EPM570GM100C5N - 440 Macrocell MAX II CPLD, 100-MBGA | Intel
부품 번호: EPM570GM100C5N ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $17.5 | $17.50 |
| 10 | $15.75 | $157.50 |
| 100 | $13.5 | $1,350.00 |
| 500 | $11.8 | $5,900.00 |
| 1,000 | $10.4 | $10,400.00 |
EPM570GM100C5N 개요
A CPLD (Complex Programmable Logic Device) is a non-volatile, flash-based programmable logic device that sits in the hierarchy between simple PLDs and full FPGAs. CPLDs are widely used for I/O expansion, bus bridging, power-up sequencing, and glue-logic functions where deterministic timing and instant-on behavior are required. The MAX II family pioneered low-cost, low-power CPLDs based on a look-up table (LUT) architecture, offering higher logic density than traditional PAL/GAL devices while keeping non-volatile instant-on capability.
Key features of the EPM570GM100C5N include 440 logic elements (macro cells), a flash-based non-volatile configuration memory that eliminates external boot PROM, in-system programmability via JTAG, MultiVolt core supporting I/O voltages from 1.5 V to 3.3 V, and an internal oscillator. The MultiVolt I/O interface allows the part to bridge between 3.3 V, 2.5 V, 1.8 V, and 1.5 V logic families without external level shifters, simplifying mixed-voltage PCB designs.
The device's flash-backed architecture provides true instant-on operation - the device is functional within microseconds of power-up. The 100-ball MBGA package supports high-density board layouts while keeping the footprint compact at 6 x 6 mm, suitable for space-constrained industrial, consumer, and communications designs.
Typical applications include I/O expansion and bus bridging in industrial controllers, power-up/power-down sequencing logic for FPGA and ASIC rails, JTAG-controlled configuration management, LED display driving and refresh, and address decoding glue logic between processors and peripherals. Designers frequently select the EPM570 family for designs that previously required multiple 74-series logic devices, since one CPLD replaces dozens of discrete gates while adding reconfigurability.
Design consideration: when migrating between speed grades (C4, C5, C5N, I5N), verify that the timing closure margins remain acceptable. The C5N industrial grade (-40C to +125C) is preferred for harsh-environment deployments, while commercial C5 is suitable for cost-sensitive consumer designs. Always observe JTAG chain integrity when the CPLD shares the JTAG bus with other programmable devices.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone.
드롭인 대체품: EPM570GM100C5N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EPM570GM100C5N (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature, Package, Process Technology, Programming Interface, Configuration Memory.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EPM570GM100I5N
✅ 드롭인✓ 재고 있음
$8.55 / 개
데이터시트 보기 →EPM570GM100C4N
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EPM570F100C5N
✅ 드롭인✓ 재고 있음
$5.2 / 개
데이터시트 보기 →EPM570F100I5N
✅ 드롭인✓ 재고 있음
$13.4 / 개
데이터시트 보기 →EPM570F100C4N
✅ 드롭인✓ 재고 있음
$14.32 / 개
데이터시트 보기 →EPM570F100A5N
✅ 드롭인✓ 재고 있음
$9.85 / 개
데이터시트 보기 →EPM570GM100C5N 최대 정격 & 전기적 특성
| Family | MAX II |
| Device Type | CPLD (Complex Programmable Logic Device) |
| Macro Cells | 440 |
| User I/Os | 76 |
| Logic Elements | 440 |
| 핀 수 | 100 |
| Package Type | Micro FBGA-100 (MBGA), 6 x 6 mm, 0.5 mm pitch |
| Pin-to-Pin Delay (tPD) | 5.4 ns |
| Maximum Frequency | 201.1 MHz |
| 동작 온도 | -40C to +125C (industrial) |
| 공급 전압 | 1.8 V core (MultiVolt I/O 1.5 V to 3.3 V) |
| Program Memory Type | Flash (non-volatile, in-system programmable) |
| Programming Interface | JTAG (IEEE 1149.1) |
| 실장 유형 | Surface Mount |
| Lead Free / RoHS | Yes / Compliant |
| Logic Family | CMOS |
EPM570GM100C5N micro fbga-100 (mbga), 6 x 6 mm, 0.5 mm pitch 핀 구성 가이드
EPM570GM100C5N(micro fbga-100 (mbga), 6 x 6 mm, 0.5 mm pitch 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EPM570GM100C5N.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EPM570GM100C5N 적합 용도: 7 애플리케이션s: I/O Expansion and Bus Bridging, FPGA / ASIC Power Sequencing, Industrial Control and PLC Logic, JTAG Chain Management and Configuration Control, Address Decoding Glue Logic, LED Display Refresh and Driver Logic, Communication Protocol Bridging (UART / SPI / I2C).
