ATSAMS70J21A-AN - 300MHz Cortex-M7 2MB MCU | Microchip
부품 번호: ATSAMS70J21A-AN ✓ 활성ATSAMS70J21A-AN 개요
A flash microcontroller integrates a processor core, nonvolatile program memory, SRAM, peripherals, and communication interfaces on one device. The ARM Cortex-M7 architecture belongs to the embedded MCU hierarchy and provides deterministic instruction execution with hardware floating-point support. This makes the SAM S70 family suitable when a design must combine real-time control, signal processing, graphics support, and connected peripherals without relying on an external processor or memory.
The principal device characteristics are a 300 MHz maximum operating frequency, 2 MB Flash, 384 KB SRAM, 32-bit processing, and a 64-LQFP package. The large code-memory capacity allows substantial application firmware, protocol stacks, and data tables to reside locally, while the 384 KB SRAM supports working buffers for audio, communications, control, and image or graph processing workloads. The floating-point unit accelerates suitable arithmetic without requiring software emulation.
The S70 architecture combines high-performance Cortex-M7 execution with an extensive peripheral set for embedded control. Its cache-based architecture is intended to improve execution efficiency when application code and working data are accessed repeatedly. Engineers can use the MCU for deterministic control loops, communications gateways, industrial equipment, and human-machine interfaces where response time and local integration are important. SEGGER J-Link support is documented for the ATSAMS70J21A device family, which assists with debugging and programming workflows.
Typical uses include industrial automation, connected control equipment, audio and signal-processing modules, network-attached industrial gateways, and compact user-interface systems. The 2 MB Flash capacity is particularly useful for firmware that includes networking stacks, update mechanisms, diagnostics, and real-time control code. The 384 KB SRAM also reduces the need to access external memory during normal operation, although designers must still check peripheral and electrical requirements in the manufacturer datasheet.
Layout planning is critical because this device combines a 300 MHz processor with numerous multiplexed pins in a 10 mm by 10 mm LQFP. Place decoupling capacitors close to the supply pins, route high-speed signals away from noisy switching nodes, and observe the recommended external-component and layout guidance. Confirm the complete pin multiplexing table before assigning board functions because many peripheral signals share pins.
This page consolidates the confirmed processor, memory, frequency, package, sourcing, tool-support, and replacement information into an engineering-focused guide. It also identifies where a complete electrical characterization, pin assignment, or drop-in alternative must be confirmed against the Microchip documentation before a design is released.
드롭인 대체품: ATSAMS70J21A-AN — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ATSAMS70J21A-AN (동일 폼 팩터 및 풋프린트) — 차이점: Package.
ATSAME70J21A-AN
✅ 드롭인가격 문의
데이터시트 보기 →ATSAMS70J21A-AN 최대 정격 & 전기적 특성
| Product Type | 32-bit ARM Cortex-M7 flash microcontroller |
| Processor Core | ARM Cortex-M7 with Floating Point Unit |
| Maximum CPU Frequency | 300 MHz |
| Bit Width | 32 bit |
| Flash Memory | 2 MB (2M x 8) |
| SRAM | 384 KB |
| 패키지 | 64-LQFP (10 mm x 10 mm) |
| 핀 수 | 64 pins |
| 실장 유형 | Surface mount |
| Floating Point Unit | Yes |
| Microcontroller Family | Microchip SAM S70 |
| Debug and Programming Support | SEGGER J-Link supported for ATSAMS70J21A |
ATSAMS70J21A-AN 64-lqfp (10 mm x 10 mm) 핀 구성 가이드
ATSAMS70J21A-AN(64-lqfp (10 mm x 10 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: ATSAMS70J21A-AN.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ATSAMS70J21A-AN 적합 용도: 6 애플리케이션s: Industrial Automation Controller, Connected Industrial Gateway, Real-Time Signal Processing Module, Audio and Communications Controller, Embedded User Interface Controller, Programmable Logic Controller.
Industrial Automation Controller
The ATSAMS70J21A-AN fits industrial automation controllers that combine deterministic control with communications and data logging. Its ARM Cortex-M7 core operates up to 300 MHz and includes a Floating Point Unit, while 2 MB of Flash can hold control firmware, protocol stacks, diagnostics, and configuration data. The 384 KB SRAM supports working buffers without requiring external RAM during normal operation. In this role, the device would manage sensor acquisition, actuator sequencing, and communication tasks while the 64-LQFP package keeps the design compact. Validate the specified voltage and temperature limits, communication peripherals, and industrial qualification requirements against the finished system before production release.
추천
Connected Industrial Gateway
The ATSAMS70J21A-AN is suitable for a connected industrial gateway that must aggregate local control data while running network and protocol firmware. Its 300 MHz Cortex-M7 processor provides substantial compute capacity, and the 2 MB Flash allows networking stacks, security code, diagnostics, and device-management logic to be integrated on one device. The 384 KB SRAM provides space for packet buffers and protocol state without making external memory mandatory. A gateway implementation can place the MCU between field interfaces and an upstream Ethernet or serial backbone. Review the selected SAME70 or S70 variant for the exact Ethernet, USB, security, and memory peripherals required, and preserve the manufacturer's recommended pin multiplexing and decoupling layout.
