STMicroelectronics

LM2904WHD - Low-Power Dual Op Amp | STMicroelectronics

부품 번호: LM2904WHD ✓ 활성
Single positive supply Vdss 8-pin SOIC Package Internally frequency-compensated Speed
MOQ: 1 |

LM2904WHD 개요

STMicroelectronics LM2904WHD is a low-power dual operational amplifier with two independent, internally frequency-compensated amplifier circuits in an 8-pin SOIC package. The device is intended for general-purpose signal conditioning and control applications where two amplifier channels, low supply consumption, and operation from a single positive supply are important. The manufacturer datasheet identifies the LM2904 family as suitable for automotive and industrial control systems.

An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages. In voltage-following operation, the circuit presents high input impedance and low output impedance, making it useful for buffers, sensor interfaces, and active filtering. The LM2904 belongs to the broader operational-amplifier hierarchy, which includes general-purpose amplifiers, precision amplifiers, instrumentation amplifiers, and comparators.

The LM2904WHD provides two amplifier channels in one package, reducing component count and board area compared with two separate single amplifiers. Its internally frequency-compensated design simplifies closed-loop use in non-inverting, inverting, summing, and feedback configurations. The device is specified as a low-power dual operational amplifier and operates from a single positive power supply, allowing it to interface with low-voltage sensors and control circuitry without a negative supply rail.

The 8-SOIC package provides a standard surface-mount footprint suitable for conventional PCB assembly. Because both amplifiers share the same IC, careful layout should keep sensitive input and feedback paths short, maintain stable ground references, and separate the device from high-current switching stages where practical. Stable operation also depends on following the manufacturer recommendations for bypass capacitance, load conditions, output swing, and input common-mode range.

Typical uses include industrial sensor conditioning, automotive control modules, battery-powered instrumentation, current-loop interfaces, active filters, and general signal amplification. The dual-channel configuration is particularly useful when a board needs one channel for amplification and the other for buffering, offset correction, or active filtering. The low-power nature of the family also makes it suitable for systems where continuous amplifier quiescent current affects thermal design or battery life.

For PCB implementation, place the supply bypass capacitor close to the power pin and connect the decoupling return directly to the appropriate ground plane. Check the datasheet limits for input common-mode voltage, output current, supply voltage, and input offset before fixing the operating point. Avoid relying on output saturation as a substitute for proper supply design, and verify the closed-loop gain-bandwidth and stability margin for the intended feedback network.

This product page combines the LM2904WHD device description, verified manufacturer and distributor references, package-level design guidance, application analysis, and clearly qualified replacement information. It is intended to accelerate component identification while preserving the need to validate electrical compatibility in the final system.

드롭인 대체품: LM2904WHD — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: LM2904WHD (동일 폼 팩터 및 풋프린트) — 차이점: Amplifier Type, Number of Channels, Operating Temperature Range, Package.

Texas Instruments
Number of Channels: 2 (Dual)
Operating Temperature Range: -40 C to +125 C
Package: SOIC-8 (D)
비교 대상: LM2904WHD →
Texas Instruments
Amplifier Type: Dual general-purpose operational amplifier
비교 대상: LM2904WHD →
Texas Instruments
Amplifier Type: Dual general-purpose operational amplifier
Operating Temperature Range: -40 °C to +125 °C
비교 대상: LM2904WHD →

LM2904BA

✅ 드롭인 ⚠️ 사양 미검증
📦 SOIC-8
Channel count remains 2 and package remains 8-SOIC, representing 0% architectural and footprint difference; family-specific electrical limits require comparison.

📋 참조 대체품 (카탈로그에 없음)

LM2904BIDR

✅ 드롭인 ⚠️ 사양 미검증
Texas Instruments
📦 SOIC-8
Texas Instruments · Industry-standard dual operational amplifier · 2 (Dual) · 3 V to 36 V · +/-1.5 V to +/-18 V · 1.2 MHz · 0.5 V/us (typical) · 0.5 mV typical / 3 mV maximum

가격 문의

데이터시트 보기 →

LM2904QD

✅ 드롭인 ⚠️ 사양 미검증
Texas Instruments
📦 SOIC-8
Dual general-purpose operational amplifier · 2 channels · 26 V · 700 kHz · Automotive · SOP · 8 terminals · Gull wing

가격 문의

데이터시트 보기 →

LM2904QDR

✅ 드롭인 ⚠️ 사양 미검증
Texas Instruments
📦 SOIC-8
Dual general-purpose operational amplifier · 2 circuits · 26 V · 700 kHz · -40 °C to +125 °C · 8-pin SOIC (D) · 8 pins · 4 differential inputs for 2 amplifier channels

