Infineon

CY8C3446LTI-084 - 8-Bit 50MHz PSoC 3 MCU | Infineon

부품 번호: CY8C3446LTI-084 ✓ 활성
1.71 V to 5.5 V Vdss 68-QFN, 8 mm x 8 mm Package 50 MHz Speed 64 KB flash (64K x 8) Memory
MOQ: 1 |

CY8C3446LTI-084 개요

Infineon CY8C3446LTI-084 is an 8-bit PSoC 3 microcontroller with a 50 MHz 8051 CPU, 64 KB of embedded flash memory, and 8 KB of SRAM, packaged in a 68-pin QFN measuring 8 mm by 8 mm. It combines an embedded MCU core with programmable analog and digital blocks in one mixed-signal device, allowing compact control designs without relying on separate analog ICs for common interface functions.

A programmable system-on-chip is a mixed-signal semiconductor that integrates a microcontroller, analog converters, comparators, timers, and programmable digital logic into one package. The PSoC 3 family places these resources behind configurable peripherals, so a designer can adapt signal acquisition, conditioning, and control behavior to an application instead of fixing every function in dedicated silicon. This places the CY8C3446LTI-084 within the hierarchy of embedded controllers, mixed-signal microcontrollers, and programmable system-on-chip devices.

Three headline characteristics define the device: its 50 MHz maximum CPU clock, 64 KB flash program memory, and 8 KB SRAM. The 8051-based processor provides a familiar instruction set while the PSoC architecture adds configurable analog and digital peripherals. The 1.71 V to 5.5 V operating range supports both 3.3 V and 5 V system rails, and the listed 25 I/O provide connections for sensors, actuators, communications, and control signals within a compact 8 mm by 8 mm footprint.

The 64 KB flash provides on-chip program storage for firmware, while the 8 KB SRAM holds working data, stack state, and peripheral buffers. The 50 MHz clock supports faster control loops and time-sensitive digital functions than lower-clock 8-bit systems. The exact divider, timer, ADC, DAC, comparator, and GPIO configuration available to a specific design should be confirmed against the device datasheet because PSoC peripheral assignments are selected through device configuration rather than through a fixed external pin map.

Typical uses include industrial sensor controllers, building and access-control modules, compact motor-control boards, digital potentiometer and analog-interface designs, and low-cost consumer products with a small number of mixed-signal I/O functions. Its small QFN package also suits densely populated control boards where component area is limited. Designers should confirm that the exposed-pad connection and thermal requirements are compatible with the PCB stack-up and assembly process.

When planning a PCB layout, place decoupling capacitors close to the supply pins, route sensitive analog inputs away from fast-switching nodes, and follow the manufacturer's recommended exposed-pad land pattern. Because a mixed-signal device can combine sensitive analog functions with digital peripherals, grounding, isolation between analog and digital return paths, and stable reference routing can be as important as the pin assignment itself.

This page consolidates the key device characteristics, ordered-family alternatives, package details, application guidance, and practical PCB considerations into one engineering reference. It is designed to support initial component selection and board planning while directing final verification to the manufacturer datasheet for the exact ordering code, temperature grade, pin multiplexing, and electrical limits.

드롭인 대체품: CY8C3446LTI-084 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: CY8C3446LTI-084 (동일 폼 팩터 및 풋프린트) — 차이점: CPU Core, Package, Program Memory.

Infineon
CPU Core: 8-bit 8051
Package: 68-QFN, 8 x 8 mm
Program Memory: 64 KB flash
비교 대상: CY8C3446LTI-084 →

CY8C3446LTI-074

✅ 드롭인
Infineon
📦 68-QFN (8 mm x 8 mm)
PSoC 3 programmable system-on-chip microcontroller · 8-bit 8051 · 50 MHz · 64 KB flash · 64K x 8 bits · 8 KB · 2 KB · 8 KB

