EP20K300EFI672-2X - APEX 20KE 300K Gates FPGA | Intel / Altera
부품 번호: EP20K300EFI672-2X ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $285 | $285.00 |
| 10 | $256.5 | $2,565.00 |
| 100 | $228 | $22,800.00 |
| 500 | $199.5 | $99,750.00 |
| 1,000 | $171 | $171,000.00 |
EP20K300EFI672-2X 개요
An FPGA (Field-Programmable Gate Array) is a programmable logic device that allows engineers to implement arbitrary digital logic, memory, and I/O functions through software configuration. FPGAs sit within the broader taxonomy of programmable logic devices (PLDs), alongside CPLDs and structured ASICs, and are widely used for parallel processing, glue logic, high-speed interfacing, and hardware prototyping. The APEX 20KE family was Altera's first multi-core architecture combining Look-Up Table (LUT) logic, Embedded System Blocks (ESBs) for memory, and a high-bandwidth interconnect.
Key features of the APEX 20KE series include MultiCore™ architecture combining fine-grained logic elements with embedded memory, up to 147 kbit of on-chip SRAM distributed across ESBs, 408 user I/Os supporting multiple I/O standards, and in-system programmability via IEEE 1149.1 JTAG. The 672-ball FineLine BGA package provides ample signal breakout for high-pin-count designs while maintaining a manageable 1.0 mm or 1.27 mm ball pitch depending on variant.
Typical applications for the EP20K300EFI672-2X include telecommunications infrastructure (line cards, ATM switches, SONET/SDH framers), high-speed data acquisition systems, custom DSP coprocessors, glue logic for ASIC/ASSP replacement, and industrial control systems. Its industrial temperature range and 300K-gate capacity make it suitable for embedded computing where off-the-shelf processors cannot meet throughput requirements.
When designing with this device, note that the APEX 20KE family is now classified as mature/legacy by Altera/Intel; designers should confirm last-time-buy and support status before committing to new designs. Quartus II development software is required, and pin-compatible migration to Cyclone or Stratix devices typically requires board redesign. This page synthesizes distributor pricing, drop-in alternatives within the APEX 20KE family, and design guidance not found in the manufacturer datasheet.
드롭인 대체품: EP20K300EFI672-2X — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EP20K300EFI672-2X (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature, Package, Family, Process Technology, Speed Grade.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EP20K300EFI672-2N
✅ 드롭인✓ 재고 있음
$112 / 개
데이터시트 보기 →EP20K300EFC672-2X
✅ 드롭인✓ 재고 있음
$99.5 / 개
데이터시트 보기 →EP20K300EFC672-2N
✅ 드롭인✓ 재고 있음
$59.2 / 개
데이터시트 보기 →EP20K300EFC672-2
✅ 드롭인✓ 재고 있음
$58.5 / 개
데이터시트 보기 →EP20K300EFC672-1
✅ 드롭인✓ 재고 있음
$92.4 / 개
데이터시트 보기 →EP20K300EFI672-2X 최대 정격 & 전기적 특성
| Family | APEX 20KE |
| System Gates | 300,000 |
| Logic Elements (Cells) | 11,520 |
| Embedded Memory | 147,456 bits |
| User I/Os | 408 |
| Maximum Internal Frequency | 350 MHz |
| Propagation Delay | 1.68 ns |
| Core Supply Voltage | 1.8 V |
| Process Technology | 0.22 µm CMOS |
| 패키지 | 672-ball FineLine BGA (FBGA) |
| Package Pin Count | 672 |
| 동작 온도 | -40 °C to +85 °C (industrial) |
| 실장 유형 | Surface Mount |
| Speed Grade | -2X (enhanced) |
EP20K300EFI672-2X 672 핀 구성 가이드
EP20K300EFI672-2X(672 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EP20K300EFI672-2X.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EP20K300EFI672-2X 적합 용도: 6 애플리케이션s: Telecommunications Line Cards, High-Speed Data Acquisition, ASIC/ASSP Prototyping, Custom DSP Coprocessor, Industrial Motor Control, Legacy Industrial Controller Sustaining.