가격 문의

데이터시트 보기 →

LM2904WHD 최대 정격 & 전기적 특성

Amplifier Type General-purpose operational amplifier
Number of Channels 2 channels
Number of Independent Amplifiers 2 independent amplifiers
출력 유형 Single-ended
Frequency Compensation Internally frequency-compensated
Supply Configuration Single positive supply
Power Class Low power
패키지 8-pin SOIC
실장 유형 Surface mount
Datasheet Document Length 11 pages

LM2904WHD 8-pin soic 핀 구성 가이드

LM2904WHD(8-pin soic 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

LM2904WHD의 8-pin soic 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: LM2904WHD.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

LM2904WHD 적합 용도: 6 애플리케이션s: Industrial Sensor Signal Conditioning, Automotive Control Module Signal Conditioning, Battery-Powered Instrumentation, Active Filter and Signal Conditioning, Current Loop Interface, General-Purpose Analog Buffering.

🏭

Industrial Sensor Signal Conditioning

The LM2904WHD fits industrial sensor interfaces because it combines two independent, internally frequency-compensated amplifiers with low-power operation from a single positive supply. One channel can amplify the sensor output while the second buffers the result or drives an active filter. The 8-SOIC package reduces board area compared with two separate single amplifiers. Designers should confirm that the sensor output remains within the input common-mode range and that the required gain fits the amplifier's bandwidth and stability characteristics.

🚗

Automotive Control Module Signal Conditioning

LM2904WHD can support automotive and industrial control modules because the STMicroelectronics family is designed for those application categories and combines two amplifier channels in one 8-SOIC package. A channel pair can condition a sensor input and monitor an actuator-related voltage, reducing component count. The exact grade's temperature range, AEC-Q100 status, supply limits, and common-mode window must be confirmed before production release, particularly for safety- or reliability-critical functions.

🔋

Battery-Powered Instrumentation

The LM2904WHD's low-power dual-amplifier architecture is appropriate for battery-powered instrumentation where both circuit area and continuous supply demand matter. The two independent channels can provide measurement amplification and output buffering within a compact 8-SOIC footprint. Because battery systems often have narrow voltage ranges, the supply, input common-mode, and output-swing requirements must be checked across the full battery discharge profile. High source impedance can also make input bias current relevant to measurement accuracy.

📡

Active Filter and Signal Conditioning

The LM2904WHD is suitable for active filtering because its two internally frequency-compensated channels can implement related amplifier and buffering stages in one package. A common design uses one channel with resistive and capacitive feedback to establish the filter response while the other provides low-impedance drive or gain compensation. Layout quality is important: keep feedback components and input nodes compact, use a stable ground reference, and verify phase margin for the selected topology and load.

⚙️

Current Loop Interface

LM2904WHD can be used in current-loop interface and feedback circuits where a second amplifier stage helps drive or buffer an analog signal. Its internally frequency-compensated configuration supports conventional closed-loop operation from a single positive supply. The output must remain inside the specified voltage swing, and the external compensation or feedback network must preserve stability at the target gain. For 4–20 mA process-control loops, confirm the loop direction, input range, and output compliance before implementation.

🔧

General-Purpose Analog Buffering

LM2904WHD is useful for general-purpose buffering when a design needs more than one buffered analog output. Each channel can follow a reference or conditioned sensor node, while the dual configuration avoids adding a second single-amplifier package. Input offset and bias current can affect buffer accuracy, particularly with high-impedance sources, so those characteristics should be checked against the source impedance. Output loading and capacitive drive should also remain within the device's operating conditions.

