NXP Semiconductors

LPC4337JET256Y - 204MHz Dual-Core MCU | NXP | 256-LBGA

부품 번호: LPC4337JET256Y ✓ 활성
256-LBGA, 17 x 17 mm Package 204 MHz Speed 1 MB Memory
MOQ: 1 |

LPC4337JET256Y 개요

NXP Semiconductors LPC4337JET256Y is a 32-bit dual-core microcontroller based on Arm Cortex-M4 and Arm Cortex-M0 processor cores, operating up to 204 MHz and packaged in a 256-LBGA (17 x 17 mm) surface-mount package. The device includes 1 MB of flash memory and up to 136 kB of on-chip SRAM for embedded firmware, control logic, communications, and data processing.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one component. The LPC4337 belongs to the NXP LPC43xx family of Cortex-M4 microcontrollers with an energy-efficient Cortex-M0 coprocessor. This dual-core architecture allows the Cortex-M4 core to handle the main control workload while the Cortex-M0 core can execute independent or supporting tasks.

The LPC4337JET256Y combines Ethernet connectivity, two high-speed USB interfaces, LCD support, and EMC-related peripherals in one microcontroller. Its 1 MB flash supports larger embedded applications and protocol stacks, while the SRAM accommodates active data, buffers, and real-time workloads. A 16 kB EEPROM provides nonvolatile storage for parameters, calibration data, and configuration records that must survive power loss.

Advanced peripherals include the State Configurable Timer, known as SCT, the Serial General Purpose I/O interface, or SGPIO, and a quad SPI Flash Interface known as SPIFI. These resources support precise timing, flexible serial expansion, and communication with external flash devices. The dual Cortex architecture and broad peripheral set make the device suitable for connected industrial, communications, and embedded-control systems.

Typical uses include Ethernet-connected industrial controllers, USB interface equipment, human-machine interfaces, and embedded gateways. The 256-LBGA package provides a high pin count for simultaneous communication and control functions, but its fine-pitch layout requires careful PCB design, reliable assembly processes, and adequate inspection coverage. The exposed thermal and power requirements must also be evaluated during thermal design.

Designers should use the manufacturer pin-description table and package drawing when assigning every ball and power connection. Place decoupling capacitors close to the supply balls, keep sensitive interfaces away from noisy switching paths, and follow the recommended external-component values. Firmware development requires an Arm Cortex-M4-compatible toolchain, startup support for the dual-core architecture, and device-specific clock, memory, and peripheral initialization.

This product summary consolidates the core processor, memory, connectivity, and package characteristics of the LPC4337JET256Y, then connects them to practical design guidance and verified same-package options. It is intended to help engineers evaluate fit, plan layouts, and identify the information still required before release to production.

드롭인 대체품: LPC4337JET256Y — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

LPC4337JET256

✅ 드롭인
📦 256-LBGA (17 x 17 mm)
Base ordering identifier; exact orderable suffix, temperature grade, and shipment form must be confirmed against LPC4337JET256Y before substitution.

📋 참조 대체품 (카탈로그에 없음)

LPC4337FET256

✅ 드롭인
📦 256-LBGA (17 x 17 mm)
Same LPC4337 Cortex-M4/M0 architecture and 204 MHz capability; exact flash, SRAM, device identifier, and pin configuration must be confirmed for drop-in use.

📋 참조 대체품 (카탈로그에 없음)

LPC4337JET256Y 최대 정격 & 전기적 특성

Product Type 32-bit dual-core microcontroller
Main Processor Core Arm Cortex-M4
Coprocessor Core Arm Cortex-M0
Maximum Processor Frequency 204 MHz
Word Architecture 32-bit
Flash Memory 1 MB
Flash Organization 1M x 8 bits
On-Chip SRAM Up to 136 kB
EEPROM Memory 16 kB
Ethernet Interface 1 interface
High-Speed USB Interface 2 interfaces
LCD Support Supported
External Flash Interface Quad SPI Flash Interface (SPIFI)
Timer State Configurable Timer (SCT)
Serial GPIO Interface Serial General Purpose I/O (SGPIO)
패키지 256-LBGA, 17 x 17 mm
실장 유형 Surface mount

LPC4337JET256Y 256-lbga, 17 x 17 mm 핀 구성 가이드

LPC4337JET256Y(256-lbga, 17 x 17 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

LPC4337JET256Y의 256-lbga, 17 x 17 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: LPC4337JET256Y.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

LPC4337JET256Y 적합 용도: 6 애플리케이션s: Ethernet-Connected Industrial Controller, USB Interface Equipment, Human-Machine Interface Controller, Embedded Communications Gateway, Precision Timing Control System, Data Acquisition and Storage Controller.

