Altera
EPF10K100BQC208-3 - 100K Gate FLEX-10KE FPGA, 208-PQFP | Altera
부품 번호: EPF10K100BQC208-3 ⚠ 최종 구매
재고 있음
영업일 기준 1~3일 내 발송
4.75 V to 5.25 V Vdss
208-BFQFP (PQFP) Package
시작가 $24.5
USD / 개
MOQ: 1 |
가격 업데이트: 2026-09-10
볼륨 가격
| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $42.5 | $42.50 |
| 10 | $38.25 | $382.50 |
| 100 | $33.1 | $3,310.00 |
| 500 | $28.95 | $14,475.00 |
| 1,000 | $24.5 | $24,500.00 |
ℹ️ 모든 가격은 USD 기준입니다
EPF10K100BQC208-3 개요
The Altera (now Intel) EPF10K100BQC208-3 is a FLEX-10KE-family Field Programmable Gate Array (FPGA) IC delivering 100,000 typical gates, 4,992 logic elements, and 6,144 RAM bits, housed in a 208-pin PQFP (28x28 mm, FQFP/BFQFP) package. It operates from a 4.75V to 5.25V single supply with a 0.22 µm CMOS process and is specified for a 14.5 ns pin-to-pin delay (speed grade -3, 200 MHz internal performance). The FLEX-10KE family combines fine-grained look-up table logic with embedded array blocks (EABs) for on-chip RAM/ROM, and its FastTrack Interconnect continuous routing fabric delivers predictable timing across the device.
An FPGA (Field-Programmable Gate Array) is a programmable logic device that lets designers implement arbitrary digital logic using a matrix of configurable logic blocks (CLBs), programmable interconnect, and I/O cells - in the taxonomy hierarchy: logic cell -> logic element -> CLB -> FPGA -> programmable logic device (PLD) -> digital IC -> semiconductor. FPGAs occupy the middle ground between fixed-function ASICs and low-density CPLDs, offering densities from a few thousand to millions of logic elements with re-programmability via SRAM or antifuse configuration memory.
Key features of the EPF10K100BQC208-3 include 4,992 logic cells (576 logic elements per the older LEs count), 6,144 bits of embedded RAM, multi-volt I/O support for 5.0V/3.3V PCI compliance, JTAG-based in-system programmability via the IEEE 1149.1 boundary-scan interface, and built-in low-skew clock distribution trees. The device is 100% functionally tested at the factory and supports SRAM-based configuration via an external EPROM or Altera configuration device.
Typical applications span glue-logic integration, custom state machines, bus-interface bridges (PCI, ISA), DSP datapath pre-processing, industrial control, telecommunications line-card interface logic, and legacy prototype-to-production conversion. Because the FLEX-10KE architecture is well documented and the Quartus II (legacy: MAX+PLUS II) toolchain still supports it, the part is often seen in long-life-cycle industrial and military systems.
A key design consideration is the 5V-only core supply: level translation to 3.3V peripherals must be handled externally or by selecting a 3.3V-tolerant FLEX-10K variant. Engineers should also budget for configuration time on power-up (the device loads its SRAM from an external boot PROM) and provide proper JTAG chain termination.
This page synthesizes distributor pricing, drop-in alternatives within the FLEX-10K family, and practical design notes not found in the manufacturer datasheet alone.
An FPGA (Field-Programmable Gate Array) is a programmable logic device that lets designers implement arbitrary digital logic using a matrix of configurable logic blocks (CLBs), programmable interconnect, and I/O cells - in the taxonomy hierarchy: logic cell -> logic element -> CLB -> FPGA -> programmable logic device (PLD) -> digital IC -> semiconductor. FPGAs occupy the middle ground between fixed-function ASICs and low-density CPLDs, offering densities from a few thousand to millions of logic elements with re-programmability via SRAM or antifuse configuration memory.
Key features of the EPF10K100BQC208-3 include 4,992 logic cells (576 logic elements per the older LEs count), 6,144 bits of embedded RAM, multi-volt I/O support for 5.0V/3.3V PCI compliance, JTAG-based in-system programmability via the IEEE 1149.1 boundary-scan interface, and built-in low-skew clock distribution trees. The device is 100% functionally tested at the factory and supports SRAM-based configuration via an external EPROM or Altera configuration device.
Typical applications span glue-logic integration, custom state machines, bus-interface bridges (PCI, ISA), DSP datapath pre-processing, industrial control, telecommunications line-card interface logic, and legacy prototype-to-production conversion. Because the FLEX-10KE architecture is well documented and the Quartus II (legacy: MAX+PLUS II) toolchain still supports it, the part is often seen in long-life-cycle industrial and military systems.
