EPM5192JM-1/883B - 192-Macrocell EPLD, 55ns, 5V, 883B MIL | Intel / Altera
부품 번호: EPM5192JM-1/883B ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $185 | $185.00 |
| 10 | $165 | $1,650.00 |
| 100 | $142 | $14,200.00 |
| 500 | $122.5 | $61,250.00 |
| 1,000 | $108 | $108,000.00 |
EPM5192JM-1/883B 개요
An EPLD (Erasable Programmable Logic Device) is a non-volatile programmable logic device that combines the architectural flexibility of a PLD with high logic density and deterministic timing. Within the broader taxonomy, EPLDs sit between classic SPLDs/CPLDs and SRAM-based FPGAs; the MAX 5000 family is the ancestor of the modern Altera/Intel MAX II, MAX V, and MAX 10 CPLD lineages, widely used for glue logic, address decoding, bus interfacing, and state-machine implementation where predictable timing and instant-on behavior are required.
Key features of the EPM5192JM-1/883B include 192 macrocells with configurable flip-flops, a 55 ns pin-to-pin logic delay at 5V, an internal interconnect network based on the Altera MAX architecture, 64 bidirectional I/O pins, in-system UV-erase/reprogram capability via a quartz window, and three speed/power grades (-1 = fastest). The -1/883B suffix denotes the speed grade (-1) and MIL-STD-883B screening, making this part suitable for defense, aerospace, and other high-reliability military programs.
Architecturally, the device uses an AND-OR logic fabric with a programmable interconnect array (PIA) that delivers fixed, deterministic propagation delays independent of logic placement - a critical advantage over SRAM-based FPGAs in real-time control and signal-routing applications. The CMOS process and low-power macrocells support typical standby currents well under 200 mA across the full military temperature range.
Typical applications include military/aerospace avionics bus interfaces (MIL-STD-1553, ARINC 429 glue logic), industrial control state machines, address decoding and bus arbitration in VME/VXI backplanes, radiation-tolerant (when derated) ground systems, and legacy replacement of discrete TTL/CMOS glue logic in defense electronics.
When designing with this device, note that the JM (JLCC) package has a top-hat quartz window for UV erasure and is not hermetically opaque to UV light; opaque stickers over the window are recommended once the design is finalized to prevent accidental erasure in fielded units. Pin-compatible MAX 5000 variants in different speed grades (EPM5192GM-1/883B, EPM5192GC-1) and the plastic non-windowed JC family allow design portability across commercial and military programs.
This page synthesizes distributor stock and pricing, MIL-STD-883B screening details, drop-in same-brand alternatives within the EPM5192 family, and practical design notes that go beyond the basic datasheet summary.
드롭인 대체품: EPM5192JM-1/883B — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EPM5192JM-1/883B (동일 폼 팩터 및 풋프린트) — 차이점: Package, Mounting Type, Programming Method, Device Type, Supply Voltage (VCC).
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EPM5192GM-1/883B
✅ 드롭인✓ 재고 있음
$195 / 개
데이터시트 보기 →EPM5192GM/883B
✅ 드롭인✓ 재고 있음
$118 / 개
데이터시트 보기 →EPM5192GM883B-2
✅ 드롭인✓ 재고 있음
$142 / 개
데이터시트 보기 →EPM5192GM883B
✅ 드롭인✓ 재고 있음
$142 / 개
데이터시트 보기 →EPM5192GM-2/883B
✅ 드롭인✓ 재고 있음
$195 / 개
데이터시트 보기 →EPM5192GM/883
✅ 드롭인✓ 재고 있음
$125 / 개
데이터시트 보기 →EPM5192JM-1/883B 최대 정격 & 전기적 특성
| Device Family | MAX 5000 EPLD |
| Product Type | Erasable Programmable Logic Device (EPLD) |
| Technology | CMOS, UV-erasable |
| Macrocells | 192 |
| User I/O Pins | 64 |
| Total Logic Inputs | 72 (including 7 dedicated inputs) |
| Propagation Delay (tPD) | 55 ns |
| Supply Voltage (VCC) | 4.5 V to 5.5 V (nominal 5 V) |
| Speed Grade | -1 (fastest) |
| 동작 온도 | -55C to +125C (military) |
| 패키지 | 84-pin JLCC (JM) with UV window |
| 실장 유형 | Surface Mount |
| Screening | MIL-STD-883B Class B |
| Programming Method | UV erase + standard PLD programmer |
EPM5192JM-1/883B 핀 구성
| 핀 1 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 2 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 3 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 4 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 5 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 6 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 7 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 8 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 9 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 10 | GND — Ground |
| 핀 11 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 12 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 13 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 14 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 15 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 16 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 17 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 18 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 19 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 20 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 21 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 22 | GND — Ground |
| 핀 23 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 24 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 25 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 26 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 27 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 28 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 29 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 30 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 31 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 32 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 33 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 34 | GND — Ground |
| 핀 35 | INPUT — Dedicated input |
| 핀 36 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 37 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 38 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 39 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 40 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 41 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 42 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 43 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 44 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 45 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 46 | GND — Ground |
