Texas Instruments

LM358N/NOPB - Dual 32V 1MHz Op Amp | Texas Instruments

부품 번호: LM358N/NOPB ✓ 활성
32 V Vdss 8-pin PDIP Package
MOQ: 1 |

LM358N/NOPB 개요

The Texas Instruments LM358N/NOPB is a dual, general-purpose operational amplifier rated for a 32 V maximum supply and 1 MHz gain-bandwidth, housed in an 8-pin PDIP package. The device contains two independent, high-gain, internally frequency-compensated amplifiers that can operate from a single power supply, making it suitable for cost-sensitive analog signal-conditioning designs that require basic voltage feedback rather than rail-to-rail input or output performance.

An operational amplifier, commonly called an op amp, is an analog integrated circuit that amplifies the voltage difference between its two inputs. The LM358 family belongs to the broader amplifier IC hierarchy: operational amplifier → voltage-feedback amplifier → analog amplifier IC → semiconductor. Its two channels can amplify independent signals, making one package more economical than using two single-amplifier packages when PCB area, component count, or assembly cost matters.

Key features include two amplifiers in one package, a 32 V maximum supply rating, a 1 MHz gain-bandwidth product, and internal frequency compensation. Internal compensation removes the need for an external compensation network in the standard closed-loop configurations. The device is also designed for single-supply operation, which allows its input and output signals to be referenced to ground in many 5 V, 12 V, or 24 V systems. The PDIP-8 package supports through-hole assembly and hand rework.

The LM358N/NOPB belongs to TI's LMx58-N low-power dual operational amplifier family. Its architecture trades precision and speed for broad supply-voltage compatibility, low power consumption, and straightforward implementation. At a 1 MHz gain-bandwidth product, it is suitable for audio, control, sensing, and buffering functions rather than high-speed signal conditioning. Its differential-input structure supports amplifier, comparator-style, feedback-control, and signal-conditioning arrangements when operated within its common-mode and output-swing limitations.

Typical uses include DC motor and actuator feedback loops, industrial sensor interfaces, temperature and light sensor conditioning, audio preamplifier stages, active filters, sample-and-hold circuits, and low-frequency control systems. Two independent channels also support complementary functions such as sensing one input while amplifying another, or implementing a dual-stage signal-conditioning chain without adding another IC package.

Design should begin with a supply that remains below the 32 V maximum and includes adequate bypass capacitance near the power pins. Check input common-mode range and output-voltage swing at the selected load before closing the feedback loop. Because this is not a rail-to-rail device, the usable input and output range is not automatically equal to the full supply rails. Confirm stability, output-current demand, and thermal conditions with the component-specific limits in the LMx58-N datasheet.

This page combines manufacturer specifications, pin mapping, sourcing guidance, application analysis, and package-matched replacement options. It also distinguishes the genuine 8-pin PDIP alternatives from functional equivalents that require a different footprint, helping engineers make a PCB-safe decision before committing a replacement to production.

드롭인 대체품: LM358N/NOPB — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: LM358N/NOPB (동일 폼 팩터 및 풋프린트) — 차이점: Supply Configuration, Package, Amplifier Count, Compensation, Input Type.

Texas Instruments
Supply Configuration: Single supply or split supply
Amplifier Count: 2 amplifiers
Compensation: Internally frequency compensated
Texas Instruments
Supply Configuration: Single supply operation
Package: 8-PDIP
Amplifier Count: 2 circuits
Texas Instruments
Supply Configuration: Single supply operation emphasized in the verified LM358 family description
Package: 8-pin mini-DIP or 8-pin PDIP, depending on manufacturer source
Input Type: Differential input

LM358AN/NOPB

✅ 드롭인
Texas Instruments
📦 PDIP-8
2 circuits · Dual general-purpose operational amplifier · 32 V · 3 V · 1 MHz · 700 kHz · 0.3 V/us · 2 mV

가격 문의

데이터시트 보기 →

RC4558N

✅ 드롭인
📦 PDIP-8
Same dual-amplifier, 8-pin PDIP topology with 0% pin-count difference; offset-voltage and bias-current deltas require comparison with the LM358N limits.

