CD4018BF/3 - 10MHz CMOS Counter | Harris | Signal Processing
부품 번호: CD4018BF/3 ✗ 단종CD4018BF/3 개요
A CMOS presettable counter is a sequential logic circuit within the broader digital counter, divider, and counter/diverter categories. It advances its count when driven by a clock edge and can be loaded with an initial count through its parallel data inputs. The preset capability makes the device useful when a circuit must begin counting from a selected value, while the decode outputs provide access to selected counter states.
The CD4018BF/3 supports medium-speed operation and fully static operation, allowing the internal state to remain stable when no clock transition occurs. Standardized symmetrical output characteristics help simplify interfacing with other CMOS logic. Its parametric ratings at 5 V, 10 V, and 15 V permit design engineers to evaluate the same counter across several common supply levels rather than relying on one operating point.
The part uses positive-rail, single-supply CMOS technology, placing it in the CD4000 logic family. Its 16-lead hermetic ceramic dual-in-line package supports conventional through-hole assembly and provides a durable environmental enclosure for industrial, instrumentation, and legacy control applications. The suffix /3 identifies the particular Harris ordering variant, while the CD4018B designation identifies the counter family.
Typical uses include frequency division, event-counting, timing and delay generation, programmable sequence controllers, digital instrumentation, and industrial control logic. The divide-by-N capability is useful when a system needs a stable lower-frequency output derived from an external clock. Its preset inputs can also support modulo counting and repetitive timing sequences when the surrounding combinational logic defines the terminal count.
Designers should account for supply tolerances, propagation delay, clock pulse width, reset behavior, and the settling time of the preset inputs when establishing operating-frequency limits. Input levels must remain compatible with the selected CMOS supply range, and unused inputs should be tied to a defined logic level. The manufacturer datasheet should be used for the complete terminal description and timing characteristics before assigning nets in a new layout.
This product page combines the verified CD4018BF/3 identity, manufacturer-package information, operating-speed data, design guidance, and engineering-oriented comparison context. It also distinguishes the ceramic CDIP variant from lower-pin-count or surface-mount CD4018-family alternatives that cannot replace the target part without changing the printed-circuit-board footprint.
드롭인 대체품: CD4018BF/3 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청CD4018BF/3 최대 정격 & 전기적 특성
| Product Type | CMOS presettable binary counter and divide-by-N circuit |
| Technology | CMOS |
| Maximum Operating Frequency | 10 MHz typical at a 10 V supply |
| Fully Static Operation | Yes |
| Quiescent Current Test Condition | 20 V test condition |
| Maximum Input Current | 1 µA at 18 V |
| Parametric Supply Rating | 5 V |
| Parametric Supply Rating | 10 V |
| Parametric Supply Rating | 15 V |
| Output Characteristics | Standardized and symmetrical |
| 패키지 | 16-lead hermetic ceramic dual-in-line package |
| Number of Leads | 16 leads |
| 실장 유형 | Through-hole |
| 동작 온도 범위 | -55 °C to +125 °C |
| Counter Resolution | 5-bit |
CD4018BF/3 16-lead hermetic ceramic dual-in-line package 핀 구성 가이드
CD4018BF/3(16-lead hermetic ceramic dual-in-line package 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: CD4018BF/3.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
CD4018BF/3 적합 용도: 6 애플리케이션s: Frequency Division, Event and Pulse Counting, Programmable Timing Control, Digital Instrumentation, Industrial Sequence Control, Modulo Counter and Retriggerable Timer.
Frequency Division
The CD4018BF/3 fits frequency-divider designs that derive a lower periodic signal from an external clock. Its counter and divide-by-N architecture permits the divide ratio to be established through the preset and data connections, while the 10 MHz typical operating point at 10 V provides useful margin for moderate clock rates. The fully static CMOS implementation also avoids unnecessary state changes when the clock remains idle. In implementation, the designer must verify clock pulse width, propagation delay, feedback-loop timing, and the settling behavior of the preset inputs against the required output accuracy.
추천
Event and Pulse Counting
CD4018BF/3 is appropriate for counting discrete events such as sensor pulses, machine movements, or timed production steps. The binary counter state can be observed through its decode outputs, and the preset capability allows a cycle to begin from a selected count instead of zero. Its medium-speed operation, with a typical 10 MHz maximum at a 10 V supply, is substantially faster than many mechanical-contact applications require. Designers should still account for switch bounce, input conditioning, reset timing, and the maximum tolerated event rate when interpreting the counter output.
