DSPIC33FJ06GS102AT-E/TL - 16-bit DSC, 40 MIPs, 6KB Flash | Microchip
부품 번호: DSPIC33FJ06GS102AT-E/TL ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $4.95 | $4.95 |
| 10 | $4.45 | $44.50 |
| 100 | $3.95 | $395.00 |
| 500 | $3.55 | $1,775.00 |
| 1,000 | $3.18 | $3,180.00 |
DSPIC33FJ06GS102AT-E/TL 개요
A Digital Signal Controller combines the computational capability of a digital signal processor (DSP) with the peripheral integration and control architecture of a microcontroller (MCU). Within the power-management hierarchy, a DSC such as the dsPIC33FJ06GS102A sits at the heart of digital power conversion systems, replacing analog control loops with firmware-driven algorithms such as peak current mode control, voltage mode control, and power factor correction.
Key features include the 16-bit dsPIC RISC core running at up to 40 MIPs, dedicated SMPS PWM peripherals optimized for switching power supplies, 6KB self-programmable Flash, and AEC-Q100 automotive qualification with an extended -40C to +125C (E-grade) operating temperature range. The exposed-pad VTLA package improves thermal dissipation for high-switching-frequency designs.
Architecturally, the device pairs the DSP engine (17-bit x 17-bit multiplier, 40-bit accumulator, dual operand fetch) with the SMPS-focused PWM module, enabling deterministic cycle-by-cycle control of converters operating at hundreds of kHz. Program memory is organized as 2K x 24-bit instruction words.
Typical applications include AC-DC and DC-DC power supplies, digital lighting ballasts, battery chargers, automotive power modules, and embedded control systems requiring DSP-level math with MCU-style peripherals.
A key design consideration is supply integrity: use proper decoupling on the 3.3V rail and a solid ground connection to the exposed thermal pad for both EMI and thermal performance.
This page synthesizes distributor availability, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.
드롭인 대체품: DSPIC33FJ06GS102AT-E/TL — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: DSPIC33FJ06GS102AT-E/TL (동일 폼 팩터 및 풋프린트) — 차이점: Package, Core Architecture, Packaging, Series, Operating Temperature.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
DSPIC33FJ06GS102AT-I/TL
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
DSPIC33FJ16GS102AT-E/TL
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
DSPIC33FJ06GS202AT-E/TL
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$2.71 / 개
데이터시트 보기 →DSPIC33FJ06GS102AT-E/TL 최대 정격 & 전기적 특성
| Core Architecture | 16-bit dsPIC RISC |
| Maximum CPU Speed | 40 MIPs (40 MHz) |
| Program Memory Size | 6 KB (2K x 24) Flash |
| RAM Size | 0.25 KB |
| 공급 전압 | 3.3 V |
| Specialty Peripherals | SMPS PWM |
| Qualification | AEC-Q100 (Automotive) |
| 동작 온도 | -40C to +125C (E grade) |
| 패키지 | 36-VTLA (5x5 mm), Exposed Pad |
| 실장 유형 | Surface Mount |
| 핀 수 | 36 |
| Product Series | dsPIC33FJ06GS102A (dsPIC 33F) |
| Packaging | Tape & Reel (T/R) |
| RoHS 상태 | Compliant |
| Applications | Automotive, Digital Power (SMPS) |
DSPIC33FJ06GS102AT-E/TL 36-vtla (5x5 mm), exposed pad 핀 구성 가이드
DSPIC33FJ06GS102AT-E/TL(36-vtla (5x5 mm), exposed pad 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: DSPIC33FJ06GS102AT-E/TL.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
DSPIC33FJ06GS102AT-E/TL 적합 용도: 6 애플리케이션s: AC-DC Digital Power Supplies, DC-DC Converters and Point-of-Load Regulation, Automotive Power Modules, Digital Lighting and Ballast Control, Battery Chargers, Embedded Industrial Control with DSP Math.
AC-DC Digital Power Supplies
The DSPIC33FJ06GS102AT-E/TL fits AC-DC converter control because its dedicated SMPS PWM module supports complementary outputs, programmable dead time, and cycle-by-cycle current limiting - features that analog controllers implement in fixed hardware. The 40 MIPs 16-bit DSP core executes control loops (peak current mode, voltage mode, PFC) at switching frequencies well into the hundreds of kHz with deterministic latency. Firmware-driven control also enables adaptive features such as burst mode, soft-start shaping, and fault logging that analog ICs cannot offer. Placed as the sole controller between the feedback dividers and the power stage gate drivers, the 3.3V DSC adds flexibility with minimal BOM overhead; the main trade-off is firmware development effort versus a fixed-function analog controller.
추천
DC-DC Converters and Point-of-Load Regulation
For synchronous buck and boost DC-DC converters, the DSPIC33FJ06GS102AT-E/TL provides high-resolution PWM and fast analog comparators within the SMPS module, enabling sub-cycle protection responses that software-only loops cannot match. The 0.25KB of RAM and 6KB Flash are sufficient for a full closed-loop DC-DC firmware including PI compensation, telemetry, and fault handling, making it a cost-optimized choice for point-of-load bricks and intermediate bus converters. The AEC-Q100 E-grade rating of -40C to +125C keeps it usable in automotive onboard charger auxiliary rails. Layout should keep the PWM output traces short to the gate driver and the exposed thermal pad soldered to a ground pour to limit switching-node noise coupling into the analog front end.
