Maxim Integrated

ICL7137CMH+D - 3.5-Digit LED Display ADC | Maxim Integrated

부품 번호: ICL7137CMH+D ✓ 활성
<200 µA Vdss 44-pin MQFP, 10 mm × 10 mm Package
MOQ: 1 |

ICL7137CMH+D 개요

Analog Devices ICL7137CMH+D is a low-power, 3.5-digit dual-slope analog-to-digital converter designed to drive a seven-segment LED display directly. The device operates from a single 5 V supply, consumes less than 200 µA excluding LED display current, and is packaged in a 44-pin MQFP measuring 10 mm by 10 mm. These characteristics make it suitable for precision panel meters, laboratory instruments, and portable measurement equipment.

An ADC is an integrated circuit that converts an analog voltage into a digital value. The ICL7137 belongs to the ADC hierarchy and combines analog measurement, digital counting, reference-voltage control, and LED display-drive circuitry in one package. Its dual-slope conversion technique integrates the input over fixed time intervals, reducing sensitivity to short disturbances and supporting accurate measurement with comparatively simple external circuitry.

The principal features include direct seven-segment LED display drive, a 3.5-digit measurement format, low battery-oriented supply consumption below 200 µA, and integrated conversion and counting functions. Excluding current drawn by the LEDs, the low supply demand is particularly important in handheld meters where the converter must remain active for extended periods. The commercial temperature version is specified for 0 °C to 70 °C.

Technical operation is based on dual-slope conversion rather than a conventional successive-approximation converter. During conversion, the device integrates the unknown input and a reference-derived ramp, then determines the balance between them through counting. This architecture is well suited to panel-meter applications because it provides good rejection of periodic noise and requires only an input integrator, reference integration path, clock, and display interface.

Typical uses include digital bench multimeters, laboratory panel meters, digital thermometers, laboratory displays, and portable instrumentation. The integrated LED-drive outputs reduce the number of external display-interface components, while the low converter supply current supports battery-operated products. A 10 mm by 10 mm square surface-mount package also supports compact instrument designs without using a large through-hole footprint.

The main PCB consideration is to keep the analog input, reference, and compensation connections short and away from digital display lines. The external reference network and timing components directly affect accuracy and conversion behavior, so they should follow the manufacturer application diagram and use stable, low-temperature-drift parts. Adequate decoupling is also required near the supply pins.

This product page organizes the ICL7137CMH+D specifications, verified manufacturer and distributor references, same-footprint alternatives, and application guidance. It also highlights practical selection trade-offs involving display type, interface behavior, package configuration, operating temperature, and the need to validate every substitute against the original circuit schematic.

드롭인 대체품: ICL7137CMH+D — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: ICL7137CMH+D (동일 폼 팩터 및 풋프린트) — 차이점: Package, Mounting Type, Package Dimensions, Conversion Technique, Converter Type.

Renesas Electronics
Package Dimensions: 10 x 10 mm
비교 대상: ICL7137CMH+D →
Analog Devices
Package: 44-pin PLCC, 16.59 mm × 16.59 mm
Mounting Type: Through-hole
Converter Type: Dual-slope analog-to-digital converter
비교 대상: ICL7137CMH+D →
Analog Devices
Package Dimensions: 10 mm x 10 mm
비교 대상: ICL7137CMH+D →
Maxim Integrated
Package: 44-pin MQFP
Package Dimensions: 10 x 10 mm
Conversion Technique: Dual-slope
비교 대상: ICL7137CMH+D →

ICL7137CMH+TD

✅ 드롭인
📦 44-MQFP (10x10 mm)
Same ICL7137 family and 44-pin MQFP footprint; temperature-grade suffix differs by up to 35 °C across the compared range

📋 참조 대체품 (카탈로그에 없음)

ICL7136CMH+D

✅ 드롭인
📦 44-MQFP (10x10 mm)
Same 3.5-digit converter class and 44-pin MQFP footprint; display-drive interface differs for the ICL7136 versus LED-focused ICL7137

📋 참조 대체품 (카탈로그에 없음)

ICL7117CMH+D

✅ 드롭인 ⚠️ 사양 미검증
Analog Devices
📦 44-MQFP (10x10 mm)
3.5 digits · Dual-slope · Yes · 44-pin MQFP, gull wing · 10 mm x 10 mm · 44 pins · Surface mount · Commercial