| 핀 47 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 48 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 49 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 50 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 51 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 52 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 53 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 54 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 55 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 56 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 57 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 58 | GND — Ground |
| 핀 59 | INPUT — Dedicated input |
| 핀 60 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 61 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 62 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 63 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 64 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 65 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 66 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 67 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 68 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 69 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 70 | GND — Ground |
| 핀 71 | INPUT — Dedicated input |
| 핀 72 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 73 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 74 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 75 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 76 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 77 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 78 | I/O — Bidirectional user I/O (macrocell array) |
| 핀 79 | VCC — +5V supply |
| 핀 80 | INPUT — Dedicated input |
| 핀 81 | INPUT — Dedicated input |
| 핀 82 | INPUT — Dedicated input |
| 핀 83 | INPUT — Dedicated input |
| 핀 84 | I/O — Bidirectional user I/O (macrocell array) |
일반적인 애플리케이션
EPM5192JM-1/883B 적합 용도: 6 애플리케이션s: Military Avionics Bus Interface Glue Logic, VME/VXI Backplane Address Decoding and Arbitration, Industrial Control State Machines and Sequencers, Legacy TTL/CMOS Glue Logic Consolidation, Radar and Sensor Signal Routing, Aerospace Flight Control System Redundancy Logic.
Military Avionics Bus Interface Glue Logic
The EPM5192JM-1/883B is widely used to implement glue logic around MIL-STD-1553 and ARINC 429 bus interfaces, where its 192 macrocells and 64 I/Os comfortably consolidate address decoding, interrupt steering, and timing-recovery state machines that previously required multiple discrete TTL/CMOS packages. The -55C to +125C military temperature range and MIL-STD-883B Class B screening directly satisfy avionics environmental requirements without additional up-screening. The deterministic 55 ns tPD - independent of logic placement thanks to the MAX Programmable Logic Array (PLA) interconnect - guarantees worst-case bus turnaround timing for command/response handshakes, a critical requirement for real-time military databuses where timing margins are audited to single-digit nanoseconds.
추천
VME/VXI Backplane Address Decoding and Arbitration
In legacy VMEbus and VXI backplane systems, the EPM5192JM-1/883B serves as a single-chip address decoder and bus arbiter, replacing dozens of 74LS/74F-series TTL gates. Its 64 user I/O pins handle the full VME address-data bus (A16/A24/A32 and D8/D16/D32 modes) plus DTACK, BBSY, and grant-chain signals, while the 192 macrocells implement multi-level address matchers and prioritised arbitration logic. The MAX 5000 fabric's instant-on non-volatile configuration means no boot PROM is required - the device is operational within 55 ns of VCC stable, which is essential for VMEbus system-controller responsibilities where slave boards expect immediate bus mastership resolution.
추천
Industrial Control State Machines and Sequencers
Engineers deploy the EPM5192JM-1/883B in industrial PLCs, motor controllers, and process-control sequencers where deterministic timing is required for safety interlocks. The 192 macrocells and on-chip flip-flops implement complex Moore/Mealy state machines with up to several dozen states, replacing racks of relays and discrete timers. The wide 5V ±10% supply tolerance tolerates unregulated industrial 24V rails stepped down to 5V, while the -55C to +125C range covers outdoor cabinet and factory-floor environments. The non-volatile MAX configuration eliminates the inrush chaos of SRAM-based FPGAs and ensures the machine never starts in an undefined logic state, a critical requirement for IEC 61508/61511 functional-safety paths.
추천
Legacy TTL/CMOS Glue Logic Consolidation
The EPM5192JM-1/883B is a classic 'one-chip replaces a board' solution for defense electronics sustainment programs. A 6U VME card populated with 30-50 74LS245, 74LS138, 74LS244, and 74LS374 buffers and latches can typically be replaced by a single EPM5192 plus a few bus transceivers. The 192 macrocells provide ample capacity, while the 64 user I/Os handle the multi-bus glue required between legacy microprocessors (8086, 68000, 80386EX), memory, and peripheral devices. MIL-STD-883B screening plus the proven MAX architecture make this part preferred over modern SRAM FPGAs for legacy programs where re-qualification cost dominates any silicon-savings argument.
추천
Radar and Sensor Signal Routing
In ground-based radar and electro-optical sensor front-ends, the EPM5192JM-1/883B routes and conditions timing-critical control signals between the RF up/down-conversion chain, ADCs/DACs, and the signal-processing back-end. Its 55 ns propagation delay, combined with the deterministic MAX interconnect, ensures that beam-steering commands, range-gate pulses, and trigger signals arrive within picosecond-level matched-path delays - critical for phased-array calibration. The wide military temperature range and MIL-STD-883B screening support outdoor sensor installations, while the 192-macrocell capacity accommodates the wide mux/demux trees and timing generators typical of modern radar signal paths.