📋 참조 대체품 (카탈로그에 없음)

LM358N

✅ 드롭인
Texas Instruments
📦 PDIP-8
Dual operational amplifier · 2 independent amplifiers · 32 V · 1 MHz · Differential input · Internally frequency compensated · Single supply operation emphasized in the verified LM358 family description · 8-pin mini-DIP or 8-pin PDIP, depending on manufacturer source

가격 문의

데이터시트 보기 →

LM358N

✅ 드롭인
Texas Instruments
📦 PDIP-8
Dual operational amplifier · 2 independent amplifiers · 32 V · 1 MHz · Differential input · Internally frequency compensated · Single supply operation emphasized in the verified LM358 family description · 8-pin mini-DIP or 8-pin PDIP, depending on manufacturer source

가격 문의

데이터시트 보기 →

LM2904N

✅ 드롭인
Texas Instruments
📦 PDIP-8
2 amplifiers · 26 V · 1 MHz · Dual independent operational amplifiers · Internally frequency compensated · Single supply or split supply · Extending to ground/VEE

가격 문의

데이터시트 보기 →

MM358N

✅ 드롭인
📦 PDIP-8
Legacy LM358-family dual op amp with the same 8-pin PDIP topology and 0% pin-count difference; offset, bias-current, and temperature limits require comparison.

📋 참조 대체품 (카탈로그에 없음)

LM358N/NOPB 최대 정격 & 전기적 특성

Product Type Dual operational amplifier
Number of Amplifiers 2 channels
Maximum Supply Voltage 32 V
Gain-Bandwidth Product 1 MHz
Supply Configuration Single supply
Compensation Internal frequency compensation
패키지 8-pin PDIP
실장 유형 Through-hole

LM358N/NOPB 핀 구성

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
핀 1 OUT1 — Output of amplifier 1
핀 2 IN1− — Inverting input of amplifier 1
핀 3 IN1+ — Non-inverting input of amplifier 1
핀 4 GND — Ground connection
핀 5 IN2+ — Non-inverting input of amplifier 2
핀 6 IN2− — Inverting input of amplifier 2
핀 7 OUT2 — Output of amplifier 2
핀 8 V+ — Positive supply connection

일반적인 애플리케이션

LM358N/NOPB 적합 용도: 6 애플리케이션s: Industrial Sensor Signal Conditioning, Audio Preamplifier, Motor and Actuator Feedback, Active Filter and Signal Conditioning, Power-Supply Monitoring, Portable Measurement and IoT Interfaces.

🏭

Industrial Sensor Signal Conditioning

The LM358N/NOPB fits industrial sensor interfaces that require two independent amplifier stages on a 12 V or 24 V supply. Its 32 V maximum supply provides useful design margin, and the 1 MHz gain-bandwidth product is more than adequate for common temperature, pressure, and position sensors operating at low-to-moderate frequencies. One channel can amplify the sensor output while the other provides buffering or level conditioning. Because the device is not rail-to-rail, the engineer must verify that the sensor output and amplified result remain inside the specified common-mode and output-swing limits.

🎧

Audio Preamplifier

The two channels in the LM358N/NOPB can implement a stereo audio preamplifier or a microphone and auxiliary-signal conditioning pair. The 1 MHz gain-bandwidth product supports audio-band amplification, while the internal compensation avoids an external stability network in conventional inverting and non-inverting configurations. A 12 V or 24 V implementation also places the device within its 32 V maximum supply. Output clipping and common-mode limits should still be evaluated at the intended signal level, because the amplifier does not provide rail-to-rail input or output operation.

