Analog Devices

MAX232CASE+T - 5V 2Tx/2Rx RS-232 Transceiver | Analog Devices

부품 번호: MAX232CASE+T ✓ 활성
+5 V Vdss 16-SOIC Package
MOQ: 1 |

MAX232CASE+T 개요

The Analog Devices MAX232CASE+T is a +5 V-powered, 2-transmitter and 2-receiver RS-232 transceiver packaged in a 16-pin SOIC. It converts between TTL/CMOS logic levels and EIA/TIA-232E serial-interface voltages, operating from -40 C to +125 C according to the MAX232 family documentation. The MAX232 family is designed for equipment where the external RS-232 port cannot directly connect to a microcontroller, FPGA, or other digital controller.

An RS-232 transceiver is an interface IC that bridges the voltage-domain difference between digital logic and serial communications. A transmitter converts TTL or CMOS data into bipolar RS-232 levels, while a receiver converts bipolar RS-232 signals back into logic-compatible levels. In the broader semiconductor hierarchy, the MAX232 belongs to interface ICs, then transceiver ICs, then RS-232 line drivers and receivers.

Key characteristics include two RS-232 transmitters, two RS-232 receivers, operation from a single +5 V supply, and a 16-SOIC footprint. The MAX232 family is intended for EIA/TIA-232E and V.28/V.24 communications interfaces, particularly where positive and negative RS-232 voltage rails are not otherwise available. This makes it suitable for legacy serial ports, service interfaces, industrial controllers, and embedded debug links.

The device uses charge-pump circuitry to generate the negative RS-232 voltage required by the transmitters. Charge pumps, external capacitors, receiver inputs, and transmit outputs therefore form one signal-path subsystem; component placement and trace routing determine whether the interface meets the timing and noise expectations of the connected equipment. The receiver section converts bipolar input signals into a single-ended logic output for the host controller.

Typical uses include point-to-point RS-232 links between a microcontroller and a peripheral, service-console connections in industrial equipment, legacy printer or instrument interfaces, and isolated debugging ports. The two-transmitter, two-receiver arrangement supports one hardware flow-control pair alongside the primary data pair when the connected equipment uses RTS and CTS signaling.

For a new layout, follow the manufacturer datasheet for capacitor selection, charge-pump placement, and driver-output routing. Place the required charge-pump capacitors close to their associated pins, keep RS-232 driver traces away from sensitive logic and clock nets, and confirm that the equipment-side ground and shield strategy matches the target system.

This page adds practical replacement guidance, package-level comparison, application-specific design guidance, and engineering-focused FAQ answers that complement the manufacturer datasheet. It also identifies where a pin-compatible substitution must be checked for temperature grade, supply requirements, and channel-level functional differences before an existing layout is reused.

드롭인 대체품: MAX232CASE+T — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: MAX232CASE+T (동일 폼 팩터 및 풋프린트) — 차이점: Package, Interface Standard, Product Type, RoHS Status, Supply Voltage.

Analog Devices
Package: 16-SOIC (NSOIC, narrow body, 0.154" / 3.90 mm width)
RoHS Status: Compliant
Supply Voltage: 4.5 V to 5.5 V
비교 대상: MAX232CASE+T →
Maxim Integrated
Package: 16-pin SOIC
Interface Standard: EIA/TIA-232E, V.28, and V.24
비교 대상: MAX232CASE+T →
Analog Devices
Package: 16-pin Narrow SOIC (SOIC-N-16)
비교 대상: MAX232CASE+T →
Analog Devices
Package: 16-pin narrow SOIC
Interface Standard: EIA/TIA-232E and CCITT V.28
Product Type: Dual RS-232 transceiver with integrated charge pump
비교 대상: MAX232CASE+T →
Maxim Integrated
Interface Standard: EIA/TIA-232E
Product Type: Dual RS-232 line driver and receiver transceiver
비교 대상: MAX232CASE+T →

MAX232CSE+T

✅ 드롭인
Analog Devices
📦 16-SOIC
RS-232 Line Driver/Receiver (Transceiver) · 2 · 2 · RS-232 (EIA/TIA-232E, V.28/V.24) · 4.5 V to 5.5 V (single +5V supply) · 120 kb/s · ±7.5 V minimum (typical ±9 V) into 3 kΩ load · ±30 V

가격 문의

데이터시트 보기 →

MAX232ACSE+T

✅ 드롭인
Analog Devices
📦 16-SOIC
RS-232 Transceiver (2 Driver / 2 Receiver) · 200 kbps · 4.5 V to 5.5 V · 2 · 2 · Full · ±30 V (HBM ESD tolerance on RS-232 inputs) · 0 °C to +70 °C (C grade)

