MAX232BASE+ 2/2 RS-232 Transceiver, 5V | Analog Devices
부품 번호: MAX232BASE+ ✓ 활성MAX232BASE+ 개요
An RS-232 transceiver is an interface IC within the broader hierarchy of interface ICs, serial communication ICs, and semiconductors. It bridges the voltage-domain difference between ordinary digital logic and the bipolar signal levels used by RS-232 links. This conversion allows equipment with a 5 V UART, microcontroller, or general-purpose logic port to communicate with legacy computers, industrial controllers, test systems, and other equipment using the RS-232 standard.
The MAX232BASE+ integrates four key interface functions: two line drivers and two line receivers. Its capacitive voltage generator allows a single +5 V supply to produce the positive and negative voltage levels needed by the drivers. According to the manufacturer datasheet, receiver logic threshold is typically 1.3 V with approximately 0.5 V of typical hysteresis. The receivers can also accept inputs up to ±30 V, providing tolerance for RS-232 voltage excursions.
The device's architecture combines TTL/CMOS-compatible logic-side signals with charge-pump-generated RS-232 levels. The charge pump requires external capacitors, while the receiver and driver sections perform level translation independently. This allows two bidirectional RS-232 channels to be implemented with one 16-pin device. Because the MAX232BASE+ operates from 5 V, it integrates naturally with 5 V UART logic without a separate negative supply for the interface converter.
Typical applications include legacy PC serial-port interfaces, industrial control panels, instrumentation, laboratory equipment, and embedded systems that retain an RS-232 connector. The MAX232BASE+ is especially useful when the host controller uses 5 V logic and the board requires two RS-232 lines rather than a larger multichannel transceiver. Its 16-pin SOIC package also allows a direct replacement strategy when the footprint and electrical behavior match.
Circuit design must provide the charge-pump capacitors and input/output bypass capacitance specified by the manufacturer datasheet. Keep the charge-pump loop compact because those pins carry high-frequency AC current. Connect the logic ground and interface-ground reference as directed by the device documentation, and route the RS-232 connector-side traces away from sensitive analog and clock circuitry to reduce noise pickup.
This page combines the confirmed device specifications, drop-in replacement candidates, package details, and practical circuit guidance for engineers evaluating the MAX232BASE+. It is intended to help with initial design selection, replacement planning, and PCB implementation rather than replace the complete pin-description table, ordering information, or absolute-maximum-rating tables in the manufacturer documentation.
드롭인 대체품: MAX232BASE+ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MAX232BASE+ (동일 폼 팩터 및 풋프린트) — 차이점: Package, Product Type, Interface Standard, ESD Protection, Maximum Data Rate.
MAX232EESE+
✅ 드롭인가격 문의
데이터시트 보기 →MAX232AESE+
✅ 드롭인가격 문의
데이터시트 보기 →MAX232EIDR
✅ 드롭인가격 문의
데이터시트 보기 →MAX3232ECDR
✅ 드롭인가격 문의
데이터시트 보기 →MAX3232CDBR
✅ 드롭인가격 문의
데이터시트 보기 →MAX232BASE+ 사양
| Product Type | Dual RS-232 driver and receiver |
| Driver Count | 2 drivers |
| Receiver Count | 2 receivers |
| Number of Transceivers | 2/2 transceiver |
| 공급 전압 | +5 V |
| Receiver Input Tolerance | ±30 V |
| Receiver Logic Threshold | 1.3 V typical |
| Receiver Hysteresis | 0.5 V typical |
| Output Logic Level | 5 V TTL/CMOS |
| Interface Standard | TIA/EIA-232-F |
| 패키지 | 16-pin SOIC, 0.154 in (3.90 mm) width |
| 실장 유형 | Surface mount |
| Voltage Generator | On-chip capacitive voltage generator |
MAX232BASE+ 16-pin soic, 0.154 in (3.90 mm) width 핀 구성 가이드
MAX232BASE+(16-pin soic, 0.154 in (3.90 mm) width 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: MAX232BASE+.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MAX232BASE+ 적합 용도: 6 애플리케이션s: Legacy PC Serial-Port Interface, Industrial Control Panel Interface, Laboratory Instrument Serial Link, Embedded UART-to-RS-232 Bridge, Instrumentation and Test Equipment, Service and Configuration Port.
Legacy PC Serial-Port Interface
The MAX232BASE+ fits a legacy PC serial-port design that exposes two RS-232 channels from a 5 V UART or controller. Two drivers translate TTL/CMOS command and data signals into TIA/EIA-232-F levels, while two receivers convert the return signals back to 5 V logic. The integrated capacitive voltage generator derives the required bipolar voltages from one +5 V supply. With receiver inputs accepting up to ±30 V, the interface accommodates the voltage excursions characteristic of RS-232 links while keeping the host-side circuitry electrically simple.