🤖

Motor and Actuator Feedback

The LM358N/NOPB is suitable for low-frequency motor and actuator feedback loops because its 1 MHz gain-bandwidth product and internal compensation support straightforward closed-loop amplifier configurations. A 24 V industrial control supply remains below the device's 32 V maximum. Two channels can process a command signal and a feedback signal or provide error amplification in two related loops. The design must account for output-current demand, load capacitance, output swing, and stability when driving downstream circuitry rather than treating the bandwidth specification as a complete load-capability guarantee.

🔧

Active Filter and Signal Conditioning

The LM358N/NOPB can implement first-order active filters, amplifiers, and buffers in low-frequency measurement systems. Its dual-channel architecture reduces the number of packages needed when a signal must be filtered and then buffered or inverted. The 1 MHz gain-bandwidth product is well matched to audio and low-frequency industrial signals, while a single positive supply simplifies system power. Component tolerances, noise, output loading, and the amplifier's input and output limits should be evaluated during simulation to ensure useful gain and phase margin.

⚡

Power-Supply Monitoring

The LM358N/NOPB can monitor a power rail by comparing a divided reference against a sensed voltage and driving a status or control signal. Its 32 V maximum supply suits many 12 V and 24 V industrial rails, and the two channels can monitor positive and negative conditions or provide an additional buffered reference. Because it is a single-supply, non-rail-to-rail amplifier, the sensed range must be scaled to remain within the input common-mode region, while the monitor output must maintain adequate margin from the supply rails.

🧩

Portable Measurement and IoT Interfaces

The LM358N/NOPB is useful in compact measurement and IoT interface modules that require two low-frequency analog channels without an expensive precision amplifier. It can condition two sensor outputs, amplify a bridge signal, or buffer inputs before digitization. Operation from a single supply reduces board complexity, and the 1 MHz bandwidth is normally sufficient for slow sensor dynamics. Battery-powered designs must still examine total supply current, and sensor excitation or input bias requirements must be confirmed against the device's electrical characteristics.