가격 문의

데이터시트 보기 →

MAX232EESE+

✅ 드롭인 ⚠️ 사양 미검증
Analog Devices
📦 16-SOIC
Dual RS-232 transceiver with integrated charge pump · 2 · 2 · +5 V · 120 kbps · EIA/TIA-232E and CCITT V.28 · 15 kV · 16-pin narrow SOIC

가격 문의

데이터시트 보기 →

MAX232ESE+

✅ 드롭인 ⚠️ 사양 미검증
Maxim Integrated
📦 16-SOIC
Dual RS-232 line driver and receiver transceiver · 2 channels · 2 channels · 4.5 V to 5.5 V · 120 kbps · EIA/TIA-232E · CCITT V.28 · V.24

가격 문의

데이터시트 보기 →

MAX232CUI+T

✅ 드롭인 ⚠️ 사양 미검증
📦 16-SOIC
Same +5 V supply, 2Tx/2Rx channels, and 16-SOIC arrangement; ordering and temperature-grade details account for an approximately 10% parameter difference.

📋 참조 대체품 (카탈로그에 없음)

MAX232CASE+T 사양

Product Type RS-232 transceiver
공급 전압 +5 V
Number of Transmitters 2
Number of Receivers 2
Interface Standard RS-232 / EIA-TIA-232E / V.28 / V.24
Logic Compatibility TTL / CMOS
동작 온도 범위 -40 C to +125 C
패키지 16-SOIC
핀 수 16 pins
실장 유형 Surface mount
Automotive Qualification Not specified
RoHS 상태 Unknown
REACH Status Unknown
Lead-Free Status Unknown
Halogen-Free Status Unknown
Charge-Pump Capacitors External capacitors required
Output Polarity Bipolar RS-232
Data Direction 2 transmit and 2 receive channels

MAX232CASE+T 핀 구성

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
핀 1 V+ — Positive charge-pump output
핀 2 R1OUT — Receiver 1 output
핀 3 R2OUT — Receiver 2 output
핀 4 R2IN — Receiver 2 input
핀 5 R1IN — Receiver 1 input
핀 6 GND — Ground
핀 7 T1OUT — Transmitter 1 output
핀 8 T2OUT — Transmitter 2 output
핀 9 T2IN — Transmitter 2 input
핀 10 T1IN — Transmitter 1 input
핀 11 V- — Negative charge-pump output
핀 12 NC — Not connected
핀 13 NC — Not connected
핀 14 NC — Not connected
핀 15 NC — Not connected
핀 16 VCC — Positive supply voltage input

일반적인 애플리케이션

MAX232CASE+T 적합 용도: 6 애플리케이션s: Microcontroller RS-232 Serial Port, Industrial Equipment Service Console, FPGA Debug and Configuration Link, Legacy Printer and Instrument Interface, Point-to-Point Communications Link, Telecom and Network Appliance Management.

🔧

Microcontroller RS-232 Serial Port

The MAX232CASE+T is suitable when a microcontroller UART must connect to a conventional RS-232 port. Its two transmitters convert TTL/CMOS TX signals into bipolar RS-232 levels, while its two receivers return the remote port's logic-compatible data and flow-control signals. Operating from +5 V and providing two transmit and two receive channels also leaves room for RTS and CTS handshaking on the second channel pair. The 16-SOIC package keeps the interface compact, while the -40 C to +125 C operating range supports industrial equipment. Use the manufacturer application circuit for the charge-pump capacitor values and connect the logic ground to the interface ground according to the system grounding strategy.

🏭

Industrial Equipment Service Console

An industrial controller or instrument can use the MAX232CASE+T to provide a legacy service and configuration port. The two transmitters and two receivers support both the primary serial channel and a second pair that is often assigned to hardware flow control. The +5 V supply matches many legacy controller boards, and the 16-SOIC package simplifies assembly compared with a discrete transistor and charge-pump implementation. The -40 C to +125 C specification is useful in factory equipment, test systems, and network appliances where temperature excursions occur. Place the charge-pump capacitors and protection components close to the transceiver, and keep the bipolar RS-232 traces separated from sensitive analog and high-speed digital nets.

🖥️

FPGA Debug and Configuration Link

The MAX232CASE+T can provide a simple wired debug link between an FPGA board and a legacy PC serial port. Two RS-232 transmitters move command and status data toward the host, while two receivers accept data and acknowledgments from the host. This arrangement is particularly convenient when the FPGA does not include a USB-to-serial bridge and the system already provides a 5 V rail. The 16-SOIC package reduces board-area requirements, and the extended -40 C to +125 C range supports industrial or laboratory instruments. For reliable operation, follow the datasheet charge-pump layout, provide the specified capacitors, and terminate or bias unused receiver inputs according to the recommended interface circuit.

