LM2904WHD - Low-Power Dual Op Amp | STMicroelectronics
MPN: LM2904WHD ✓ فعالLM2904WHD نمای کلی
An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages. In voltage-following operation, the circuit presents high input impedance and low output impedance, making it useful for buffers, sensor interfaces, and active filtering. The LM2904 belongs to the broader operational-amplifier hierarchy, which includes general-purpose amplifiers, precision amplifiers, instrumentation amplifiers, and comparators.
The LM2904WHD provides two amplifier channels in one package, reducing component count and board area compared with two separate single amplifiers. Its internally frequency-compensated design simplifies closed-loop use in non-inverting, inverting, summing, and feedback configurations. The device is specified as a low-power dual operational amplifier and operates from a single positive power supply, allowing it to interface with low-voltage sensors and control circuitry without a negative supply rail.
The 8-SOIC package provides a standard surface-mount footprint suitable for conventional PCB assembly. Because both amplifiers share the same IC, careful layout should keep sensitive input and feedback paths short, maintain stable ground references, and separate the device from high-current switching stages where practical. Stable operation also depends on following the manufacturer recommendations for bypass capacitance, load conditions, output swing, and input common-mode range.
Typical uses include industrial sensor conditioning, automotive control modules, battery-powered instrumentation, current-loop interfaces, active filters, and general signal amplification. The dual-channel configuration is particularly useful when a board needs one channel for amplification and the other for buffering, offset correction, or active filtering. The low-power nature of the family also makes it suitable for systems where continuous amplifier quiescent current affects thermal design or battery life.
For PCB implementation, place the supply bypass capacitor close to the power pin and connect the decoupling return directly to the appropriate ground plane. Check the datasheet limits for input common-mode voltage, output current, supply voltage, and input offset before fixing the operating point. Avoid relying on output saturation as a substitute for proper supply design, and verify the closed-loop gain-bandwidth and stability margin for the intended feedback network.
This product page combines the LM2904WHD device description, verified manufacturer and distributor references, package-level design guidance, application analysis, and clearly qualified replacement information. It is intended to accelerate component identification while preserving the need to validate electrical compatibility in the final system.
جایگزینهای drop-in برای LM2904WHD — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای LM2904WHD (همان فرمفاکتور و فوتپرینت) — متفاوت در Amplifier Type, Number of Channels, Operating Temperature Range, Package.
LM2904BA
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
LM2904BIDR
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←LM2904QD
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←LM2904QDR
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←LM2904WHD حداکثر مقادیر مجاز و مشخصات الکتریکی
| Amplifier Type | General-purpose operational amplifier |
| Number of Channels | 2 channels |
| Number of Independent Amplifiers | 2 independent amplifiers |
| نوع خروجی | Single-ended |
| Frequency Compensation | Internally frequency-compensated |
| Supply Configuration | Single positive supply |
| Power Class | Low power |
| بستهبندی | 8-pin SOIC |
| نوع نصب | Surface mount |
| Datasheet Document Length | 11 pages |
راهنمای پیکربندی پین LM2904WHD 8-pin soic
پیکربندی پین برای LM2904WHD (پکیج 8-pin soic). این قطعه آنالوگ دارای پینهای ورودی، خروجی و تغذیه است. برای پیکربندیهای پین offset null، جبرانسازی و فعالسازی به دیتاشیت سازنده مراجعه کنید. ایدهآل برای مدارهای شرطیسازی سیگنال و تقویتکننده.
داده پینآوت تفصیلی موجود نیست برای LM2904WHD.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
LM2904WHD مناسب است برای 6 کاربردs: Industrial Sensor Signal Conditioning, Automotive Control Module Signal Conditioning, Battery-Powered Instrumentation, Active Filter and Signal Conditioning, Current Loop Interface, General-Purpose Analog Buffering.
Industrial Sensor Signal Conditioning
The LM2904WHD fits industrial sensor interfaces because it combines two independent, internally frequency-compensated amplifiers with low-power operation from a single positive supply. One channel can amplify the sensor output while the second buffers the result or drives an active filter. The 8-SOIC package reduces board area compared with two separate single amplifiers. Designers should confirm that the sensor output remains within the input common-mode range and that the required gain fits the amplifier's bandwidth and stability characteristics.
