Microchip Technology

KSZ8842-16MVLI - 2-Port 10/100 Ethernet Switch | Microchip

부품 번호: KSZ8842-16MVLI ✓ 활성
3.1 V Vdss IEEE 802.3, IEEE 802.3u, IEEE 802.3x Rds(on) 128-LQFP, 14 mm x 14 mm Package
MOQ: 1 |

KSZ8842-16MVLI 개요

The Microchip Technology KSZ8842-16MVLI is a two-port 10/100 Base-T Ethernet switch with a generic 8/16-bit parallel CPU interface, supplied in a 128-LQFP package measuring 14 mm by 14 mm. It combines two Fast Ethernet network ports with cable diagnostics, programmable LED indication, and a low-power mode in one integrated network-interface controller.

An Ethernet switch is a network-interface device that forwards Ethernet frames between attached ports while using a parallel host interface to exchange data and control information with an embedded processor. The KSZ8842 family sits within the Ethernet interface IC hierarchy: Ethernet switch controller, then network interface controller, then integrated interface circuit. Its 2-port arrangement supports compact embedded systems that require more than one wired-network connection without requiring a separate switch for each port.

The KSZ8842-16MVLI provides two 10/100 Base-T/TX ports, a generic 8/16-bit parallel interface, MII and cable-diagnostics support, programmable LED outputs, and a low-power operating mode. The listed operating supply range is 3.1 V to 3.5 V. These functions make it suitable for industrial controllers, embedded gateways, set-top equipment, and other systems that need two Fast Ethernet links connected through one parallel CPU bus.

The controller is intended for systems using a non-PCI parallel CPU interface. Its bus architecture allows 8-bit or 16-bit embedded-host operation, while the integrated switch manages communication between the two Ethernet ports. Because the device combines host-interface and network-switch functions, firmware must correctly configure port speed, duplex behavior, link status, and any low-power-mode transitions for its target platform.

The KSZ8842 family includes PCI and non-PCI CPU-interface implementations. The KSZ8842-16MVLI is the non-PCI, 8/16-bit parallel-interface member, so it should not be confused with the PCI-interface KSZ8842-PMQL or KSZ8842-PMBL variants. It also differs from 32-bit bus members of the same family, which target a wider host data path.

PCB implementation should preserve the 128-LQFP footprint and route the parallel bus, magnetics, Ethernet differential pairs, clock, reset, and control signals according to the manufacturer datasheet. Keep the Ethernet magnetics close to the corresponding ports and maintain controlled differential impedance to reduce reflections and radiated emissions.

This product record consolidates electrical limits, package information, interface functions, sourcing guidance, and verified replacement considerations. The comparison also distinguishes genuine footprint-compatible options from related family members whose bus width, port count, interface type, or package prevents unqualified drop-in use.

드롭인 대체품: KSZ8842-16MVLI — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: KSZ8842-16MVLI (동일 폼 팩터 및 풋프린트) — 차이점: Package, Product Type.

Microchip Technology
Package: 128-LQFP
비교 대상: KSZ8842-16MVLI →
Microchip Technology
Product Type: Single-port Ethernet MAC controller
비교 대상: KSZ8842-16MVLI →

KSZ8842-16MVL

✅ 드롭인
📦 128-LQFP (14x14)
Uses the base 16MVL ordering designation; the electrical target is KSZ8842-16MVLI with 2 ports, 100 Mb/s data rate, and a generic 8/16-bit bus, so no headline electrical difference is identified.

📋 참조 대체품 (카탈로그에 없음)

KSZ8842-16MVLI 최대 정격 & 전기적 특성

Product Type 2-Port 10/100 Ethernet Switch with Parallel CPU Interface
Number of Ethernet Ports 2 ports
Ethernet Data Rate 10/100 Mb/s per port
Ethernet Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3x
CPU Interface Generic 8/16-bit parallel bus
인터페이스 유형 Non-PCI parallel CPU interface
MII Support Supported
Cable Diagnostics Supported
Programmable LED Indication Supported
Low-Power Mode Supported
Minimum Supply Voltage 3.1 V
Maximum Supply Voltage 3.5 V
패키지 128-LQFP, 14 mm x 14 mm
실장 유형 Surface mount
Maximum Data Rate 100 Mb/s
핀 수 128 pins

KSZ8842-16MVLI 128-lqfp, 14 mm x 14 mm 핀 구성 가이드

KSZ8842-16MVLI(128-lqfp, 14 mm x 14 mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

KSZ8842-16MVLI의 128-lqfp, 14 mm x 14 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: KSZ8842-16MVLI.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

KSZ8842-16MVLI 적합 용도: 6 애플리케이션s: Industrial Ethernet Gateway, Embedded Network Bridge, Set-Top Network Endpoint, Cable Diagnostic Test Fixture, Low-Power Control Panel, Machine-to-Machine Connectivity.

