EP4CE10F17I7 - 10K Logic FPGA, FBGA-256 | Altera
부품 번호: EP4CE10F17I7 ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
EP4CE10F17I7 개요
A Cyclone IV E FPGA is a programmable semiconductor in the FPGA family of digital integrated circuits. Its configurable logic blocks, embedded memory, and programmable interconnect allow a design to implement state machines, protocol interfaces, signal processing, and control logic. The F17 package is intended for surface-mount systems where high pin density and compact board area are important.
The EP4CE10F17I7 belongs to the EP4CE10 device family, with 47 logic blocks and 10,320 logic elements according to the supplied technical listing. Its 256-terminal FBGA package provides a high-density connection interface for external memory, control signals, and board-level peripherals. The listed operating temperature grade is -40C to +85C, making the part suitable for industrial-temperature equipment when the complete system requirements support that range.
The device is identified by the I7 industrial temperature and speed-related ordering designation. Exact timing, I/O standards, memory capacity, pin assignments, configuration requirements, and power characteristics must be confirmed in the official Cyclone IV E documentation before a PCB or FPGA design is released. Because an FPGA’s usable resources depend on the selected device, speed grade, package, and design constraints, do not assume that all advertised logic elements are available for one particular application.
Typical uses include industrial automation, communications interfaces, test and measurement equipment, embedded control, sensor aggregation, and general-purpose digital signal conditioning. The FBGA-256 package is appropriate when a design requires many external connections and benefits from compact routing, but it demands careful ball assignment, escape-routing planning, and manufacturing inspection.
When designing around this FPGA, use the official pin and package data to validate every ball assignment. Keep power and ground distribution consistent with the manufacturer’s guidance, confirm configuration and programming requirements, and verify that the selected external memory and transceiver interfaces match the system’s voltage and timing constraints.
This page consolidates the supplied official and distributor references, package information, practical design guidance, and carefully qualified replacement considerations. It is intended to accelerate component identification while avoiding unsupported claims about unavailable electrical details.
드롭인 대체품: EP4CE10F17I7 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EP4CE10F17I7 (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EP4CE10F17I7N
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EP4CE10F17C8N
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$17.95 / 개
데이터시트 보기 →EP4CE10F17C7
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
EP4CE10F17I8
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
EP4CE10F17I7
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →EP4CE10F17I7 최대 정격 & 전기적 특성
| Device Type | Field Programmable Gate Array (FPGA) |
| FPGA Family | Cyclone IV E |
| Device Variant | EP4CE10 (F17) |
| Logic Cells / Logic Elements | 47 logic blocks; 10,320 logic elements |
| Package Type | FBGA-256 |
| Terminal Count | 256 terminals |
| 공급 전압 | 1.2 V |
| 동작 온도 | -40C to +85C |
| 장착 스타일 | Surface mount |
| Package Pitch | 1.0 mm |
| Terminal Form | Ball |
| Manufacturer | Intel / Altera |
| 수명 주기 상태 | Not verified |
| RoHS Compliance | Not verified in supplied data |
| REACH Compliance | Not verified in supplied data |
| Automotive Qualification | Not verified in supplied data |
EP4CE10F17I7 1.0 mm 핀 구성 가이드
EP4CE10F17I7(1.0 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EP4CE10F17I7.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EP4CE10F17I7 적합 용도: 6 애플리케이션s: Industrial Automation Controller, Communications Interface Bridge, Test and Measurement Equipment, Embedded Sensor Aggregation, Programmable Digital Logic Platform, Data Acquisition Control.
Industrial Automation Controller
The EP4CE10F17I7 is suitable for an industrial automation controller when the design needs programmable digital logic, many external connections, and a compact surface-mount footprint. Its 10,320 logic elements can support control state machines, interlocks, communication formatting, and I/O logic, while the 256-terminal FBGA-256 package provides a high-density routing interface. The listed -40C to +85C operating range is appropriate for industrial-temperature equipment, but designers must verify timing, I/O standards, power rails, and industrial qualification requirements in the official documentation.
추천
Communications Interface Bridge
Use EP4CE10F17I7 as a configurable communications interface when a board must translate between parallel logic, buffering, framing, and protocol-specific control. The FPGA’s programmable logic can accommodate multiple interface states and timing constraints without requiring a fixed application-specific ASIC. Its 256-terminal package supports dense connections to transceivers, memories, and control logic, although the supplied data does not verify specific transceiver standards, differential I/O ratings, or protocol accelerators. Validate all interface requirements against the manufacturer datasheet.