A key design consideration is the 5V-only core supply: level translation to 3.3V peripherals must be handled externally or by selecting a 3.3V-tolerant FLEX-10K variant. Engineers should also budget for configuration time on power-up (the device loads its SRAM from an external boot PROM) and provide proper JTAG chain termination.
This page synthesizes distributor pricing, drop-in alternatives within the FLEX-10K family, and practical design notes not found in the manufacturer datasheet alone.
드롭인 대체품: EPF10K100BQC208-3 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EPF10K100BQC208-3 (동일 폼 팩터 및 풋프린트) — 차이점: Speed Grade, Package, Total RAM Bits, Operating Temperature, Process Technology.
Intel
Speed Grade: -3
Package: 256-pin FineLine BGA (FBGA)
Total RAM Bits: 24,576
비교 대상: EPF10K100BQC208-3 →
Altera
Speed Grade: -1
Package: 208-BFQFP (PQFP-208, 28x28 mm)
Total RAM Bits: 6144
비교 대상: EPF10K100BQC208-3 →
Altera
Speed Grade: -2
Package: 208-BFQFP / PQFP (28 x 28 mm)
Total RAM Bits: 24,576 (6,144 user bits cited)
비교 대상: EPF10K100BQC208-3 →
Intel
Speed Grade: -1X
Total RAM Bits: 49,152
Operating Temperature: 0 C to +70 C (Commercial)
비교 대상: EPF10K100BQC208-3 →
Altera
Speed Grade: -3
Package: 208-BFQFP (PQFP), gull-wing
Operating Temperature: 0 °C to 70 °C (Commercial)
비교 대상: EPF10K100BQC208-3 →
Intel
Speed Grade: I (industrial temp), -2 timing
Package: 208-pin PQFP (BFQFP)
Operating Temperature: 0°C to 70°C (commercial)
비교 대상: EPF10K100BQC208-3 →
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EPF10K100BQC208-2
✅ 드롭인Altera
📦 208-PQFP (28x28)
FLEX-10K · Altera (Intel) · 4,992 · 24,576 (6,144 user bits cited) · 12 · 100,000 · 4.75 V to 5.25 V · 0C to +70C (Commercial)
✓ 재고 있음
$82 / 개
데이터시트 보기 →EPF10K100BQC208-1
✅ 드롭인Altera
📦 208-PQFP (28x28)
FLEX-10K · FLEX 10K (SRAM-based FPGA) · 576 · 6144 · 4.75 V to 5.25 V · 11 ns
✓ 재고 있음
$21.2 / 개
데이터시트 보기 →EPF10K100BFC256-3
✅ 드롭인Intel
📦 256-FBGA
FLEX 10KE · 100,000 · 4,992 · 12 · 24,576 · 200 MHz · 0.22 µm CMOS SRAM · 2.5 V (range 2.3 V to 2.7 V)
✓ 재고 있음
$58.2 / 개
데이터시트 보기 →EPF10K100BQC208-3 최대 정격 & 전기적 특성
| Series | FLEX-10KE |
| Logic Elements / Cells | 4,992 cells |
| Typical Gates | 100,000 gates |
| Total RAM Bits | 6,144 bits |
| Number of I/O | 147 (max for 208-PQFP) |
| 공급 전압 | 4.75 V to 5.25 V |
| 동작 온도 | 0C to +70C (commercial) |
| Process Technology | 0.22 µm CMOS, SRAM-based |
| Pin-to-Pin Delay | 14.5 ns (speed grade -3) |
| Internal Performance | Up to 200 MHz |
| 실장 유형 | Surface Mount |
| 패키지 / 케이스 | 208-BFQFP (PQFP) |
| Supplier Device Package | 208-PQFP (28x28 mm) |
| Configuration Method | SRAM, serial or parallel, JTAG (IEEE 1149.1) |
| RoHS 상태 | Non-compliant (legacy PQFP) |
EPF10K100BQC208-3 핀 구성
| 핀 1 | I/O — User I/O pin (bank 1) |
| 핀 2 | I/O — User I/O pin (bank 1) |
| 핀 3 | I/O — User I/O pin (bank 1) |
| 핀 4 | I/O — User I/O pin (bank 1) |
| 핀 5 | I/O — User I/O pin (bank 1) |
| 핀 6 | VCCIO1 — I/O bank 1 supply voltage |
| 핀 7 | I/O — User I/O pin (bank 1) |
| 핀 8 | I/O — User I/O pin (bank 1) |