추천
Real-Time Signal Processing Module
The ATSAMS70J21A-AN fits real-time signal-processing modules where deterministic execution, numerical calculations, and local connectivity are important. The 300 MHz ARM Cortex-M7 core includes a Floating Point Unit for efficient arithmetic in filtering, control, and sensor-processing algorithms. Its 2 MB Flash can retain application code, coefficient tables, and update images, while 384 KB of SRAM supports sample buffers and working state. The MCU can execute acquisition and processing tasks concurrently with communication and supervisory functions. Confirm the required peripheral mix, sampling resources, clocking configuration, and interrupt latency for the target design. For production, use the complete manufacturer electrical specification to establish supply tolerances, decoupling, and operating-environment limits.
추천
Audio and Communications Controller
The ATSAMS70J21A-AN can serve as the central controller in an audio or communications module that requires more memory and processing capability than a small entry-level MCU. The 300 MHz Cortex-M7 processor handles real-time protocol tasks, and its Floating Point Unit supports common audio and control calculations. The 2 MB Flash is useful for retaining codec configuration, communication firmware, and update logic, while the 384 KB SRAM accommodates frame buffers. Its 64-LQFP package provides a broad set of pins for serial interfaces, control signals, clocks, and external peripherals. Verify the exact communication peripherals, audio interfaces, timing requirements, and package pin assignments before schematic capture, particularly if the design depends on a particular SAME70 or S70 feature set.
추천
Embedded User Interface Controller
The ATSAMS70J21A-AN is appropriate for an embedded user-interface controller that coordinates display updates, touch or keypad input, indicators, and application logic. Its 300 MHz ARM Cortex-M7 core can service graphical or instrument-panel workloads alongside real-time control functions. With 2 MB of Flash, the device can store interface firmware, fonts, lookup tables, and communication protocols, while 384 KB of SRAM provides working space for display and input handling. The 64-LQFP package offers enough external connections for display interfaces, serial peripherals, and control outputs. Confirm the exact display and touch peripherals, pin multiplexing, and electrical levels used by the module. Keep high-speed display or communication routing separated from sensitive analog circuitry and follow the recommended grounding scheme.
추천
Programmable Logic Controller
The ATSAMS70J21A-AN can support compact programmable logic controller platforms that process inputs, coordinate outputs, and expose local diagnostics. The high-performance 300 MHz Cortex-M7 core provides headroom for communication tasks alongside deterministic control loops. Its 2 MB Flash is valuable for storing ladder-runtime or embedded-control software, parameter sets, and communications protocols, while the 384 KB SRAM supports task state and data buffers. The 64-LQFP package permits a reasonably dense pin assignment for digital I/O, isolated communications, analog interfaces, and status indicators. Before using the MCU in a safety-related or regulated installation, verify the operating temperature, supply range, peripheral coverage, and any certification obligations. Do not infer functional safety or industrial certification solely from processor performance.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATSAMS70J21A-AN — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ATSAME70J21A-AN |
|---|---|---|
| Package | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) |
| Brand | Microchip Technology | Microchip Technology |
| Processor Core | 32-bit ARM Cortex-M7 with Floating Point Unit | 32-bit ARM Cortex-M7 with Floating Point Unit |
| Maximum CPU Frequency | 300 MHz | 300 MHz |
| Flash Memory | 2 MB | 2 MB |
| SRAM | 384 KB | 384 KB |
| Pin Count | 64 pins | 64 pins |
| Floating Point Unit | Yes | Yes |
주요 차별점
- Confirmed package and core match for PCB-compatible substitution (vs ATSAME70J21A-AN)
- Substantial local memory for control firmware and working data (vs ATSAME70J21A-AN)
- Broad pin access in a compact surface-mount footprint (vs ATSAMS70J21A-MN)
설계 노트
Treat the 300 MHz Cortex-M7 core as a high-speed signal-integrity design. Place the required input, output, and internal supply bypass capacitors directly adjacent to the relevant device pins using the shortest possible ground-return paths. Route high-speed clock and communication traces away from switching power-converter nodes. The 10 mm by 10 mm LQFP footprint is compact, so fanout planning and assembly clearances should be completed before the board is released for fabrication.
Assign every external signal from the manufacturer pin-multiplexing table rather than assuming that equivalent S70 and SAME70 functions are automatically interchangeable. The ATSAME70J21A-AN matches the target's confirmed 300 MHz, 2 MB Flash, 384 KB SRAM, and 64-LQFP ratings, but product-specific peripherals may still differ. Check startup, reset, debug, clock, and communication assignments after any substitution so the PCB remains mechanically compatible without introducing a functional mismatch.
Do not design from headline CPU and memory specifications alone. Confirm operating voltage, temperature grade, clock limits, I/O characteristics, and all required peripherals in the exact manufacturer documentation for ATSAMS70J21A-AN. Also verify the programming interface and boot configuration before schematic completion. Using the ATSAMS70J21A-MN part as a circuit reference is useful for peripheral planning, but its 64-QFN package is not a physical substitute for the target's 64-LQFP footprint.
Design the supply network for both high processing demand and multiple switched I/O loads. Use the manufacturer's recommended voltage range and decoupling topology, and keep analog or communication supply paths free from unnecessary switching-node coupling. Avoid adding unsupported capacitor values or extra bulk capacitance directly to sensitive supply pins unless the reference design and stability requirements support it. Validate startup sequencing, load transients, and regulator headroom across the intended operating temperature.
규정 준수 정보
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for the exact ordering code.