the microcontroller appropriate for duty-cycled systems that spend most of their operating time between brief processing intervals.

Security is implemented at the chip level rather than relying only on software controls. Arm TrustZone-M separates secure and non-secure software, while secure key storage, crypto accelerators, and tamper-resistance features protect credentials and sensitive operations. These capabilities are particularly relevant to connected devices that update firmware, store authentication material, or communicate across trust boundaries.

Typical uses include secure IoT endpoints, industrial sensing modules, low-power condition-monitoring equipment, compact security controllers, and connected measurement products. The integrated ADC and DAC support analog signal acquisition and output, while SERCOM interfaces support compact serial communications. The 24-SSOP package is appropriate for designs requiring more conventional through-hole-style lead access than fine-pitch QFN alternatives without using a large board area.

PCB planning should preserve access to all 24 package leads and provide the decoupling and signal-integrity layout specified by the manufacturer datasheet. Pay particular attention to exposed supply, ground, reset, and programming pins when routing the board. For firmware development, confirm the supported ATSAML11 family toolchain, debugger, boot configuration, and peripheral pin-mux requirements before committing the PCB layout.

This page combines the key electrical characteristics, verified ordering information, secure-I/O feature set, and practical replacement guidance for engineers evaluating the ATSAML11D14A-YF as a compact low-power Cortex-M23 design platform.

드롭인 대체품: ATSAML11D14A-YF — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: ATSAML11D14A-YF (동일 폼 팩터 및 풋프린트) — 차이점: Package, Core Architecture, Active Mode Current, Operating Temperature Range, RoHS Status.

Microchip Technology
Core Architecture: ARM Cortex-M23 with TrustZone-M
Operating Temperature Range: -40 C to +125 C (industrial)
RoHS Status: Compliant (per Microchip product page)
비교 대상: ATSAML11D14A-YF →
Microchip Technology
Package: 24-pin SSOP
Core Architecture: ARM Cortex-M23 (Armv8-M baseline)
Operating Temperature Range: -40 C to +125 C (industrial)
비교 대상: ATSAML11D14A-YF →
Microchip Technology
Package: 24-SSOP (0.209", 5.30mm width)
Core Architecture: 32-bit RISC
RoHS Status: Compliant
비교 대상: ATSAML11D14A-YF →
Microchip Technology
Package: 24-pin SSOP (0.209 in, 5.30 mm width)
Active Mode Current: Less than 25 uA/MHz
Operating Temperature Range: -40 °C to +125 °C
비교 대상: ATSAML11D14A-YF →

ATSAML11D14A-YU

✅ 드롭인
Microchip Technology
📦 24-SSOP
ARM Cortex-M23 · 32-bit RISC · 32 MHz · 16 KB (16K x 8) · 8 KB · ARM TrustZone-M, secure key storage, tamper resistance · Hardware crypto acceleration (AES, True Random Number Generator) · <25 uA/MHz

가격 문의

데이터시트 보기 →

ATSAML11D14A-YFT

✅ 드롭인
Microchip Technology
📦 24-SSOP
ARM Cortex-M23 (Armv8-M baseline) · 1 (Single-core) · 32 MHz · 32-bit · 16 KB (16K x 8) · 8 KB · 1.62 V to 3.63 V

가격 문의

데이터시트 보기 →

ATSAML11D15A-YF

✅ 드롭인
Microchip Technology
📦 24-SSOP
32-bit Microcontroller · Arm Cortex-M23 · 32 MHz · 32 KB (32K x 8) · 8 KB · 1.62 V to 3.63 V · 17 · 24-pin SSOP (0.209 in, 5.30 mm width)

가격 문의

데이터시트 보기 →

ATSAML11D14A-YF 최대 정격 & 전기적 특성

Product Type 32-bit ARM Cortex-M23 Microcontroller
Architecture Single-core ARM Cortex-M23
최대 클록 주파수 32 MHz
Flash Memory 16 KB (16K x 8)
SRAM 8 KB
EEPROM 2 KB
Security ARM TrustZone-M, secure key storage, crypto, and tamper resistance
Peripheral Interfaces SERCOM, ADC, DAC, OPAMP, and AC
Active Mode Current <25 uA/MHz
Sleep Mode Current <100 nA
패키지 24-SSOP
Package Dimensions 0.209 in x 5.30 mm
실장 유형 Surface Mount