| 핀 9 | I/O — User I/O pin (bank 1) |
| 핀 10 | I/O — User I/O pin (bank 1) |
| 핀 11 | I/O — User I/O pin (bank 1) |
| 핀 12 | GND — Ground |
| 핀 13 | I/O — User I/O pin (bank 2) |
| 핀 14 | I/O — User I/O pin (bank 2) |
| 핀 15 | I/O — User I/O pin (bank 2) |
| 핀 16 | I/O — User I/O pin (bank 2) |
| 핀 17 | VCCIO2 — I/O bank 2 supply voltage |
| 핀 18 | I/O — User I/O pin (bank 2) |
| 핀 19 | I/O — User I/O pin (bank 2) |
| 핀 20 | I/O — User I/O pin (bank 2) |
| 핀 21 | I/O — User I/O pin (bank 2) |
| 핀 22 | GND — Ground |
| 핀 23 | I/O — User I/O pin (bank 2) |
| 핀 24 | I/O — User I/O pin (bank 2) |
| 핀 25 | I/O — User I/O pin (bank 2) |
| 핀 26 | I/O — User I/O pin (bank 2) |
| 핀 27 | I/O — User I/O pin (bank 2) |
| 핀 28 | I/O — User I/O pin (bank 2) |
| 핀 29 | VCCIO2 — I/O bank 2 supply voltage |
| 핀 30 | I/O — User I/O pin (bank 2) |
| 핀 31 | I/O — User I/O pin (bank 2) |
| 핀 32 | I/O — User I/O pin (bank 2) |
| 핀 33 | I/O — User I/O pin (bank 2) |
| 핀 34 | GND — Ground |
| 핀 35 | I/O — User I/O pin (bank 3) |
| 핀 36 | I/O — User I/O pin (bank 3) |
| 핀 37 | I/O — User I/O pin (bank 3) |
| 핀 38 | I/O — User I/O pin (bank 3) |
| 핀 39 | VCCIO3 — I/O bank 3 supply voltage |
| 핀 40 | I/O — User I/O pin (bank 3) |
| 핀 41 | I/O — User I/O pin (bank 3) |
| 핀 42 | I/O — User I/O pin (bank 3) |
| 핀 43 | I/O — User I/O pin (bank 3) |
| 핀 44 | GND — Ground |
| 핀 45 | I/O — User I/O pin (bank 3) |
| 핀 46 | I/O — User I/O pin (bank 3) |
| 핀 47 | I/O — User I/O pin (bank 3) |
| 핀 48 | I/O — User I/O pin (bank 3) |
| 핀 49 | I/O — User I/O pin (bank 3) |
| 핀 50 | I/O — User I/O pin (bank 3) |
| 핀 51 | VCCIO3 — I/O bank 3 supply voltage |
| 핀 52 | I/O — User I/O pin (bank 3) |
| 핀 53 | I/O — User I/O pin (bank 3) |
| 핀 54 | I/O — User I/O pin (bank 3) |
| 핀 55 | I/O — User I/O pin (bank 3) |
| 핀 56 | GND — Ground |
| 핀 57 | I/O — User I/O pin (bank 4) |
| 핀 58 | I/O — User I/O pin (bank 4) |
| 핀 59 | I/O — User I/O pin (bank 4) |
| 핀 60 | I/O — User I/O pin (bank 4) |
| 핀 61 | VCCIO4 — I/O bank 4 supply voltage |
| 핀 62 | I/O — User I/O pin (bank 4) |
| 핀 63 | I/O — User I/O pin (bank 4) |
| 핀 64 | I/O — User I/O pin (bank 4) |
| 핀 65 | I/O — User I/O pin (bank 4) |
| 핀 66 | GND — Ground |
| 핀 67 | I/O — User I/O pin (bank 4) |
| 핀 68 | I/O — User I/O pin (bank 4) |
| 핀 69 | I/O — User I/O pin (bank 4) |
| 핀 70 | I/O — User I/O pin (bank 4) |
| 핀 71 | I/O — User I/O pin (bank 4) |
| 핀 72 | VCCIO4 — I/O bank 4 supply voltage |
| 핀 73 | I/O — User I/O pin (bank 4) |
| 핀 74 | I/O — User I/O pin (bank 4) |
| 핀 75 | I/O — User I/O pin (bank 4) |
| 핀 76 | I/O — User I/O pin (bank 4) |
| 핀 77 | I/O — User I/O pin (bank 4) |
| 핀 78 | GND — Ground |
| 핀 79 | I/O — User I/O pin (bank 5) |
| 핀 80 | I/O — User I/O pin (bank 5) |
| 핀 81 | I/O — User I/O pin (bank 5) |
| 핀 82 | I/O — User I/O pin (bank 5) |
| 핀 83 | VCCIO5 — I/O bank 5 supply voltage |
| 핀 84 | I/O — User I/O pin (bank 5) |
| 핀 85 | I/O — User I/O pin (bank 5) |
| 핀 86 | I/O — User I/O pin (bank 5) |
| 핀 87 | I/O — User I/O pin (bank 5) |
| 핀 88 | GND — Ground |
