LPC43S30FET256E - 204MHz Dual-Core MCU | NXP | 256-LBGA
부품 번호: LPC43S30FET256E ✓ 활성LPC43S30FET256E 개요
An Arm Cortex-M4 microcontroller is a 32-bit embedded processor built around the Arm Cortex-M architecture. The LPC43S30FET256E combines a Cortex-M4 main processor with a Cortex-M0 coprocessor, creating a platform within the hierarchy of microcontroller, embedded processor, and semiconductor. This dual-core arrangement allows control-intensive tasks and simpler auxiliary work to be organized within one device.
Key device features include up to 264 kB of SRAM, a hardware AES engine, Ethernet connectivity, two high-speed USB controllers, SCTimer and PWM resources, and the Serial General-Purpose I/O interface. The Cortex-M0 coprocessor is code- and tool-compatible with the Cortex-M4 core and can provide up to 204 MHz performance with a simpler instruction set and reduced code footprint.
The part is ROMless, so an external nonvolatile memory device is required for persistent program storage. The manufacturer identifies the LPC43S30FET256 family for embedded systems combining high-performance control, communications, and configurable timing. Its dual-core architecture can help partition interrupt-heavy or utility workloads, while the Cortex-M0 core supports energy-efficient execution.
Typical applications include industrial automation controllers, Ethernet-connected embedded systems, USB host or device equipment, motor-control and power-management systems, and communications infrastructure requiring multiple serial peripherals. Two high-speed USB controllers are especially useful for systems that need simultaneous USB connectivity, while Ethernet supports network-connected monitoring and control functions.
PCB design should account for the 256-ball BGA footprint, high-speed USB and Ethernet signal routing, and the external memory interface required by the ROMless architecture. Power sequencing, decoupling, and signal-integrity layout should follow the pin-description and layout guidance in the NXP documentation for the LPC43S30FET256 family.
This product page combines the manufacturer overview, exact-orderable-package information, sourcing guidance, drop-in replacement analysis, and practical engineering considerations for the LPC43S30FET256E. It is intended to help engineers confirm architecture, memory, package, connectivity, and replacement requirements before beginning a 256-LBGA layout.
드롭인 대체품: LPC43S30FET256E — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
LPC43S30FET256
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LPC43S30FET256E 최대 정격 & 전기적 특성
| Product Type | 32-bit dual-core microcontroller |
| Main Processor | Arm Cortex-M4 |
| Coprocessor | Arm Cortex-M0 |
| Maximum Processor Frequency | 204 MHz |
| Architecture | ARMv7-M |
| On-Chip SRAM | Up to 264 kB |
| Program Memory | ROMless |
| Ethernet | 1 controller |
| High-Speed USB Controllers | 2 controllers |
| Security Engine | AES engine |
| Configurable Timer/PWM | SCTimer and PWM resources |
| Serial GPIO | SGPIO interface |
| External Bus Width | 16 bit |
| 패키지 | 256-LBGA, 17 x 17 mm |
| Terminal Count | 256 balls |
| 실장 유형 | Surface mount |
LPC43S30FET256E 256-lbga, 17 x 17 mm 핀 구성 가이드
LPC43S30FET256E(256-lbga, 17 x 17 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: LPC43S30FET256E.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
LPC43S30FET256E 적합 용도: 6 애플리케이션s: Industrial Automation Controller, Ethernet-Connected Embedded Control, Dual USB Host and Device Equipment, Motor and Power-System Control, Secure Communications Gateway, Connected Sensor and Monitoring Hub.
Industrial Automation Controller
The LPC43S30FET256E fits industrial automation controllers that combine deterministic control with network connectivity. Its Arm Cortex-M4 main core operates at up to 204 MHz for control logic, while the Cortex-M0 coprocessor can handle simpler background or utility tasks. Up to 264 kB of SRAM supports protocol buffers and working state without requiring large external RAM, while Ethernet enables status reporting and supervisory control. The dual high-speed USB controllers can support service peripherals or a USB host/device function. Design validation should include the exact operating-temperature grade, external memory characteristics, isolated-network requirements, and the 17 x 17 mm 256-LBGA layout.
추천
Ethernet-Connected Embedded Control
The LPC43S30FET256E is appropriate for Ethernet-connected embedded equipment requiring more control capability than a basic connectivity microcontroller. The 204 MHz Cortex-M4 core can process application logic while the Cortex-M0 coprocessor supports auxiliary control tasks, and up to 264 kB of SRAM accommodates network state and data queues. Its AES engine adds hardware-assisted data protection for security-sensitive links. Two high-speed USB controllers allow concurrent USB connectivity where required. Before schematic capture, confirm PHY support, magnetics isolation, stack requirements, Ethernet timing, and the external memory interface required by the ROMless architecture.