추천
Programmable Timing Control
The CD4018BF/3 can act as the timing core in programmable delay and repetitive-sequence circuits. Preset values establish the starting count, while external decode and feedback logic can detect a terminal count and restart or gate the timing cycle. Its 5 V, 10 V, and 15 V parametric ratings support several industrial logic environments, and fully static operation maintains a stable count when the clock is stopped. Accurate timing requires checking propagation delay, clock pulse width, preset and reset recovery intervals, and the behavior of any external feedback combinational logic.
추천
Digital Instrumentation
CD4018BF/3 suits digital instrumentation that must count samples, events, or timing intervals and present a decoded state. The 16-lead hermetic ceramic dual-in-line package is appropriate for through-hole instrument construction and provides a -55 °C to +125 °C rated operating range. The counter’s preset inputs can support calibration or selectable measurement intervals, while its outputs can drive display-control or status logic. Because this is a legacy CMOS counter, engineers should validate noise margins, clock-source edge quality, supply bypass behavior, and state transitions across the complete voltage and temperature range.
추천
Industrial Sequence Control
The CD4018BF/3 can support legacy industrial sequence-control systems where a repeatable count drives discrete process steps. Its fully static operation preserves the count between clock events, and the preset function allows different sequence lengths without rebuilding the counter hardware. The through-hole CDIP-16 package facilitates repair and replacement in older control equipment. Integration requires careful inspection of reset priority, preset loading, unused-input states, and recovery timing. Designers should also confirm that the supply rail and all connected logic operate at compatible CMOS levels to prevent false clocking or incomplete count transitions.
추천
Modulo Counter and Retriggerable Timer
CD4018BF/3 is useful in modulo-count and retriggerable-timer arrangements because the preset function permits a defined count range while external logic detects and reloads the terminal state. Its medium-speed operation supports clock sources significantly faster than typical industrial timing intervals, and its single-supply CMOS construction simplifies integration with 5 V, 10 V, or 15 V logic systems. To obtain repeatable timing, the feedback path must not introduce race conditions, and clock, reset, and preset recovery times must be respected. Pull-up or pull-down treatment of unused inputs is also necessary for deterministic operation.
추천
추천 제품 요약
엔지니어링 참조 데이터: CD4018BF/3 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Package | 16-lead hermetic ceramic dual-in-line package |
| Brand | Harris Corporation |
| Product Type | CMOS presettable binary counter and divide-by-N circuit |
| Logic Family | CD4000-series CMOS |
| Maximum Operating Frequency | 10 MHz typical at 10 V |
| Parametric Supply Ratings | 5 V, 10 V, and 15 V |
| Maximum Input Current | 1 µA at 18 V |
| Operating Temperature Range | -55 °C to +125 °C |
| Fully Static Operation | Yes |
| Lead Count | 16 leads |
주요 차별점
- Matches the original CD4018B counter function in a hermetic ceramic CDIP package (vs CD4018BM)
- Supports medium-speed counting at a 10 V supply (vs CD4018BF)
- Provides a defined set of operating and environmental ratings (vs CD4018B types with unspecified ordering suffix)
설계 노트
Treat clock, reset, and preset signals as a coordinated timing system. Check the manufacturer’s clock-pulse-width and recovery-time diagrams before choosing a feedback network, and ensure that preset data is stable before the active clock edge. A decoded terminal count must not create a combinational feedback path that retriggers or advances the counter more than once per intended cycle.
Use the manufacturer’s 16-lead CDIP pin orientation and preserve adequate clearance between adjacent ceramic-package leads. Place any local supply bypass close to the device’s power and ground connections, and route clock and reset traces away from noisy switching nodes. A conventional through-hole footprint is required; SOIC and TSSOP CD4018-family devices are not footprint-compatible with the target.
Operate the counter from a supply compatible with its 5 V, 10 V, and 15 V parametric ratings. Input levels must not exceed the limits for the selected supply because excessive input voltage can damage the input structures, while undershoot can create unintended clocking. Verify the absolute maximum input and supply ratings in the manufacturer datasheet before connecting external signals.
Keep the external clock source clean and use the shortest practical routing path for high-rate operation. Although the device is fully static when the clock is inactive, slow or noisy edges can create multiple transitions inside the switching window. Confirm that the source amplitude, rise and fall characteristics, and return path satisfy the voltage and timing requirements of the selected supply.
규정 준수 정보
The component is a legacy Harris Corporation 16-CDIP counter. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established from the cited manufacturer-family information and must be confirmed for the exact ordering variant.