🏭

Ethernet-Connected Industrial Controller

The LPC4337JET256Y fits industrial controllers that require network connectivity alongside deterministic embedded control. Its Arm Cortex-M4 main core can execute the primary control task at up to 204 MHz, while the Cortex-M0 coprocessor can handle supporting processing. The 1 MB flash provides room for communication stacks and application firmware, and the up-to-136 kB SRAM supports protocol buffers and working data. Ethernet enables remote configuration, status reporting, and supervisory control. Designers should partition real-time duties between the two cores, isolate Ethernet routing from sensitive analog paths, and verify the controller's operating-temperature and EMC requirements against the final enclosure and production environment.

🔧

USB Interface Equipment

Two high-speed USB interfaces make the LPC4337JET256Y suitable for equipment that must bridge a host or peripheral connection to embedded control functions. The 204 MHz Cortex-M4 core can manage protocol processing and application logic, while the Cortex-M0 coprocessor can service a lower-overhead task concurrently. With 1 MB of flash, 136 kB of SRAM, and 16 kB of EEPROM, the device supports USB firmware, descriptors, configuration storage, and communication buffers in one package. Board implementation should follow the NXP USB electrical and layout guidance, provide correct connector protection, and separate high-current USB switching paths from sensitive analog and clock circuitry.

📺

Human-Machine Interface Controller

The LPC4337JET256Y is appropriate for human-machine interface controllers that combine local display control with embedded processing. Its LCD support can reduce the peripheral burden associated with display communication, while the Arm Cortex-M4/M0 cores provide 204 MHz processing for graphics updates, input handling, and application logic. The 1 MB flash can store interface firmware and assets, and 16 kB of EEPROM can retain user settings or calibration values. The 256-LBGA package offers many signal options but requires a dense multilayer PCB. Use short, controlled display-interface routing, maintain adequate grounding across the interface domain, and verify timing requirements for the selected LCD and touch subsystem.

🌐

Embedded Communications Gateway

The LPC4337JET256Y can serve as the processing center of an embedded gateway that must translate between Ethernet, USB, and local serial or control interfaces. Ethernet supports upstream connectivity, while two high-speed USB ports can provide device expansion, configuration access, or peripheral bridging. The dual Arm Cortex-M4/M0 architecture allows network work and local control to be allocated efficiently, and the 1 MB flash and 136 kB of SRAM support gateway firmware, protocol state, and buffering. A production design should use the manufacturer's Ethernet and USB reference guidance, isolate external network transceivers from the MCU, and validate thermal performance because the fine-pitch 256-LBGA concentrates both routing density and heat dissipation requirements.

⏱️

Precision Timing Control System

The LPC4337JET256Y fits timing-sensitive control systems that combine high-performance application processing with dedicated configurable peripherals. Its State Configurable Timer can support event counting, timing, and specialized control functions, while the Cortex-M4 core handles the broader control algorithm at up to 204 MHz. The Cortex-M0 coprocessor provides an option for deterministic supporting work, and 136 kB of SRAM can hold motion profiles or control parameters. Timing accuracy still depends on clock configuration, peripheral routing, and firmware discipline. Place clock and control signals away from Ethernet and USB activity, use the manufacturer pin table for every BGA ball, and verify jitter and latency against the actual reference clock and trace topology.

🖥️

Data Acquisition and Storage Controller

The LPC4337JET256Y can coordinate data acquisition, local processing, and nonvolatile storage in embedded systems. Its 204 MHz Cortex-M4/M0 processing supports signal handling and protocol tasks, while the quad SPI Flash Interface provides a path to external flash storage. The internal 16 kB EEPROM can retain calibration coefficients, device identifiers, or operating counters, and the 1 MB program flash can hold acquisition firmware. For repeatable results, control clock jitter, analog grounding, and digital return paths even though the MCU does not perform the analog conversion itself. Confirm SPI signal integrity with the selected flash device, provide the required bypass and clock-routing geometry, and validate write endurance before assigning frequently changing records to EEPROM.