추천
Dual USB Host and Device Equipment
The LPC43S30FET256E supports equipment that benefits from two independent high-speed USB controller resources. A Cortex-M4 operating at up to 204 MHz can manage USB tasks, device enumeration, application logic, and protocol processing, while the Cortex-M0 coprocessor can run lighter services. Up to 264 kB of SRAM provides space for descriptors, buffers, and control state, although the ROMless device still requires external program storage. Layout planning must preserve USB impedance-controlled routes, provide clean reference planes, place transceiver and protection components close to the connector, and verify all BGA power and ground connections against the manufacturer package drawing.
추천
Motor and Power-System Control
The LPC43S30FET256E can serve as the supervisory controller in a motor-control or power-system design. Its 204 MHz Cortex-M4 is suited to control-loop processing, while the SCTimer and PWM resources support deterministic timing functions and the Arm Cortex-M0 coprocessor can execute monitoring or communication tasks. Up to 264 kB of SRAM is useful for state machines and sampled data. Ethernet or USB can provide supervisory connectivity without changing the processor architecture. Engineering validation should cover PWM resolution, timer channels, analog interfaces, external memory timing, thermal conditions, and safe behavior during power-up or communications loss.
추천
Secure Communications Gateway
The LPC43S30FET256E suits a secure communications gateway that must handle protocol processing and cryptographic acceleration. The Arm Cortex-M4 provides up to 204 MHz performance for network and application workloads, the Cortex-M0 coprocessor can execute auxiliary tasks, and the hardware AES engine supports efficient encryption and decryption. Ethernet and two high-speed USB controllers create multiple paths for local and network data transfer. Up to 264 kB of SRAM can hold working buffers, but persistent storage must be added because the device is ROMless. Firmware and hardware security validation should include key storage, boot configuration, update strategy, and exact package power requirements.
추천
Connected Sensor and Monitoring Hub
The LPC43S30FET256E can act as the processing hub in a connected monitoring system that combines several serial peripherals with network reporting. The high-performance Cortex-M4 can aggregate sensor data, execute local filtering, and manage communication tasks, while the Cortex-M0 coprocessor can handle simple background operations. Up to 264 kB of SRAM is beneficial for buffering measurements and network packets, and Ethernet provides a path for centralized monitoring. Two high-speed USB controllers can support local service connections. The design should verify available serial interfaces, external memory requirements, environmental limits, watchdog behavior, and the accessibility of the 256-BGA footprint during inspection and assembly.
추천
추천 제품 요약
엔지니어링 참조 데이터: LPC43S30FET256E — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LPC43S30FET256 |
|---|---|---|
| Package | 256-LBGA (17x17) | 256-LBGA (17x17) |
| Brand | NXP Semiconductors | NXP Semiconductors |
| Main Processor | Arm Cortex-M4 | Arm Cortex-M4 |
| Coprocessor | Arm Cortex-M0 | Arm Cortex-M0 |
| Maximum Frequency | 204 MHz | 204 MHz |
| On-Chip SRAM | Up to 264 kB | Up to 264 kB |
| Program Memory | ROMless | ROMless |
| Ethernet | 1 controller | 1 controller |
| High-Speed USB Controllers | 2 controllers | 2 controllers |
| Security Engine | AES engine | AES engine |
| External Bus Width | 16 bit | 16 bit |
| Order-Code Qualification | E suffix | Base family order code; temperature and qualification requirements must be checked |
주요 차별점
- Dual-core processing within one 256-LBGA device (vs LPC43S30FET256)
- Multiple high-bandwidth communication interfaces (vs LPC43S30FET256)
- Hardware-assisted AES support (vs LPC43S30FET256)
설계 노트
Treat the LPC43S30FET256E as a 256-BGA, ROMless design rather than a simple low-pin-count MCU. Route the external program-memory interface according to the NXP family pin description and package layout, and place decoupling capacitors close to the associated BGA power balls. Preserve continuous ground planes under the device and verify via-in-pad or via-adjacent connectivity with the selected assembly process.
Design the USB and Ethernet paths as controlled-impedance interfaces from the first schematic stage. Keep transceiver, protection, and termination components near the connector, avoid stubs and unnecessary layer transitions, and provide a continuous reference plane. The two high-speed USB controllers and Ethernet interface make return-path discontinuities and split-plane errors more consequential than on a low-speed embedded design.
Do not treat the LPC43S30FET256E as having internal flash; the manufacturer identifies the device as ROMless, so an external memory solution and its interface timing must be included in the design. Also verify the meaning of the E suffix, the operating-temperature range, pin multiplexing, and all power pins directly from the ordering information and family documentation before releasing the PCB.
Budget power across the 204 MHz Cortex-M4, Cortex-M0 coprocessor, Ethernet, two high-speed USB controllers, and external memory rather than using a core-only current estimate. Separate active and idle operating conditions, define the acceptable external-clock and suspend behavior, and confirm supply sequencing and voltage limits against the manufacturer documentation for the selected order code.
규정 준수 정보
The NXP product summary does not provide package-specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations for LPC43S30FET256E. Confirm current compliance documentation with NXP for the exact order code. AEC-Q100 is not applicable to this general-purpose microcontroller classification.