ATSAML11D14A-YF 0.209 in x 5.30 mm 핀 구성 가이드

ATSAML11D14A-YF(0.209 in x 5.30 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

ATSAML11D14A-YF의 0.209 in x 5.30 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ATSAML11D14A-YF.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ATSAML11D14A-YF 적합 용도: 6 애플리케이션s: Secure IoT Sensor Endpoint, Industrial Condition Monitoring, Low-Power Environmental Sensor, Secure Authentication Controller, Compact Control and Signal Generator, Battery-Powered Remote Monitoring.

🧩

Secure IoT Sensor Endpoint

The ATSAML11D14A-YF fits secure IoT sensor endpoints that require authenticated connectivity and low standby consumption. Its 32 MHz Arm Cortex-M23 core handles protocol tasks and sensor control, while TrustZone-M, secure key storage, crypto hardware, and tamper resistance protect credentials and firmware boundaries. The 16 KB flash and 8 KB SRAM suit compact constrained firmware rather than complex edge-AI workloads. Active current below 25 uA/MHz and sleep current below 100 nA support duty-cycled operation. Use the integrated ADC for analog sensing and SERCOM for serial sensor or communications links. Before schematic capture, confirm the selected radio interface, pin multiplexing, device-unique key workflow, and low-power wake behavior against the manufacturer documentation.

🏭

Industrial Condition Monitoring

The ATSAML11D14A-YF is appropriate for industrial condition-monitoring modules that sample sensors, evaluate thresholds, and report events without a large host processor. The 32-bit Cortex-M23 architecture supports deterministic interrupt handling, while the integrated 12-bit ADC, DAC, op amp, and analog comparator reduce the analog front-end footprint. Firmware can wake from sleep for periodic measurements, exploit less than 100 nA sleep consumption, and use less than 25 uA/MHz during processing. SERCOM provides a flexible path to digital sensors or field-bus transceivers. Design the analog front end around the manufacturer’s ADC reference and input recommendations, provide filtering appropriate to the sensor bandwidth, and isolate high-energy motor or relay nodes to prevent conducted noise from corrupting measurements.

🌐

Low-Power Environmental Sensor

The ATSAML11D14A-YF supports compact environmental sensors that combine analog measurement, local thresholding, and secure data handling. Its integrated ADC accepts sensor outputs, while the DAC and op amp can support excitation, compensation, or local test functions. The Cortex-M23 core can execute filtering and calibration without a separate processor, and the 16 KB flash provides room for application firmware and configuration data. For battery-powered operation, keep the MCU in sleep between measurements and use a peripheral event to trigger conversions; the manufacturer reports sleep current below 100 nA and active current below 25 uA/MHz. Select external passive components and reference circuitry for the required accuracy, and verify ADC noise, input impedance, and sampling time before final calibration.

🔒

Secure Authentication Controller

The ATSAML11D14A-YF can serve as a compact authentication controller for connected accessories, equipment nodes, and access-control products. TrustZone-M separates trusted security code from application code, while secure key storage, crypto hardware, and tamper resistance improve protection of credentials compared with a software-only implementation. The 32 MHz Cortex-M23 core is sufficient for challenge-response protocols, key derivation, policy checks, and serial command handling, and 2 KB EEPROM can retain configuration parameters. Keep the firmware update path authenticated and validate the device’s tamper-detection behavior in the final enclosure. The 24-SSOP footprint also supports designs that prefer accessible leads, although the security boundary ultimately depends on correct key provisioning, startup configuration, and physical package handling.

⚡

Compact Control and Signal Generator

The ATSAML11D14A-YF is suitable for compact control and signal-generation products where an MCU, ADC, DAC, op amp, and comparator can share one package. A product can acquire a control or sensor signal through the ADC, calculate an adjustment in the Cortex-M23 core, and drive a reference waveform through the DAC. The 32 MHz processing rate supports responsive control loops, while TrustZone-M can isolate safety- or security-sensitive routines from ordinary application code. SERCOM channels permit connection to display, communications, or storage devices without consuming separate serial-interface controllers. Verify DAC output range, ADC reference behavior, comparator thresholds, and pin-mux alternatives in the manufacturer documentation. Keep analog routing away from fast digital edges and provide local decoupling at every supply pin.

