DSPIC33CK512MP605-I/PT - 16-bit 100MIPS DSC 512KB | Microchip
부품 번호: DSPIC33CK512MP605-I/PT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $1 | $1.00 |
| 10 | $1 | $10.00 |
| 100 | $1 | $100.00 |
| 500 | $1 | $500.00 |
| 1,000 | $1 | $1,000.00 |
DSPIC33CK512MP605-I/PT 개요
A digital signal controller combines the compute architecture of a microcontroller with the math acceleration of a digital signal processor. In the power-management hierarchy, the dsPIC33CK family sits within Microchip's 16-bit MCU/DSC portfolio, which spans general-purpose PIC microcontrollers up to high-performance DSCs for real-time control loops running at switching frequencies of hundreds of kilohertz.
Key features include the 100 MHz (100 MIPS) dsPIC33C core with integrated DSP engine, dual-panel Flash that allows program execution from one panel while erasing/writing the other, and eight DMA channels that offload data movement from the CPU. Peripherals include CAN FD for automotive and industrial networking, multiple 12-bit high-speed ADC modules with dedicated sample/hold circuits, configurable on-chip op amps that reduce external component count in current-sense paths, and high-resolution PWM outputs with dead-time control.
Architecturally, the dsPIC33CK core uses a modified Harvard structure with zero-overhead looping and hardware division/ multiply-accumulate (MAC) support, sustaining deterministic interrupt latency for time-critical control loops. The -I suffix denotes the industrial temperature grade of -40C to +85C, and the /PT suffix denotes the 48-lead TQFP (7x7 mm) tray package.
Typical applications include sensorless and field-oriented-control (FOC) brushless DC and PMSM motor drives, digital power supplies (LLC, totem-pole PFC), automotive and industrial CAN FD nodes, and digital lighting and solar/MPPT converters.
Design consideration: this controller operates from a 3.0V to 3.6V single supply, so level shifting is required when interfacing with 5V systems; the internal core regulator requires the datasheet-specified VCAP capacitor for stable operation.
This page synthesizes verified distributor data, drop-in family alternatives, and application guidance not consolidated on the manufacturer product page.
드롭인 대체품: DSPIC33CK512MP605-I/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: DSPIC33CK512MP605-I/PT (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature, Package, PWM, CAN Interface, Core.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
DSPIC33CK512MP605-E/PT
✅ 드롭인✓ 재고 있음
$3.6 / 개
데이터시트 보기 →DSPIC33CK512MP305-I/PT
✅ 드롭인✓ 재고 있음
$4.36 / 개
데이터시트 보기 →DSPIC33CK256MP205-I/PT
✅ 드롭인✓ 재고 있음
$3.55 / 개
데이터시트 보기 →DSPIC33CK128MP202-I/2N
✅ 드롭인✓ 재고 있음
$3.05 / 개
데이터시트 보기 →DSPIC33CK128MP506-E/MR
✅ 드롭인✓ 재고 있음
$4.42 / 개
데이터시트 보기 →DSPIC33CK512MP605-I/PT 최대 정격 & 전기적 특성
| Core Architecture | 16-bit dsPIC33C DSC |
| CPU Speed | 100 MIPS (100 MHz) |
| Program Memory Size | 512 KB (512K x 8) Flash |
| RAM Size | 64 KB |
| Supply Voltage Range | 3.0 V to 3.6 V |
| ADC Resolution | 12-bit |
| CAN Interface | CAN FD |
| Op Amps | On-chip operational amplifiers |
| PWM | High-resolution PWM peripheral |
| DMA Channels | 8 |
| External Interrupts | 4 |
| Serial Interfaces | 3 serial I/O ports (UART/SPI/I2C via PPS) |
| 동작 온도 | -40C to +85C (Industrial, -I grade) |
| 패키지 | 48-TQFP (7x7 mm), /PT |
| 실장 유형 | Surface Mount |
| Programming Interface | ICSP (PGECx/PGEDx pairs) |
| RoHS 상태 | Compliant |
DSPIC33CK512MP605-I/PT 48-tqfp (7x7 mm), /pt 핀 구성 가이드
DSPIC33CK512MP605-I/PT(48-tqfp (7x7 mm), /pt 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: DSPIC33CK512MP605-I/PT.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
DSPIC33CK512MP605-I/PT 적합 용도: 6 애플리케이션s: FOC Motor Drives (BLDC/PMSM), Digital Power Supplies (LLC, Totem-Pole PFC), Automotive CAN FD Nodes, Solar MPPT Converters, Industrial Automation and Robotics, IoT and Smart Sensor Nodes.
FOC Motor Drives (BLDC/PMSM)
The DSPIC33CK512MP605-I/PT is purpose-built for field-oriented control of brushless DC and PMSM motors. Its 100 MIPS core with DSP MAC instructions executes current and speed loops deterministically at PWM frequencies of 20-100 kHz, while 12-bit ADCs with dedicated sample/hold circuits capture phase currents synchronized to PWM events. The on-chip operational amplifiers condition low-side shunt signals without external amplifiers, and high-resolution PWM generates center-aligned outputs with hardware dead-time insertion. Sensorless algorithms (sliding-mode, back-EMF observers) benefit from the 512KB Flash and 64KB RAM for complex observer code. Typical systems include industrial servo drives, HVAC blowers, and e-mobility traction stages.