I/O Expansion and Bus Bridging
The EPM570GM100C5N's 440 macrocells and 76 user I/Os make it ideal for expanding a microcontroller's GPIO count and bridging between mismatched bus widths such as SPI to parallel or 8-bit to 16-bit. With 5.4 ns pin-to-pin delay and 201.1 MHz fMAX, the part handles real-time bus protocol conversion without adding latency. The MultiVolt I/O interface (1.5 V to 3.3 V) directly interfaces with mixed-voltage peripherals, eliminating external level shifters. Compared to discrete 74-series glue logic, a single CPLD replaces dozens of gates and is reconfigurable in-system via JTAG.
추천
FPGA / ASIC Power Sequencing
The EPM570GM100C5N is widely used to sequence multiple power rails for FPGA and ASIC bring-up. Its non-volatile flash-based instant-on architecture means the CPLD is operational within microseconds of power-up, before the main FPGA has finished configuration. The 76 user I/Os can drive PG (power-good) signals, EN lines, and reset multiplexers across an entire board. The 1.8 V core with MultiVolt I/O interfaces directly to standard POL converter enable pins. Compared to a discrete sequencer IC, the CPLD offers unlimited sequencing patterns and field updates.
추천
Industrial Control and PLC Logic
The EPM570GM100C5N's industrial -40C to +125C operating range and robust flash configuration make it suitable for industrial PLC, motor drive, and process-control logic. The 440 macrocells handle typical encoder decoding, PWM generation, and safety interlock logic that previously required multiple discrete timers and gates. The non-volatile instant-on behavior ensures deterministic behavior at every power cycle, critical for safety-certified industrial systems. The MBGA-100 footprint supports compact, vibration-resistant PCB layouts.
추천
JTAG Chain Management and Configuration Control
Designers use the EPM570GM100C5N as a JTAG controller or chain multiplexer to manage shared JTAG buses between FPGAs, flash memory, and processors. The CPLD's 76 I/Os can drive TMS, TCK, TDI, TDO signals with proper buffering, while the flash-backed configuration stores the JTAG topology non-volatilely. The 5.4 ns tPD supports TCK frequencies up to 100 MHz in chain multiplexing applications. Compared to a discrete JTAG switch IC, the CPLD adds custom test-pattern generation and boundary-scan support.
추천
Address Decoding Glue Logic
The EPM570GM100C5N's 440 macrocells and 76 user I/Os are well-suited for memory and peripheral address-decoding tasks in microprocessor systems. By replacing dozens of 74HC138 / 74HC139 decoder chips with a single CPLD, designers save PCB area and gain flexibility for late-stage address map changes. The 5.4 ns tPD adds negligible access-time penalty, while the MultiVolt I/O interface bridges between modern 1.8 V processors and legacy 3.3 V peripherals. JTAG-based in-system reprogramming lets designers iterate without respinning PCBs.
추천
LED Display Refresh and Driver Logic
The EPM570GM100C5N drives multiplexed LED matrix displays by generating row-select timing, PWM dimming waveforms, and refresh control. With 76 user I/Os, the CPLD directly interfaces to 8-16 row LED matrices without external drivers. The 201.1 MHz internal frequency supports high PWM resolution for color depth, while the flash-based architecture eliminates boot-PROM complexity. The MultiVolt I/O interfaces to both 3.3 V LED driver ICs and 5 V legacy displays, simplifying mixed-voltage designs.
추천
Communication Protocol Bridging (UART / SPI / I2C)
The EPM570GM100C5N bridges between UART, SPI, I2C, and custom serial protocols in embedded systems. The 440 macrocells implement multiple protocol state machines in parallel, and the 76 user I/Os drive multiple bus instances simultaneously. The 5.4 ns tPD supports SPI clock rates up to 100 MHz with deterministic timing. The MultiVolt I/O (1.5 V to 3.3 V) bridges between modern low-voltage MCUs and legacy 3.3 V peripherals, eliminating external level shifters. JTAG-based field updates enable protocol patches in deployed equipment.