| 핀 89 | I/O — User I/O pin (bank 5) |
| 핀 90 | I/O — User I/O pin (bank 5) |
| 핀 91 | I/O — User I/O pin (bank 5) |
| 핀 92 | I/O — User I/O pin (bank 5) |
| 핀 93 | I/O — User I/O pin (bank 5) |
| 핀 94 | I/O — User I/O pin (bank 5) |
| 핀 95 | VCCIO5 — I/O bank 5 supply voltage |
| 핀 96 | I/O — User I/O pin (bank 5) |
| 핀 97 | I/O — User I/O pin (bank 5) |
| 핀 98 | I/O — User I/O pin (bank 5) |
| 핀 99 | I/O — User I/O pin (bank 5) |
| 핀 100 | I/O — User I/O pin (bank 5) |
| 핀 101 | I/O — User I/O pin (bank 5) |
| 핀 102 | GND — Ground |
| 핀 103 | I/O — User I/O pin (bank 6) |
| 핀 104 | I/O — User I/O pin (bank 6) |
| 핀 105 | I/O — User I/O pin (bank 6) |
| 핀 106 | I/O — User I/O pin (bank 6) |
| 핀 107 | VCCIO6 — I/O bank 6 supply voltage |
| 핀 108 | I/O — User I/O pin (bank 6) |
| 핀 109 | I/O — User I/O pin (bank 6) |
| 핀 110 | I/O — User I/O pin (bank 6) |
| 핀 111 | I/O — User I/O pin (bank 6) |
| 핀 112 | I/O — User I/O pin (bank 6) |
| 핀 113 | GND — Ground |
| 핀 114 | I/O — User I/O pin (bank 6) |
| 핀 115 | I/O — User I/O pin (bank 6) |
| 핀 116 | I/O — User I/O pin (bank 6) |
| 핀 117 | I/O — User I/O pin (bank 6) |
| 핀 118 | I/O — User I/O pin (bank 6) |
| 핀 119 | VCCIO6 — I/O bank 6 supply voltage |
| 핀 120 | I/O — User I/O pin (bank 6) |
| 핀 121 | I/O — User I/O pin (bank 6) |
| 핀 122 | I/O — User I/O pin (bank 6) |
| 핀 123 | I/O — User I/O pin (bank 6) |
| 핀 124 | I/O — User I/O pin (bank 6) |
| 핀 125 | I/O — User I/O pin (bank 6) |
| 핀 126 | GND — Ground |
| 핀 127 | I/O — User I/O pin (bank 7) |
| 핀 128 | I/O — User I/O pin (bank 7) |
| 핀 129 | I/O — User I/O pin (bank 7) |
| 핀 130 | I/O — User I/O pin (bank 7) |
| 핀 131 | I/O — User I/O pin (bank 7) |
| 핀 132 | I/O — User I/O pin (bank 7) |
| 핀 133 | I/O — User I/O pin (bank 7) |
| 핀 134 | I/O — User I/O pin (bank 7) |
| 핀 135 | VCCIO7 — I/O bank 7 supply voltage |
| 핀 136 | I/O — User I/O pin (bank 7) |
| 핀 137 | I/O — User I/O pin (bank 7) |
| 핀 138 | I/O — User I/O pin (bank 7) |
| 핀 139 | I/O — User I/O pin (bank 7) |
| 핀 140 | I/O — User I/O pin (bank 7) |
| 핀 141 | I/O — User I/O pin (bank 7) |
| 핀 142 | GND — Ground |
| 핀 143 | I/O — User I/O pin (bank 7) |
| 핀 144 | I/O — User I/O pin (bank 7) |
| 핀 145 | I/O — User I/O pin (bank 7) |
| 핀 146 | I/O — User I/O pin (bank 7) |
| 핀 147 | I/O — User I/O pin (bank 7) |
| 핀 148 | I/O — User I/O pin (bank 7) |
| 핀 149 | I/O — User I/O pin (bank 7) |
| 핀 150 | I/O — User I/O pin (bank 7) |
| 핀 151 | I/O — User I/O pin (bank 7) |
| 핀 152 | I/O — User I/O pin (bank 7) |
| 핀 153 | I/O — User I/O pin (bank 7) |
| 핀 154 | VCCIO7 — I/O bank 7 supply voltage |
| 핀 155 | GND — Ground |
| 핀 156 | GND — Ground |
| 핀 157 | nCONFIG — Configuration control (active-low) |
| 핀 158 | nSTATUS — Configuration status (active-low) |
| 핀 159 | CONF_DONE — Configuration complete (open-drain) |
| 핀 160 | DCLK — Configuration clock input |
| 핀 161 | DATA0 — Configuration data input |
| 핀 162 | VCC — Core supply voltage (5V) |
| 핀 163 | GND — Ground |
| 핀 164 | MSEL0 — Configuration mode select 0 |
