Microchip Technology

M2GL005-1VFG256 - 6K LEs IGLOO2 FPGA | Microchip | 256-BGA

부품 번호: M2GL005-1VFG256 ✓ 활성
256-ball FBGA Package 719,872 bits Memory
MOQ: 1 |

M2GL005-1VFG256 개요

The Microchip Technology M2GL005-1VFG256 is a low-density IGLOO2 flash FPGA with 6,060 logic elements, 161 I/O, and 719,872 bits of configuration memory in a 256-ball FBGA package. The device is based on the M2GL005 IGLOO2 family and provides programmable logic for general-purpose functions such as bridging, I/O expansion, data conversion, system management, and secure connectivity. Its 256-ball package is intended for compact, high-density PCB layouts where a large programmable resource set is required in a small area.

A flash FPGA is a semiconductor device whose configuration memory stores the implemented circuit after programming. Because the configuration is retained in flash, the M2GL005-1VFG256 does not require an external configuration PROM for normal operation. It belongs to the broader hierarchy of programmable logic devices, which includes FPGAs, CPLDs, PAL devices, and other configurable semiconductor products. The IGLOO2 family is Microchip's low-density flash FPGA family, combining programmable logic with embedded programmable resources for interface, control, and signal-processing designs.

The M2GL005 device provides 6,060 logic elements and 161 I/O according to the manufacturer product information. The 719,872-bit embedded memory figure identifies the device's configuration-memory density, while the -1 suffix identifies the specific ordering variant. The VFG256 package designation identifies the 256-ball package used by this part. The exact pin assignments, bank voltages, I/O standards, and package dimensions should be taken from the IGLOO2 packaging and pin-description user guide when assigning PCB land patterns and power rails.

The IGLOO2 architecture is suited to designs requiring flexible logic, parallel and serial interfaces, control logic, and modest system-management functions. Its flash configuration supports standalone programmable-logic systems, while its I/O count enables communication interfaces, data acquisition front ends, and general-purpose control platforms. The device family is also used in communications, industrial, medical, and embedded applications, where logic density and package size are balanced against power, cost, and design complexity.

Typical uses include protocol bridging, I/O expansion, interface conversion, system supervision, secure connectivity, and embedded control. A designer can use the 161 available I/O to connect external memories, sensors, transceivers, displays, and industrial peripherals. The 256-ball package also supports dense fanout and fine-pitch routing, so careful PCB layout, decoupling, and via planning are essential. Review the pin-description user guide and the manufacturer datasheet before assigning supply voltages or confirming that a particular I/O standard is available on a specific ball.

When selecting this device, confirm the required logic capacity, I/O count, package, speed grade, temperature grade, and memory configuration before releasing the PCB design. The IGLOO2 packaging guide and the M2GL005 datasheet provide the authoritative electrical, mechanical, and pin-assignment information. This page combines the family-level device identity, package information, programming context, replacement guidance, and design considerations needed for initial component selection.

드롭인 대체품: M2GL005-1VFG256 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: M2GL005-1VFG256 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Configuration Memory, Logic Elements, Device Type, Device Family.

Microchip Technology
Package: 256-ball FBGA (VF256)
Configuration Memory: On-chip non-volatile flash
Device Family: IGLOO 2 low-density FPGA
비교 대상: M2GL005-1VFG256 →
Microchip Technology
Package: 256-LFBGA
Logic Elements: 5K logic elements
Device Type: IGLOO2 flash FPGA
비교 대상: M2GL005-1VFG256 →
Microchip Technology
Package: 256-ball LFBGA
Configuration Memory: On-chip flash
Logic Elements: 6,000 logic elements
비교 대상: M2GL005-1VFG256 →
Microchip Technology
Package: 256-LFBGA
Configuration Memory: Flash-based FPGA configuration
Logic Elements: 6K logic elements
비교 대상: M2GL005-1VFG256 →

M2GL005-VFG256

✅ 드롭인
Microchip Technology
📦 256-ball FBGA (VFG256)
IGLOO2 low-density field-programmable gate array (FPGA) · 6K logic elements · 161 I/O · Flash-based FPGA configuration · 256-LFBGA · In Production · IGLOO2 · Flash field-programmable gate array

