CD4018BF/3 - 10MHz CMOS Counter | Harris | Signal Processing
MPN: CD4018BF/3 ✗ End of LifeCD4018BF/3 Overview
A CMOS presettable counter is a sequential logic circuit within the broader digital counter, divider, and counter/diverter categories. It advances its count when driven by a clock edge and can be loaded with an initial count through its parallel data inputs. The preset capability makes the device useful when a circuit must begin counting from a selected value, while the decode outputs provide access to selected counter states.
The CD4018BF/3 supports medium-speed operation and fully static operation, allowing the internal state to remain stable when no clock transition occurs. Standardized symmetrical output characteristics help simplify interfacing with other CMOS logic. Its parametric ratings at 5 V, 10 V, and 15 V permit design engineers to evaluate the same counter across several common supply levels rather than relying on one operating point.
The part uses positive-rail, single-supply CMOS technology, placing it in the CD4000 logic family. Its 16-lead hermetic ceramic dual-in-line package supports conventional through-hole assembly and provides a durable environmental enclosure for industrial, instrumentation, and legacy control applications. The suffix /3 identifies the particular Harris ordering variant, while the CD4018B designation identifies the counter family.
Typical uses include frequency division, event-counting, timing and delay generation, programmable sequence controllers, digital instrumentation, and industrial control logic. The divide-by-N capability is useful when a system needs a stable lower-frequency output derived from an external clock. Its preset inputs can also support modulo counting and repetitive timing sequences when the surrounding combinational logic defines the terminal count.
Designers should account for supply tolerances, propagation delay, clock pulse width, reset behavior, and the settling time of the preset inputs when establishing operating-frequency limits. Input levels must remain compatible with the selected CMOS supply range, and unused inputs should be tied to a defined logic level. The manufacturer datasheet should be used for the complete terminal description and timing characteristics before assigning nets in a new layout.
This product page combines the verified CD4018BF/3 identity, manufacturer-package information, operating-speed data, design guidance, and engineering-oriented comparison context. It also distinguishes the ceramic CDIP variant from lower-pin-count or surface-mount CD4018-family alternatives that cannot replace the target part without changing the printed-circuit-board footprint.
Drop-in alternatives for CD4018BF/3 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
No drop-in alternatives available for this product.
Request AlternativesCD4018BF/3 Maximum Ratings & Electrical Characteristics
| Product Type | CMOS presettable binary counter and divide-by-N circuit |
| Technology | CMOS |
| Maximum Operating Frequency | 10 MHz typical at a 10 V supply |
| Fully Static Operation | Yes |
| Quiescent Current Test Condition | 20 V test condition |
| Maximum Input Current | 1 µA at 18 V |
| Parametric Supply Rating | 5 V |
| Parametric Supply Rating | 10 V |
| Parametric Supply Rating | 15 V |
| Output Characteristics | Standardized and symmetrical |
| Package | 16-lead hermetic ceramic dual-in-line package |
| Number of Leads | 16 leads |
| Mounting Type | Through-hole |
| Operating Temperature Range | -55 °C to +125 °C |
| Counter Resolution | 5-bit |
CD4018BF/3 16-lead hermetic ceramic dual-in-line package Pin Configuration Guide
Pin configuration for CD4018BF/3 (16-lead hermetic ceramic dual-in-line package package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for CD4018BF/3.
Refer to the datasheet for full pin configuration.
Typical Applications
CD4018BF/3 is suitable for 6 applications: Frequency Division, Event and Pulse Counting, Programmable Timing Control, Digital Instrumentation, Industrial Sequence Control, Modulo Counter and Retriggerable Timer.
Frequency Division
The CD4018BF/3 fits frequency-divider designs that derive a lower periodic signal from an external clock. Its counter and divide-by-N architecture permits the divide ratio to be established through the preset and data connections, while the 10 MHz typical operating point at 10 V provides useful margin for moderate clock rates. The fully static CMOS implementation also avoids unnecessary state changes when the clock remains idle. In implementation, the designer must verify clock pulse width, propagation delay, feedback-loop timing, and the settling behavior of the preset inputs against the required output accuracy.
Recommended
Event and Pulse Counting
CD4018BF/3 is appropriate for counting discrete events such as sensor pulses, machine movements, or timed production steps. The binary counter state can be observed through its decode outputs, and the preset capability allows a cycle to begin from a selected count instead of zero. Its medium-speed operation, with a typical 10 MHz maximum at a 10 V supply, is substantially faster than many mechanical-contact applications require. Designers should still account for switch bounce, input conditioning, reset timing, and the maximum tolerated event rate when interpreting the counter output.