추천 제품 요약

LPC4337JET256 Same LPC4337 device family 사용처: Ethernet-Connected Industrial Controller, USB Interface Equipment, Human-Machine Interface Controller, Embedded Communications Gateway, Precision Timing Control System, Data Acquisition and Storage Controller LPC4337FET256 Same-family Cortex-M4/M0 option 사용처: Ethernet-Connected Industrial Controller, USB Interface Equipment, Human-Machine Interface Controller, Embedded Communications Gateway, Precision Timing Control System, Data Acquisition and Storage Controller
What is the LPC4337JET256Y?
The LPC4337JET256Y is a 32-bit dual-core NXP microcontroller combining an Arm Cortex-M4 main processor with an Arm Cortex-M0 coprocessor. According to the NXP LPC4337JET256 product information, it operates up to 204 MHz, provides 1 MB of flash and up to 136 kB of SRAM, and uses a 256-LBGA package measuring 17 x 17 mm. Its connectivity and programmable peripherals make it appropriate for industrial, communications, USB, and embedded-control equipment.
What are the key specifications of LPC4337JET256Y that engineers should know?
The LPC4337JET256Y combines an Arm Cortex-M4 core and an Arm Cortex-M0 coprocessor with up to 204 MHz operation, 1 MB of flash, 136 kB of SRAM, and 16 kB of EEPROM. NXP also identifies Ethernet, two high-speed USB interfaces, LCD support, quad SPI Flash Interface, State Configurable Timer, and Serial General Purpose I/O peripherals. The package is a 17 x 17 mm 256-LBGA, making fine-pitch PCB layout and assembly inspection essential.
What is the operating frequency of LPC4337JET256Y?
The LPC4337JET256Y operates at up to 204 MHz. According to the NXP LPC4337JET256 product page, the device uses 32-bit Arm Cortex-M4/M0 processing and combines that frequency with up to 1 MB of flash and 136 kB of on-chip SRAM. Actual clock behavior depends on the selected configuration, peripheral requirements, power conditions, and device-specific clock tree settings, so the final operating conditions should be checked against the manufacturer datasheet.
What memory is available on the LPC4337JET256Y?
The LPC4337JET256Y provides 1 MB of flash, up to 136 kB of on-chip SRAM, and 16 kB of EEPROM. According to the NXP LPC4337JET256 product information, the flash is organized as 1M x 8 bits. SRAM supports active program data and buffers, while the EEPROM can retain configuration, calibration, and parameter data without external nonvolatile memory when its endurance and write-cycle requirements fit the application.
Which communication interfaces are supported by LPC4337JET256Y?
The LPC4337JET256Y supports Ethernet, two high-speed USB interfaces, and a quad SPI Flash Interface. NXP also lists LCD support, the State Configurable Timer, and Serial General Purpose I/O among the advanced peripherals. This combination allows the MCU to connect to wired networks, USB hosts or devices, external flash, and display hardware. Protocol speed, signal routing, connector requirements, and device-specific peripheral limitations should be confirmed in the manufacturer documentation.
Where can I download the LPC4337JET256Y datasheet PDF?
The official LPC4337JET256Y documentation is available through NXP's LPC4337JET256 product page at https://www.nxp.com/part/LPC4337JET256. That page links the manufacturer product information and datasheet resources for the LPC435x/3x/2x/1x microcontroller family. Use the manufacturer PDF for the complete pin-description table, electrical characteristics, memory map, clock requirements, USB and Ethernet details, and recommended application circuitry.
Where can I find the LPC4337JET256Y pinout?
The LPC4337JET256Y uses a 256-LBGA package, and its complete ball assignments are documented in the NXP manufacturer datasheet under the package and pin-description information. Use the official pin-description table rather than inferring ball functions from the LPC4337JET256 product image. Because a 256-ball BGA contains power, ground, communications, analog, debug, and GPIO functions, every ball must be checked against the specific device variant before PCB routing.
Is LPC4337JET256Y suitable for industrial control systems?
