EPM9560RI240-15 - 560-Macrocell MAX 9000 CPLD, 15ns, RQFP-240 | Intel
부품 번호: EPM9560RI240-15 ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $38.5 | $38.50 |
| 10 | $34.2 | $342.00 |
| 100 | $29.95 | $2,995.00 |
| 500 | $26.5 | $13,250.00 |
| 1,000 | $23.1 | $23,100.00 |
EPM9560RI240-15 개요
A CPLD (Complex Programmable Logic Device) is a non-volatile, instant-on programmable logic device that combines multiple PLA-like logic array blocks (LABs) connected through a programmable interconnect matrix (PIA). Within the broader taxonomy, the EPM9560RI240-15 sits in this hierarchy: programmable logic device -> CPLD -> EEPROM-based CPLD -> MAX architecture CPLD -> high-density (>500 macrocell) CPLD. Compared to FPGAs, CPLDs offer deterministic timing, no configuration load time, and superior pin-locking and I/O count for glue-logic, bus-interface, and state-machine applications.
The EPM9560RI240-15 provides 191 user I/O pins (industrial version) with 4 dedicated inputs, JTAG-compliant in-system programmability via IEEE Std 1149.1, and a 5.0 V core with multi-voltage I/O. Each macrocell supports combinatorial or registered logic with programmable polarity, a D/T/JK/SR flip-flop, and a product-term-based local feedback path. The 240-pin RQFP package is a surface-mount gull-wing variant with a 0.500 mm terminal pitch.
Typical applications include industrial automation controllers, telecommunications line cards, peripheral bus interface bridges, legacy peripheral glue logic, and consumer electronics requiring deterministic sub-25 ns logic response. Designers favor the MAX 9000 series for power-up instant-on behavior (no external boot PROM required), making it ideal for systems that must begin operation immediately after VCC is applied.
When designing, ensure monotonic VCC rise per Altera's Operating Requirements; during transitions I/O pins may undershoot to -2.0 V or overshoot to 7.0 V for periods shorter than 20 ns under no-load conditions. A robust decoupling network (one 0.1 uF per VCC/ground pair, plus bulk) is required to keep internal frequency up to 145 MHz. Industrial-grade operation is supported from -40 C to +85 C.
This page synthesizes distributor pricing, drop-in alternatives from the same MAX 9000 family, and practical design notes not found on a single manufacturer product page, giving engineers a single decision-ready reference for sourcing, replacement, and design-in decisions.
드롭인 대체품: EPM9560RI240-15 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EPM9560RI240-15 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Device Type, Pin-to-Pin Propagation Delay, In-System Programmability, Logic Family.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EPM9560RI240-10
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →EPM9560RI240-20
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →EPM9560RC240-15
✅ 드롭인✓ 재고 있음
$174.72 / 개
데이터시트 보기 →EPM9480RI240-15
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EPM9560ARI240-10
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →EPM9560ARC240-10
✅ 드롭인✓ 재고 있음
$28.8 / 개
데이터시트 보기 →EPM9560RI240-15 최대 정격 & 전기적 특성
| Product Type | EE PLD (Electrically Erasable Programmable Logic Device) |
| Family | MAX 9000 |
| Macrocells | 560 |
| Flip-Flops | 772 |
| User I/Os (industrial grade) | 191 |
| Dedicated Inputs | 4 |
| Propagation Delay (tPD) | 15 ns (speed grade -15) |
| Internal Frequency (max) | 145 MHz |
| Logic Family / Process | CMOS, EEPROM-based |
| Core Voltage | 5.0 V |
| I/O Voltage | 3.3 V or 5.0 V (configurable) |
| Architecture | Multiple Array MatriX (MAX), 3rd generation |
| 패키지 | RQFP-240 (Power Quad Flat Pack, gull-wing, 0.500 mm pitch) |
| 실장 유형 | Surface Mount |
| 동작 온도 | -40 C to +85 C (industrial) |
| In-System Programmability | Yes, JTAG (IEEE Std 1149.1) |
| Power-Up Configuration | Instant-on (no external boot PROM) |
| I/O Undershoot Tolerance | -2.0 V for <20 ns (no-load) |
| I/O Overshoot Tolerance | 7.0 V for <20 ns (no-load) |
EPM9560RI240-15 rqfp-240 (power quad flat pack, gull-wing, 0.500 mm pitch) 핀 구성 가이드
EPM9560RI240-15(rqfp-240 (power quad flat pack, gull-wing, 0.500 mm pitch) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EPM9560RI240-15.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EPM9560RI240-15 적합 용도: 6 애플리케이션s: Industrial Automation Controllers, Telecommunications Line Cards, Legacy Peripheral Bus Bridge, Peripheral Glue Logic Replacement, Consumer Electronics Control Logic, Military / Aerospace Legacy Systems.
Industrial Automation Controllers
The EPM9560RI240-15 is well suited to industrial automation controllers, where 560 macrocells provide ample capacity for combinational and sequential glue logic, state machines, and peripheral decoders. The 15 ns tPD and 145 MHz internal frequency support deterministic response in motor-control, sensor-fusion, and PLC backplane designs. Industrial -40 C to +85 C operation tolerates factory floor environments, and the 191 user I/Os allow direct connection to many sensors, optoisolators, and actuator drivers without external buffer ICs.