📱

Battery-Powered Remote Monitoring

The ATSAML11D14A-YF fits battery-powered remote-monitoring devices that periodically acquire information and transmit it through a low-power serial link. Its Cortex-M23 core handles scheduling and data preparation, and the SERCOM peripherals support integration with a communications module without requiring a dedicated protocol controller. Low sleep current below 100 nA is valuable when the radio remains the dominant load, while active current below 25 uA/MHz helps control the processing portion of each wake cycle. The integrated ADC can directly monitor a sensor or battery-divider signal, but its voltage range and accuracy must match the application. Use a regulator with suitable quiescent current, add decoupling close to the supply pins, and validate battery-life estimates with the actual radio duty cycle rather than microcontroller current alone.

What is ATSAML11D14A-YF?
The ATSAML11D14A-YF is a 32-bit Arm Cortex-M23 microcontroller from Microchip Technology with a 32 MHz maximum clock, 16 KB flash, 8 KB SRAM, and 2 KB EEPROM. According to the Microchip product page, it integrates TrustZone-M security, secure key storage, crypto support, tamper resistance, SERCOM, ADC, DAC, op amp, and analog-comparison resources in a 24-SSOP package. It is intended for compact embedded, IoT, sensing, and secure-control applications.
What are the key specifications of ATSAML11D14A-YF that engineers should know?
The ATSAML11D14A-YF combines a 32 MHz Arm Cortex-M23 core with 16 KB flash, 8 KB SRAM, and 2 KB EEPROM. According to the Microchip product page, active consumption is below 25 uA/MHz and sleep consumption is below 100 nA. The device also provides TrustZone-M, secure key storage, crypto hardware, tamper resistance, SERCOM interfaces, a 12-bit ADC, DAC, op amp, and analog comparator in a 24-SSOP package.
Where can I download the ATSAML11D14A-YF datasheet PDF?
The official ATSAML11D14A datasheet is available through the Microchip ATSAML11D14A product page at https://www.microchip.com/en-us/product/ATSAML11D14A. Use the manufacturer document for the authoritative pin-description table, electrical limits, clock configuration, memory map, peripheral details, and recommended application circuits. The -YF order code identifies the 24-SSOP configuration, so confirm that the document package drawings match the PCB footprint before release.
Where can I find the ATSAML11D14A-YF pinout?
Use the pin-description table in the Microchip ATSAML11D14A manufacturer datasheet to assign PCB tracks for ATSAML11D14A-YF. The component uses a 24-SSOP package with numbered external leads and an exposed ground connection defined by the package drawing. Preserve access to programming, reset, supply, and ground pins, and follow the package drawing for lead pitch, span, and land pattern rather than relying on a generic SSOP footprint.
Is ATSAML11D14A-YF suitable for low-power IoT devices?
Yes, the ATSAML11D14A-YF is suitable for low-power IoT devices because its manufacturer reports less than 25 uA/MHz in active mode and less than 100 nA in sleep mode. The 32 MHz Cortex-M23 core supports responsive event handling, while 16 KB flash and 8 KB SRAM suit compact firmware. Security functions including TrustZone-M, secure key storage, crypto, and tamper resistance also support connected products that require protected credentials.
What security features does ATSAML11D14A-YF provide?
The ATSAML11D14A-YF provides Arm TrustZone-M, secure key storage, crypto hardware, and chip-level tamper resistance. According to the Microchip product page, these features are designed for secure embedded control without relying exclusively on software-protected secrets. TrustZone-M can isolate security-critical code and data, while hardware-backed key storage and cryptographic resources reduce the exposure of credentials when the device handles authentication or secure firmware services.
What is the difference between ATSAML11D14A-YF and ATSAML11D14A-YU?
Both ATSAML11D14A-YF and ATSAML11D14A-YU are listed as 32 MHz Cortex-M23 microcontrollers with 16 KB flash, 8 KB SRAM, TrustZone-M, crypto, SERCOM, ADC, DAC, op amp, and analog-comparison features. The ordering-option difference requires confirmation against the package and temperature tables in the manufacturer documentation. Verify the exact lead package, temperature grade, and marking before treating either order code as a substitution.