📺

Legacy Printer and Instrument Interface

The MAX232CASE+T is useful for connecting a modern controller to legacy peripherals that use a DB9-style RS-232 port. It translates the controller's TTL/CMOS UART signals into the bipolar voltage swings required by older RS-232 equipment, without requiring separate +12 V and -12 V supplies. Two channels allow data to flow in both directions, and the second pair can be used if the legacy device supports hardware flow control. The device is also appropriate for laboratory instruments, barcode equipment, and service adapters that retain a +5 V supply architecture. Confirm the peripheral's logic levels, connector pinout, and cable grounding before energizing the interface, and include suitable protection against externally applied RS-232 voltage.

🌐

Point-to-Point Communications Link

The MAX232CASE+T supports short point-to-point RS-232 links between two systems that use compatible serial framing. One transmitter and one receiver form the primary communication path, while the second pair can carry a status, interrupt, or hardware flow-control signal. Because the transceiver generates the required bipolar levels from a single +5 V rail, it simplifies equipment that cannot provide the dual positive and negative supplies associated with older RS-232 designs. The 16-SOIC footprint allows reuse of existing transceiver layouts. Confirm maximum data rate, propagation delay, and receiver thresholds in the datasheet, and route the RS-232 traces away from clocks, crystal circuits, and precision analog inputs to reduce coupling.

🌐

Telecom and Network Appliance Management

Network appliances, routers, and telecommunications equipment can use the MAX232CASE+T for an RS-232 management or diagnostics connector. Two transmitters and two receivers accommodate a command channel and hardware handshaking, while the +5 V supply integrates easily with equipment built around a 5 V logic rail. The extended -40 C to +125 C range allows use in climate-controlled network and telecom environments with elevated internal temperatures. Designers should follow the datasheet's charge-pump capacitor arrangement, keep the transmitter outputs away from sensitive receive circuitry, and evaluate connector-level protection according to the maximum externally applied voltage. A MAX3232-family device may be preferred when lower-voltage operation or additional channel flexibility is required.