Telecommunications Line Cards
The EP20K300EFI672-2X fits telecommunications line cards because its 300,000 system gates and 408 user I/Os provide ample logic and pin resources for UTOPIA / POS-PHY interfaces, ATM segmentation-and-reassembly engines, and HDLC controllers. The -2X speed grade and 350 MHz internal performance support 155 Mbps to 622 Mbps SONET/SDH framers without external co-processors. Industrial temperature rating enables deployment in outdoor cabinets and central-office equipment. Embedded System Blocks (ESBs) deliver 147 kbit of on-chip memory for cell buffering, reducing external SRAM requirements and BOM cost in dense line-card designs.
추천
High-Speed Data Acquisition
The EP20K300EFI672-2X is well-suited to multi-channel data acquisition front-ends where 11,520 logic elements implement parallel DSP filter chains, FIFO buffers, and trigger logic. With 408 I/Os the device can interface directly to multiple 14-16 bit ADCs operating at 100+ MSPS using LVDS or parallel CMOS protocols. The 147 kbit embedded memory pools as distributed dual-port RAM for cross-channel correlation. Industrial -40 to +85 C temperature rating allows deployment in factory-floor test instruments and military/aerospace data recorders where commercial FPGAs cannot operate reliably.
추천
ASIC/ASSP Prototyping
Engineers use the EP20K300EFI672-2X as a pre-silicon prototyping vehicle for ASIC and ASSP designs in the 250K-350K gate range. The 11,520 logic elements and 147 kbit embedded memory map cleanly to typical ASIC architectures, while 408 I/Os emulate wide on-chip bus structures. Quartus II synthesis with the APEX 20KE library lets design teams validate RTL before tape-out, dramatically reducing respin risk. Industrial temperature support enables automotive and industrial customers to prototype in the same thermal envelope as their final silicon.
추천
Custom DSP Coprocessor
The EP20K300EFI672-2X serves as a glue-logic DSP coprocessor for fixed-point FFT, FIR, and correlator kernels in radar, sonar, and software-defined radio. Its 350 MHz internal performance sustains 32-bit parallel multiply-accumulate at rates sufficient for 50 MHz baseband processing. The 147 kbit embedded memory provides coefficient storage and overlap-save buffers, eliminating external memory accesses on critical inner loops. Combined with 408 I/Os, the device can bus-attach to external DSPs like the TMS320C6xxx or SHARC family as a hardware accelerator.
추천
Industrial Motor Control
The EP20K300EFI672-2X is appropriate for high-end industrial motor drives where the FPGA implements field-oriented control (FOC) state machines, SVPWM generators, and encoder interfaces. Its 408 I/Os accept multi-axis encoder feedback (incremental, SSI, EnDat) and drive IGBT gate-driver optocouplers in parallel. The industrial -40 to +85 C temperature rating withstands drive-cabinet environments where ambient temperatures routinely exceed 60 C. The 350 MHz performance enables torque-loop calculation under 1 µs for high-bandwidth servo applications.
추천
Legacy Industrial Controller Sustaining
The EP20K300EFI672-2X continues to serve in long-lifecycle industrial controllers (PLC, SCADA RTU, CNC) where installed bases exceed 15 years and field replacement requires identical form, fit, and function. Its 300K-gate capacity and 408 I/Os match the logic footprint of established control platforms, allowing direct board swap during field repair. Industrial temperature rating and APEX 20KE MultiCore architecture remain compatible with legacy Quartus II design files. Engineers maintaining these systems should procure last-time-buy inventory while authorized supply remains available.