가격 문의

데이터시트 보기 →

ICL7107CQH+D

✅ 드롭인 ⚠️ 사양 미검증
Analog Devices
📦 44-MQFP (10x10 mm)
Dual-slope analog-to-digital converter · 3.5 digits · Direct LED display drive · 1 channel · Polarity driver, digit drivers, segment decoders, voltage reference, and clock circuit · 44-pin PLCC, 16.59 mm × 16.59 mm · 44 pins

가격 문의

데이터시트 보기 →

ICL7106CM44

✅ 드롭인 ⚠️ 사양 미검증
Renesas Electronics
📦 44-MQFP (10x10 mm)
3.5 digits · 3.5-digit A/D converter · Multiplexed LCD drive · Seven-segment decoder · LCD driver with multiplexed backplane drive · Internal reference · Internal clock · Low-power A/D converter

가격 문의

데이터시트 보기 →

ICL7137CMH+D 최대 정격 & 전기적 특성

기능 3.5-digit dual-slope ADC with direct LED display drive
Conversion Technique Dual-slope integration
Display Resolution 3.5 digits
Supply Current Excluding LED Current <200 µA
입력 전압 범위 2.6 V to 3.2 V
Effective Output Resolution 23 bit
Linearity Error 0%
Output Code Binary
동작 온도 범위 0 °C to 70 °C
Temperature Grade Commercial
패키지 44-pin MQFP, 10 mm × 10 mm
Terminal Form Gull wing
Package Shape Square
실장 유형 Surface mount
Integrated Display Driver Direct seven-segment LED display drive

ICL7137CMH+D square 핀 구성 가이드

ICL7137CMH+D(square 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

ICL7137CMH+D의 square 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ICL7137CMH+D.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ICL7137CMH+D 적합 용도: 6 애플리케이션s: Digital Bench Multimeter, Laboratory Panel Meter, Battery-Powered Digital Thermometer, Process Monitoring Display, Portable Measurement Instrument, LED Display Test and Measurement Unit.

🔧

Digital Bench Multimeter

The ICL7137CMH+D suits a digital bench multimeter because it combines a 3.5-digit dual-slope measurement system with direct seven-segment LED display drive. The converter's supply current below 200 µA, excluding LED current, leaves a useful low-power budget for instrument electronics that are continuously connected to mains power. Its 44-pin MQFP package provides enough interface pins for the converter, reference, timing, and display functions without requiring a separate LED driver. During layout, keep the analog input and reference network away from display outputs, and follow the manufacturer reference circuit for compensation and integration components.

🏭

Laboratory Panel Meter

The ICL7137CMH+D is appropriate for laboratory panel meters that require a stable three-and-a-half-digit display and direct LED drive. The dual-slope architecture is well matched to slow-moving instrument readings where good rejection of periodic interference is useful. Converter supply current below 200 µA helps control self-heating in dense laboratory instruments, although the external display current must be included in the complete power budget. The 10 mm by 10 mm surface-mount package simplifies compact front-panel assemblies, while short reference and analog traces are necessary to preserve measurement accuracy.

🩺

Battery-Powered Digital Thermometer

The ICL7137CMH+D can form the measurement and display core of a battery-powered digital thermometer. Its converter consumes less than 200 µA excluding the LEDs, allowing more of a limited battery budget to remain available for sensing and control circuitry. The direct seven-segment LED outputs reduce the need for a separate display-driver package in a compact handheld instrument. Designers should choose an appropriately stable reference network, account for sensor and probe resistance, and prevent LED current from disturbing the analog input. Switching the display off when readings are not visible can further extend operating time.

🏭

Process Monitoring Display

The ICL7137CMH+D is useful in a process-monitoring instrument that presents a measured analog quantity as a direct LED value. The integrated display drive supports a straightforward panel layout, while the 3.5-digit format is appropriate for many pressure, level, and general industrial measurements. The dual-slope conversion method averages the input over its measurement interval, which can improve rejection of repetitive interference in an enclosure containing switching equipment. Keep high-current relay and display-return paths away from the analog inputs, use a dedicated analog ground strategy, and validate accuracy across temperature before calibration.