가격 문의

데이터시트 보기 →

CY8C3446LTI-073

✅ 드롭인
Infineon
📦 68-QFN (8 mm x 8 mm)
PSoC 3 programmable system-on-chip microcontroller (8-bit architecture) · 8051 single-core processor (8-bit architecture) · 50 MHz · 64 kByte (64K x 8 bits) · 8 kByte · 2 kByte · 8 kByte · 1.71 V to 5.5 V

가격 문의

데이터시트 보기 →

CY8C3446LTI-085

✅ 드롭인
Infineon
📦 68-QFN (8 mm x 8 mm)
8-bit PSoC 3 microcontroller · 8051, single core · 50 MHz · 64 KB (64K x 8) · 8 KB · 2 KB · 8 KB · 1.71 V to 5.5 V

가격 문의

데이터시트 보기 →

CY8C3446LTI-084 최대 정격 & 전기적 특성

Product Type 8-bit PSoC 3 mixed-signal microcontroller
CPU Core 8051, 8-bit
Maximum CPU Frequency 50 MHz
Program Memory 64 KB flash (64K x 8)
SRAM 8 KB
동작 공급 전압 1.71 V to 5.5 V
I/O Count 25 I/O
Programmable Analog and Digital Resources PSoC 3 configurable mixed-signal architecture
패키지 68-QFN, 8 mm x 8 mm
Package Type QFN, surface mount
실장 유형 Surface Mount
Ordering Code CY8C3446LTI-084

CY8C3446LTI-084 qfn, surface mount 핀 구성 가이드

CY8C3446LTI-084(qfn, surface mount 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

CY8C3446LTI-084의 qfn, surface mount 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: CY8C3446LTI-084.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

CY8C3446LTI-084 적합 용도: 6 애플리케이션s: Industrial Sensor Controller, Building Access and Security Control, Compact Motor and Actuator Control, Digital Potentiometer and Analog Interface, Networked Data Acquisition Module, Consumer Interface and Control Module.

🏭

Industrial Sensor Controller

The CY8C3446LTI-084 fits industrial sensor-controller boards that must acquire, condition, and interpret multiple signals within a limited footprint. Its 50 MHz 8051 CPU provides execution headroom for control algorithms, while 64 KB of flash stores application firmware and 8 KB of SRAM supports working buffers and peripheral state. The PSoC 3 configurable analog and digital resources can implement interface functions without multiplying discrete components. Place bypass capacitors near the supply pins and keep analog traces away from switching nodes so the small 8 mm by 8 mm 68-QFN package maintains a usable signal environment.

🔒

Building Access and Security Control

The CY8C3446LTI-084 is appropriate for access-control and security modules that combine local decision logic with external sensors and electromechanical outputs. The 25 I/O can support digital inputs, indicator outputs, and bus connections, while the 50 MHz processor handles debouncing, state-machine updates, and communication tasks. The 64 KB flash accommodates protocol and application code, and 8 KB of SRAM is useful for event buffers. In a compact 68-QFN implementation, maintain a clean analog reference path and isolate long external lines from sensitive control inputs to improve system immunity.

⚡

Compact Motor and Actuator Control

The CY8C3446LTI-084 can serve as the logic controller in compact motor, valve, or actuator products where deterministic digital control and mixed-signal support are needed. The 50 MHz 8051 core executes position, speed, or timing routines, while configurable timers and digital blocks handle pulse generation and input capture. With 64 KB of flash for control code and 8 KB of SRAM for state variables, the device provides useful capacity without requiring a larger package. Keep switching-device drives and motor wiring separated from analog and low-level control traces to prevent transient coupling into the microcontroller.

🎛️

Digital Potentiometer and Analog Interface

The programmable mixed-signal resources of the CY8C3446LTI-084 make it suitable for digital potentiometer, signal-conditioning, and interface-control products. The 8051 core runs at 50 MHz, providing deterministic control of configurable analog and digital blocks, while 64 KB flash stores lookup tables and device logic. The device consolidates functions that would otherwise require separate microcontroller support and passive networks. Layout quality is especially important in this use: route high-impedance analog inputs away from digital outputs and use the manufacturer's recommended grounding arrangement to minimize conversion error.