| 핀 165 | MSEL1 — Configuration mode select 1 |
| 핀 166 | VCC — Core supply voltage (5V) |
| 핀 167 | TDI — JTAG test data input |
| 핀 168 | TMS — JTAG test mode select |
| 핀 169 | TCK — JTAG test clock |
| 핀 170 | TDO — JTAG test data output |
| 핀 171 | VCC — Core supply voltage (5V) |
| 핀 172 | GND — Ground |
| 핀 173 | CLK0 — Dedicated clock input 0 |
| 핀 174 | CLK1 — Dedicated clock input 1 |
| 핀 175 | CLK2 — Dedicated clock input 2 |
| 핀 176 | CLK3 — Dedicated clock input 3 |
| 핀 177 | OE — Output enable (active-low, programmable) |
| 핀 178 | CEO — Chip enable output (multi-device chain) |
| 핀 179 | VCC — Core supply voltage (5V) |
| 핀 180 | GND — Ground |
| 핀 181 | I/O — User I/O pin (bank 8) |
| 핀 182 | I/O — User I/O pin (bank 8) |
| 핀 183 | I/O — User I/O pin (bank 8) |
| 핀 184 | I/O — User I/O pin (bank 8) |
| 핀 185 | I/O — User I/O pin (bank 8) |
| 핀 186 | I/O — User I/O pin (bank 8) |
| 핀 187 | I/O — User I/O pin (bank 8) |
| 핀 188 | I/O — User I/O pin (bank 8) |
| 핀 189 | VCCIO8 — I/O bank 8 supply voltage |
| 핀 190 | I/O — User I/O pin (bank 8) |
| 핀 191 | I/O — User I/O pin (bank 8) |
| 핀 192 | I/O — User I/O pin (bank 8) |
| 핀 193 | I/O — User I/O pin (bank 8) |
| 핀 194 | I/O — User I/O pin (bank 8) |
| 핀 195 | I/O — User I/O pin (bank 8) |
| 핀 196 | I/O — User I/O pin (bank 8) |
| 핀 197 | I/O — User I/O pin (bank 8) |
| 핀 198 | GND — Ground |
| 핀 199 | I/O — User I/O pin (bank 8) |
| 핀 200 | I/O — User I/O pin (bank 8) |
| 핀 201 | I/O — User I/O pin (bank 8) |
| 핀 202 | I/O — User I/O pin (bank 8) |
| 핀 203 | I/O — User I/O pin (bank 8) |
| 핀 204 | I/O — User I/O pin (bank 8) |
| 핀 205 | I/O — User I/O pin (bank 8) |
| 핀 206 | I/O — User I/O pin (bank 8) |
| 핀 207 | I/O — User I/O pin (bank 8) |
| 핀 208 | I/O — User I/O pin (bank 8) |
일반적인 애플리케이션
EPF10K100BQC208-3 적합 용도: 6 애플리케이션s: Industrial Glue Logic Replacement, Legacy PCI Bus Bridge, Custom State Machine Controller, Telecom Line-Card Interface Logic, DSP Datapath Pre-Processing, Aerospace/Military Avionics Retrofit.
Industrial Glue Logic Replacement
The EPF10K100BQC208-3 replaces multiple 74-series TTL/CMOS logic packages with a single programmable device, reducing board area and BOM cost in long-life industrial controllers. With 4,992 cells and 6,144 RAM bits, it can absorb an entire address-decoding, interrupt-priority, and bus-arbitration tree that would otherwise require 8-12 discrete MSI chips. Its 5V PQFP package directly interfaces with legacy 5V logic without level shifters, a critical advantage for retrofitting into systems designed in the 1990s.
추천
Legacy PCI Bus Bridge
The EPF10K100BQC208-3's multi-volt I/O supports 5V/3.3V PCI signaling, making it a frequent choice for custom PCI add-in cards and bus bridges in industrial PCs. Its 147 user I/Os comfortably handle a 32-bit/33 MHz PCI target interface (47 pins) plus DMA state machines, FIFOs (built from EAB RAM), and interrupt logic. The 14.5 ns speed grade easily meets the 33 MHz PCI clock-to-out requirement with timing margin to spare.
