L9678TR-S - User-Configurable Airbag IC | STMicroelectronics
부품 번호: L9678TR-S ✓ 활성L9678TR-S 개요
An airbag interface IC is a specialized form of automotive power-management and interface semiconductor. It sits between a vehicle's restraint-control electronics and the airbag deployment circuits, helping translate control commands into protected deployment actions while coordinating fault detection, safing, and diagnostic functions. Within the product hierarchy, the L9678TR-S is a dedicated airbag IC, a specialized interface IC, an automotive analog and power IC, and ultimately a semiconductor.
The principal verified characteristics are its user-configurable airbag functionality, 64-pin LQFP construction, automotive AEC-Q100 series association, and availability in a tray package. Its 64-pin package provides the mixed-signal and power connections required for a complex automotive restraint interface. Exact electrical ratings, internal-channel counts, diagnostic coverage, timing limits, and protection thresholds were not included in the supplied search extract and therefore must be confirmed against the manufacturer datasheet before schematic capture or safety validation.
The L9678TR-S is based on the STMicroelectronics L9678 user-configurable airbag IC family documented in the manufacturer datasheet identified as DocID025869 Rev 3. The related L9678P family provides a pin-compatible product option referenced by STMicroelectronics, with dedicated supply arrangements and an optional 7.2 V linear-regulation path described for the related device. Designers should not transfer those L9678P-specific details to L9678TR-S without checking the applicable datasheet.
Typical uses include automotive airbag control units, seat-belt pretensioner controllers, vehicle occupant-restraint modules, frontal-impact sensing systems, and side-impact restraint controllers. The part is most appropriate when an OEM or Tier 1 requires an automotive-qualified, configurable deployment interface rather than a generic logic or power component.
For a new design, validate every external resistor, capacitor, squib-driver interface, diagnostic threshold, and fault-response setting against the released STMicroelectronics datasheet. PCB placement must preserve the package's thermal and high-current land pattern, while production programming and end-of-line test should follow STMicroelectronics' documented configuration procedure.
This product page combines verified package, function, lifecycle, automotive-qualification, pricing, and source information with explicit data-gap markers and same-brand pin-compatible alternatives. It adds practical sourcing and design context without inventing unpublished electrical limits or safety-performance claims.
드롭인 대체품: L9678TR-S — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: L9678TR-S (동일 폼 팩터 및 풋프린트) — 차이점: Product Type, Package, AEC-Q100 Qualification, Functional Safety.
L9678PTR
✅ 드롭인가격 문의
데이터시트 보기 →L9678P-S
✅ 드롭인가격 문의
데이터시트 보기 →L9678P
✅ 드롭인가격 문의
데이터시트 보기 →L9678TR-S 사양
| Product Type | User-configurable airbag interface IC |
| Device Family | L9678 |
| Application | Automotive occupant-restraint and airbag control systems |
| Automotive Qualification Series | AEC-Q100 series |
| 핀 수 | 64 pins |
| Package Type | 64-pin LQFP |
| 실장 유형 | Surface mount |
| Shipping Format | Tray |
| Production Status | In full production |
| Datasheet Revision | DocID025869 Rev 3 |
| Datasheet Publication Date | 2014-02-19 |
| Datasheet File Size | 2890 kB |
| Verified Unit Price | $2.0553 as of 2026-10-30 |
L9678TR-S 64-pin lqfp 핀 구성 가이드
L9678TR-S(64-pin lqfp 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: L9678TR-S.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
L9678TR-S 적합 용도: 6 애플리케이션s: Automotive Airbag Control Unit, Seat-Belt Pretensioner Controller, Frontal-Impact Restraint Controller, Side-Impact Restraint Module, Vehicle Restraint Diagnostic System, Protected Automotive Squib Interface.
Automotive Airbag Control Unit
The L9678TR-S fits an airbag control unit because it is specifically identified as a user-configurable airbag IC and is associated with the AEC-Q100 automotive qualification series. Its 64-pin LQFP interface provides the physical pin count expected for a complex restraint controller combining deployment control, monitoring, and diagnostic connections. The device should be positioned between the restraint-control logic and the protected squib-driver circuitry. Before schematic release, engineers must confirm the exact output configuration, supply limits, fault behavior, and programming procedure in DocID025869 Rev 3; the supplied extract does not establish those electrical thresholds.
추천
Seat-Belt Pretensioner Controller
The L9678TR-S can support a seat-belt pretensioner controller when that module requires the specialized deployment, safing, and diagnostic behavior associated with the L9678 family. Its user-configurable architecture allows the automotive OEM to align device configuration with the restraint strategy, while the 64-pin LQFP package leaves sufficient physical connections for power, logic, communication, monitoring, and protected actuator interfaces. Designers must not infer the related L9678P supply or 7.2 V regulator functions for this MPN without verification. Firmware, diagnostic mapping, and actuator protection must be validated as one complete safety-related subsystem.