The LPC4337JET256Y is suitable for many embedded-control systems because it combines 204 MHz Cortex-M4/M0 processing, Ethernet, two high-speed USB interfaces, 136 kB of SRAM, and configurable timing and serial peripherals. The Cortex-M0 coprocessor can support concurrent low-overhead tasks while the main core manages control logic. For deployment in a specific industrial environment, verify operating-temperature limits, EMC requirements, isolation, protection, and any sector-specific certification.
What is the best drop-in replacement for LPC4337JET256Y?
The LPC4337FET256 is the closest identified same-package alternative because it is another 256-LBGA member of the LPC4337 family with the same Arm Cortex-M4/M0 architecture and 204 MHz capability. Its exact device identifier, pin compatibility, memory configuration, and ordering suffix must be compared with the LPC4337JET256Y before substitution. The available cross-reference material does not establish a complete field-qualified drop-in replacement.
Can LPC4337FET256 replace LPC4337JET256Y?
The LPC4337FET256 can be considered for replacement because it shares the LPC4337 family architecture and 256-LBGA format, but it should not be installed automatically into every LPC4337JET256Y design. Confirm the exact pinout, flash size, SRAM configuration, temperature grade, and ordering requirements against the NXP datasheets for both devices. Firmware device identification and peripheral configuration should also be reviewed before production substitution.
What can replace LPC4337JET256Y?
The LPC4337FET256 is the documented same-family candidate for evaluating as a replacement for the LPC4337JET256Y. It offers the same broad Arm Cortex-M4/M0 and 204 MHz architecture in the LPC4337 product line. No cross-brand part has been established as a true 256-ball pin-to-pin drop-in replacement, so firmware, PCB layout, memory, peripherals, qualification, and lifecycle requirements should remain unchanged unless the manufacturer documents otherwise.
Is LPC4337JET256Y the same as LPC4337JET256?
The LPC4337JET256 and LPC4337JET256Y belong to the same NXP LPC4337 family and share the same principal device identity, while the trailing Y distinguishes the specific ordering variant. The manufacturer product page covers LPC4337JET256 and documents its Arm Cortex-M4/M0 architecture, 1 MB flash, 136 kB SRAM, and 16 kB EEPROM. Confirm package, temperature grade, tape-and-reel or tray ordering, and shipping details against the complete ordering information before substitution.
When should I choose LPC4337JET256Y over an alternative MCU?
Choose the LPC4337JET256Y when a design needs the established combination of an Arm Cortex-M4 main core, Cortex-M0 coprocessor, 204 MHz operation, 1 MB flash, Ethernet, two high-speed USB interfaces, and a 256-LBGA footprint. Choose a different device when pin count, memory, peripheral mix, operating temperature, qualification, or long-term availability is more important than retaining this architecture. A cross-brand MCU generally requires software, board, and qualification work beyond a drop-in replacement.
Where can I buy LPC4337JET256Y online?
Use the Request a Quote form on this page to request LPC4337JET256Y availability, current commercial terms, and a quotation. The form provides a consistent route for stock, order quantity, target delivery date, and traceability questions. Price and inventory can change with market conditions, so request the quantity and packaging configuration needed for your production plan rather than relying on a static online listing.
What is the price of LPC4337JET256Y?
The current LPC4337JET256Y quotation depends on order quantity, required packaging, market availability, and component traceability. Use the Request a Quote form on this page for current commercial terms and bulk pricing. When requesting a quotation, state the quantity per order, number of production lots, desired package shipping form, target price, and required delivery date so the response reflects the actual procurement requirement.
What is the lead time for LPC4337JET256Y?
The LPC4337JET256Y lead time depends on current component supply, the requested quantity, and the required shipment form. Submit the quantity and target schedule through the Request a Quote form on this page to obtain a current commitment. For production planning, also identify whether partial deliveries are acceptable and whether each lot must share the same date code, lot code, and traceability documentation.