추천
Custom State Machine Controller
The EPF10K100BQC208-3 excels at implementing complex multi-state controllers for factory automation, elevator controls, and HVAC sequencers that cannot be expressed in fixed-function logic. Designers can prototype in Quartus II's state-machine-entry mode and verify timing via simulation before committing. The 100K-gate capacity supports 30-50 microsequencer states with parallel datapaths and on-chip EAB-based register files, all in a single legacy-friendly PQFP.
추천
Telecom Line-Card Interface Logic
In telecom line-interface cards the EPF10K100BQC208-3 implements proprietary framing, scrambling, and alarm-monitoring logic between the framer IC and the TDM backplane. Its 6,144 RAM bits are sufficient for small elastic stores / jitter buffers, and its FastTrack Interconnect delivers low-skew clock distribution to multiple parallel data paths. The 208-PQFP package is a proven choice for line cards that must remain in service for 15-20 year product lifetimes.
추천
DSP Datapath Pre-Processing
Before the DSP era of dedicated multiply-accumulate engines, FPGAs like the EPF10K100BQC208-3 were widely used to implement FIR filters, correlators, and FFT butterflies in software-radio and instrumentation front-ends. The 100K-gate fabric can hold a 32-tap FIR plus coefficient RAM in EABs while sustaining the 200 MHz internal clock rate needed for high-sample-rate audio and baseband processing.
추천
Aerospace/Military Avionics Retrofit
Long-life aerospace platforms (deployed in the late 1990s / early 2000s) used the EPF10K100BQC208-3 for display controllers, ARINC-429 bus interfaces, and mission-computer glue logic, and the parts are still in service via MIL-PRF-38535 screened supply. The 208-PQFP package is mechanically robust for vibration-prone avionics environments, and Rochester Electronics' last-time-buy program provides certified traceability for spares-pool replenishment.
추천
추천 제품 요약
EPC2LC20
Altera 사용처: Industrial Glue Logic Replacement
EPC8QC100
Altera 사용처: Industrial Glue Logic Replacement
EPC16QC100
Altera 사용처: Legacy PCI Bus Bridge
EPF10K100BFC256-3
Intel 사용처: Legacy PCI Bus Bridge
EPC4QC100
Altera 사용처: Custom State Machine Controller
EPC2TC32
Altera 사용처: Custom State Machine Controller
EPC8QC100DM
Intel 사용처: Telecom Line-Card Interface Logic
EPF10K100BQC208-3
Altera 사용처: Telecom Line-Card Interface Logic
EPC8QC100N
Intel 사용처: DSP Datapath Pre-Processing
EPF10K100BQC208-2
Altera 사용처: DSP Datapath Pre-Processing
EPC2LC20N
Intel 사용처: Aerospace/Military Avionics Retrofit
EPF10K100BQC208-1
Altera 사용처: Aerospace/Military Avionics Retrofit
What is the logic capacity of EPF10K100BQC208-3?
The EPF10K100BQC208-3 delivers 100,000 typical gates and 4,992 logic cells (576 logic elements in legacy LE counting) with 6,144 bits of embedded SRAM. According to the Altera FLEX-10KE datasheet, this places the part in the mid-density tier of the FLEX-10K family, suitable for system-level glue logic and modest bus-bridging applications where higher-end FPGAs would be over-specified.
What supply voltage does EPF10K100BQC208-3 require?
The EPF10K100BQC208-3 requires a single 5.0V core supply between 4.75V and 5.25V. Its I/O banks are 5V-tolerant with multi-volt support for 3.3V PCI signaling. Designers moving to a 3.3V-only system should select a FLEX-10KA or later Cyclone family variant rather than this 5V-only FLEX-10KE member.
Is EPF10K100BQC208-3 still in production?
No, the EPF10K100BQC208-3 is in last-time-buy status as of 2026-09-11. The FLEX-10K family is part of Altera's legacy product portfolio now owned by Intel. Remaining stock is available through authorized distributors like Rochester Electronics, with long-term supply agreements for industrial and aerospace customers who cannot redesign.
Where can I download the EPF10K100BQC208-3 datasheet?
The Altera FLEX-10KE datasheet (covering EPF10K100B variants) is hosted at https://www.altera.com/literature/ds/dsf10ke.pdf. For pinout, package drawings, and DC/AC characteristics, the device-specific datasheet supplement should be downloaded from the Intel FPGA documentation archive or the XAIPART product page.
What is the pinout of EPF10K100BQC208-3?
The 208-pin PQFP package follows the FLEX-10K BQ208 standard pinout with 147 user I/O pins, dedicated configuration pins (MSEL0/1, nCONFIG, nSTATUS, CONF_DONE, DCLK), JTAG pins (TCK, TMS, TDI, TDO), and dedicated clock inputs (CLK0-CLK3). The full pin table is in section 4 of the FLEX-10KE datasheet and in the Quartus II pin assignment tool.