추천
Industrial Control Panel Interface
The MAX232BASE+ is suitable for an industrial controller or operator panel that must communicate with older RS-232 equipment. Its two transmitters support command output and status signaling, and its two receivers accept data from a remote controller. The single +5 V supply suits modern embedded electronics, while the charge-pump voltage generator removes the need for a separate negative supply rail. For deployment across industrial temperature ranges, engineers should verify the exact BASE+ temperature rating and consider MAX232EESE+ when its -40°C to +125°C specification satisfies the enclosure environment.
추천
Laboratory Instrument Serial Link
The MAX232BASE+ provides a practical level-conversion stage for laboratory instruments that expose RS-232 connectors but internally operate with 5 V logic. The two drivers can carry measurement commands and configuration data, and the two receivers can return status or readings to a controller. The receiver threshold of 1.3 V typical and hysteresis of 0.5 V typical help distinguish valid signaling around the logic decision region. Keep the 16-pin SOIC close to the connector and place the charge-pump capacitors adjacent to the IC to prevent high-frequency charge-pump activity from coupling into sensitive measurement circuits.
추천
Embedded UART-to-RS-232 Bridge
The MAX232BASE+ is well suited to connecting a 5 V embedded UART to a legacy RS-232 peripheral when only two communication lines are required. One driver converts UART transmit data, and one receiver converts the peripheral's response; the remaining driver and receiver can support a second channel or control signal. Because the transceiver operates from +5 V, it integrates easily with 5 V microcontroller and logic platforms. The implementation must include the specified external charge-pump capacitors and should preserve a common ground reference between the logic system and the RS-232 equipment.
추천
Instrumentation and Test Equipment
The MAX232BASE+ can bridge a test controller to instrumentation that retains an RS-232 command interface. Two RS-232 channels allow separate paths for commands and measurements or for primary and auxiliary equipment. The drivers generate the bipolar levels required by TIA/EIA-232-F, and the receivers provide 5 V TTL/CMOS outputs suitable for digital acquisition logic. To preserve measurement accuracy, route the bipolar connector-side traces away from analog input nodes, keep the charge-pump loop compact, and use the manufacturer bypass recommendations around the supply and interface pins.
추천
Service and Configuration Port
The MAX232BASE+ is appropriate for adding a service or configuration port to a board that needs a standardized RS-232 connection. A system controller can transmit setup commands through one driver and receive diagnostic responses through one receiver, while the second pair supports bidirectional status communication. Using the same +5 V rail as the controller simplifies system power architecture, and the internal voltage generator provides the required positive and negative levels. Design the connector protection and grounding for the expected cable environment, and keep the high-voltage RS-232 routing separated from sensitive logic and analog nets.
추천
추천 제품 요약
엔지니어링 참조 데이터: MAX232BASE+ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MAX232EESE+ | MAX232AESE+ | MAX232EIDR | MAX3232ECDR | MAX3232CDBR |
|---|---|---|---|---|---|---|
| Package | 16-pin SOIC, 0.154 in (3.90 mm) width | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Supply Voltage | +5 V | +5 V | +5 V | +5 V | +5 V | +5 V |
| Interface Standard | TIA/EIA-232-F | RS-232 | RS-232 | RS-232 | RS-232 | RS-232 |
| Special Receiver Features | Conventional RS-232 receiver | Conventional RS-232 receiver | Conventional RS-232 receiver | Conventional RS-232 receiver | Enhanced MAX3232 receiver | Enhanced MAX3232 receiver |
주요 차별점
- Conventional two-channel MAX232 interface (vs MAX3232ECDR)
- Established MAX232 family compatibility (vs MAX232AESE+)
- Wide receiver input tolerance (vs MAX232EIDR)
설계 노트
Place the charge-pump capacitors immediately beside their associated MAX232BASE+ pins and keep the high-frequency loop as small as practical. The capacitive voltage generator switches current between the external capacitors and the device, so long traces and a large loop area can increase EMI and couple noise into nearby circuits. Route the connector-side driver and receiver traces away from precision analog inputs, oscillator nodes, and sensitive timing signals.
Follow the manufacturer circuit for the charge-pump capacitors, interface bypass capacitors, and supply decoupling. Use a low-impedance +5 V connection and place the local bypass capacitor close to the supply pins to suppress switching noise from the voltage generator. Account for capacitor tolerance and effective DC bias when selecting ceramic parts, because changing the capacitance can affect charge-pump performance and the resulting RS-232 output levels.
Do not treat a shared SOIC footprint as sufficient proof that every MAX232 and MAX3232 suffix is interchangeable. Compare the pin descriptions, temperature grade, receiver threshold and hysteresis, shutdown or fail-safe behavior, absolute maximum ratings, and external capacitance requirements. In particular, confirm that the selected replacement retains the required two transmitter channels, two receiver channels, +5 V operation, and acceptable behavior for the RS-232 signals present on the board.
규정 준수 정보
The MAX232BASE+ is a commercial RS-232 interface IC; automotive qualification is not applicable to this grade. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status should be confirmed against the exact manufacturer product documentation and declaration.