추천
Automotive Power Modules
The AEC-Q100 qualification and -40C to +125C E-grade temperature range make the DSPIC33FJ06GS102AT-E/TL suitable for automotive power electronics such as LED headlamp drivers, 48V mild-hybrid auxiliary converters, and battery management front ends. The SMPS PWM peripheral handles multi-phase interleaving and dead-time control, while the DSP core performs average-current loop compensation and diagnostics reporting over LIN/CAN via software or companion transceivers. Firmware-based control allows in-field feature updates and functional safety logging. Designers should account for automotive transients with proper TVS protection on supply inputs and verify cold-crank and jump-start voltage profiles against the 3.3V regulated rail upstream of the DSC.
추천
Digital Lighting and Ballast Control
Electronic ballasts and high-brightness LED drivers benefit from the DSPIC33FJ06GS102AT-E/TL's combination of resonant-mode-capable PWM (phase-shift and frequency control) and DSP math for power metering and dimming curve computation. The 40 MIPs core sustains feedback loops for PFC plus half-bridge stages concurrently, while the 6KB Flash holds the complete lamp/LED state machine including fault recovery. Firmware control enables DALI/DMX-style dimming protocols layered on the power control loop without an extra MCU. Because lamp ignitions impose large voltage transients, gate-drive isolation and snubber design matter more than DSC selection; the exposed-pad VTLA keeps the controller thermally stable in sealed luminaires where convection is limited.
추천
Battery Chargers
Multi-chemistry battery charging (Li-ion CC/CV, lead-acid staged, NiMH delta-peak) maps naturally onto the DSPIC33FJ06GS102AT-E/TL: the SMPS PWM controls the converter power stage while the 16-bit DSP core runs the charge algorithm, termination detection, and safety timers. The 6KB Flash accommodates multiple chemistry profiles selected at runtime, and the AEC-Q100 rating supports automotive USB and onboard chargers. Firmware-based control allows adaptive charge profiles based on measured temperature and impedance, improving battery life versus fixed analog chargers. Designers should implement independent hardware fault paths - the comparators within the SMPS module provide cycle-by-cycle overcurrent independent of software, a key safety layer for charger designs.
추천
Embedded Industrial Control with DSP Math
Beyond power conversion, the DSPIC33FJ06GS102AT-E/TL serves general industrial control that benefits from DSP instructions - sensor filtering (FIR/IIR), FFT-based condition monitoring, and fast PID loops for motor-less actuator control. The 16-bit core with 17x17 multiplier and 40-bit accumulator executes signal processing efficiently without a separate DSP chip, consolidating BOM cost. The 6KB Flash suits fixed-function nodes such as sensor transmitters, small HVAC controllers, and instrumentation front ends. When more connectivity or memory is needed, the same footprint family members (16KB variants) provide a scaling path without PCB respin. The -40C to +125C range also covers outdoor and panel-mounted equipment exposed to wide ambient swings.
추천
추천 제품 요약
엔지니어링 참조 데이터: DSPIC33FJ06GS102AT-E/TL — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | DSPIC33FJ06GS102AT-I/TL | DSPIC33FJ16GS102AT-E/TL | DSPIC33FJ06GS202AT-E/TL |
|---|---|---|---|---|
| Package | 36-VTLA (5x5 mm), Exposed Pad | 36-VTLA (5x5 mm) - same | 36-VTLA (5x5 mm) - same | 36-VTLA (5x5 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Speed | 40 MIPs | 40 MIPs | 40 MIPs | 40 MIPs |
| Flash Memory | 6 KB (2K x 24) | 6 KB (2K x 24) | 16 KB | 12 KB |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Qualification | AEC-Q100 (Automotive) | Industrial grade (not AEC-Q100) | AEC-Q100 (Automotive) | AEC-Q100 (Automotive) |
| Operating Temperature | -40C to +125C (E grade) | -40C to +85C (I grade) | -40C to +125C (E grade) | -40C to +125C (E grade) |
| SMPS PWM Peripherals | Yes (GS-series SMPS) | Yes (GS-series SMPS) | Yes (GS-series SMPS) | Yes (GS-series SMPS) |
주요 차별점
- AEC-Q100 automotive qualification (vs DSPIC33FJ06GS102AT-I/TL)
- Flash upgrade path in identical footprint (vs DSPIC33FJ16GS102AT-E/TL)
- Cost-optimized memory configuration (vs DSPIC33FJ06GS202AT-E/TL)
설계 노트
Solder the exposed thermal pad of the 36-VTLA package to a grounded copper pour with an array of thermal vias (typically 4-9 vias under the pad). This serves double duty: dissipating core heat at 40 MIPs operation and providing a low-inductance ground return for the SMPS PWM switching currents. Microchip's family datasheet pin-connection guidelines recommend solid VDD/VSS and AVDD/AVSS decoupling - place 0.1uF ceramic capacitors directly at each supply pin pair.
Keep PWM output traces from the dsPIC to the gate drivers as short and direct as possible, and route them away from the analog feedback divider traces feeding the ADC/comparator inputs. The high di/dt switching node of a SMPS converter will couple noise into feedback signals if shared on the same board region. Use a ground plane split or careful single-plane routing with star grounding at the controller to preserve ADC accuracy and cycle-by-cycle comparator thresholds.
Do not substitute the -I/TL industrial variant in AEC-Q100 automotive applications simply because it is pin-compatible - the qualification and temperature grading differ, and automotive customers may audit part markings. Similarly, the 6KB Flash fills quickly with a full SMPS control loop plus telemetry; verify code size headroom in the MPLAB XC-DSC compiler memory map early, and consider the 16KB DSPIC33FJ16GS102AT-E/TL (same footprint) if headroom is tight.
규정 준수 정보
AEC-Q100 automotive qualified per distributor product data. RoHS/lead-free status per standard Microchip current-production policy; REACH and halogen-free status not stated in provided data.