پیشنهادی
Automotive Control Module Signal Conditioning
LM2904WHD can support automotive and industrial control modules because the STMicroelectronics family is designed for those application categories and combines two amplifier channels in one 8-SOIC package. A channel pair can condition a sensor input and monitor an actuator-related voltage, reducing component count. The exact grade's temperature range, AEC-Q100 status, supply limits, and common-mode window must be confirmed before production release, particularly for safety- or reliability-critical functions.
پیشنهادی
Battery-Powered Instrumentation
The LM2904WHD's low-power dual-amplifier architecture is appropriate for battery-powered instrumentation where both circuit area and continuous supply demand matter. The two independent channels can provide measurement amplification and output buffering within a compact 8-SOIC footprint. Because battery systems often have narrow voltage ranges, the supply, input common-mode, and output-swing requirements must be checked across the full battery discharge profile. High source impedance can also make input bias current relevant to measurement accuracy.
پیشنهادی
Active Filter and Signal Conditioning
The LM2904WHD is suitable for active filtering because its two internally frequency-compensated channels can implement related amplifier and buffering stages in one package. A common design uses one channel with resistive and capacitive feedback to establish the filter response while the other provides low-impedance drive or gain compensation. Layout quality is important: keep feedback components and input nodes compact, use a stable ground reference, and verify phase margin for the selected topology and load.
پیشنهادی
Current Loop Interface
LM2904WHD can be used in current-loop interface and feedback circuits where a second amplifier stage helps drive or buffer an analog signal. Its internally frequency-compensated configuration supports conventional closed-loop operation from a single positive supply. The output must remain inside the specified voltage swing, and the external compensation or feedback network must preserve stability at the target gain. For 4–20 mA process-control loops, confirm the loop direction, input range, and output compliance before implementation.
پیشنهادی
General-Purpose Analog Buffering
LM2904WHD is useful for general-purpose buffering when a design needs more than one buffered analog output. Each channel can follow a reference or conditioned sensor node, while the dual configuration avoids adding a second single-amplifier package. Input offset and bias current can affect buffer accuracy, particularly with high-impedance sources, so those characteristics should be checked against the source impedance. Output loading and capacitive drive should also remain within the device's operating conditions.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای LM2904WHD — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | LM2904BA | LM2904B | LM2904QD | LM2904QDR |
|---|---|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | STMicroelectronics | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Amplifier Channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Internal Frequency Compensation | Yes | Yes | Yes | Yes | Yes |
تفاوتهای کلیدی
- Two independent amplifiers in one standard package (در مقابلLM324ANSR)
- Single positive-supply operation (در مقابلLM2902MTX)
- Compact 8-pin SOIC implementation (در مقابلLM2902VDG)
یادداشتهای طراحی
Place the supply bypass capacitor adjacent to the LM2904WHD power and ground pins, with a short, low-impedance return to the ground plane. Keep each amplifier's inverting-input and feedback components close to the relevant pins to minimize parasitic feedback and oscillation risk. Route sensitive sensor inputs away from switching nodes, inductors, and high-current return paths. Assign the remaining five connections from the manufacturer pin-description table rather than from a generic dual-op-amp footprint.
Use the LM2904WHD's two independent channels as separate analog paths and avoid sharing sensitive return currents with output or digital switching currents. For high-impedance sources, verify input bias-current effects and consider a nearby bias-return resistor where appropriate. Check the selected frequency-compensated topology for stable closed-loop gain, especially with cable capacitance, large loads, or high closed-loop gain, and use the manufacturer stability guidance when adding isolation resistance.
Do not assume that a single-positive-supply amplifier can process an input or generate an output across the complete supply range. Confirm the input common-mode window and output-swing limits for the actual supply voltage and load. In battery-powered circuits, evaluate the full battery range rather than only its nominal voltage. Also verify that the selected ordering suffix maintains the required package, temperature grade, qualification, and production-packing format before approving a substitute.
اطلاعات انطباق
The family is described for automotive and industrial control applications, but exact compliance and qualification claims must be confirmed for the selected orderable grade. No component-level certification status was confirmed in the cited records.