추천
Digital Power Supplies (LLC, Totem-Pole PFC)
In digital power conversion - LLC resonant converters, totem-pole PFC, and synchronous buck stages - the DSPIC33CK512MP605-I/PT provides the fast deterministic control needed at switching frequencies above 100 kHz. The 100 MHz core closes voltage and current loops with sub-microsecond latency, while the high-resolution PWM peripheral delivers fine duty-cycle and phase-shift resolution critical for LLC burst-mode and ZVS control. Dual 12-bit ADCs sample input/output voltage and current simultaneously, and hardware dead-time control protects the half-bridge. The 512KB Flash accommodates multiple operating-mode firmware profiles and telemetry code. Use cases include server power supplies, telecom rectifiers, and fast chargers.
추천
Automotive CAN FD Nodes
With an integrated CAN FD controller, the DSPIC33CK512MP605-I/PT fits automotive and industrial network nodes that combine communication with local intelligence - pump controllers, valve actuators, blower modules, and sensor aggregators. CAN FD's larger payload and higher data phase support firmware-over-CAN updates, enabled by the 512KB dual-panel Flash that allows execution during panel swap. Eight DMA channels move CAN frames and ADC results without CPU overhead, keeping interrupt latency low for time-critical control tasks. For underhood installations up to 125C, specify the -E grade variant, which shares the identical 48-TQFP footprint and firmware.
추천
Solar MPPT Converters
Solar maximum-power-point-tracking (MPPT) converters benefit from the DSPIC33CK512MP605-I/PT's combination of fast sensing and computing. The 12-bit ADCs sample panel voltage/current and bus voltage concurrently via simultaneous sampling, feeding perturb-and-observe or incremental-conductance MPPT algorithms executed on the 100 MIPS core with DSP acceleration. High-resolution PWM drives the boost or buck power stage with the phase-shift flexibility needed for interleaved topologies, reducing input ripple. The 512KB Flash stores logging, safety, and communication firmware including CAN FD reporting. Applications include residential string optimizers, battery charge controllers, and micro-inverter DC-link management.
추천
Industrial Automation and Robotics
In factory automation - joint controllers for robots, conveyor servos, and precision pumps - the DSPIC33CK512MP605-I/PT delivers the deterministic real-time behavior required for coordinated motion. The 100 MHz dsPIC33C core sustains control loop jitter in the nanosecond range, essential for smooth torque control, while the peripheral pin select (PPS) architecture maps UART, SPI, and I2C to convenient pins for encoder interfaces (BiSS-C/SSI over SPI) and fieldbus gateways. Eight DMA channels stream encoder counts and ADC samples into the 64KB RAM without CPU intervention. Four external interrupt inputs support fast fault and limit-switch handling.
추천
IoT and Smart Sensor Nodes
For intelligent sensing endpoints - vibration monitors, power-quality meters, and condition-monitoring nodes - the DSPIC33CK512MP605-I/PT performs on-edge DSP (FFT-based spectrum analysis) thanks to its hardware MAC engine and 64KB RAM, then reports over CAN FD or serial links. The 512KB Flash retains multiple configuration sets and on-device data buffering, and the 3.0-3.6V supply supports common 3.3V sensor rails. Low-power modes allow sleep between measurement windows in battery-backed installations. The PPS architecture simplifies board routing when multiple analog sensors share digital interfaces, and the industrial -40C to +85C rating covers unconditioned environments.
추천
추천 제품 요약
엔지니어링 참조 데이터: DSPIC33CK512MP605-I/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | DSPIC33CK512MP605-E/PT | DSPIC33CK512MP305-I/PT | DSPIC33CK256MP205-I/PT |
|---|---|---|---|---|
| Package | 48-TQFP (7x7 mm) | 48-TQFP (7x7 mm) - same | 48-TQFP (7x7 mm) - same | 48-TQFP (7x7 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Speed | 100 MIPS | 100 MIPS | 100 MIPS | 100 MIPS |
| Flash Memory | 512 KB | 512 KB | 512 KB | 256 KB |
| RAM | 64 KB | 64 KB | 64 KB | 64 KB |
| Temperature Range | -40C to +85C (-I) | -40C to +125C (-E) | -40C to +85C (-I) | -40C to +85C (-I) |
주요 차별점
- Full peripheral set with CAN FD and on-chip op amps (vs DSPIC33CK512MP305-I/PT)
- Double the program memory for complex algorithms (vs DSPIC33CK256MP205-I/PT)
- Industrial temperature grade at lower cost (vs DSPIC33CK512MP605-E/PT)
설계 노트
The DSPIC33CK512MP605-I/PT operates from a 3.0V-3.6V single rail; the internal regulator that generates the core supply requires a low-ESR VCAP capacitor of the value specified in the Microchip datasheet on the VCAP pin. Do not drive any I/O pin above VDD, and add level shifting for 5V signals. Decouple each VDD pin with 0.1uF ceramics placed within 2 mm, plus one bulk 4.7-10uF capacitor per rail.
For motor-control layouts, route phase-current shunt signals differentially to the op-amp/ADC pins with kelvin connections at the shunt, and keep analog grounds as a local island joined to power ground at one point near the decoupling return. Place PGECx/PGEDx ICSP programming header traces away from high-dv/dt switch nodes; the programming pair used must be matched (PGEC2 with PGED2), so reserve a labeled 5-pin header on the chosen pair.
ICSP programming fails when ICSPCLK and ICSPDAT come from mismatched PGECx/PGEDx pairs - Northern Software's dsPIC33CK512MP605 guide confirms the pair must be used consistently. Also note that the MP605 peripheral set varies within the dsPIC33CK512MPxx family: when porting firmware to MP305/MP205 drop-ins, verify CAN FD, op-amp, and ADC channel availability in the family reference manual before assuming peripheral compatibility.
규정 준수 정보
RoHS compliance consistent with Microchip current production policy; REACH/halogen-free/conflict-minerals declarations should be pulled from Microchip environmental documentation.