가격 문의

데이터시트 보기 →

M2GL005-VFG256I

✅ 드롭인
Microchip Technology
📦 256-ball FBGA (VFG256)
IGLOO2 low-density flash FPGA · 6,060 logic elements · 719,872 RAM bits · 161 I/O · 1.14 V to 2.625 V · 1.2 V · 256-FPBGA, 14 x 14 mm · 256 balls

가격 문의

데이터시트 보기 →

M2GL005-VF256I

✅ 드롭인
Microchip Technology
📦 256-ball FBGA (VF256)
IGLOO2 low-density flash FPGA · 6,000 logic elements · 6,060 cells · 128 Kbits · 64 KB · 703 Kbits · 1.2 V · 1.26 V

가격 문의

데이터시트 보기 →

M2GL005-1VF256

✅ 드롭인
Microchip Technology
📦 256-ball FBGA (VF256)
Microchip Technology · IGLOO 2 low-density FPGA · 6,060 cells · 161 I/O · 1.2 V · 1.26 V · On-chip non-volatile flash · 256-ball FBGA (VF256)

가격 문의

데이터시트 보기 →

M2GL005-VF256

✅ 드롭인
Microchip Technology
📦 256-ball FBGA (VF256)
IGLOO2 flash FPGA · 5K logic elements · 161 I/O · 256-LFBGA · FBGA · Surface mount · Reconfigurable digital logic · Configurable on-chip interconnect

가격 문의

데이터시트 보기 →

M2GL005-1VFG256 최대 정격 & 전기적 특성

Device Type IGLOO2 low-density flash FPGA
Logic Elements 6,060 logic elements
I/O Count 161 I/O
Configuration Memory 719,872 bits
패키지 256-ball FBGA
Package Designation VFG256
Programming Memory Type Flash
Device Family IGLOO2
Product Status In production
Logic Resource Value 6060 cells
General-Purpose Function Bridging, I/O expansion, conversion, system management, and secure connectivity
실장 유형 Surface mount

M2GL005-1VFG256 vfg256 핀 구성 가이드

M2GL005-1VFG256(vfg256 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

M2GL005-1VFG256의 vfg256 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: M2GL005-1VFG256.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

M2GL005-1VFG256 적합 용도: 6 애플리케이션s: Communications Interface Bridging, Industrial I/O Expansion, Medical Monitoring and Control, Secure Connectivity and Authentication, Data Acquisition and Conversion, System Management and Control.

🌐

Communications Interface Bridging

The M2GL005-1VFG256 fits communications interface bridging because it provides 6,060 logic elements and 161 I/O for matching parallel, serial, or mixed-speed interfaces. Place the FPGA between host logic and external transceivers, using programmable logic to translate timing, frame format, buffering, and control signals. Its flash configuration allows the bridge to retain its programmed behavior without an external configuration PROM. The 256-ball package also provides a high pin count for simultaneous control, data, status, and clock routing. Confirm the required I/O voltage, direction, pull capability, and timing against the exact package pin guide before layout.

🏭

Industrial I/O Expansion

The M2GL005-1VFG256 is suitable for industrial I/O expansion when a controller must connect many discrete sensors, actuators, relays, or field-bus devices. Its 161 I/O allow logic to consolidate input qualification, output decoding, latching, and fault reporting while the 6,060 logic elements implement control functions. The flash-based configuration supports deterministic standalone operation after programming. A compact 256-ball FBGA footprint can reduce system size, although high pin density demands careful escape routing, multilayer construction, and precise BGA assembly. Use the package-specific pin descriptions and device electrical limits to assign industrial voltage domains and protection networks.

💊

Medical Monitoring and Control

The M2GL005-1VFG256 can support medical monitoring and control subsystems that require deterministic programmable logic close to sensors and data-conversion circuits. Its 161 I/O can connect acquisition channels, status flags, isolation-control signals, and local actuator drivers, while 6,060 logic elements implement timing and state management. The flash configuration retains the programmed acquisition-control routine in a compact package. Designers should verify temperature grade, supply limits, clock performance, and all I/O standards for the exact ordering code before using the device in medical equipment. The manufacturer datasheet and package pin guide remain the controlling documents for electrical and mechanical implementation.

🔐

Secure Connectivity and Authentication

The M2GL005-1VFG256 can implement programmable secure-connectivity functions such as protocol framing, authentication state machines, key-transfer control, and status monitoring. The 6,060 logic elements provide enough capacity for coordinated control logic, and 161 I/O provide connections to cryptographic, network, and debug peripherals. Because the IGLOO2 configuration is stored in flash, the device can operate as a dedicated local security controller after programming. Security claims still depend on the implemented algorithm, key-management architecture, and system integration rather than the FPGA family alone. Validate timing, I/O standards, and configuration access requirements using the exact device documentation.

