ICL7137CMH+D - 3.5-Digit LED Display ADC | Maxim Integrated
MPN: ICL7137CMH+D ✓ AktifICL7137CMH+D Genel Bakış
An ADC is an integrated circuit that converts an analog voltage into a digital value. The ICL7137 belongs to the ADC hierarchy and combines analog measurement, digital counting, reference-voltage control, and LED display-drive circuitry in one package. Its dual-slope conversion technique integrates the input over fixed time intervals, reducing sensitivity to short disturbances and supporting accurate measurement with comparatively simple external circuitry.
The principal features include direct seven-segment LED display drive, a 3.5-digit measurement format, low battery-oriented supply consumption below 200 µA, and integrated conversion and counting functions. Excluding current drawn by the LEDs, the low supply demand is particularly important in handheld meters where the converter must remain active for extended periods. The commercial temperature version is specified for 0 °C to 70 °C.
Technical operation is based on dual-slope conversion rather than a conventional successive-approximation converter. During conversion, the device integrates the unknown input and a reference-derived ramp, then determines the balance between them through counting. This architecture is well suited to panel-meter applications because it provides good rejection of periodic noise and requires only an input integrator, reference integration path, clock, and display interface.
Typical uses include digital bench multimeters, laboratory panel meters, digital thermometers, laboratory displays, and portable instrumentation. The integrated LED-drive outputs reduce the number of external display-interface components, while the low converter supply current supports battery-operated products. A 10 mm by 10 mm square surface-mount package also supports compact instrument designs without using a large through-hole footprint.
The main PCB consideration is to keep the analog input, reference, and compensation connections short and away from digital display lines. The external reference network and timing components directly affect accuracy and conversion behavior, so they should follow the manufacturer application diagram and use stable, low-temperature-drift parts. Adequate decoupling is also required near the supply pins.
This product page organizes the ICL7137CMH+D specifications, verified manufacturer and distributor references, same-footprint alternatives, and application guidance. It also highlights practical selection trade-offs involving display type, interface behavior, package configuration, operating temperature, and the need to validate every substitute against the original circuit schematic.
Drop-in alternatifler için ICL7137CMH+D — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller ICL7137CMH+D (aynı form faktörü ve ayağa oturma) — farklı olan Package, Mounting Type, Package Dimensions, Conversion Technique, Converter Type.
ICL7137CMH+TD
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
ICL7136CMH+D
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
ICL7117CMH+D
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ICL7107CQH+D
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ICL7106CM44
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ICL7137CMH+D Maksimum Değerlendirmeler & Elektriksel Özellikler
| Fonksiyon | 3.5-digit dual-slope ADC with direct LED display drive |
| Conversion Technique | Dual-slope integration |
| Display Resolution | 3.5 digits |
| Supply Current Excluding LED Current | <200 µA |
| Giriş电压范围 | 2.6 V to 3.2 V |
| Effective Output Resolution | 23 bit |
| Linearity Error | 0% |
| Output Code | Binary |
| İşletim Sıcaklığı Aralığı | 0 °C to 70 °C |
| Temperature Grade | Commercial |
| Paket | 44-pin MQFP, 10 mm × 10 mm |
| Terminal Form | Gull wing |
| Package Shape | Square |
| Montaj Türü | Surface mount |
| Integrated Display Driver | Direct seven-segment LED display drive |
ICL7137CMH+D square Pin Yapısı Kılavuzu
ICL7137CMH+D (square paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: ICL7137CMH+D.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
ICL7137CMH+D için uygundur 6 uygulamas: Digital Bench Multimeter, Laboratory Panel Meter, Battery-Powered Digital Thermometer, Process Monitoring Display, Portable Measurement Instrument, LED Display Test and Measurement Unit.
Digital Bench Multimeter
The ICL7137CMH+D suits a digital bench multimeter because it combines a 3.5-digit dual-slope measurement system with direct seven-segment LED display drive. The converter's supply current below 200 µA, excluding LED current, leaves a useful low-power budget for instrument electronics that are continuously connected to mains power. Its 44-pin MQFP package provides enough interface pins for the converter, reference, timing, and display functions without requiring a separate LED driver. During layout, keep the analog input and reference network away from display outputs, and follow the manufacturer reference circuit for compensation and integration components.
Önerilen
Laboratory Panel Meter
The ICL7137CMH+D is appropriate for laboratory panel meters that require a stable three-and-a-half-digit display and direct LED drive. The dual-slope architecture is well matched to slow-moving instrument readings where good rejection of periodic interference is useful. Converter supply current below 200 µA helps control self-heating in dense laboratory instruments, although the external display current must be included in the complete power budget. The 10 mm by 10 mm surface-mount package simplifies compact front-panel assemblies, while short reference and analog traces are necessary to preserve measurement accuracy.
Önerilen
Battery-Powered Digital Thermometer
The ICL7137CMH+D can form the measurement and display core of a battery-powered digital thermometer. Its converter consumes less than 200 µA excluding the LEDs, allowing more of a limited battery budget to remain available for sensing and control circuitry. The direct seven-segment LED outputs reduce the need for a separate display-driver package in a compact handheld instrument. Designers should choose an appropriately stable reference network, account for sensor and probe resistance, and prevent LED current from disturbing the analog input. Switching the display off when readings are not visible can further extend operating time.