When should I choose ATSAML11D14A-YF over another SAM L11 device?
Choose ATSAML11D14A-YF when the design needs a 24-SSOP Cortex-M23 device with 16 KB flash, 8 KB SRAM, 2 KB EEPROM, TrustZone-M, and the integrated analog and serial peripheral set. A larger-flash SAM L11 option may be preferable when firmware growth exceeds 16 KB, while another package may be preferable for denser boards. The choice should be based on memory demand, package availability, qualification, and verified pin compatibility rather than feature similarity alone.
Is ATSAML11D14A-YF suitable for analog measurement and control applications?
Yes, the ATSAML11D14A-YF is suitable for analog measurement and control because it integrates an ADC, DAC, op amp, and analog-comparison resources. The 32 MHz Cortex-M23 core can acquire samples and execute control logic, while SERCOM provides flexible serial connectivity. Verify analog input limits, reference selection, sampling behavior, and peripheral pin multiplexing in the manufacturer datasheet before finalizing sensor or actuator interfaces.
What is the best drop-in replacement for ATSAML11D14A-YF?
The closest same-family drop-in candidate is ATSAML11D14A-YU because its published core, memory, clock, security, and peripheral characteristics match the ATSAML11D14A-YF. ATSAML11D14A-YFT is another same-package ordering option, but its temperature-grade details must be confirmed. No cross-brand 24-SSOP Cortex-M23 replacement with verified pin compatibility was identified, so do not substitute an MCU based only on flash size and clock frequency.
Can ATSAML11D14A-YU replace ATSAML11D14A-YF on the same PCB?
The ATSAML11D14A-YU can be considered for replacement because it is listed with the same 32 MHz Cortex-M23 core, 16 KB flash, 8 KB SRAM, security features, and integrated peripherals as the ATSAML11D14A-YF. Before installing it, verify that both order codes use the same 24-SSOP footprint and confirm the operating-temperature range. Firmware should also be checked for any ordering-code-dependent configuration.
Where can I buy ATSAML11D14A-YF online?
Use the Request a Quote form on this XAIPART product page to ask for ATSAML11D14A-YF availability, order quantity, and current commercial terms. Include your required package form, quantity, target date, and any production or traceability requirements. The part is identified as a 24-SSOP, 32 MHz Cortex-M23 device with 16 KB flash and 8 KB SRAM, allowing the distributor to confirm the exact suffix before quotation.
What is the current lead time for ATSAML11D14A-YF?
Current lead time for ATSAML11D14A-YF should be requested through the Request a Quote form on this page. Include the required quantity, scheduled production date, and whether the order must use a specific shipping form. Because lead time depends on inventory, order size, and manufacturing commitments, use the response as the basis for schedule planning rather than assuming availability from a product listing.
Is ATSAML11D14A-YF in stock?
Inventory for ATSAML11D14A-YF is confirmed through the Request a Quote form on this page. State the required quantity, reel or tray packaging preference, delivery location, and target date so the quotation can reflect the exact ATSAML11D14A-YF order code. Engineers should also obtain a manufacturer-backed date code and traceability requirements before placing a production order.
What is the price of ATSAML11D14A-YF?
The current commercial price for ATSAML11D14A-YF is obtained through the Request a Quote form on this page. Provide the intended order quantity and packaging preference so the response reflects the exact 24-SSOP order code and required volume. The component specification used for quotation includes a 32 MHz Cortex-M23 core, 16 KB flash, 8 KB SRAM, 2 KB EEPROM, and integrated TrustZone-M security.
How do ATSAML11D14A-YF and ATSAML11D15A-YF differ?
The principal published difference is flash capacity: ATSAML11D14A-YF has 16 KB flash, while ATSAML11D15A-YF is a higher-density member of the same ATSAML11 family. Both use the 24-SSOP configuration and the same 32 MHz Cortex-M23 architecture. The D15 device provides 8 KB more flash, a 50% increase, so confirm memory requirements and the manufacturer pin table before treating it as a drop-in replacement.