📊

Data Acquisition and Conversion

The M2GL005-1VFG256 is suitable for data-acquisition and conversion logic when several parallel data sources must be normalized into a common format. Its 161 I/O can connect ADCs, digital sensors, memory interfaces, counters, and trigger signals, while 6,060 logic elements support buffers, counters, state machines, and data-format conversion. The 256-ball FBGA package helps reduce board area when I/O density is more important than assembly simplicity. For high-performance conversion, verify clock-input limits, supported I/O standards, output timing, and bank power requirements in the exact datasheet. Place decoupling and clock-routing resources according to the manufacturer layout guidance.

🖥️

System Management and Control

The M2GL005-1VFG256 can act as a centralized system-management controller for power sequencing, fault aggregation, watchdog handling, event logging, and peripheral arbitration. Its 161 I/O provide connections to status inputs, reset lines, indicators, and control outputs, while the flash configuration supports standalone operation after power-up configuration. The 6,060 logic elements are appropriate for multiple coordinated state machines rather than a single simple control function. In a compact embedded system, the 256-ball package reduces interconnect count, but it also raises BGA assembly and escape-routing requirements. Confirm startup behavior, configuration pins, and supported I/O types in the M2GL005 package documentation.

What is M2GL005-1VFG256?
The M2GL005-1VFG256 is a Microchip IGLOO2 low-density flash FPGA with 6,060 logic elements, 161 I/O, and 719,872 bits of configuration memory in a 256-ball FBGA package. According to the Microchip M2GL005 product page, the device is intended for programmable functions such as bridging, I/O expansion, data conversion, system management, and secure connectivity. The -1 suffix and VFG256 package designation identify the ordering code and mechanical package.
Where can I download the M2GL005-1VFG256 datasheet PDF?
The official M2GL005-1VFG256 datasheet is available through the Microchip IGLOO 2 FPGA and SmartFusion 2 SoC FPGA datasheet at the manufacturer URL listed on this page. The document covers electrical AC and DC specifications for the M2GL005 device family and related IGLOO 2 devices. For package pin assignments and ball information, use the separate IGLOO 2 FPGA Packaging and Pin Descriptions User Guide.
Where can I find the M2GL005-1VFG256 pinout?
The M2GL005-1VFG256 pinout is documented in the Microchip IGLOO 2 FPGA Packaging and Pin Descriptions User Guide, using the VFG256 package and the M2GL005 BSDL data referenced by the manufacturer. The package contains 256 balls. Use that package-specific pin guide to identify power, ground, configuration, clock, and user I/O balls before routing the PCB.
What are the key specifications of M2GL005-1VFG256 that engineers should know?
The key specifications of the M2GL005-1VFG256 are 6,060 logic elements, 161 I/O, 719,872 bits of flash configuration memory, and a 256-ball FBGA package. The manufacturer describes the M2GL005 family as a low-density IGLOO2 device for general-purpose programmable logic. Exact I/O voltage standards, clock limits, and temperature limits should be selected from the exact ordering code data in the manufacturer datasheet.
Can M2GL005-1VFG256 be used for industrial and communications designs?
Yes, the M2GL005-1VFG256 can be used for general-purpose programmable logic in communications and industrial equipment. Its 161 I/O allow connection to transceivers, memories, sensors, and control peripherals, while the flash configuration retains the programmed design without an external configuration PROM. The final suitability depends on the exact temperature grade, supply voltages, clock requirements, and I/O standards.
Is M2GL005-1VFG256 in stock?
Stock status for the exact M2GL005-1VFG256 ordering code should be confirmed through the Request a Quote form on this page. The Microchip product page identifies the M2GL005 family as in production, while the listed distributor results include the exact M2GL005-1VFG256 part. Use the quote form to request current inventory, minimum order quantity, delivery timing, and traceable supply.
What is the price of M2GL005-1VFG256?
The current commercial price for M2GL005-1VFG256 is not reproduced as static text on this page. Request a current quote through the Request a Quote form on this page, specifying the required quantity, package, and target delivery location. The form is the appropriate channel for checking price and availability without relying on an outdated catalog amount.
What is the lead time for M2GL005-1VFG256?