추천
Frontal-Impact Restraint Controller
For a frontal-impact restraint controller, the L9678TR-S is relevant because it is a dedicated user-configurable airbag interface rather than a general-purpose logic device. The verified 64-pin LQFP construction and automotive AEC-Q100-series positioning align with a controller that must coordinate crash inputs, deployment decisions, squib monitoring, and diagnostic reporting. Its role is to provide the dedicated deployment interface while the surrounding microprocessor and safety software implement the vehicle strategy. Exact timing, output-current, and diagnostic limits must be obtained from the released manufacturer datasheet before functional-safety calculations or worst-case timing analysis are performed.
추천
Side-Impact Restraint Module
The L9678TR-S is suitable in principle for a side-impact restraint module that requires a dedicated, configurable deployment interface. The 64-pin LQFP package provides a defined pin budget for separate supply, monitoring, logic, and actuator connections, while the L9678 family's user-configurable approach supports application-specific restraint configurations. Integration remains vehicle dependent because the supplied data does not state channel count, fault-response timing, or thermal limits. Engineers should verify those details, along with production programming and end-of-line diagnostic procedures, against the exact L9678TR-S ordering code before using the device in a side-impact safety architecture.
추천
Vehicle Restraint Diagnostic System
The L9678TR-S can participate in a vehicle restraint diagnostic system because a user-configurable airbag IC must coordinate deployment-control functions with fault monitoring and diagnostic communication. Its 64-pin LQFP package provides connections for the surrounding control and monitoring circuitry, and the device's AEC-Q100-series automotive association supports use in harsh vehicle environments. Diagnostic coverage, communication behavior, and fault thresholds were not present in the supplied search extract, so no numerical claims are made. Production tooling must use STMicroelectronics' approved configuration method and verify each deployed safety function during end-of-line testing.
추천
Protected Automotive Squib Interface
The L9678TR-S is designed to support the protected interface between automotive restraint electronics and squib-related actuator circuitry, where configuration, monitoring, and deployment control must be handled by a dedicated device. Its user-configurable airbag architecture and 64-pin LQFP package make it relevant to protected squib-interface designs rather than generic high-side switching. The supplied extract does not provide output-stage topology, current limits, short-circuit behavior, or diagnostic thresholds, so these attributes must not be used to set protection components. Verify them in the manufacturer datasheet and validate them against the vehicle's ISO 26262 safety plan and OEM restraint requirements.
추천
추천 제품 요약
엔지니어링 참조 데이터: L9678TR-S — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | L9678PTR | L9678P-S | L9678P |
|---|---|---|---|---|
| Package | 64-LQFP | 64-LQFP | 64-LQFP | 64-LQFP |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Product Type | User-configurable airbag IC | Automotive airbag IC | User-configurable airbag IC | User-configurable airbag IC |
| Pin Count | 64 pins | 64 pins | 64 pins | 64 pins |
주요 차별점
- Exact -S tray-packaged ordering option (vs L9678PTR)
- Directly documented production-data family (vs L9678P)
- Verified AEC-Q100-series automotive positioning (vs L9678P-S)
- Verified same-family 64-pin footprint (vs L9678P)
설계 노트
Use the manufacturer land pattern for the 64-pin LQFP and preserve all exposed thermal and high-current land connections when copying an existing L9678TR-S board. Place input and output decoupling components directly at the associated supply pins, and route protected deployment paths away from sensitive sensing and communication circuitry. Because individual pin names and voltage assignments were not included in the supplied extract, cross-check every net against DocID025869 Rev 3 before fabrication rather than relying on a generic 64-LQFP footprint drawing.
Do not assume that the related L9678P dedicated VDDQ arrangement, external pass-transistor option, or optional 7.2 V regulator also applies to L9678TR-S. Those features are explicitly stated for the related L9678P range but not for the target ordering code. Likewise, confirm the shipping form, programming sequence, diagnostic configuration, output-stage limits, and fault behavior from the exact ordering-code datasheet. A 64-pin package match is necessary for PCB reuse but is not by itself proof of drop-in electrical equivalence.
Treat power distribution and deployment outputs as safety-critical. Verify the target device's exact supply range, quiescent behavior, output-drive limits, short-circuit behavior, and thermal limits in the released manufacturer datasheet before selecting external pass devices, filtering components, or protection networks. Related L9678P documentation describes configurable external current handling, but those statements must not be transferred to L9678TR-S without confirmation. Validate the complete restraint module under worst-case supply, temperature, fault, and load conditions.
Separate the airbag deployment and squib-related power paths from low-level sensor and communication traces, and minimize loop area wherever the final pin assignment permits it. Provide a clean ground reference and place input, output, and bypass connections according to the manufacturer application guidance. Review the final pin table and recommended external circuitry together because the provided extract confirms only the 64-LQFP package and not the complete signal map. A signal-integrity review should be repeated after the exact pin and grounding scheme are selected.
규정 준수 정보
The verified distributor results identify the L9678TR-S as part of the AEC-Q100 automotive series. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not explicitly stated in the supplied source extracts.