추천
Test and Measurement Equipment
The EP4CE10F17I7 can fit programmable test and measurement front ends where timing, acquisition control, pattern generation, and data routing benefit from FPGA parallelism. The 10,320 logic elements provide a defined resource budget for digital control and processing logic, while the FBGA-256 package accommodates high-density connections to converters, memories, and trigger circuits. Designers should verify supported I/O voltages, acquisition rates, clocking resources, and timing margins because these values are not supplied in the verified search data.
추천
Embedded Sensor Aggregation
EP4CE10F17I7 is useful for aggregating inputs from sensors and transducers into a digital control stream. FPGA logic can perform filtering, thresholding, event sequencing, and communication packing in parallel, while the high-density package supports connections to sensor interfaces and memory. The verified data does not specify analog inputs, sensor interfaces, or I/O voltage levels, so the device is suitable only when the chosen sensor path uses compatible digital interfaces and the complete board satisfies power and signal-integrity requirements.
추천
Programmable Digital Logic Platform
The EP4CE10F17I7 is appropriate for a general-purpose programmable logic platform used to consolidate multiple digital functions such as state machines, counters, data buffers, and control interfaces. Its 10,320 logic elements allow design partitioning across multiple functions, while the 256-terminal package provides a large pin budget for board integration. Resource allocation, routing congestion, and timing closure must be evaluated in the FPGA design tool because actual utilization depends on the selected architecture and constraints.
추천
Data Acquisition Control
The EP4CE10F17I7 can coordinate data-acquisition systems by generating converter timing, sequencing control signals, digital filtering, and interface transactions. FPGA parallelism is useful when the system must combine deterministic control with flexible data routing. The verified information confirms the FPGA family, package, logic-element count, supply voltage, and operating temperature, but does not confirm PLL resources, memory capacity, or specific acquisition timing. Those items must be checked before selecting the part for a precision converter interface.
추천
추천 제품 요약
엔지니어링 참조 데이터: EP4CE10F17I7 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EP4CE10F17I7N | EP4CE10F17C8 | EP4CE10F17C7 | EP4CE10F17I8 |
|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera |
| Package | FBGA-256 | FBGA-256 | FBGA-256 | FBGA-256 | FBGA-256 |
| Device Type | Cyclone IV E FPGA | Cyclone IV E FPGA | Cyclone IV E FPGA | Cyclone IV E FPGA | Cyclone IV E FPGA |
| Drop-In Verification | Target device | Requires manufacturer confirmation | Requires manufacturer confirmation | Requires manufacturer confirmation | Requires manufacturer confirmation |
주요 차별점
- EP4CE10F17I7 device identity and package (vs EP4CE10F17I7N)
- Verified logic-resource baseline (vs EP4CE10F17C8)
- Verified industrial temperature listing (vs EP4CE10F17C7)
- High-density 256-terminal FBGA integration (vs EP4CE10F17I8)
설계 노트
FPBGA-256 assembly requires escape routing, fine-pitch design rules, and package-specific ball mapping. Use the official F17 package drawing and pin-assignment data before placing the footprint. Pay particular attention to power and ground balls, decoupling locations, and routing between the FPGA, memories, clock sources, and external interfaces.
The supplied data confirms a 1.2 V supply but does not provide current limits, rail sequencing, auxiliary voltages, or power-consumption figures. Follow the official Cyclone IV E power-supply recommendations, including the required decoupling network and sequencing. Estimated power must be obtained from the actual FPGA utilization report rather than inferred from supply voltage alone.
Keep clock inputs, configuration signals, and high-speed interfaces away from noisy switching paths where practical. Route power and ground planes continuously, use multiple connection points where the package guidance permits, and validate high-speed signals with the complete stack-up and I/O constraints. FBGA escape routing can materially affect signal integrity and assembly yield.
Do not treat an EP4CE10 family member with a similar suffix as a confirmed drop-in replacement without checking the exact orderable part number, package, temperature grade, speed grade, timing, I/O limits, and configuration behavior. Also avoid assuming that the 10,320 logic elements are all usable for one design; routing, memory, clock, and dedicated-function constraints affect capacity.
규정 준수 정보
The supplied manufacturer and distributor search results do not explicitly provide verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements for EP4CE10F17I7. Confirm these claims on the current manufacturer product documentation or declaration.