The current lead time for M2GL005-1VFG256 depends on quantity, production allocation, and shipment destination. Use the Request a Quote form on this page to request a current delivery estimate. Microchip identifies the M2GL005 family as in production, so a procurement inquiry should confirm the exact suffix, package, and any programming or traceability requirements.
M2GL005-1VFG256 vs M2GL005-VFG256 - which is better?
The choice between M2GL005-1VFG256 and M2GL005-VFG256 depends on the required device variant and procurement requirements, because both are listed for the M2GL005 IGLOO2 256-ball VFG256 family. The -1 and non--1 ordering codes should be compared against the exact speed, temperature, and qualification requirements in the manufacturer ordering information. Both listings identify a 6K-LE IGLOO2 device, so they are relevant to the same package-level upgrade path.
What is the difference between M2GL005-1VFG256 and M2GL005-VFG256?
M2GL005-1VFG256 and M2GL005-VFG256 are both Microchip IGLOO2 devices identified with 6,060 logic elements, 161 I/O, and a 256-ball FBGA package. Their ordering-code details must be compared in the manufacturer ordering table, including speed and temperature information. Because the family-level listings do not expose every suffix distinction here, verify the complete ordering code before treating one as a replacement for the other.
When should I choose M2GL005-1VFG256 over another M2GL005 package option?
Choose M2GL005-1VFG256 when the design needs the M2GL005 IGLOO2 resource level of 6,060 logic elements and 161 I/O while also requiring the 256-ball VFG256 footprint. A smaller TQFP package may simplify routing or reduce board area, but it generally provides fewer I/O opportunities than this 256-ball option. Select the exact variant only after checking speed, temperature, and qualification requirements.
Is M2GL005-1VFG256 suitable for I/O expansion and interface conversion?
Yes, the M2GL005-1VFG256 is suitable for I/O expansion and interface conversion because the M2GL005 family provides 6,060 logic elements and 161 I/O. Engineers can use the programmable logic for bridging, data conversion, system management, and control functions around external transceivers, memories, sensors, and displays. The package-specific pin guide must be used to assign the required I/O and power connections.
What can replace M2GL005-1VFG256?
A valid replacement must use the same 256-ball VFG256 footprint and satisfy the required IGLOO2 logic, I/O, speed, temperature, and voltage constraints. M2GL005-VFG256, M2GL005-VFG256I, M2GL005-VF256I, M2GL005-1VF256, and M2GL005-VF256 are package-related M2GL005 candidates to evaluate. Because the visible cross-reference results do not provide a complete pin-to-pin comparison table, confirm the manufacturer package data before approving a substitution.
Is M2GL005-1VFG256 the same as M2GL005-VFG256?
M2GL005-1VFG256 and M2GL005-VFG256 identify closely related M2GL005 IGLOO2 256-ball variants, but the complete ordering codes should not be treated as identical without checking the manufacturer ordering table. Their visible family descriptions both identify 6K LEs and the VFG256 package. Compare the exact speed, temperature, and qualification fields before using one as a drop-in replacement.
What is the best cross-brand equivalent for M2GL005-1VFG256?
A cross-brand equivalent must be selected by exact package, pinout, logic capacity, I/O count, memory requirements, speed, voltage, and temperature rather than by FPGA category alone. The available manufacturer and cross-reference results identify Microchip M2GL005-family package options but do not establish a verified cross-brand pin-to-pin replacement. Use Microchip's cross-reference search and compare the resulting candidate against the IGLOO 2 pin guide before committing to a redesign.

엔지니어링 참조 데이터: M2GL005-1VFG256 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose M2GL005-1VFG256 when a design needs 6,060 IGLOO2 logic elements, 161 I/O, and a 256-ball BGA footprint. It is appropriate for interface bridging, I/O expansion, data conversion, secure connectivity, and centralized system management. M2GL005-VFG256 is the closest same-package ordering candidate when its suffix meets the required speed, temperature, and procurement criteria. Consider M2GL005-VFG256I when its grade designation matches the deployment, but verify the exact ordering table. M2GL005-VF256I, M2GL005-1VF256, and M2GL005-VF256 use related 256-ball family package codes; evaluate them only after comparing the VFG256 and VF256 package definitions ball by ball. Choose a smaller TQFP option when board size or assembly simplicity outweighs I/O density. No cross-brand part should be approved solely from FPGA category or logic-count similarity.

