EP910LC44-30T - 24-Macrocell CMOS EPLD, 33ns, PQCC-44 | Altera
부품 번호: EP910LC44-30T ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $18.5 | $18.50 |
| 10 | $16.2 | $162.00 |
| 100 | $13.85 | $1,385.00 |
| 500 | $11.4 | $5,700.00 |
| 1,000 | $9.75 | $9,750.00 |
EP910LC44-30T 개요
A CMOS Erasable Programmable Logic Device (EPLD) is a non-volatile programmable logic IC that combines the architectural simplicity of PAL-type logic arrays with erasable programming. EPLDs sit in the programmable logic hierarchy between simple PAL/GAL devices and modern CPLDs/FPGAs: EPLD -> PLD -> programmable logic -> logic IC -> semiconductor. They retain the programming on-chip even when powered down, which makes them useful for bootstrap configuration and legacy system replacement.
Key features include 12 dedicated inputs, 24 bidirectional I/O lines, and 2 external clock inputs that drive internal registers. The device supports a nominal 5V supply (4.75V to 5.25V) and offers 33ns pin-to-pin propagation delay (tPD) suitable for bus-interface and address-decoding tasks. It is built on advanced CMOS technology for low static power consumption and includes a programmable security bit to protect user logic from unauthorized readback. The PQCC-44 J-lead surface-mount package provides robust mechanical attachment and is rated for the commercial temperature grade.
The EP910LC44-30T uses a sum-of-products macrocell architecture: each macrocell contains a programmable AND array feeding an OR gate with a configurable flip-flop, allowing combinational or registered output. The 240 product terms feed the 24 macrocells via a global interconnect, and the device supports asynchronous clear, synchronous preset, and output enable control. Together with the erasable windowed package option in the family, this architecture enables iterative design and field reprogramming.
Typical applications include TTL/CMOS logic replacement, random-logic consolidation, address decoding for memory and peripheral buses, bus-multiplexing glue logic, and state-machine implementation in industrial control, telecom, and instrumentation equipment. The 33ns tPD also supports fairly high-speed control-plane paths in legacy 5V designs.
When designing with this device, observe the 5V supply tolerance (4.75V to 5.25V) and add a 0.1uF decoupling capacitor close to each VCC pin to suppress switching transients on the parallel macrocell outputs.
This page synthesizes distributor pricing, drop-in Altera/Intel Classic EPLD family alternatives, and practical design notes not found in the manufacturer datasheet alone.
드롭인 대체품: EP910LC44-30T — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EP910LC44-30T (동일 폼 팩터 및 풋프린트) — 차이점: Package, Supply Voltage (VCC), Propagation Delay (tPD), Programming Method, Mounting Type.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EP910LC44-30
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EP910LC44-25
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EP910LC44
✅ 드롭인✓ 재고 있음
$8.95 / 개
데이터시트 보기 →EP910LC30T
✅ 드롭인✓ 재고 있음
$9.75 / 개
데이터시트 보기 →EP910LC-30T
✅ 드롭인✓ 재고 있음
$7.1 / 개
데이터시트 보기 →EP910LC44-30T 최대 정격 & 전기적 특성
| Device Family | Classic EPLD |
| Logic Type | PAL-type CMOS EPLD (OT PLD) |
| Macrocells | 24 |
| Product Terms | 240 |
| Propagation Delay (tPD) | 33 ns |
| Supply Voltage (VCC) | 4.75 V to 5.25 V (nominal 5 V) |
| Dedicated Inputs | 12 |
| I/O Lines | 24 (bidirectional) |
| Total Inputs | 36 |
| Total Outputs | 24 |
| External Clock Inputs | 2 |
| Programming Technology | CMOS, UV-erasable (windowed package in family) |
| Security Bit | Programmable (logic readback protection) |
| Operating Temperature Grade | Commercial |
| 패키지 | PQCC-44 (Plastic Leaded Chip Carrier, J-bend) |
| Terminal Form | J-BEND |
| Package Code | QCCJ |
| 실장 유형 | Surface Mount |
EP910LC44-30T 핀 구성
| 핀 1 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 2 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 3 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 4 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 5 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 6 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 7 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 8 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 9 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 10 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 11 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 12 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 13 | GND — Ground |
| 핀 14 | INPUT — Dedicated input |
| 핀 15 | INPUT — Dedicated input |
| 핀 16 | INPUT — Dedicated input |