📱

Portable Measurement Instrument

The ICL7137CMH+D fits portable measurement instruments where continuous LCD or LED readout is needed without a large display-driver subsystem. The converter's under-200 µA operating current excluding LED load is compatible with a compact battery-powered architecture, and the square 44-pin MQFP preserves board area compared with a larger through-hole implementation. The display brightness should be selected for the required ambient-light visibility without making the LEDs dominate the power budget. For reliable portable operation, include the converter's warm-up, reference, and calibration requirements in the instrument's measurement-error budget.

📺

LED Display Test and Measurement Unit

The ICL7137CMH+D can be used in a specialized display test unit that presents a controlled analog input on an integrated seven-segment LED readout. Because the converter and display interface occupy the same package, a compact instrument can provide a direct numerical result without requiring a separate display controller. Its 0 °C to 70 °C commercial operating range is appropriate for standard indoor laboratory and service equipment. The input network, reference voltage, and clock components must be selected for the intended accuracy, and the PCB should reserve a quiet analog region to prevent display switching transients from coupling into the measurement path.

What is the ICL7137CMH+D?
The ICL7137CMH+D is a 3.5-digit, dual-slope analog-to-digital converter with integrated seven-segment LED display drive. According to the Analog Devices ICL7137 manufacturer datasheet, it uses less than 200 µA of supply current when LED current is excluded, making it appropriate for battery-powered panel meters and portable instruments. The device is supplied in a 44-pin MQFP measuring 10 mm by 10 mm.
Where can I download the ICL7137CMH+D datasheet PDF?
The authoritative ICL7137CMH+D documentation is available through the Analog Devices ICL7137 product page at https://www.analog.com/en/products/icl7137.html. The manufacturer product page links to the device datasheet, ordering information, and technical documentation. Use the ICL7137 family datasheet to confirm the complete pin-description table, recommended application circuit, external component values, and electrical limits before laying out or modifying a board.
What is the pinout of the ICL7137CMH+D?
The ICL7137CMH+D uses a 44-pin square MQFP package with gull-wing leads. The product is offered as a direct LED-display ADC, and its manufacturer datasheet contains the authoritative pin-description table. Before assigning PCB tracks, check the pin-number table for analog inputs, reference connections, converter timing components, display outputs, and supply pins. Package orientation must also follow the pin-1 marker shown on the physical package.
How much current does the ICL7137CMH+D consume?
The ICL7137CMH+D consumes less than 200 µA from its supply when the current used by the LED display is excluded. According to the Analog Devices ICL7137 manufacturer datasheet, this low converter supply current makes the device suitable for battery operation. Total system demand will be higher because the external display LEDs and any indicator lamps add their own current.
What is the difference between ICL7137CMH+D and ICL7136CMH+D?
The ICL7137CMH+D is optimized for direct LED display drive, while the ICL7136CMH+D serves a different display-interface role within the ICL713x family. Both appear in the same 44-pin MQFP product family and can be considered for PCB reuse, but display polarity, interface requirements, and board-level timing must be checked. According to the manufacturer ICL7137 documentation, the ICL7137 directly interfaces with LED displays.
ICL7137CMH+D vs ICL7117CMH+D: which converter is better for a panel meter?
Choose the ICL7137CMH+D when the meter requires direct seven-segment LED display drive and a 3.5-digit measurement format. The ICL7117CMH+D belongs to the same Analog Devices family and the same 44-pin MQFP footprint, making it useful for an existing ICL7117-based design or a qualified board reuse. Final selection should verify reference voltage, input range, display polarity, timing, and every connected pin against the relevant datasheet.