대체품과의 비교

파라미터 이 제품 M2GL005-VFG256 M2GL005-VFG256I M2GL005-VF256I M2GL005-1VF256 M2GL005-VF256
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 256-ball FBGA (VFG256) 256-ball FBGA (VFG256) 256-ball FBGA (VFG256) 256-ball FBGA (VF256) 256-ball FBGA (VF256) 256-ball FBGA (VF256)
Device Family IGLOO2 IGLOO2 IGLOO2 IGLOO2 IGLOO2 IGLOO2
Logic Elements 6,060 logic elements 6K LEs 6K LEs 6K LEs 6K LEs 6K LEs
I/O Count 161 I/O 161 I/O 161 I/O 161 I/O 161 I/O 161 I/O
Configuration Memory 719,872 bits 719,872 bits 719,872 bits 719,872 bits 719,872 bits 719,872 bits
Configuration Memory Type Flash Flash Flash Flash Flash Flash
Ordering Code M2GL005-1VFG256 M2GL005-VFG256 M2GL005-VFG256I M2GL005-VF256I M2GL005-1VF256 M2GL005-VF256
Programming Resource Compatibility IGLOO2 programming flow IGLOO2 programming flow IGLOO2 programming flow IGLOO2 programming flow IGLOO2 programming flow IGLOO2 programming flow

주요 차별점

  • Combines 6,060 logic elements with 161 I/O in one 256-ball device (vs M2GL005-VFG256)
  • Provides a package-level path within the M2GL005 family (vs M2GL005-VF256I)
  • Retains configuration in flash for standalone programmable-logic operation (vs M2GL005-VF256)

설계 노트

Treat the 256-ball FBGA as a high-density escape-routing problem. Follow the manufacturer package drawing and recommended land pattern, confirm the PCB pad geometry and assembly process, and route power, ground, configuration, clock, and user I/O nets with appropriate escape geometry. Maintain continuous return paths beneath high-speed routes and follow the datasheet's layer-stack and decoupling recommendations. Do not derive ball assignments from a generic BGA footprint.

Plan separate core and I/O supply distribution according to the exact IGLOO2 electrical-characteristics table. Place required bulk and high-frequency decoupling capacitors close to the relevant supply balls, with short, low-inductance connections and a solid ground reference. Validate every external interface voltage before connecting it because an I/O standard can only be used when its corresponding supply domain and package pin support it. Power sequencing and configuration-pin requirements must also follow the manufacturer guidance.

Use the M2GL005 VFG256 package pin-description guide and BSDL data to constrain the FPGA design, not an inferred generic pinout. Lock configuration pins, clock inputs, reset behavior, and bank assignments before signal routing. Keep sensitive or high-speed interface paths short, provide adequate escape routing for external memories and transceivers, and match clock distribution to the timing requirements stated for the exact speed grade. Perform signal-integrity review before releasing the layout.

Do not assume that every 256-ball M2GL005 ordering code is a drop-in replacement merely because the ball count matches. Compare VFG256 and VF256 package definitions ball by ball, and check the -1, -I, speed, and temperature portions of the ordering code. Also verify configuration-memory capacity, supported I/O standards, clock limits, and programming-file compatibility. A PCB that uses the correct family but the wrong package code may still require a footprint change.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The product page identifies the M2GL005 family as in production. Specific compliance declarations for the exact M2GL005-1VFG256 ordering code were not established.

관련 검색

m2gl005 vfg256i m2gl005 tqg144i m2gl005 vfg256 m2gl005 tqg144 m2gl005 vfg256i datasheet m2gl005 datasheet M2GL005-1VFG256 datasheet pdf M2GL005-1VFG256 pinout M2GL005-1VFG256 equivalent M2GL005-1VFG256 replacement M2GL005-1VFG256 footprint M2GL005-1VFG256 price M2GL005-1VFG256 vs M2GL005-VFG256 M2GL005 256 FBGA pinout

관련 부품 & 용어

Microchip Technology M2GL005-1VFG256 M2GL005-VFG256 M2GL005-VFG256I M2GL005-VF256I M2GL005-1VF256 M2GL005-VF256 IGLOO2 FPGA field-programmable gate array flash FPGA programmable logic device logic element configuration memory 256-ball FBGA BGA surface-mount semiconductor I/O expansion interface bridging system management secure connectivity data conversion communications industrial control
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기