🏭

Industrial Ethernet Gateway

The KSZ8842-16MVLI fits an industrial gateway that needs two 10/100 Mb/s Ethernet connections and a straightforward embedded host interface. One port can connect the gateway to a supervisory network while the second links a local machine or sensor network, reducing the need for separate Ethernet switch silicon. Its generic 8/16-bit parallel CPU interface is appropriate for processors that do not implement PCI, and the 3.1 V to 3.5 V supply range fits a regulated 3.3 V rail. Cable diagnostics and programmable LED indication help commissioning personnel identify wiring or link problems, while low-power mode can reduce consumption when the equipment is idle.

🌐

Embedded Network Bridge

The KSZ8842-16MVLI can serve as the forwarding element in a compact embedded Ethernet bridge. Its two switched 10/100 Mb/s ports allow one network segment to be connected to another through an embedded processor, rather than implementing two independent host-side PHYs. The generic 8/16-bit parallel interface provides a practical host path for a resource-constrained controller, and MII support expands integration options. Designers should allocate the 128-LQFP footprint correctly, preserve short Ethernet differential routes to the magnetics, and validate frame buffering, flow-control, and low-power transitions in the complete network design.

📺

Set-Top Network Endpoint

The KSZ8842-16MVLI is appropriate for set-top and consumer-network equipment that needs two Fast Ethernet paths through one controller. A service port can connect to a local management network while the second port carries access traffic, and the parallel CPU interface can serve embedded Linux or real-time control firmware. Programmable LEDs allow the enclosure indicators to show link, activity, or fault status, while cable diagnostics provide useful field troubleshooting. The main board-level consideration is the relatively large 128-LQFP footprint compared with compact single-port Ethernet controllers.

🔧

Cable Diagnostic Test Fixture

The KSZ8842-16MVLI can support an automated cable-test fixture because its Ethernet interface includes cable-diagnostics support and programmable LED indication. Two 10/100 Mb/s ports permit connection to test equipment and the cable under examination, while the generic 8/16-bit parallel interface transfers results to a test controller. The 3.1 V to 3.5 V operating range is compatible with a regulated 3.3 V test-board rail. Firmware should interpret the manufacturer's diagnostic status correctly and coordinate any remote-pair or link-state reporting, since the device is a network switch controller rather than a standalone cable tester.

🧩

Low-Power Control Panel

The KSZ8842-16MVLI fits network-enabled control panels that require two Ethernet connections but need to reduce activity during idle periods. Its low-power mode allows the system firmware to manage energy use without removing all network capability, while programmable LEDs can provide operator-visible link status. The generic 8/16-bit parallel interface avoids a PCI requirement and can connect to a modest embedded controller. Because the package exposes 128 leads, panel designers should confirm that the board has adequate routing density and place the device to shorten parallel-bus and Ethernet differential routes.

🏭

Machine-to-Machine Connectivity

The KSZ8842-16MVLI can support machine-to-machine connectivity where a controller must communicate over two 10/100 Mb/s Ethernet links. One link may connect supervisory equipment and the other a local machine controller, while diagnostics help identify cable faults during installation. The generic 8/16-bit parallel CPU interface is suitable for embedded processors without PCI, and a 3.3 V system rail aligns with the listed 3.1 V to 3.5 V supply range. For industrial deployment, verify operating-temperature limits, electromagnetic-emissions requirements, grounding, and isolation architecture in addition to the controller's electrical specifications.