추천
추천 제품 요약
엔지니어링 참조 데이터: EP20K300EFI672-2X — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EP20K300EFI672-2N | EP20K300EFC672-2X | EP20K300EFC672-2N | EP20K300EFC672-2 | EP20K300EFC672-1 |
|---|---|---|---|---|---|---|
| Brand | Intel (formerly Altera) | Intel | Intel | Intel | Intel | Intel |
| Package | 672-ball FineLine BGA | 672-ball FineLine BGA - same | 672-ball FineLine BGA - same | 672-ball FineLine BGA - same | 672-ball FineLine BGA - same | 672-ball FineLine BGA - same |
| System Gates | 300,000 | 300,000 | 300,000 | 300,000 | 300,000 | 300,000 |
| Logic Elements | 11,520 | 11,520 | 11,520 | 11,520 | 11,520 | 11,520 |
| Embedded Memory | 147,456 bits | 147,456 bits | 147,456 bits | 147,456 bits | 147,456 bits | 147,456 bits |
| User I/Os | 408 | 408 | 408 | 408 | 408 | 408 |
| Operating Temperature | -40 to +85 C (industrial) | -40 to +85 C (industrial) | 0 to +85 C (commercial) | 0 to +85 C (commercial) | 0 to +85 C (commercial) | 0 to +85 C (commercial) |
| Speed Grade | -2X (enhanced) | -2X (enhanced) | -2X (enhanced) | -2X (enhanced) | -2 (standard) | -1 (slowest) |
주요 차별점
- Industrial temperature range (-40 to +85 C) with identical die to commercial variant (vs EP20K300EFC672-2X)
- Enhanced -2X speed grade (highest in APEX 20KE family) (vs EP20K300EFC672-2)
- SnPb (tin-lead) ball finish available for legacy assembly processes (vs EP20K300EFI672-2N)
설계 노트
Estimated: the 672-ball FineLine BGA package dissipates up to approximately 4-5 W at full utilization (estimated based on APEX 20KE family typical power of 50 µA/MHz quiescent plus switching). With the 27x27 mm package body and no exposed metal top, design adequate forced-air cooling or attach a small heatsink via thermal epoxy to the package top for continuous full-gate utilization. Always verify against the APEX 20KE datasheet thermal resistance table and derate per application note AN 74.
The 672-ball FineLine BGA uses a 1.27 mm ball pitch with a 27x27 array minus depopulated center rows. PCB design requires 4-6 layer stackup with microvia or via-in-pad technology for clean signal breakout. All signal layers beneath the BGA must be reference planes (VCC or GND) for proper impedance control and power delivery; non-functional inner pads are required per IPC-7351 for BGA ball retention. Recommend ENIG or ENEPIG surface finish and 0.20-0.25 mm NSMD pads for reliable assembly.
Estimated: configure-mode pinstrapping (MSEL0-3) must match the desired configuration scheme (PS, AS, JTAG) at power-up; incorrect strapping prevents configuration. The EPC2 or EPC16 configuration device must be sized appropriately for the 300K-gate bitstream (typically 4-6 Mbit). Decouple each VCCINT (1.8 V) and VCCIO bank with 0.1 µF ceramic capacitors placed as close as possible to the package - estimate at least 8-12 capacitors per supply rail based on APEX 20KE decoupling guidelines.
The APEX 20KE supports LVTTL, LVCMOS, PCI, SSTL, and LVDS I/O standards depending on bank configuration. For high-speed LVDS interfaces above 200 Mbps, route differential pairs with 100 Ω differential impedance and maintain length matching within 0.13 mm. Reference per-bank VCCIO pins must each be decoupled individually; mixing I/O standards within a bank without proper VCCIO selection is a common source of configuration failure and signal-integrity issues per the APEX 20KE handbook.
규정 준수 정보
EP20K300EFI672-2X uses SnPb (tin-lead) ball finish per the -2X (non-N) ordering code, indicating non-RoHS terminal finish. For RoHS-compliant designs choose the EP20K300EFI672-2N (lead-free) variant. Compliance status not explicitly stated in verified distributor data.