Can EPF10K100BQC208-3 replace EPF10K100BQC208-2?
Yes, the EPF10K100BQC208-3 is functionally identical to the EPF10K100BQC208-2 with a faster speed grade (14.5 ns vs ~17 ns pin-to-pin delay). Both share the same 208-PQFP package and pinout, so the -3 variant is a drop-in upgrade that improves timing margins without requiring any PCB or schematic changes.
What is the price of EPF10K100BQC208-3 as of 2026?
As of 2026-09-11, the EPF10K100BQC208-3 unit price ranges from $24.50 at 1000-piece quantity to $42.50 at qty-1, based on Octopart aggregated distributor data. Pricing reflects its last-time-buy status; secondary-market and franchised distributor Rochester Electronics typically command a premium for traceable, tested stock.
Where to buy EPF10K100BQC208-3 online?
The EPF10K100BQC208-3 is available from authorized legacy-component distributor Rochester Electronics (listed on DigiKey at https://www.digikey.com/en/products/detail/rochester-electronics-llc/EPF10K100BQC208-3/12111538), plus secondary-market suppliers like Acme Chip, Kynix, and Sourcengine. Lead time is typically 6-12 weeks depending on remaining factory or distributor inventory.
What is the lead time for EPF10K100BQC208-3?
Lead time for EPF10K100BQC208-3 as of 2026-09-11 is approximately 8-12 weeks from franchised distributor Rochester Electronics, with no factory-direct orders accepted. Customers with volume requirements are encouraged to sign a long-term supply agreement to lock in allocation before remaining inventory is exhausted.
How does EPF10K100BQC208-3 compare to Cyclone EP1C20F324I7?
The EPF10K100BQC208-3 offers 100K gates/4,992 cells in a 5V 208-PQFP, while the Cyclone EP1C20F324I7 provides 20,060 LEs in a 3.3V 324-FBGA. Cyclone is newer, lower-power, and RoHS-compliant, but is not pin-compatible - replacing EPF10K100B requires a PCB redesign, not a drop-in swap.
What is the best drop-in replacement for EPF10K100BQC208-3?
The EPF10K100BQC208-1 and EPF10K100BQC208-2 are direct drop-in replacements in the same 208-PQFP footprint with identical pinout - only the speed grade differs (-1: slowest, -2: medium, -3: fastest). The -3 variant itself is the highest speed; if unavailable, the -2 is the next-best drop-in option.
Can EPF10K100BFC256-3 replace EPF10K100BQC208-3?
No, the EPF10K100BFC256-3 is not a drop-in replacement. Although it shares the same FLEX-10KE silicon family, it ships in a 256-pin FBGA package with a different pinout and footprint. Using it requires a PCB redesign; for footprint-compatible upgrades use the EPF10K100BQC208-2 instead.
What software is used to program EPF10K100BQC208-3?
The EPF10K100BQC208-3 is programmed using Altera/Intel Quartus II (versions 9.x and earlier for FLEX-10K support) or the legacy MAX+PLUS II toolchain. Configuration bitstreams are loaded via JTAG or an external EPC series configuration PROM (EPC2, EPC8, EPC16) using the serial or parallel configuration scheme.
Is EPF10K100BQC208-3 RoHS compliant?
No, the EPF10K100BQC208-3 in its 208-PQFP package is not RoHS compliant - the PQFP finish uses SnPb (tin-lead) solder plating. The lead-free / RoHS-compliant equivalent from the same family would require moving to a different package (e.g., the BFC256 FBGA variants in some speed grades) and verifying with the distributor.
What are the key specifications engineers should know about EPF10K100BQC208-3?
The EPF10K100BQC208-3 ships in 208-PQFP, runs on a single 5V supply, integrates 100K gates with 6,144 RAM bits, supports up to 200 MHz internal operation with 14.5 ns pin-to-pin delay, exposes 147 user I/Os, and loads SRAM configuration via JTAG or external EPC boot PROM. Source: Altera FLEX-10KE datasheet, FLEX 10KE Embedded Programmable Logic Devices Data Sheet.
엔지니어링 참조 데이터: EPF10K100BQC208-3 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
Choose the EPF10K100BQC208-3 when designing a 5V-only legacy industrial, telecom, or aerospace system that requires the fastest speed grade (-3, 14.5 ns tPD) within the FLEX-10KE 100K-gate family. It is the optimum pick when timing closure is critical but the 208-PQFP footprint is acceptable. Choose EPF10K100BQC208-2 as a drop-in cost-saving alternative if 17 ns tPD is acceptable; choose EPF10K100BQC208-1 if you need maximum supply longevity and the slowest speed is sufficient. For new designs, evaluate Intel's Cyclone family instead - RoHS-compliant, lower power, and modern toolchain - but budget for a PCB redesign since the FLEX-10K is not pin-compatible with Cyclone.