| 핀 17 | INPUT — Dedicated input |
| 핀 18 | INPUT — Dedicated input |
| 핀 19 | INPUT — Dedicated input |
| 핀 20 | INPUT — Dedicated input |
| 핀 21 | INPUT — Dedicated input |
| 핀 22 | INPUT — Dedicated input |
| 핀 23 | INPUT — Dedicated input |
| 핀 24 | INPUT — Dedicated input |
| 핀 25 | CLK2 — External clock input 2 |
| 핀 26 | CLK1 — External clock input 1 |
| 핀 27 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 28 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 29 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 30 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 31 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 32 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 33 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 34 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 35 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 36 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 37 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 38 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 39 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 40 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 41 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 42 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 43 | VCC — +5V supply voltage |
| 핀 44 | I/O — Bidirectional I/O pin (macrocell) |
일반적인 애플리케이션
EP910LC44-30T 적합 용도: 6 애플리케이션s: Address Decoding for Memory and Peripheral Buses, TTL/CMOS Glue Logic Replacement, State Machine Implementation, Bus Multiplexing and Signal Routing, Legacy Industrial Control Replacement, Instrumentation Front-Panel Logic.
Address Decoding for Memory and Peripheral Buses
The EP910LC44-30T's 24 macrocells and 240 product terms make it well-suited for address-decoding logic between a microprocessor and memory/peripheral devices. Its 33ns tPD easily meets the setup-time requirements of legacy 8-bit and 16-bit buses such as 8086, 68k, and Z80, where chip-select signals must be generated within a single clock cycle. The 24 I/O lines can be allocated to a mix of address inputs (up to 24 lines) and chip-select outputs, eliminating multiple 74LS/74HC TTL decoder packages on the board. Designers typically instantiate one macrocell per chip-select, with the remaining macrocells handling wait-state generation or bus-acknowledge logic. The 5V supply and CMOS low-power design also keep the decoder section below 100 mW typical dissipation.
추천
TTL/CMOS Glue Logic Replacement
The EP910LC44-30T consolidates dozens of discrete 74LS, 74HC, and 74F TTL gates into a single 24-macrocell device, reducing board area and improving reliability in legacy 5V systems. Its 5V CMOS I/O is directly TTL-compatible, so input pins can be driven by 5V TTL outputs without level shifters. The PAL-type sum-of-products architecture maps cleanly to SOP logic equations, allowing direct translation of existing TTL schematics. With 240 product terms available, designers can implement wide AND-OR structures that would otherwise require cascaded TTL gates. The PQCC-44 package occupies roughly the same board area as 4-6 SOIC-14 TTL packages, providing 4x-6x logic-density improvement on the same PCB.
추천
State Machine Implementation
The EP910LC44-30T's macrocell flip-flops, combined with two dedicated clock inputs, support Moore and Mealy state machines with up to 24 states. Each macrocell's flip-flop provides asynchronous clear and synchronous preset, which are essential for safe power-on initialization in industrial controllers. The 33ns tPD plus flip-flop setup time fits comfortably inside one clock period for clock frequencies up to approximately 15 MHz in 5V systems. Designers commonly use this EPLD for vending-machine controllers, instrument front-panel sequencers, and printer paper-path controllers, where the program can be UV-erased and updated between design revisions without re-spinning the PCB.
추천
Bus Multiplexing and Signal Routing
The EP910LC44-30T handles 8-bit and 16-bit bus multiplexing, bus-switching, and signal-routing tasks by mapping data-path control logic into its macrocell array. Its 24 bidirectional I/O lines can be configured as inputs or outputs per pin, supporting bidirectional bus buffers and time-multiplexed address/data buses. With 5V CMOS I/O tolerance, the device can directly interface with 5V transceivers, memory devices, and microcontrollers. The 33ns propagation delay ensures that routed signals meet the hold-time requirements of downstream latches. Common uses include address/data demultiplexing for 8085-style buses, peripheral chip-select steering, and interrupt-priority encoders.