Recommended
Programmable Timing Control
The CD4018BF/3 can act as the timing core in programmable delay and repetitive-sequence circuits. Preset values establish the starting count, while external decode and feedback logic can detect a terminal count and restart or gate the timing cycle. Its 5 V, 10 V, and 15 V parametric ratings support several industrial logic environments, and fully static operation maintains a stable count when the clock is stopped. Accurate timing requires checking propagation delay, clock pulse width, preset and reset recovery intervals, and the behavior of any external feedback combinational logic.
Recommended
Digital Instrumentation
CD4018BF/3 suits digital instrumentation that must count samples, events, or timing intervals and present a decoded state. The 16-lead hermetic ceramic dual-in-line package is appropriate for through-hole instrument construction and provides a -55 °C to +125 °C rated operating range. The counter’s preset inputs can support calibration or selectable measurement intervals, while its outputs can drive display-control or status logic. Because this is a legacy CMOS counter, engineers should validate noise margins, clock-source edge quality, supply bypass behavior, and state transitions across the complete voltage and temperature range.
Recommended
Industrial Sequence Control
The CD4018BF/3 can support legacy industrial sequence-control systems where a repeatable count drives discrete process steps. Its fully static operation preserves the count between clock events, and the preset function allows different sequence lengths without rebuilding the counter hardware. The through-hole CDIP-16 package facilitates repair and replacement in older control equipment. Integration requires careful inspection of reset priority, preset loading, unused-input states, and recovery timing. Designers should also confirm that the supply rail and all connected logic operate at compatible CMOS levels to prevent false clocking or incomplete count transitions.
Recommended
Modulo Counter and Retriggerable Timer
CD4018BF/3 is useful in modulo-count and retriggerable-timer arrangements because the preset function permits a defined count range while external logic detects and reloads the terminal state. Its medium-speed operation supports clock sources significantly faster than typical industrial timing intervals, and its single-supply CMOS construction simplifies integration with 5 V, 10 V, or 15 V logic systems. To obtain repeatable timing, the feedback path must not introduce race conditions, and clock, reset, and preset recovery times must be respected. Pull-up or pull-down treatment of unused inputs is also necessary for deterministic operation.
Recommended
Recommended Products Summary
Engineering reference data for CD4018BF/3 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product |
|---|---|
| Package | 16-lead hermetic ceramic dual-in-line package |
| Brand | Harris Corporation |
| Product Type | CMOS presettable binary counter and divide-by-N circuit |
| Logic Family | CD4000-series CMOS |
| Maximum Operating Frequency | 10 MHz typical at 10 V |
| Parametric Supply Ratings | 5 V, 10 V, and 15 V |
| Maximum Input Current | 1 µA at 18 V |
| Operating Temperature Range | -55 °C to +125 °C |
| Fully Static Operation | Yes |
| Lead Count | 16 leads |
Key Differentiators
- Matches the original CD4018B counter function in a hermetic ceramic CDIP package (vs CD4018BM)
- Supports medium-speed counting at a 10 V supply (vs CD4018BF)
- Provides a defined set of operating and environmental ratings (vs CD4018B types with unspecified ordering suffix)
Design Notes
Treat clock, reset, and preset signals as a coordinated timing system. Check the manufacturer’s clock-pulse-width and recovery-time diagrams before choosing a feedback network, and ensure that preset data is stable before the active clock edge. A decoded terminal count must not create a combinational feedback path that retriggers or advances the counter more than once per intended cycle.
Use the manufacturer’s 16-lead CDIP pin orientation and preserve adequate clearance between adjacent ceramic-package leads. Place any local supply bypass close to the device’s power and ground connections, and route clock and reset traces away from noisy switching nodes. A conventional through-hole footprint is required; SOIC and TSSOP CD4018-family devices are not footprint-compatible with the target.
Operate the counter from a supply compatible with its 5 V, 10 V, and 15 V parametric ratings. Input levels must not exceed the limits for the selected supply because excessive input voltage can damage the input structures, while undershoot can create unintended clocking. Verify the absolute maximum input and supply ratings in the manufacturer datasheet before connecting external signals.
Keep the external clock source clean and use the shortest practical routing path for high-rate operation. Although the device is fully static when the clock is inactive, slow or noisy edges can create multiple transitions inside the switching window. Confirm that the source amplitude, rise and fall characteristics, and return path satisfy the voltage and timing requirements of the selected supply.
Compliance Information
The component is a legacy Harris Corporation 16-CDIP counter. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established from the cited manufacturer-family information and must be confirmed for the exact ordering variant.