Önerilen
Process Monitoring Display
The ICL7137CMH+D is useful in a process-monitoring instrument that presents a measured analog quantity as a direct LED value. The integrated display drive supports a straightforward panel layout, while the 3.5-digit format is appropriate for many pressure, level, and general industrial measurements. The dual-slope conversion method averages the input over its measurement interval, which can improve rejection of repetitive interference in an enclosure containing switching equipment. Keep high-current relay and display-return paths away from the analog inputs, use a dedicated analog ground strategy, and validate accuracy across temperature before calibration.
Önerilen
Portable Measurement Instrument
The ICL7137CMH+D fits portable measurement instruments where continuous LCD or LED readout is needed without a large display-driver subsystem. The converter's under-200 µA operating current excluding LED load is compatible with a compact battery-powered architecture, and the square 44-pin MQFP preserves board area compared with a larger through-hole implementation. The display brightness should be selected for the required ambient-light visibility without making the LEDs dominate the power budget. For reliable portable operation, include the converter's warm-up, reference, and calibration requirements in the instrument's measurement-error budget.
Önerilen
LED Display Test and Measurement Unit
The ICL7137CMH+D can be used in a specialized display test unit that presents a controlled analog input on an integrated seven-segment LED readout. Because the converter and display interface occupy the same package, a compact instrument can provide a direct numerical result without requiring a separate display controller. Its 0 °C to 70 °C commercial operating range is appropriate for standard indoor laboratory and service equipment. The input network, reference voltage, and clock components must be selected for the intended accuracy, and the PCB should reserve a quiet analog region to prevent display switching transients from coupling into the measurement path.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: ICL7137CMH+D — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | ICL7137CMH+TD | ICL7136CMH+D | ICL7117CMH+D | ICL7107CQH+D | ICL7106CM44 |
|---|---|---|---|---|---|---|
| Package | 44-MQFP (10x10 mm) | 44-MQFP (10x10 mm) - same | 44-MQFP (10x10 mm) - same | 44-MQFP (10x10 mm) - same | 44-MQFP (10x10 mm) - same | 44-MQFP (10x10 mm) - same |
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated |
| Function | 3.5-digit dual-slope LED display ADC | 3.5-digit dual-slope LED display ADC | 3.5-digit display converter with different display interface | 3.5-digit low-power converter | 3.5-digit display converter | 3.5-digit dual-slope converter |
| Conversion Technique | Dual-slope integration | Dual-slope integration | Dual-slope integration | Dual-slope integration | Dual-slope integration | Dual-slope integration |
| Display Format | 3.5 digits | 3.5 digits | 3.5 digits | 3.5-digit family | 3.5-digit family | 3.5-digit family |
| Temperature Grade | Commercial | Commercial | Commercial | Commercial | Commercial | Commercial |
| Operating Temperature Range | 0 °C to 70 °C | 0 °C to 70 °C | 0 °C to 70 °C | 0 °C to 70 °C | 0 °C to 70 °C | 0 °C to 70 °C |
| Package Pin Count | 44 pins | 44 pins | 44 pins | 44 pins | 44 pins | 44 pins |
| Lead Form | Gull wing | Gull wing | Gull wing | Gull wing | Gull wing | Gull wing |
| Integrated Display Drive | Direct seven-segment LED drive | Direct seven-segment LED drive | Different display interface | Display-interface functionality | Display-interface functionality | Display-interface functionality |
Ana Farklılayıcılar
- Direct seven-segment LED display integration (karşılaştırma:ICL7136CMH+D)
- Low converter supply demand (karşılaştırma:ICL7107CQH+D)
- Same-package family consolidation (karşılaştırma:ICL7106CM44)
- Close same-family replacement path (karşılaştırma:ICL7137CMH+TD)
Tasarım Notları
Separate the analog and digital regions of the PCB. Route the analog input, reference input, reference output, and compensation connections away from display-driver outputs, clock lines, and external supply wiring. Place input and reference capacitors close to their associated device pins with short return paths. The manufacturer reference schematic provides the authoritative component placement and grounding topology, which should be adapted to the enclosure and display-current requirements rather than copied without considering return currents.
Calculate the complete power budget from converter consumption, reference circuitry, control logic, and LED current. The ICL7137CMH+D uses less than 200 µA excluding display LED current, but the LEDs can consume substantially more during multiplexed operation. Select resistor values that provide readable digits without unnecessary current, verify the duty cycle used by the display, and ensure the supply regulator has adequate transient margin when the digit outputs switch.
Do not assume that every 44-pin ICL713x-family device is electrically interchangeable. Display polarity, reference configuration, conversion timing, and connected external components can differ even when the package and pin count match. For each proposed alternative, compare the complete pin table, input range, reference requirements, output-drive behavior, temperature grade, and display interface. ICL7136CMH+D is the closest functionally different candidate for review, while ICL7137CMH+TD is the closest same-family option.
Preserve the accuracy of the reference and analog-input paths by minimizing loop area and avoiding shared copper with display-return currents. If the instrument uses relays, motors, or high-current LEDs, provide a controlled return-current path and add filtering at the connector entry point. Check the reference network for temperature drift and ensure that test leads, sensor wiring, and grounding do not introduce errors comparable to the selected display resolution.
Uyumluluk Bilgisi
The product is listed with the +D ordering suffix, but explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements were not present in the referenced product records. AEC-Q100 is not applicable because this is a commercial-grade analog data-conversion IC rather than an automotive-qualified device.