What is the LM2904WHD?
The LM2904WHD is a low-power dual operational amplifier from STMicroelectronics, packaged in an 8-pin SOIC. According to the STMicroelectronics LM2904 datasheet, the circuit contains two independent, internally frequency-compensated, general-purpose amplifiers designed for automotive and industrial control systems. The dual-channel arrangement allows one IC to provide two separate amplification functions while operating from a single positive supply.
How many amplifier channels does LM2904WHD have?
The LM2904WHD contains two independent amplifier channels in one 8-pin SOIC package. The manufacturer describes the device as a low-power dual operational amplifier with internally frequency-compensated stages. This makes it useful for paired functions such as sensor conditioning plus buffering, active filtering, or error amplification. The two channels should still be evaluated independently for common-mode range, output swing, noise, and stability under their respective operating conditions.
Where can I download the LM2904WHD datasheet PDF?
The LM2904WHD datasheet PDF can be accessed through the document link on this page, while the STMicroelectronics product information is also indexed through the Octopart datasheet listing. The manufacturer document is 11 pages and describes the LM2904 family as a low-power dual operational amplifier for automotive and industrial control systems. Use the manufacturer pin configuration, electrical limits, and application guidance when defining the PCB footprint and operating conditions.
Where is the LM2904WHD pinout?
The LM2904WHD uses an 8-pin SOIC footprint, and its complete pin map should be taken from the pin-description table in the STMicroelectronics LM2904 datasheet. The package contains two independent operational amplifiers, power connections, and ground references. Assign PCB tracks from that table rather than inferring connections from another dual-amplifier package, because otherwise identical amplifier functions can still have different power and output assignments.
Can LM2904WHD operate from a single supply?
Yes, the LM2904WHD is designed to operate from a single positive supply. This simplifies circuits that do not have a negative voltage rail and supports low-voltage sensor and control systems. The usable input and output range is not necessarily equal to the full supply voltage, so the application must remain within the datasheet input common-mode and output-swing limits. Reference designators and biasing should preserve headroom at the selected supply voltage and load.
Is LM2904WHD suitable for automotive and industrial control systems?
Yes, the STMicroelectronics LM2904 datasheet identifies the family for automotive and industrial control systems. The device combines two independent, internally frequency-compensated amplifiers in a standard 8-pin SOIC package. For an automotive-grade design, verify the exact orderable grade, temperature range, qualification status, and production requirements in the manufacturer documentation before releasing the BOM.
What applications use a dual LM2904WHD operational amplifier?
The LM2904WHD can perform two independent analog functions in sensor interfaces, industrial controls, active filters, buffers, and general-purpose signal-conditioning circuits. A typical assignment uses one channel to amplify a sensor signal and the other to buffer a reference or shape a feedback network. Because each channel has its own input, output, and compensation behavior, the complete circuit should be checked for gain, bandwidth, output swing, and stability at the intended operating point.
What is the difference between LM2904WHD and LM2904WHDT?
LM2904WHD and LM2904WHDT refer to the same 8-SOIC dual operational-amplifier family, but the final ordering suffix can identify different production packing or shipment formats. The distributor record describes LM2904WHDT as a standard general-purpose, two-circuit, single-ended amplifier in an 8-SOIC package. Because package ordering codes are not functionally interchangeable for assembly planning, confirm the manufacturer ordering table before substituting one suffix for another.
What is the best drop-in replacement for LM2904WHD?
LM2904BA and LM2904B are the closest same-brand family candidates because they retain the two-channel operational-amplifier architecture and an 8-pin SOIC footprint. LM2904QD or LM2904QDR may suit designs requiring the automotive-qualified family branch. A replacement remains valid only after confirming package pinout, supply range, common-mode limits, output swing, offset, bandwidth, temperature grade, and qualification status against the original design.
Can LM2904B replace LM2904WHD without PCB changes?
LM2904B can be considered as a same-brand, same-family replacement because it retains the dual-amplifier architecture and is available in an 8-pin SOIC configuration. The change is not automatically safe without an engineering review. Compare the manufacturer pin table, electrical characteristics, supply range, common-mode limits, output swing, stability, and temperature grade before treating LM2904B as a drop-in replacement.
When should I choose LM2904B over LM2904WHD?
Choose LM2904B when its manufacturer-specified electrical characteristics provide a clear benefit for the target circuit while preserving the 8-SOIC footprint and dual-channel architecture. Retain LM2904WHD when the design is already validated around its specific offset, bandwidth, input bias, common-mode, and temperature characteristics. The final choice should be based on worst-case circuit requirements rather than the family name or nominal gain-bandwidth alone.
Is LM2904WHD suitable for low-voltage sensor interfaces?
LM2904WHD can suit low-voltage sensor interfaces because it operates from a single positive supply and contains two low-power amplifiers. The sensor output must remain inside the amplifier's input common-mode range, and the required output voltage must stay within its output-swing limits. Confirm those limits, input bias current, offset, noise, and supply-current requirements against the sensor impedance and system accuracy before finalizing the design.
How should I design the PCB around LM2904WHD?
Place the supply bypass capacitor close to the LM2904WHD power pin and return its ground connection directly to the ground plane. Keep each inverting-input and feedback track short to reduce parasitic coupling and maintain loop stability. Use the manufacturer's pin-description table for all eight connections, and keep analog inputs away from switching nodes, power inductors, and high-current return paths where board constraints permit.
What are the key specifications engineers should know about LM2904WHD?
The principal confirmed specifications are two independent amplifier channels, internal frequency compensation, single-ended outputs, a low-power design, and an 8-pin SOIC package. The STMicroelectronics datasheet is 11 pages and describes the family for automotive and industrial control systems. Detailed offset, bias current, bandwidth, slew rate, supply range, common-mode range, and temperature limits must be taken from the corresponding electrical tables for the selected grade.
Where can I buy LM2904WHD and check its lead time?
Use the Request a Quote form on this page to request LM2904WHD pricing, stock confirmation, minimum order quantity, and current lead time. Quote requests should include the target quantity, delivery date, packaging requirement, and whether an automotive-grade or other specific qualification is needed. Current commercial terms can change by order volume and supply status, so confirm them directly before committing the manufacturing schedule.
Are there any ratings restrictions for LM2904WHD?
The LM2904WHD must be operated within the manufacturer-specified supply voltage, input common-mode range, output swing, input and output current, and temperature limits. Those numerical limits are defined by the LM2904 datasheet for the selected orderable device. Also confirm RoHS, REACH, halogen-free, conflict-minerals, and AEC-Q100 status from the exact product documentation rather than extending the status of one package or grade to another.