추천 제품 요약

KSZ8842-16MVLI Microchip Technology 사용처: Industrial Ethernet Gateway, Embedded Network Bridge, Set-Top Network Endpoint, Cable Diagnostic Test Fixture, Low-Power Control Panel, Machine-to-Machine Connectivity KSZ8842-16MVL Base-ordering family alternative 사용처: Industrial Ethernet Gateway, Set-Top Network Endpoint, Machine-to-Machine Connectivity
What is the KSZ8842-16MVLI?
The KSZ8842-16MVLI is a Microchip Technology two-port 10/100 Mb/s Ethernet switch with a generic 8/16-bit parallel CPU interface. It is packaged in a 128-LQFP measuring 14 mm by 14 mm and adds MII support, cable diagnostics, programmable LED indication, and a low-power mode. According to the manufacturer product page, the KSZ8842 series includes PCI and non-PCI CPU-interface implementations, with the -16MVLI assigned to the non-PCI 8/16-bit bus family.
How many Ethernet ports does the KSZ8842-16MVLI have?
The KSZ8842-16MVLI provides two 10/100 Base-T/TX Ethernet ports. Its listed data rate is 100 Mb/s, and the associated Ethernet types are IEEE 802.3, IEEE 802.3u, and IEEE 802.3x. This two-port configuration is useful in embedded equipment that needs to connect a processor to a local network while also bridging another wired Ethernet segment.
What is the CPU interface on the KSZ8842-16MVLI?
The KSZ8842-16MVLI uses a generic 8/16-bit parallel CPU interface rather than a PCI interface. According to the KSZ8842 manufacturer documentation, the series contains PCI and non-PCI implementations, while this member belongs to the non-PCI group. Host firmware and board-level bus routing must therefore be designed for the parallel interface specified for the 8/16-bit bus variants.
What supply voltage does the KSZ8842-16MVLI require?
The KSZ8842-16MVLI operates from a 3.1 V minimum supply voltage to a 3.5 V maximum supply voltage. The listed component information identifies it as an LQFP Ethernet switch and indicates the 3.1 V to 3.5 V operating range. Use the manufacturer datasheet for the exact power-supply sequencing, decoupling, and absolute-maximum ratings during schematic and layout design.
Where can I download the KSZ8842-16MVLI datasheet PDF?
The official KSZ8842 datasheet is available through the Microchip Technology KSZ8842 product page at https://www.microchip.com/en-us/product/KSZ8842. Select the documentation for the non-PCI 8/16-bit M-series variant, including KSZ8842-16MVLI. The Octopart result at https://octopart.com/datasheet/microchip/KSZ8842-16MVLI also provides access to the current Microchip datasheet PDF.
Where is the KSZ8842-16MVLI pinout located?
The KSZ8842-16MVLI pinout is in the pin-description and package-drawing sections of the manufacturer datasheet for the KSZ8842M-series non-PCI CPU-interface devices. The device uses a 128-LQFP package with 14 mm by 14 mm body dimensions. Use the manufacturer pin table to assign power, ground, parallel-bus, management-interface, clock, reset, and Ethernet-signal functions on the PCB.
Is KSZ8842-16MVLI suitable for industrial equipment?
The KSZ8842-16MVLI can suit industrial controllers, embedded gateways, and other equipment requiring two 10/100 Mb/s Ethernet ports. Its 3.1 V to 3.5 V supply range, cable diagnostics, programmable LED indication, and low-power mode are useful for embedded networking designs. Confirm the exact operating-temperature limits, isolation requirements, and EMC obligations in the manufacturer datasheet before specifying it for a deployed industrial product.
What is the best drop-in replacement for KSZ8842-16MVLI?
The closest same-package alternative identified for the KSZ8842-16MVLI is the KSZ8842-16MVL, which uses the 16MVL device designation and retains the 2-port 10/100 switch and generic 8/16-bit bus architecture. The -TR suffix denotes a tape-and-reel ordering option rather than a different electrical design, so it is not counted as a separate functional alternative. Related KSZ8873 and KSZ8863 devices may have different interfaces or packages and should not be treated as drop-in replacements without complete pin-level verification.
What can replace the KSZ8842-16MVLI?