📡

Networked Data Acquisition Module

The CY8C3446LTI-084 fits compact data-acquisition modules that gather local measurements and forward processed results over a digital interface. Its 50 MHz processor can run sampling schedules, filtering, calibration, and protocol handling, while the configurable peripheral architecture supports signal-path customization. The 64 KB flash and 8 KB SRAM provide separate program and working-memory regions for a standalone controller. A communication companion such as an Ethernet transceiver or RS-232 interface can be placed nearby, but the layout should separate high-speed digital return currents from the analog input area.

📱

Consumer Interface and Control Module

The CY8C3446LTI-084 is suitable for compact consumer products that need flexible control and configurable peripheral behavior in a small board area. The 25 I/O support keys, indicators, displays, and serial links, while the 50 MHz CPU can coordinate multiple UI and control tasks. Its 1.71 V to 5.5 V operating range permits integration across common 3.3 V and 5 V rails. The 68-QFN package reduces board-space demand, but exposed-pad soldering and ground-via placement must follow the manufacturer layout guidance to maintain electrical and thermal performance.

What is the CY8C3446LTI-084?
The CY8C3446LTI-084 is an 8-bit Infineon PSoC 3 mixed-signal microcontroller with a 50 MHz 8051 CPU, 64 KB of flash, and 8 KB of SRAM. According to the Infineon datasheet, the device integrates configurable analog and digital resources in a 68-QFN package measuring 8 mm by 8 mm. It is intended for compact embedded designs that combine control logic with signal acquisition, interface, or analog-output functions.
What are the key specifications of CY8C3446LTI-084?
The principal CY8C3446LTI-084 specifications are a 50 MHz maximum CPU clock, 64 KB of program flash, 8 KB of SRAM, a 1.71 V to 5.5 V supply range, and 25 I/O. The Infineon datasheet identifies the device as an 8051-based PSoC 3 with a 68-QFN package. Its configurable analog and digital blocks provide additional flexibility beyond the fixed GPIO and serial-interface resources of a basic 8-bit MCU.
Where can I download the CY8C3446LTI-084 datasheet PDF?
The CY8C3446LTI-084 datasheet can be obtained through the Infineon product documentation or the manufacturer-linked PDF indexed on EEWORLD. The document contains the authoritative pin descriptions, electrical characteristics, clock options, power behavior, memory map, and ordering information. Use the datasheet revision associated with the exact ordering code before assigning peripheral functions or finalizing a PCB footprint.
Where can I find the CY8C3446LTI-084 pinout?
The CY8C3446LTI-084 pinout is defined in the pin-description tables and package drawings in the manufacturer datasheet. Because the 68-QFN package uses programmable peripheral multiplexing, several pins can perform more than one function depending on the device configuration. Consult the pin table for the exact ordering code rather than relying on a generic 68-pin drawing, and use the package drawing to define the exposed-pad connection.
Can CY8C3446LTI-084 replace CY8C3446LTI-074?
The CY8C3446LTI-074 is a closely related member of the same CY8C3446 device family and is listed with the same 50 MHz 8051 core, 64 KB flash, and 68-QFN package. The ordering suffixes can encode different grade or qualification conditions, so interchangeability depends on the required temperature range and procurement specification. Confirm those conditions in the manufacturer ordering table before treating it as a drop-in substitution.
What is the difference between CY8C3446LTI-084 and CY8C3446LTI-085?
The CY8C3446LTI-085 is another ordering configuration of the same CY8C3446 PSoC 3 family, with the manufacturer listing 64 KB of flash, a 50 MHz 8051 core, and a 1.71 V to 5.5 V operating range. The final ordering characters distinguish the specific part configuration. Check temperature grade, qualification, and approved order codes in the Infineon ordering information before selecting between them.
When should I choose CY8C3446LTI-084 instead of a conventional 8-bit MCU?
Choose the CY8C3446LTI-084 when the design benefits from combining an 8051 CPU with configurable mixed-signal resources in one 68-QFN device. Its 50 MHz clock, 64 KB flash, 8 KB SRAM, and 25 I/O are suitable for control-heavy embedded products that need programmable analog or digital functions. A conventional 8-bit MCU remains appropriate when fixed peripherals, lower cost, or a simpler development path are the dominant requirements.
Is CY8C3446LTI-084 suitable for sensor and industrial control applications?