엔지니어링 참조 데이터: LM2904WHD — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose LM2904WHD when the design requires two independent, low-power general-purpose amplifier channels, single-positive-supply operation, and an 8-pin SOIC footprint. It is well suited to industrial sensing, control modules, active filtering, buffering, and instrumentation where the circuit must tolerate a restricted common-mode range. LM2904BA or LM2904B may be preferable when their manufacturer-defined electrical improvements provide a clear advantage, but the original device should be retained when it already meets the verified design limits. LM2904QD or LM2904QDR can be evaluated for automotive-grade requirements after confirming qualification and temperature specifications. For any substitution, compare the complete pinout, supply range, input common-mode limits, output swing, offset, bias current, bandwidth, slew rate, noise, load capability, and environmental grade rather than relying only on the dual-amplifier description.

대체품과의 비교

파라미터 이 제품 LM2904BA LM2904B LM2904QD LM2904QDR
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand STMicroelectronics Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Amplifier Channels 2 channels 2 channels 2 channels 2 channels 2 channels
Internal Frequency Compensation Yes Yes Yes Yes Yes

주요 차별점

  • Two independent amplifiers in one standard package (vs LM324ANSR)
  • Single positive-supply operation (vs LM2902MTX)
  • Compact 8-pin SOIC implementation (vs LM2902VDG)

설계 노트

Place the supply bypass capacitor adjacent to the LM2904WHD power and ground pins, with a short, low-impedance return to the ground plane. Keep each amplifier's inverting-input and feedback components close to the relevant pins to minimize parasitic feedback and oscillation risk. Route sensitive sensor inputs away from switching nodes, inductors, and high-current return paths. Assign the remaining five connections from the manufacturer pin-description table rather than from a generic dual-op-amp footprint.

Use the LM2904WHD's two independent channels as separate analog paths and avoid sharing sensitive return currents with output or digital switching currents. For high-impedance sources, verify input bias-current effects and consider a nearby bias-return resistor where appropriate. Check the selected frequency-compensated topology for stable closed-loop gain, especially with cable capacitance, large loads, or high closed-loop gain, and use the manufacturer stability guidance when adding isolation resistance.

Do not assume that a single-positive-supply amplifier can process an input or generate an output across the complete supply range. Confirm the input common-mode window and output-swing limits for the actual supply voltage and load. In battery-powered circuits, evaluate the full battery range rather than only its nominal voltage. Also verify that the selected ordering suffix maintains the required package, temperature grade, qualification, and production-packing format before approving a substitute.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The family is described for automotive and industrial control applications, but exact compliance and qualification claims must be confirmed for the selected orderable grade. No component-level certification status was confirmed in the cited records.

데이터 검증일: 2026-11-17 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

LM2904WHD datasheet LM2904WHD pinout LM2904WHD datasheet pdf STMicroelectronics LM2904WHD LM2904WHD SOIC-8 amplifier LM2904WHD equivalent LM2904WHD replacement LM2904WHD cross reference LM2904WHD vs LM2904B LM2904WHD automotive control LM2904WHD single supply LM2904WHD price

관련 부품 & 용어

STMicroelectronics LM2904WHD LM2904BA LM2904B LM2904QD LM2904QDR Texas Instruments operational amplifier dual operational amplifier general-purpose amplifier analog integrated circuit single-ended output internal frequency compensation single positive supply low-power amplifier SOIC-8 surface mount industrial control systems automotive control systems sensor signal conditioning active filter input common-mode range output swing gain-bandwidth product input bias current
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기