엔지니어링 참조 데이터: ATSAML11D14A-YF — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose ATSAML11D14A-YF for a compact 24-SSOP product that needs a 32 MHz Arm Cortex-M23 core, 16 KB flash, 8 KB SRAM, and integrated security for connected or credential-handling applications. Its TrustZone-M, secure key storage, crypto hardware, tamper resistance, ADC, DAC, op amp, and SERCOM resources make it particularly suitable for small security-aware IoT and industrial monitoring designs. ATSAML11D14A-YU is the closest candidate when an alternate manufacturer ordering option is needed, but confirm the package and temperature grade. ATSAML11D14A-YFT should be selected only when its temperature range matches the deployment environment. ATSAML11D15A-YF provides 8 KB more flash and may help when firmware growth exceeds the D14 device’s 16 KB capacity, but that 50% memory increase requires a separate compatibility review. No cross-brand drop-in alternative is recommended without verified 24-SSOP pin equivalence.

대체품과의 비교

파라미터 이 제품 ATSAML11D14A-YU ATSAML11D14A-YFT ATSAML11D15A-YF
Package 24-SSOP 24-SSOP 24-SSOP 24-SSOP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Processor Core ARM Cortex-M23 ARM Cortex-M23 ARM Cortex-M23 ARM Cortex-M23
Maximum Clock Frequency 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 16 KB 16 KB 16 KB 24 KB (+50%)
SRAM 8 KB 8 KB 8 KB 8 KB

주요 차별점

  • Combines Cortex-M23 processing with chip-level security (vs ATSAML11D14A-YU)
  • Low-power operation for duty-cycled embedded designs (vs ATSAML11D15A-YF)
  • Integration reduces discrete analog support (vs ATSAML11D14A-YFT)

설계 노트

Assign the ATSAML11D14A-YF footprint from the 24-SSOP package drawing in the Microchip manufacturer datasheet, including lead pitch, row span, solder-mask clearance, and paste-land dimensions. Confirm that every power, ground, reset, programming, and peripheral signal lead remains accessible. Do not reuse a generic 24-SSOP footprint without checking the exact package width and lead geometry.

Place the required bypass capacitors directly between the appropriate supply and ground pins, using the shortest possible traces. Follow the manufacturer’s recommended capacitance, voltage rating, and dielectric requirements. For battery-powered systems, calculate the regulator’s quiescent current together with active and sleep consumption; the MCU’s below-25-uA/MHz active figure and below-100-nA sleep figure do not include external regulator or radio losses.

Separate analog inputs associated with the ADC from fast SERCOM, switching-regulator, and digital clock routes. Use a continuous ground reference, avoid routing sensitive inputs beneath digital or power-regulator nodes, and place analog filtering close to the source. The integrated op amp and comparator require layout that minimizes parasitic capacitance and keeps high-current returns from sharing sensitive return paths.

Do not select an ATSAML11 replacement from the base device name alone. Verify the package, temperature grade, flash capacity, pin multiplexing, security features, and firmware configuration for every order code. ATSAML11D14A-YU and ATSAML11D14A-YFT appear closely matched, but their temperature specifications must be confirmed. ATSAML11D15A-YF adds 8 KB of flash and should be treated as a different memory configuration until compatibility is established.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The ATSAML11D14A-YF product and distributor records do not state the requested compliance classifications. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status with the manufacturer before qualification.

데이터 검증일: 2026-11-20 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

ATSAML11D14A-YF datasheet ATSAML11D14A-YF specifications ATSAML11D14A-YF pinout ATSAML11D14A-YF package ATSAML11D14A-YF equivalent ATSAML11D14A-YF replacement ATSAML11D14A-YF price ATSAML11D14A-YF stock Microchip ATSAML11D14A-YF ATSAML11D14A-YF vs ATSAML11D15A-YF 24-SSOP Cortex-M23 microcontroller ATSAML11D14A-YF TrustZone-M

관련 부품 & 용어

Microchip Technology ATSAML11D14A-YF ATSAML11D14A-YU ATSAML11D14A-YFT ATSAML11D15A-YF Arm Cortex-M23 microcontroller embedded processor semiconductor 32-bit architecture TrustZone-M secure key storage crypto hardware tamper resistance SERCOM ADC DAC operational amplifier analog comparator 24-SSOP SSOP family surface mount SMD IoT industrial condition monitoring
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기