The KSZ8842-16MVL is the most direct replacement candidate because it represents the same 16MVL KSZ8842 device without the listed -I ordering suffix. It offers the same 2-port 10/100 Ethernet-switch family and generic 8/16-bit parallel CPU-interface concept. Before substitution, confirm the exact exposed pad, pin names, ordering code, temperature grade, and supply requirements against the manufacturer datasheet and the original BOM specification.
Is the KSZ8842-16MVLI the same as the KSZ8842-16MVLI-TR?
The KSZ8842-16MVLI and KSZ8842-16MVLI-TR identify the same electrical switch with different order packaging. The -TR designation is used for the tape-and-reel ordering option, while the base listing represents the device without that suffix. The manufacturer ordering information should be used to confirm reel quantity, carrier dimensions, and whether the suffix also changes grade or temperature options.
When should I choose the KSZ8842-16MVLI over a single-port Ethernet controller?
Choose the KSZ8842-16MVLI when the design needs two wired 10/100 Ethernet ports behind one generic 8/16-bit parallel host interface. A single-port controller is appropriate when only one physical network connection is required. The KSZ8842-16MVLI adds a second switched port, cable diagnostics, programmable LED indication, and low-power functionality, but its 128-LQFP footprint requires more routing and board area than many compact single-port devices.
KSZ8842-16MVLI vs KSZ8842-32MVLI: which should I select?
Select the KSZ8842-16MVLI for a host bus that supports the generic 8/16-bit parallel interface; the KSZ8842-32MVLI belongs to the family's 32-bit-bus design. The target device provides two 10/100 Mb/s Ethernet ports in a 128-LQFP package. The 32-bit member is not a pin-for-pin substitute unless the host logic, wiring, timing, and PCB have been designed specifically around its wider interface.
Can KSZ8873RLLI replace the KSZ8842-16MVLI?
The KSZ8873RLLI should not be assumed to be a direct replacement for the KSZ8842-16MVLI. Although both belong to the KSZ Ethernet-controller product line, a valid drop-in decision requires matching the CPU interface, port count, pin assignments, package, clock requirements, magnetic-interface arrangement, and operating voltage. Use the manufacturer cross-reference search and datasheets to verify every signal and footprint detail before considering that substitution.
Where can I buy the KSZ8842-16MVLI and check current stock?
Use the Request a Quote form on this page to request the current price, stock status, minimum order quantity, and lead time for the KSZ8842-16MVLI. The sourcing team can also confirm the required tape-and-reel or other order packaging. Avoid treating a distributor search-result stock message as a permanent inventory guarantee, because allocation and lead time can change.
What is the price of the KSZ8842-16MVLI?
The current commercial price for the KSZ8842-16MVLI should be requested through the Request a Quote form on this page. The form can confirm the quantity break, exact order suffix, and expected fulfillment conditions for the 128-LQFP device. Because market pricing and component allocation change frequently, use the structured quote workflow rather than relying on a historical or cached price.
What is the lead time for the KSZ8842-16MVLI?
The current lead time for the KSZ8842-16MVLI should be confirmed through the Request a Quote form on this page. Include your required quantity, target packaging, date code preference, and approved manufacturing schedule in the request. This allows the sourcing team to distinguish standard production availability from scheduled allocations or any longer lead time associated with a nonstandard order configuration.
What are the key specifications of KSZ8842-16MVLI that engineers should know?
The principal specifications are two 10/100 Mb/s Ethernet ports, a generic 8/16-bit parallel CPU interface, a 3.1 V to 3.5 V supply range, and a 128-LQFP 14 mm by 14 mm package. The controller also supports MII, cable diagnostics, programmable LED indication, and a low-power mode. Its Ethernet types are listed as IEEE 802.3, IEEE 802.3u, and IEEE 802.3x, making the part a two-port Fast Ethernet switch rather than a general-purpose Ethernet transceiver.