When should I choose the ICL7137CMH+D over another ICL713x converter?
Choose the ICL7137CMH+D when the design requires a low-power, 3.5-digit converter with direct LED display outputs. It is particularly suitable for handheld and bench panel meters because converter supply current is below 200 µA excluding LED load. Select a different family member when the display is LCD, the required resolution differs, or the existing board uses a different interface arrangement that cannot be changed.
Is the ICL7137CMH+D suitable for battery-powered instruments?
Yes, the ICL7137CMH+D is suitable for battery-powered instruments because its supply current is below 200 µA when LED display current is excluded. According to the Analog Devices ICL7137 manufacturer datasheet, this operating characteristic supports low-power battery operation. Battery life calculations must include conversion frequency, reference circuitry, control electronics, and the external LED current rather than relying on converter consumption alone.
What is the best drop-in replacement for the ICL7137CMH+D?
The closest drop-in candidates are same-package members of the ICL713x family, particularly ICL7136CMH+D and ICL7137CMH+TD, provided their electrical ratings and interface behavior satisfy the circuit. The ICL7137CMH+TD is the closest same-family alternative, while ICL7136CMH+D may require display-interface review. Validate pin compatibility, reference voltage, input range, temperature grade, and LCD-versus-LED behavior before releasing a substitution.
Can ICL7137CMH+D replace ICL7136CMH+D?
The ICL7137CMH+D can serve as a candidate replacement for an ICL7136CMH+D board because both use the same 44-pin MQFP family footprint, but it is not automatically a functional drop-in. The ICL7137 is specified for direct LED display drive, while display behavior differs across the ICL713x family. Review the original schematic and both datasheets, particularly display outputs, input polarity, reference connections, and timing components.
Where can I buy the ICL7137CMH+D online?
Use the Request a Quote form on this page to inquire about the ICL7137CMH+D, current availability, minimum order quantity, and lead time. The Analog Devices manufacturer product page provides the authoritative product documentation and ordering context. Quote requests allow the exact suffix and package to be confirmed before procurement, avoiding ambiguity between different ICL7137 package, temperature, and lead-finishing options.
What is the current price of the ICL7137CMH+D?
The current commercial price and available quantity should be obtained through the Request a Quote form on this page. The form is tied to the exact ICL7137CMH+D orderable MPN, allowing procurement to confirm the package configuration and supply conditions. Inventory and pricing can change, so an inquiry is more reliable than relying on a historical listing or an incomplete quantity-break table.
What is the lead time and stock status for the ICL7137CMH+D?
Request current stock, minimum order quantity, and lead time through the Request a Quote form on this page. The exact suffix ICL7137CMH+D identifies the commercial-temperature, 44-pin MQFP configuration, while procurement will confirm available supply. For new production designs, schedule the sourcing check early because a distributor listing alone does not guarantee a project-specific delivery schedule.
Is the ICL7137CMH+D in stock?
Current ICL7137CMH+D stock status should be confirmed through the Request a Quote form on this page. The form can capture the required quantity and provide an orderable response for the exact 44-pin MQFP suffix. Treat any general distributor inventory statement as changing information rather than a guaranteed allocation, and include your scheduled assembly date in the request.
What are the key specifications of the ICL7137CMH+D that engineers should know?
The ICL7137CMH+D combines a 3.5-digit dual-slope ADC, direct seven-segment LED display drive, and low-power operation in a 44-pin MQFP package. According to the Analog Devices manufacturer datasheet, supply current is under 200 µA excluding LED current, while the commercial-grade operating range is 0 °C to 70 °C. Its 10 mm by 10 mm gull-wing surface-mount package supports compact instruments but requires careful analog and digital layout separation.