추천
추천 제품 요약
엔지니어링 참조 데이터: EPM570GM100C5N — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EPM570GM100I5N | EPM570GM100C4N | EPM570F100C5N | EPM570F100I5N | EPM570F100C4N | EPM570F100A5N |
|---|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | Micro FBGA-100 (MBGA), 6x6 mm | Micro FBGA-100 (MBGA) - same | Micro FBGA-100 (MBGA) - same | Micro FBGA-100 (MBGA) - same | Micro FBGA-100 (MBGA) - same | Micro FBGA-100 (MBGA) - same | Micro FBGA-100 (MBGA) - same |
| Macro Cells | 440 | 440 | 440 | 440 | 440 | 440 | 440 |
| Pin-to-Pin Delay (tPD) | 5.4 ns | 5.0 ns | 4.5 ns | 5.4 ns | 5.0 ns | 4.5 ns | 5.0 ns |
| Maximum Frequency | 201.1 MHz | 222.2 MHz | 304 MHz | 201.1 MHz | 222.2 MHz | 304 MHz | 222.2 MHz |
| Operating Temperature | -40C to +125C (industrial) | -40C to +125C (industrial) | 0C to +85C (commercial) | -40C to +125C (industrial) | -40C to +125C (industrial) | 0C to +85C (commercial) | -40C to +125C (industrial) |
| User I/Os | 76 | 76 | 76 | 76 | 76 | 76 | 76 |
| Series Variant | G-series | G-series | G-series | F-series | F-series | F-series | F-series |
| RoHS Compliance | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
주요 차별점
- Industrial temperature grade with -40C to +125C rating (vs EPM570GM100C5 (commercial, no 'N' suffix))
- 5.4 ns tPD with non-volatile instant-on configuration (vs EPM570GM100C4N)
- G-series silicon with full MAX II feature set (vs EPM570F100C5N (F-series variant))
설계 노트
The Micro FBGA-100 (6 x 6 mm, 0.5 mm pitch) requires careful PCB layout. Use NSMD (non-solder mask defined) pads with a diameter approximately 80% of the ball diameter for reliable BGA reflow. Micro-vias under the BGA are acceptable with stacked-via or staggered-via structures; dog-bone fan-out is recommended for inner rows when escape routing is constrained. Per IPC-7093, BGA pad finishes should use ENIG or OSP for consistent wetting, and reflow profile must follow J-STD-020 MSL classification.
The MultiVolt I/O interface (1.5 V to 3.3 V) simplifies mixed-voltage designs but does not eliminate the need for series damping resistors on long PCB traces. For signals routed longer than 50 mm (about 1.6 inches) on FR-4, add 22-33 ohm series resistors to dampen reflections. The 201.1 MHz fMAX supports high-speed protocol bridges; for SPI clocks above 50 MHz, controlled-impedance routing (50 ohm single-ended) is recommended.
Do not omit the JTAG chain integrity check when sharing the JTAG bus with other programmable devices. Pull TMS and TCK high during power-up to keep the JTAG TAP controller in a known state. The flash-based configuration requires a valid VCCIO during programming; programming with VCCIO below 1.5 V can corrupt the configuration memory and require a re-programming cycle. Always verify the JTAG IDCODE after programming to confirm successful configuration.
Estimated: at typical 1.8 V core supply and 100% toggle rate, the EPM570GM100C5N dissipates approximately 100 mW during normal operation. The MBGA-100 package has a theta-JA of approximately 35-40 C/W on a 4-layer JEDEC test board, yielding a junction temperature rise of 3-4 C above ambient. No external heatsink is required, but adequate airflow is recommended in enclosed industrial enclosures operating above 70 C ambient. De-rate maximum toggle rate by 10-15% above 100 C ambient.
규정 준수 정보
RoHS and lead-free compliant per Intel product page. Industrial -40C to +125C operating range. Not AEC-Q100 qualified for automotive; for automotive-grade alternatives consider MAX V CPLD family with AEC-Q100 documentation.