엔지니어링 참조 데이터: KSZ8842-16MVLI — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the KSZ8842-16MVLI when a design needs two switched 10/100 Mb/s Ethernet ports and the embedded host uses a generic 8/16-bit parallel CPU interface. Its non-PCI architecture, 3.1 V to 3.5 V supply range, cable diagnostics, programmable LED indication, and low-power mode make it especially relevant to industrial gateways, embedded bridges, and control equipment with two wired-network connections. The KSZ8842-16MVL is the closest base-ordering alternative when the exact suffix or tape-and-reel configuration is not required by the procurement system; it retains the same two-port, 8/16-bit-bus architecture and 128-LQFP footprint. Do not substitute the KSZ8842-32MVLI without redesigning the host bus because its 32-bit interface is materially different. Similarly, KSZ8873 and KSZ8863 family devices require a full review of interface type, package, port arrangement, pinout, clocking, and magnetics. For any alternative, compare the manufacturer datasheet pin tables and ordering information before approving a PCB-level substitution.

대체품과의 비교

파라미터 이 제품 KSZ8842-16MVL
Package 128-LQFP (14x14) 128-LQFP (14x14)
Brand Microchip Technology Microchip Technology
Ethernet Port Count 2 ports 2 ports
Data Rate 10/100 Mb/s 10/100 Mb/s
CPU Interface Generic 8/16-bit parallel bus Generic 8/16-bit parallel bus
CPU Interface Type Non-PCI Non-PCI
Supply Voltage Range 3.1 V to 3.5 V 3.1 V to 3.5 V
Cable Diagnostics Supported Supported
Programmable LED Indication Supported Supported
Low-Power Mode Supported Supported
Ethernet Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3x IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Mounting Type Surface mount Surface mount

주요 차별점

  • Combines two Fast Ethernet ports with one non-PCI host interface (vs KSZ8842-16MVL)
  • Cable diagnostics improve installed-network troubleshooting (vs KSZ8842-16MVL)
  • Programmable LED indication supports product-specific status reporting (vs KSZ8842-16MVL)
  • Low-power mode complements embedded network designs (vs KSZ8842-16MVL)

설계 노트

Place the KSZ8842-16MVLI so the Ethernet differential pairs connect directly to their corresponding magnetics with no unnecessary stubs or layer transitions. Route the generic 8/16-bit parallel bus away from the Ethernet pairs and magnetics where practical. Use the manufacturer reference layout and layer stack for impedance geometry, especially on a 128-LQFP footprint where parallel signals can introduce crosstalk if routed carelessly.

Design the 3.3 V supply rail to remain within the listed 3.1 V to 3.5 V operating range during startup, load transients, and temperature extremes. Place local high-frequency bypass capacitors close to the device supply pins and isolate noisy digital return currents from Ethernet magnetics. Confirm the exact pin-level decoupling network, current limits, and sequencing requirements in the manufacturer datasheet before finalizing the power tree.

Do not treat related KSZ8842, KSZ8863, or KSZ8873 devices as interchangeable merely because they share the KSZ family name. Verify port count, CPU-interface type, bus width, package, pin assignments, voltage, clocking, and Ethernet magnetics. The KSZ8842-32MVLI uses a wider bus, while the PCI-interface KSZ8842-PMQL and KSZ8842-PMBL use different packages and interfaces.

Validate the parallel CPU-bus timing in the assembled board, with particular attention to clock jitter, propagation delay, loading, and crosstalk from adjacent signals. Use the manufacturer's recommended host-bus topology and avoid adding long diagnostic or expansion branches to the bus. MII support does not remove the need for controlled impedance and disciplined clock routing when that interface is enabled.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The manufacturer product family and comparison listings reference RoHS and REACH topics, but an explicit compliance declaration for this exact order code was not established. Confirm material and environmental declarations with Microchip Technology before final procurement approval.

관련 검색

ksz8842 16mvli KSZ8842-16MVLI datasheet KSZ8842-16MVLI pinout KSZ8842-16MVLI datasheet pdf KSZ8842-16MVLI equivalent KSZ8842-16MVLI replacement KSZ8842-16MVLI price KSZ8842-16MVLI stock Microchip KSZ8842-16MVLI ksz8842 pmql micrel ksz8842 KSZ8842-16MVLI application circuit KSZ8842-16MVLI 128-LQFP footprint

관련 부품 & 용어

Microchip Technology Micrel Semiconductor KSZ8842-16MVLI KSZ8842-16MVL KSZ8842-16MVLI-TR KSZ8842-32MVLI KSZ8842-PMQL KSZ8842-PMBL KSZ8873RLLI KSZ8873FLLI KSZ8863RLLI Ethernet Switch Ethernet Interface Controller Integrated Interface Circuit 10/100 Base-T Fast Ethernet Generic 8/16-bit Parallel Bus MII Cable Diagnostics Programmable LED Indication Low-Power Mode 128-LQFP LQFP Package Family Surface Mount IEEE 802.3 IEEE 802.3u IEEE 802.3x
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기