엔지니어링 참조 데이터: ICL7137CMH+D — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the ICL7137CMH+D when the design requires a low-power, 3.5-digit converter with direct seven-segment LED drive and a 44-pin MQFP footprint. It is a strong fit for panel meters, digital multimeters, thermometers, and portable laboratory instruments. Choose ICL7137CMH+TD when you want the closest same-family ordering option and have verified that its temperature, tape-and-reel, and lead-finishing attributes satisfy the assembly. Consider ICL7136CMH+D for a board based on the ICL7136 display interface, but verify polarity and pin behavior before substitution. ICL7117CMH+D is appropriate when an existing ICL7117 design can be retained after checking reference and display requirements. ICL7107CQH+D and ICL7106CM44 provide 44-pin family migration paths, but they require a complete comparison of input range, reference voltage, timing, display outputs, and external component values. For any candidate, verify the manufacturer datasheet, application circuit, operating temperature, and lifecycle status before releasing the PCB or BOM.

대체품과의 비교

파라미터 이 제품 ICL7137CMH+TD ICL7136CMH+D ICL7117CMH+D ICL7107CQH+D ICL7106CM44
Package 44-MQFP (10x10 mm) 44-MQFP (10x10 mm) - same 44-MQFP (10x10 mm) - same 44-MQFP (10x10 mm) - same 44-MQFP (10x10 mm) - same 44-MQFP (10x10 mm) - same
Brand Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated
Function 3.5-digit dual-slope LED display ADC 3.5-digit dual-slope LED display ADC 3.5-digit display converter with different display interface 3.5-digit low-power converter 3.5-digit display converter 3.5-digit dual-slope converter
Conversion Technique Dual-slope integration Dual-slope integration Dual-slope integration Dual-slope integration Dual-slope integration Dual-slope integration
Display Format 3.5 digits 3.5 digits 3.5 digits 3.5-digit family 3.5-digit family 3.5-digit family
Temperature Grade Commercial Commercial Commercial Commercial Commercial Commercial
Operating Temperature Range 0 °C to 70 °C 0 °C to 70 °C 0 °C to 70 °C 0 °C to 70 °C 0 °C to 70 °C 0 °C to 70 °C
Package Pin Count 44 pins 44 pins 44 pins 44 pins 44 pins 44 pins
Lead Form Gull wing Gull wing Gull wing Gull wing Gull wing Gull wing
Integrated Display Drive Direct seven-segment LED drive Direct seven-segment LED drive Different display interface Display-interface functionality Display-interface functionality Display-interface functionality

주요 차별점

  • Direct seven-segment LED display integration (vs ICL7136CMH+D)
  • Low converter supply demand (vs ICL7107CQH+D)
  • Same-package family consolidation (vs ICL7106CM44)
  • Close same-family replacement path (vs ICL7137CMH+TD)

설계 노트

Separate the analog and digital regions of the PCB. Route the analog input, reference input, reference output, and compensation connections away from display-driver outputs, clock lines, and external supply wiring. Place input and reference capacitors close to their associated device pins with short return paths. The manufacturer reference schematic provides the authoritative component placement and grounding topology, which should be adapted to the enclosure and display-current requirements rather than copied without considering return currents.

Calculate the complete power budget from converter consumption, reference circuitry, control logic, and LED current. The ICL7137CMH+D uses less than 200 µA excluding display LED current, but the LEDs can consume substantially more during multiplexed operation. Select resistor values that provide readable digits without unnecessary current, verify the duty cycle used by the display, and ensure the supply regulator has adequate transient margin when the digit outputs switch.

Do not assume that every 44-pin ICL713x-family device is electrically interchangeable. Display polarity, reference configuration, conversion timing, and connected external components can differ even when the package and pin count match. For each proposed alternative, compare the complete pin table, input range, reference requirements, output-drive behavior, temperature grade, and display interface. ICL7136CMH+D is the closest functionally different candidate for review, while ICL7137CMH+TD is the closest same-family option.

Preserve the accuracy of the reference and analog-input paths by minimizing loop area and avoiding shared copper with display-return currents. If the instrument uses relays, motors, or high-current LEDs, provide a controlled return-current path and add filtering at the connector entry point. Check the reference network for temperature drift and ensure that test leads, sensor wiring, and grounding do not introduce errors comparable to the selected display resolution.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The product is listed with the +D ordering suffix, but explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements were not present in the referenced product records. AEC-Q100 is not applicable because this is a commercial-grade analog data-conversion IC rather than an automotive-qualified device.

데이터 검증일: 2026-11-20 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

ICL7137CMH+D datasheet ICL7137CMH+D pinout ICL7137CMH+D datasheet pdf ICL7137CMH+D equivalent ICL7137CMH+D replacement ICL7137CMH+D cross reference ICL7137CMH+D price ICL7137CMH+D stock ICL7137CMH+D application circuit ICL7137CMH+TD vs ICL7137CMH+D Maxim ICL7137CMH+D 3.5 digit LED display ADC 44 MQFP panel meter ADC ICL7137 low power battery ADC

관련 부품 & 용어

Maxim Integrated Analog Devices ICL7137CMH+D ICL7137CMH+TD ICL7136CMH+D ICL7117CMH+D ICL7107CQH+D ICL7106CM44 analog-to-digital converter ADC dual-slope ADC 3.5-digit ADC seven-segment LED display display driver LED display drive MQFP-44 QFP family surface-mount package SMD battery operation panel meter digital multimeter instrumentation amplifier reference voltage integration capacitor
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기