추천
Legacy Industrial Control Replacement
The EP910LC44-30T is widely used to replace obsolete 74-series and discrete-logic boards in legacy industrial controllers, programmable logic controllers, and process-control instruments. Its CMOS low-power design (typically under 100 mW) keeps thermal stress low inside sealed control cabinets, while the PQCC-44 J-lead package survives industrial shock and vibration better than older DIP-packaged PALs. With 5V supply tolerance matching original TTL power rails, the part can be retrofitted onto existing PCBs without power-supply redesign. The erasable programming window (on windowed package variants in the family) allows field updates when control algorithms change.
추천
Instrumentation Front-Panel Logic
The EP910LC44-30T implements front-panel scanning, key-debounce, and display-multiplexing logic in test-and-measurement instruments such as oscilloscopes, signal generators, and bench multimeters. Its 24 I/O lines support 7-segment or 14-segment display multiplexing, rotary-encoder decoding, and push-button keypads up to 4x4. The two dedicated clock inputs allow one clock for display multiplexing and a second for keypad scanning, eliminating external timer ICs. The 33ns tPD keeps display-flicker artifacts below human perception thresholds when refresh rates are set above 60 Hz.
추천
추천 제품 요약
엔지니어링 참조 데이터: EP910LC44-30T — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EP910LC44-30 | EP910LC44-25 | EP910LC44 | EP910LC30T | EP910LC-30T |
|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | PQCC-44 (QCCJ, J-bend) | PQCC-44 - same | PQCC-44 - same | PQCC-44 - same | PQCC-44 - same | PQCC-44 - same |
| Macrocells | 24 | 24 | 24 | 24 | 24 | 24 |
| Product Terms | 240 | 240 | 240 | 240 | 240 | 240 |
| Supply Voltage | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V |
| Dedicated Inputs | 12 | 12 | 12 | 12 | 12 | 12 |
| I/O Lines | 24 | 24 | 24 | 24 | 24 | 24 |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
| Pin-to-Pin Compatible | Yes (reference) | Yes - drop-in | Yes - drop-in | Yes - drop-in | Yes - drop-in | Yes - drop-in |
주요 차별점
- Highest-density 5V EPLD in PQCC-44 with 24 macrocells (vs EP610PC-25)
- Faster 25ns speed grade available in same package (vs EP910LC44-25)
- Two dedicated clock inputs for multi-clock designs (vs EP610 family EPLDs)
설계 노트
The EP910LC44-30T operates from a single 4.75V to 5.25V supply. Place a 0.1uF ceramic decoupling capacitor as close as possible to the VCC pin (pin 43) and a bulk 10uF tantalum or aluminum capacitor near the supply trace. CMOS switching currents can produce significant VCC droop during simultaneous macrocell transitions, so keep the VCC trace short and wide (at least 0.5 mm). Adding a ferrite bead between the EPLD VCC pin and the upstream regulator improves noise margin on the 5V rail.
The PQCC-44 (J-bend, QCCJ) package requires careful PCB land-pattern design: pad width should be 0.6 mm with 1.0 mm pitch. Use NSMD (non-solder-mask-defined) pads for better solder-joint reliability under thermal cycling. Keep all signal traces at least 0.2 mm away from package edges to avoid solder bridging, and route high-speed clock signals (CLK1, CLK2) on the inner PCB layers with grounded reference planes to control impedance.
Do not drive EPLD input pins with voltages above 5.5V - the Classic EPLD family is not 5V-tolerant beyond absolute-maximum ratings, and over-voltage can permanently damage the CMOS input structures. Also, unused dedicated inputs must be tied to VCC or GND (never left floating) to prevent oscillation and extra ICC current. The erasable windowed package variants must be shielded from ambient UV light in field installations to prevent inadvertent erasure.
규정 준수 정보
Compliance status not specified in verified data; classic EPLD family was originally designed for 5V commercial systems. Lifecycle status: obsolete. RoHS/REACH versions not separately listed in the verified data; refer to manufacturer datasheet for specific compliance markings on current factory stock.