엔지니어링 참조 데이터: LPC4337JET256Y — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the LPC4337JET256Y when an existing design depends on the LPC4337 combination of Cortex-M4 and Cortex-M0 processing, 204 MHz operation, 1 MB flash, Ethernet, two high-speed USB ports, LCD support, and a 256-LBGA footprint. It is particularly suitable for connected industrial controllers, USB interface equipment, human-machine interfaces, and embedded gateways. Consider LPC4337JET256 when confirming an ordering variant for the same base device family, and evaluate LPC4337FET256 only after checking its device identifier, memory map, temperature grade, and complete pin configuration. A cross-brand Cortex-M microcontroller should be selected only when requirements such as package size, qualification, tooling, lifecycle, or peripherals justify a redesign. Functional equivalence does not establish pin compatibility, and a package match alone is insufficient for an unqualified production substitution.

대체품과의 비교

파라미터 이 제품 LPC4337JET256 LPC4337FET256
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 256-LBGA (17 x 17 mm) 256-LBGA (17 x 17 mm) 256-LBGA (17 x 17 mm)
Processor Cores Arm Cortex-M4 and Arm Cortex-M0 Arm Cortex-M4 and Arm Cortex-M0 Arm Cortex-M4 and Arm Cortex-M0
Maximum Frequency 204 MHz 204 MHz 204 MHz

주요 차별점

  • Dual-core processing within one microcontroller (vs LPC4337FET256)
  • Integrated connectivity for embedded control (vs LPC4337JET256)
  • Substantial internal memory for firmware and buffering (vs LPC4337JET256)

설계 노트

Use the manufacturer package drawing and complete ball-assignment table before routing the 256-LBGA. Confirm the land pattern, ball-map orientation, via-in-pad requirements, solder-mask definition, and assembly process with the selected PCB manufacturer. Place all required decoupling capacitors directly adjacent to the relevant power and ground balls, while keeping the high-speed communication nets short and referenced to a continuous ground plane.

Keep Ethernet, USB, SPIFI, and debug interfaces separated from sensitive analog inputs and clocks. Use short reference-plane connections for high-speed nets, avoid routing over split planes, and place termination or protection components at the correct interface boundary. Because the part has many BGA balls, preserve continuous ground access beneath and between signal fields to limit crosstalk and return-path discontinuities.

Do not substitute a similar LPC43xx suffix solely by matching the package name. Confirm the device identifier, flash configuration, SRAM availability, peripheral set, temperature grade, and orderable suffix for LPC4337JET256Y, LPC4337JET256, and LPC4337FET256. After substitution, verify the boot configuration, clock initialization, pin multiplexing, firmware image, and all exposed communication interfaces.

Estimated thermal behavior must be calculated from the actual junction-temperature limit, ambient temperature, package thermal data, PCB copper area, and estimated internal dissipation. Keep the device away from concentrated heat sources and use the manufacturer land pattern for exposed-pad or thermal-via implementation where applicable. Validate the assembled board in its enclosure because airflow and neighboring components can materially change junction temperature.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Compliance statements require confirmation from the manufacturer product documentation or the device's current declaration. No standard number or qualification status has been assigned without explicit documentation.

데이터 검증일: 2026-11-10 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

LPC4337JET256Y datasheet LPC4337JET256Y datasheet pdf LPC4337JET256Y pinout LPC4337JET256Y 256 LBGA LPC4337JET256Y specifications LPC4337JET256Y 204 MHz LPC4337JET256Y Cortex-M4 M0 LPC4337JET256Y Ethernet USB LPC4337JET256Y equivalent LPC4337JET256Y replacement LPC4337JET256Y vs LPC4337FET256 NXP LPC4337JET256Y LPC4337JET256Y price LPC4337JET256Y stock

관련 부품 & 용어

NXP Semiconductors LPC4337JET256Y LPC4337JET256 LPC4337FET256 Arm Cortex-M4 Arm Cortex-M0 microcontroller dual-core microcontroller embedded processor semiconductor 1 MB flash memory 136 kB SRAM 16 kB EEPROM Ethernet high-speed USB LCD controller quad SPI Flash Interface SPIFI State Configurable Timer SCT Serial General Purpose I/O SGPIO 256-LBGA 17 x 17 mm package surface-mount technology
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기