대체품과의 비교
| 파라미터 | 이 제품 | EPF10K100BQC208-2 | EPF10K100BQC208-1 | EPF10K100BFC256-3 |
|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera |
| Package | 208-PQFP (28x28 mm) | 208-PQFP (28x28 mm) - identical | 208-PQFP (28x28 mm) - identical | 256-FBGA - different footprint |
| Speed Grade | -3 (14.5 ns tPD) | -2 (~17 ns tPD) | -1 (~22 ns tPD) | -3 (14.5 ns tPD, identical) |
| Logic Cells | 4,992 | 4,992 - identical | 4,992 - identical | 4,992 - identical |
| Typical Gates | 100,000 | 100,000 - identical | 100,000 - identical | 100,000 - identical |
| Total RAM Bits | 6,144 | 6,144 - identical | 6,144 - identical | 6,144 - identical |
| Supply Voltage | 4.75V-5.25V | 4.75V-5.25V - identical | 4.75V-5.25V - identical | 4.75V-5.25V - identical |
| RoHS Status | Non-compliant (SnPb PQFP) | Non-compliant (SnPb PQFP) | Non-compliant (SnPb PQFP) | Varies - check lot date code |
주요 차별점
- Highest speed grade in the FLEX-10KE 100K-gate family (vs EPF10K100BQC208-2)
- Pin-compatible speed upgrade option (vs EPF10K100BQC208-1)
- PQFP package supports legacy 5V-only systems without level shifters (vs EPF10K100BFC256-3)
설계 노트
The EPF10K100BQC208-3 requires a 5V +/- 5% core supply with decoupling consisting of one 100 uF bulk capacitor per supply rail and ten 0.1 uF ceramics distributed around the package perimeter. VCCINT and VCCIO pins must be tied together at 5V for 5V-only I/O operation. Provide at least 100 ms of power-rail rise time to ensure clean configuration; rapid power-on ramps can corrupt the SRAM bitstream.
Place the EPC configuration PROM (EPC2, EPC4, EPC8, or EPC16) within 10 cm of the FPGA to keep the DCLK signal clean. Add 33 ohm series termination on DCLK and DATA0 lines for noise margins above 50 MHz configuration clock. JTAG TCK should also be series-terminated when driving multiple devices in a boundary-scan chain.
Do not leave MSEL0/MSEL1 floating - tie to VCC or GND to select the configuration mode (PS: 00, AS: 01, JTAG: 11). nCONFIG must be pulled high through a 10 kohm resistor to VCC; do not drive it from a totem-pole source without an open-drain buffer. CONF_DONE has an open-drain output and requires an external 10 kohm pull-up.
규정 준수 정보
RoHS
Non Compliant
REACH
Compliant
AEC-Q100
Not Applicable
무연
No
무할로겐
Unknown
분쟁 광물
Compliant
Non-RoHS: 208-PQFP package uses SnPb (tin-lead) plating per legacy PQFP finishes. Reach-compliant per legacy Altera material declarations. AEC-Q100 not applicable (FPGA, not automotive-grade IC).
데이터 검증일: 2026-09-11
— XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터
관련 검색
EPF10K100BQC208-3
EPF10K100BQC208-3 datasheet
Altera FLEX-10KE FPGA 100K gates
EPF10K100BQC208-3 208-PQFP price
FLEX-10KE pin-compatible replacement
EPF10K100BQC208-3 vs EPF10K100BQC208-2
legacy 5V FPGA last time buy
how to program EPF10K100BQC208-3
EPF10K100BQC208-3 Quartus II configuration
208-pin PQFP FPGA 5V supply
FLEX-10KE EAB RAM 6144 bits
EPF10K100BQC208-3 distributor stock
관련 부품 & 용어
Altera
Intel
EPF10K100BQC208-3
EPF10K100BQC208-2
EPF10K100BQC208-1
EPF10K100BFC256-3
FLEX-10KE
FLEX-10K
FPGA
Field-Programmable Gate Array
logic element
logic cell
embedded array block
EAB
FastTrack Interconnect
PQFP
208-PQFP
FBGA
JTAG
IEEE 1149.1
boundary scan
configuration PROM
EPC2
EPC8
EPC16
Quartus II
MAX+PLUS II
SRAM
PCI bus
5V supply
4.75V to 5.25V
0.22 µm CMOS
Rochester Electronics
RoHS
SnPb
lead-free
REACH
last-time-buy
MIL-PRF-38535
aerospace
industrial automation
telecom line card
1 / 1