Yes, the CY8C3446LTI-084 is suitable for sensor and industrial control applications that benefit from local signal conditioning and configurable peripherals. Its PSoC 3 architecture combines an 8051 control core with programmable mixed-signal blocks, while the 25 I/O support sensors, actuators, and digital interfaces. Industrial adoption should also be checked against the required operating temperature and any facility-specific reliability criteria.
What is the best drop-in replacement for CY8C3446LTI-084?
The closest documented alternatives are the same-family CY8C3446LTI-074, CY8C3446LTI-073, and CY8C3446LTI-085, which retain the 68-QFN format and core PSoC 3 identity. A true drop-in decision must verify pin functions, flash, SRAM, operating range, temperature grade, qualification, and the ordering suffix in the manufacturer documentation. Firmware may also require configuration changes even when the physical package remains unchanged.
What can replace the CY8C3446LTI-084 in an existing design?
The CY8C3446LTI-084 can generally be replaced only after checking both electrical and software compatibility. Same-family CY8C3446 variants with the 68-QFN package are the natural starting point because the core, memory class, and supply range are similar. Confirm the exposed-pad layout, peripheral assignments, temperature requirements, and PSoC configuration files before committing, because a matching package does not by itself guarantee identical behavior.
Where can I buy CY8C3446LTI-084 online?
Use the Request a Quote form on this page to request CY8C3446LTI-084 pricing, current inventory, and a scheduled delivery proposal. The form lets you specify the required quantity, shipment destination, and date without relying on an outdated catalog price. Because availability for programmable microcontrollers can fluctuate, request a written quotation that confirms the exact ordering code and traceability requirements.
What is the price of CY8C3446LTI-084?
Submit the CY8C3446LTI-084 requirements through the Request a Quote form on this page for a current price and volume proposal. A meaningful quotation depends on order quantity, delivery schedule, and destination. The form is also the appropriate route for requesting any available traceability, date-code, or inspection documentation that may be required for production use.
What is the lead time for CY8C3446LTI-084?
Request the current lead time for CY8C3446LTI-084 by submitting the quantity and required delivery date through the Request a Quote form on this page. Lead time can change with order volume, manufacturing allocation, and logistics conditions, so it should be confirmed for each planned production run. The quoted response should identify the exact ordering code, packing requirement, and expected shipment date.
Is CY8C3446LTI-084 in stock?
Current CY8C3446LTI-084 stock should be confirmed through the Request a Quote form on this page because availability varies with order quantity and purchasing activity. Include your required delivery date and packaging preference so the response can reflect a usable schedule rather than a nominal stock count. For scheduled production, ask for a rolling forecast and any advance-notification arrangement.
How do I design the PCB around a 68-QFN PSoC 3 microcontroller?
Start the CY8C3446LTI-084 layout with the manufacturer package drawing and recommended land pattern, including the exposed-pad connection. Place bypass capacitors close to the supply pins, route sensitive analog inputs away from switching edges, and provide a low-impedance ground reference. After schematic capture, verify every pin against the PSoC configuration because programmable multiplexing can change peripheral assignments on the physical pins.

엔지니어링 참조 데이터: CY8C3446LTI-084 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the CY8C3446LTI-084 when the design needs an 8051-based controller with 50 MHz performance, 64 KB flash, 8 KB SRAM, and configurable mixed-signal peripherals in a 68-QFN package. Select CY8C3446LTI-074 or CY8C3446LTI-073 when their specific ordering conditions better match the production requirements while retaining the same core family and footprint. Consider CY8C3446LTI-085 when its ordering configuration satisfies the required supply, temperature, and qualification conditions. In every case, verify temperature grade, exposed-pad construction, peripheral configuration, and firmware support in the manufacturer ordering and datasheet information. A shared package makes PCB reuse possible, but it does not remove the need to confirm pin multiplexing and software compatibility.