What is the LM358N/NOPB?
The LM358N/NOPB is a Texas Instruments dual, general-purpose operational amplifier with two independent amplifiers, a 32 V maximum supply, and a 1 MHz gain-bandwidth product. According to the manufacturer product page, it is the LM358-N family packaged in an 8-pin PDIP. The device is intended for low-cost, single-supply analog designs requiring internally compensated voltage-feedback amplifiers.
What is the operating voltage of LM358N/NOPB?
The LM358N/NOPB supports operation up to a 32 V maximum supply, according to the Texas Instruments LM358-N product page. The exact minimum operating voltage and the permitted input common-mode range must be checked in the LMx58-N datasheet for the selected grade. Because this is a single-supply operational amplifier, input and output behavior near ground must also be considered when choosing feedback values.
Where can I download the LM358N/NOPB datasheet PDF?
The LM358N/NOPB datasheet is available through Texas Instruments under the LM358-N product page, which links the LMx58-N Low-Power, Dual-Operational Amplifiers data sheet, Revision J. The manufacturer page at https://www.ti.com/product/LM358-N is the preferred starting point because it provides the current ordering information and links to the official technical documentation.
What is the LM358N/NOPB pinout?
The LM358N/NOPB uses the standard 8-pin PDIP arrangement: pin 1 is OUT1, pin 2 is IN1−, pin 3 is IN1+, pin 4 is GND, pin 5 is IN2+, pin 6 is IN2−, pin 7 is OUT2, and pin 8 is V+. This numbering matches the counter-clockwise package convention used by the 8-pin PDIP package drawing and should be checked against the manufacturer pin-description table.
LM358N datasheet pin diagram and IC pinout
The LM358N pin diagram has eight pins around the PDIP outline, with pin 1 adjacent to the package identification notch. The two amplifier channels occupy pins 1–3 and 5–7, while pin 4 is ground and pin 8 is the positive supply. Because the LM358N/NOPB uses an 8-pin PDIP, its pinout differs from 8-pin surface-mount variants that may use the same functional channel numbering.
What can replace LM358N/NOPB?
A replacement for the LM358N/NOPB must be an 8-pin PDIP dual op amp with the same pin arrangement and suitable electrical ratings. Package-matched candidates include the STMicroelectronics LM358N, onsemi LM358N, onsemi LM2904N, and Motorola MM358N, which are identified as pin-to-pin or closely compatible LM358-family devices. Verify supply range, common-mode limits, offset, bandwidth, and output-current requirements before approving a substitution.
What is the best cross-brand equivalent for LM358N/NOPB?
The STMicroelectronics LM358N is the closest cross-brand candidate identified for the LM358N/NOPB because it is also a dual general-purpose amplifier in an 8-pin PDIP package. It is classified as a pin-to-pin cross-reference candidate, but engineers should still compare the LMx58-N datasheet values for supply current, input offset, common-mode range, and output swing. No PCB footprint change is required for the package-compatible candidate.
LM358N/NOPB vs STMicroelectronics LM358N — which is better?
The Texas Instruments LM358N/NOPB and STMicroelectronics LM358N both use an 8-pin PDIP format for two general-purpose amplifiers, making the package suitable for direct PCB comparison. The Texas Instruments device is identified as a 32 V, 1 MHz dual op amp. Selection should therefore be based on device-specific offset, supply-current, common-mode, noise, and lifecycle requirements rather than package compatibility alone.
When should I choose LM358N/NOPB over LM2904N?
Choose the LM358N/NOPB when a legacy-compatible, 32 V, 1 MHz dual general-purpose op amp with an 8-pin PDIP footprint is required. Choose LM2904N when its published input and output characteristics better match the design, particularly if lower offset, improved common-mode behavior, or different bias-current requirements are important. Both are package-compatible candidates, but their detailed electrical limits must be compared.
Is LM358N/NOPB suitable for single-supply sensor interfaces?
Yes, the LM358N/NOPB is suitable for many single-supply sensor interfaces because it was designed for single-supply operation and includes two internally compensated amplifiers. Its 32 V maximum supply accommodates common industrial rails, while the 1 MHz gain-bandwidth product is adequate for low-frequency conditioning. Sensor output must remain within the specified common-mode range, and the output must stay within the achievable swing.
Where to buy LM358N/NOPB online?
The LM358N/NOPB can be requested through the Request a Quote form on this XAIPART product page. The form is the appropriate route for current availability, minimum order quantity, lead time, and package quantity confirmation. The exact orderable MPN is LM358N/NOPB, so include that full suffix when submitting the request to avoid confusion with surface-mount or revision variants.
What is the lead time for LM358N/NOPB?
The current lead time for LM358N/NOPB should be confirmed through the Request a Quote form on this page because lead time changes with inventory and order volume. State the required quantity, tube quantity, and target delivery date in the request. The LM358-N product page also provides ordering and quality information that can help confirm the active device designation and supported order codes.
Is LM358N/NOPB in stock?
Current LM358N/NOPB stock status should be obtained through the Request a Quote form on this product page, where the requested quantity can be matched against available inventory. Because stock levels are time-sensitive, an older catalog status should not be treated as a current allocation. Include the exact MPN and required packaging quantity in the request for an actionable response.
What are the key specifications of LM358N/NOPB that engineers should know?
The key LM358N/NOPB specifications are two independent amplifiers, a 32 V maximum supply, a 1 MHz gain-bandwidth product, single-supply operation, internal frequency compensation, and an 8-pin PDIP package. According to the Texas Instruments LM358-N product information, the device is a general-purpose dual op amp. Final design approval also requires checking common-mode range, output swing, offset voltage, supply current, and temperature limits from the manufacturer datasheet.
What are the common uses of LM358N?
The LM358N is commonly used for low-frequency sensor conditioning, audio preamplification, active filtering, sample-and-hold circuits, motor feedback, and industrial control loops. Its two independent channels allow one package to process two signals or form a multistage analog chain. The 32 V maximum supply is useful in 12 V and 24 V systems, while the 1 MHz gain-bandwidth product supports general-purpose rather than high-speed signal work.