추천
Aerospace Flight Control System Redundancy Logic
Flight-control actuator drive electronics and sensor-signal conditioning units use the EPM5192JM-1/883B as a secondary/tertiary vote-comparator and channel-health monitor. The 192 macrocells can implement dual or triple-redundant signal voting with disagreement detection, while the deterministic 55 ns tPD allows tight synchronisation with the primary flight-control processor. The instant-on non-volatile MAX 5000 configuration means the device is fully operational at power-up with no boot sequence - essential for flight safety where any undefined logic state during startup is unacceptable. The MIL-STD-883B Class B screening directly addresses DO-254/DO-178C design-assurance expectations for Level A/B flight-critical hardware.
추천
추천 제품 요약
엔지니어링 참조 데이터: EPM5192JM-1/883B — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EPM5192GM-1/883B | EPM5192GM/883B | EPM5192GM883B-2 | EPM5192GM883B | EPM5192GM-2/883B | EPM5192GM/883 |
|---|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | 84-pin JLCC (JM, UV window) | 84-pin JLCC (GM, no UV window) | 84-pin JLCC (GM, no UV window) | 84-pin JLCC (GM, no UV window) | 84-pin JLCC (GM, no UV window) | 84-pin JLCC (GM, no UV window) | 84-pin JLCC (GM, no UV window) |
| Macrocells | 192 | 192 | 192 | 192 | 192 | 192 | 192 |
| User I/O Pins | 64 | 64 | 64 | 64 | 64 | 64 | 64 |
| Speed Grade | -1 | -1 | standard | -2 (slower) | standard | -2 (slower) | standard |
| MIL-STD-883B Screening | Yes (Class B) | Yes (Class B) | Yes (Class B) | Yes (Class B) | Yes (Class B) | Yes (Class B) | Yes (Rev /883) |
| UV Erase Window | Yes (ceramic lid) | No (GM = no window) | No (GM = no window) | No (GM = no window) | No (GM = no window) | No (GM = no window) | No (GM = no window) |
주요 차별점
- UV-erasable window allows in-house reprogramming during development (vs EPM5192GM-1/883B)
- MIL-STD-883B Class B screening directly satisfies military programs (vs EPM5192JC-1)
- Largest macrocell density in MAX 5000 family (vs EPM5130GM883B)
설계 노트
Once the EPM5192JM-1/883B is programmed for a production design, place an opaque label (black electrical tape or UV-blocking sticker) over the quartz window. Sunlight or fluorescent lighting contains enough UV-A (315-400 nm) to gradually erase the EPROM-based configuration over weeks-months, causing field failures. The non-windowed GM package variants in this family eliminate this risk entirely for production builds.
Use a minimum 4-layer PCB with a continuous ground plane beneath the JLCC-84 footprint. Decouple each VCC pin with a 0.1 uF ceramic capacitor placed within 5 mm of the pin, plus a single 10 uF tantalum bulk capacitor near the device. The 84-pin JLCC lead pitch is 1.27 mm (50 mil) - standard J-lead soldering profile with peak temperature 220 C ±5 C, 60 sec above 183 C, is recommended for the ceramic package.
Estimated: With 192 macrocells toggling at 10 MHz, typical ICC for the EPM5192JM-1/883B at 5V is approximately 150-200 mA; standby current is <10 mA. Use a regulator with at least 250 mA headroom and 5% tolerance. Add bulk decoupling on VCC planes since the device draws current in sharp transitions during macrocell state changes, which can couple into analog rails if not isolated.
The ceramic JLCC-84 package has excellent thermal conductivity (theta_JA approx 30 C/W in still air, lower with airflow). At full military temperature (-55C to +125C), no heatsink is required for typical 192-macrocell designs drawing under 250 mA. However, for fully-populated designs with all I/Os switching at maximum frequency, derate by 20% or provide forced-air cooling for high-altitude applications where air density is reduced.
Route all dedicated input pins (typically pins 35, 59, 71, 80, 81, 82, 83) directly to connectors or nearby drivers without stubs - these are pure input paths that bypass the macrocell output buffers and benefit from shortest electrical path. Similarly, group ground pins (10, 22, 34, 46, 58, 70) around the package perimeter and stitch them to the ground plane with multiple vias each to minimise ground bounce on simultaneous-switching outputs (SSOs).
규정 준수 정보
MIL-STD-883B Class B screened per MIL-STD-883 Test Methods. RoHS/REACH/lead-free status marked unknown - the hermetic ceramic JLCC package and military-screened supply chain typically fall outside RoHS scope (military/aerospace exemptions), but no manufacturer datasheet statement is available in the verified web data.