대체품과의 비교

파라미터 이 제품 CY8C3446LTI-074 CY8C3446LTI-073 CY8C3446LTI-085
Brand Infineon Infineon Infineon Infineon
Package 68-QFN (8 mm x 8 mm) 68-QFN (8 mm x 8 mm) - same 68-QFN (8 mm x 8 mm) - same 68-QFN (8 mm x 8 mm) - same
Product Family PSoC 3 CY8C34xx PSoC 3 CY8C34xx PSoC 3 CY8C34xx PSoC 3 CY8C34xx
CPU Core 8051, 8-bit 8051, 8-bit 8051, 8-bit 8051, 8-bit
Maximum CPU Frequency 50 MHz 50 MHz 50 MHz 50 MHz
Program Flash 64 KB 64 KB 64 KB 64 KB
SRAM 8 KB 8 KB 8 KB 8 KB
Ordering Configuration LTI-084 LTI-074 LTI-073 LTI-085

주요 차별점

  • Configurable mixed-signal integration (vs CY8C3446LTI-074)
  • High clock rate with embedded memory (vs CY8C3446LTI-073)
  • Wide 3.3 V and 5 V system compatibility (vs CY8C3446LTI-085)

설계 노트

Use the manufacturer land pattern and exposed-pad drawing before releasing the PCB artwork. Place the required bypass capacitors adjacent to the supply pins, with short and wide return paths to the ground plane. The exposed pad is a central thermal and electrical feature of the 68-QFN package, so its via pattern and solder-assembly profile must be coordinated with the board stack-up and soldering process.

Separate analog inputs and references from digital switching nodes wherever the PSoC configuration permits. PSoC peripherals can place analog and digital functions in the same device, so package adjacency alone does not guarantee signal isolation. Route sensitive inputs on the quiet side of the board, avoid coupling to the clock net and high-current outputs, and use a continuous ground reference beneath the device.

Do not create the PCB pinout from a generic QFN drawing. The CY8C3446LTI-084 uses programmable peripheral multiplexing, and the selected PSoC configuration determines which functions appear on many pins. Verify the pin-description table for the exact ordering code, review startup and configuration pins in the manufacturer's datasheet, and regenerate the firmware configuration whenever the peripheral assignment changes.

Design the supply network for both 3.3 V and 5 V operating environments only after confirming all selected I/O levels and external interfaces. Follow the manufacturer guidance for supply voltage, decoupling, and power sequencing. Keep analog and digital return currents under their respective signal domains and connect them at a controlled low-impedance point to reduce ground-potential differences across sensitive PSoC blocks.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Compliance declarations are not stated in the cited catalog records. Request the current manufacturer product declarations for the exact ordering code before release to a regulated market.

데이터 검증일: 2026-11-15 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

CY8C3446LTI-084 datasheet CY8C3446LTI-084 pinout CY8C3446LTI-084 datasheet pdf CY8C3446LTI-084 specifications CY8C3446LTI-084 price CY8C3446LTI-084 stock Infineon CY8C3446LTI-084 CY8C3446LTI-084 equivalent CY8C3446LTI-084 drop-in replacement CY8C3446LTI-084 vs CY8C3446LTI-074 CY8C3446LTI-084 68-QFN footprint CY8C3446LTI-084 50MHz 8051 CY8C3446LTI-084 sensor controller what is CY8C3446LTI-084

관련 부품 & 용어

Infineon Cypress Semiconductor CY8C3446LTI-084 CY8C3446LTI-074 CY8C3446LTI-073 CY8C3446LTI-085 PSoC 3 PSoC microcontroller mixed-signal microcontroller 8051 CPU 8-bit CPU embedded flash SRAM programmable analog block programmable digital block 68-QFN QFN package family surface-mount package 50 MHz clock 1.71 V to 5.5 V operating range 25 I/O industrial sensor controller access control system digital potentiometer data acquisition module
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기