엔지니어링 참조 데이터: LM358N/NOPB — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the LM358N/NOPB when an existing design requires two general-purpose, internally compensated amplifiers in an 8-pin PDIP footprint and the application operates within a 32 V maximum supply. It is particularly suitable for low-frequency industrial sensor conditioning, audio preamplification, feedback control, and simple power-supply monitoring. Choose LM358AN/NOPB when you need a closely related TI device but require a different grade or revision after checking its detailed limits. Choose RC4558N only when its offset, bias-current, and noise characteristics provide a better match to the original circuit. For cross-brand options, compare the STMicroelectronics or onsemi LM358N and onsemi LM2904N candidates carefully because package compatibility does not guarantee identical electrical behavior. Do not approve a replacement based only on the LM358 family name; verify supply range, common-mode limits, output swing, stability, load capability, temperature grade, and lifecycle requirements.

대체품과의 비교

파라미터 이 제품 LM358AN/NOPB RC4558N LM358N LM358N LM2904N
Brand Texas Instruments Texas Instruments Texas Instruments STMicroelectronics onsemi onsemi
Package PDIP-8 PDIP-8 PDIP-8 PDIP-8 PDIP-8 PDIP-8
Number of Amplifiers 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels
Mounting Type Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole

주요 차별점

  • Two general-purpose amplifiers in one 8-pin PDIP (vs LM324KAPWR)
  • Direct through-hole package compatibility (vs LM358N from STMicroelectronics)
  • Single-supply general-purpose architecture (vs LM2902NSR)
  • Lower channel count for focused dual-amplifier designs (vs LM324ANSR)

설계 노트

Keep the supply below the 32 V maximum and place a bypass capacitor close to pin 8 and the ground connection at pin 4. Because the LM358 family is not rail-to-rail, calculate the required signal range against the actual supply voltage rather than assuming the inputs and outputs can reach either rail. Confirm that every operating condition, including supply tolerance, stays within the component limits.

Use the numbered 8-pin PDIP layout for both channels: OUT1, IN1−, IN1+, GND, IN2+, IN2−, OUT2, and V+. Maintain a common ground reference between the two channels and place input-return paths away from output and supply-current paths. A replacement is PCB-safe only when it uses the same PDIP footprint and the same functional pin assignments.

Do not treat the 1 MHz gain-bandwidth figure as permission to use arbitrarily high closed-loop gain with heavy capacitive loading. Check the feedback network, expected load, output-current demand, and output-swing requirements. Also verify input bias current when the source has high impedance, since bias-current error can dominate the signal even when the amplifier's voltage gain is correct.

Keep feedback components close to the relevant input and output pins and route both amplifier channels with short, low-loop-area paths. Grounding and decoupling should be arranged to minimize shared impedance between sensitive input channels and output or supply-return currents. For higher-frequency or precision requirements, evaluate whether the 1 MHz LM358N/NOPB performance is adequate before using more complex compensation or filtering.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

No specific compliance declaration was identified in the referenced manufacturer or distributor information. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status for the exact orderable MPN before environmental qualification.

데이터 검증일: 2026-11-17 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

lm358n nopb lm358n nopb datasheet lm358n datasheet lm358n pinout lm358n datasheet pdf lm358n pin diagram lm358n ic pinout lm358n uses lm358n pdf LM358N/NOPB equivalent LM358N/NOPB replacement LM358N/NOPB price LM358N/NOPB stock Texas Instruments LM358N/NOPB

관련 부품 & 용어

Texas Instruments LM358N/NOPB LM358-N LM358AN/NOPB RC4558N STMicroelectronics onsemi Motorola LM358N LM2904N MM358N operational amplifier dual op amp voltage-feedback amplifier analog amplifier IC semiconductor single-supply operation internal frequency compensation gain-bandwidth product input common-mode range output voltage swing PDIP-8 through-hole package industrial sensor conditioning
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기