추천
Telecommunications Line Cards
In telecommunications line cards, the EPM9560RI240-15 provides the timing-critical glue logic, bus arbitration, and protocol conversion functions that ASICs and ASSPs cannot economically cover. The 5 ns-pin-to-pin combinational delay budget and 191 I/Os allow direct interfacing with T1/E1 framers, framers, and TDM switches. The instant-on non-volatile EEPROM configuration eliminates boot-PROM complexity, an important advantage when line-card slot count runs into the hundreds.
추천
Legacy Peripheral Bus Bridge
The EPM9560RI240-15 is a strong fit for legacy peripheral bus bridge designs, such as ISA-to-PCI bridges, SCSI termination controllers, and VMEbus interface logic, where 560 macrocells provide generous headroom for state machines and address decoders. The 15 ns propagation delay aligns with 33 MHz PCI timing budgets. The dual 3.3 V/5.0 V I/O ring enables direct connection to legacy 5 V peripherals and modern 3.3 V ASICs on the same board without external level shifters.
추천
Peripheral Glue Logic Replacement
The EPM9560RI240-15 can replace 5 to 10 discrete PAL/GAL devices in a typical glue-logic design, simplifying board layout, reducing BOM cost, and improving testability. Each macrocell supports D, T, JK, or SR flip-flops, so the part can absorb the entire address decoder, chip-select generator, and wait-state logic in one device. The 191 I/Os match the count of typical 22V10 plus 16V8 plus discrete logic replacements without I/O starvation.
추천
Consumer Electronics Control Logic
The EPM9560RI240-15 is a good choice for consumer electronics control logic such as set-top box front panels, A/V receiver display controllers, and printer engine controllers. Its 145 MHz internal frequency supports video-mode timing generation, and the 191 I/Os allow direct key-matrix scanning and LED multiplexing. JTAG in-system programming enables last-minute firmware updates during manufacturing without re-flowing the part.
추천
Military / Aerospace Legacy Systems
The EPM9560RI240-15 is found in many long-life military and aerospace systems where redesign is cost-prohibitive. The industrial -40 C to +85 C rating covers most MIL-STD-810 environmental profiles, and the EEPROM-based non-volatile configuration provides instant-on operation critical to avionics and defense applications. Long-term obsolescence management programs maintain second-source supply through brokers, but new designs should not adopt this part for new platforms.
추천
추천 제품 요약
엔지니어링 참조 데이터: EPM9560RI240-15 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EPM9560RI240-10 | EPM9560RI240-20 | EPM9560RC240-15 | EPM9480RI240-15 | EPM9560ARI240-10 | EPM9560ARC240-10 |
|---|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | RQFP-240 | RQFP-240 - same | RQFP-240 - same | RQFP-240 - same | RQFP-240 - same | RQFP-240 - same | RQFP-240 - same |
| Macrocells | 560 | 560 | 560 | 560 | 480 (-14%) | 560 | 560 |
| Propagation Delay (tPD) | 15 ns | 10 ns (faster) | 20 ns (slower) | 15 ns | 15 ns | 10 ns (faster) | 10 ns (faster) |
| Operating Temperature | -40 C to +85 C (industrial) | -40 C to +85 C | -40 C to +85 C | 0 C to +70 C (commercial) | -40 C to +85 C | -40 C to +85 C | 0 C to +70 C (commercial) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
| Param Match | 100% (self) | 100% | 90% | 90% | 90% | 100% | 90% |
주요 차별점
- Industrial temperature range for harsh environments (vs EPM9560RC240-15)
- Mid-tier speed grade for power/timing balance (vs EPM9560RI240-20)
- Higher macrocell density than EPM9480 family (vs EPM9480RI240-15)
설계 노트
Estimated: at 145 MHz internal frequency, the EPM9560RI240-15 can draw 200-400 mA from the 5.0 V core supply depending on toggle rate and I/O loading. Place one 0.1 uF X7R ceramic decoupling capacitor within 3 mm of every VCC/ground pair, plus a 10 uF tantalum bulk capacitor near the package. Monotonic VCC rise per Altera's Operating Requirements is mandatory - use a MAX809-style reset supervisor or RC delay if your power-on ramp can stall or sag.
The 240-pin RQFP uses a 0.500 mm gull-wing lead pitch on a 32 mm x 32 mm body. Use a 4-layer PCB with continuous power and ground planes directly under the device for return-path integrity. Route all four dedicated inputs (IN1-IN4) with 50 ohm controlled impedance, and place series termination resistors within 5 mm of the CPLD pin when driving long transmission lines. Keep JTAG signals (TDI, TDO, TMS, TCK) away from clock and high-speed I/O to avoid programming interference.
Do not exceed the I/O undershoot specification of -2.0 V for periods shorter than 20 ns (no-load) or the overshoot specification of 7.0 V for the same duration. Add external clamping diodes if your application drives inductive loads. Also, when migrating between speed grades (-10, -15, -20), remember to update the Quartus project speed-grade setting, otherwise timing analysis will be pessimistic. Finally, confirm VCCIO voltage level (3.3 V or 5.0 V) is stable before JTAG programming.
규정 준수 정보
RoHS and lead-free status depend on date-code and lot. Abacus Technologies documents REACH compliance for the equivalent EPM9560RI240-20. Request a Certificate of Compliance (CoC) from your distributor before designing in for RoHS-bound applications.