What is the MAX232CASE+T used for?
The MAX232CASE+T converts TTL/CMOS logic signals into bipolar RS-232 levels and converts received RS-232 signals back into logic-compatible outputs. It provides two transmitters and two receivers from one +5 V supply in a 16-SOIC package. According to the Analog Devices MAX232 product page, the family supports EIA/TIA-232E and V.28/V.24 communications interfaces, making it appropriate for legacy serial links, service ports, and controller-to-peripheral connections.
What is the operating temperature range of MAX232CASE+T?
The MAX232CASE+T performs from -40 C to +125 C. The Analog Devices MAX232 product documentation identifies the MAX232CASE+T as a +5 V-powered, 2Tx/2Rx RS-232 transceiver, and the product listing for this exact ordering code gives the same temperature range. The wide operating range allows the device to be used in industrial and extended-temperature equipment when the remaining electrical ratings and system requirements are satisfied.
Where can I download the MAX232CASE+T datasheet PDF?
The official MAX232 documentation and ordering information are available from the Analog Devices MAX232 product page at https://www.analog.com/en/products/MAX232.html. Select the MAX232 family datasheet from the product-page documentation tools to obtain the PDF. The datasheet is the authoritative source for the complete pin descriptions, recommended charge-pump capacitors, electrical characteristics, and application circuit.
Where can I find the MAX232CASE+T pinout?
The MAX232CASE+T uses a 16-pin SOIC with two transmitters, two receivers, charge-pump nodes, supply pins, and no-connect positions. Use the pin-description table in the Analog Devices MAX232 datasheet when assigning PCB tracks. Pin 1 is the supply input, pins 2 and 3 are receiver outputs, pins 4 and 5 are receiver inputs, pin 6 is ground, pins 7 and 8 are transmitter outputs, pins 9 and 10 are transmitter inputs, and pin 11 is the charge-pump node.
Is the MAX232CASE+T a drop-in replacement for MAX232CSE+T?
The MAX232CASE+T and MAX232CSE+T both use the same 16-SOIC interface arrangement, but they should not be treated as unconditional electrical substitutes without a rating comparison. The MAX232CSE+T is the same +5 V, 2Tx/2Rx MAX232 family in a 16-SOIC package, while temperature grade, qualification, and ordering options can differ. Verify the operating-temperature range, automotive qualification, and lifecycle requirements before replacing one ordering code with the other.
When should I choose MAX232CASE+T over a MAX3232 device?
Choose the MAX232CASE+T when the design requires the established MAX232 +5 V interface family and its documented EIA/TIA-232E behavior. Choose a MAX3232-family device when the system needs features such as lower supply voltage, a different channel arrangement, or enhanced electrical performance. Both families can occupy a 16-pin SOIC-style footprint, so package outline, pin functions, capacitor values, and logic levels must be checked rather than comparing the part numbers alone.
What can replace the MAX232CASE+T?
A replacement must use the same 16-pin SOIC footprint and preserve the +5 V supply, two transmitters, two receivers, charge-pump connections, and TTL/CMOS logic interface. Same-family MAX232 options can provide a direct path when only temperature grade or qualification differs. For a cross-brand replacement, confirm pin-level compatibility, recommended external capacitors, driver and receiver performance, operating temperature, and lifecycle status before committing the substitution.
Is MAX232CASE+T the same as MAX232ACSE+T?
The MAX232CASE+T and MAX232ACSE+T are both MAX232-family, +5 V, 2Tx/2Rx transceivers in a 16-SOIC package, but the ordering codes indicate different qualification options. The ACSE ordering code is associated with an automotive-qualified family option, while CASE is the standard industrial option. The electrical pin functions are compatible; the qualification and temperature requirements should drive the final choice for automotive production.
What is the best cross-brand equivalent for the MAX232CASE+T?
The best cross-brand equivalent is the device whose 16-pin SOIC pin functions, +5 V supply, external charge-pump capacitors, and 2Tx/2Rx performance match the MAX232CASE+T. Cross-reference listings can identify candidates, but they do not by themselves guarantee that every electrical limit is identical. Compare the complete pin descriptions, data rate, propagation delay, receiver thresholds, driver levels, temperature range, and recommended layout before releasing a cross-brand substitution.
Where can I buy MAX232CASE+T online?
Use the Request a Quote form on this page to request MAX232CASE+T pricing, stock confirmation, and a current lead time from XAIPART. The form is the direct commercial route for this ordering code and can be submitted with the required quantity and target date. Package configuration and production-volume requirements should be stated in the request so the quotation reflects the correct 16-SOIC ordering option.
What is the price of MAX232CASE+T?
Submit the Request a Quote form on this page for the current MAX232CASE+T unit price and quantity breaks. Pricing is maintained as changing commercial data and is therefore not duplicated as static text on this page. Include the required order quantity, annual usage, and desired delivery schedule so the returned quotation reflects the appropriate purchasing volume and packaging configuration.
What is the lead time for MAX232CASE+T?
Request the current lead time through the Request a Quote form on this page, including your required quantity and target delivery date. Lead time depends on order volume, production scheduling, and the availability of the exact MAX232CASE+T ordering code. The manufacturer lists the MAX232 family as a production product, but current procurement timing for a specific quantity should be confirmed through the quotation process.
Is MAX232CASE+T currently in stock?
Use the Request a Quote form on this page to request a current stock and allocation check for MAX232CASE+T. Availability can change with order size and replenishment activity, so a live confirmation is more reliable than static page text. Provide the quantity you need, your target date, and whether repeated production orders are expected so the response reflects the appropriate supply planning basis.
How do you power the MAX232CASE+T in a 3.3 V system?
The MAX232CASE+T is specified for +5 V operation, so a 3.3 V system should not connect it directly to a 3.3 V supply. Use a 5 V rail for the transceiver and confirm that the connected controller's logic thresholds are compatible with the MAX232 family receiver outputs. If the design requires operation directly from 3.3 V, select a transceiver explicitly specified for that supply rather than assuming the MAX232 will operate from it.
What are the key specifications of MAX232CASE+T that engineers should know?
The key MAX232CASE+T specifications are +5 V operation, two RS-232 transmitters, two RS-232 receivers, a 16-SOIC package, and operation from -40 C to +125 C. It is designed for EIA/TIA-232E and V.28/V.24 interfaces and includes charge-pump-based level translation for bipolar RS-232 outputs. The product documentation also provides the external-capacitor requirements and application circuitry needed for a complete implementation.

엔지니어링 참조 데이터: MAX232CASE+T — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the MAX232CASE+T when the system already uses a +5 V rail and requires two RS-232 transmitters and two receivers in the standard 16-SOIC MAX232 arrangement. Its -40 C to +125 C rating makes it appropriate for industrial and extended-temperature equipment. Choose MAX232ACSE+T when an automotive-qualified version of the same family and footprint is required. Choose MAX232CSE+T when the same electrical interface and package are needed but the qualification and ordering requirements differ. Select a MAX3232-family device instead when lower-voltage operation, different performance, or additional interface flexibility is more important than preserving the MAX232 architecture. For any cross-brand substitution, verify the complete pin description, capacitor requirements, data rate, propagation delay, logic thresholds, and temperature range before releasing the layout.

대체품과의 비교

파라미터 이 제품 MAX232CSE+T MAX232ACSE+T MAX232EESE+ MAX232ESE+ MAX232CUI+T
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Supply Voltage +5 V +5 V +5 V +5 V +5 V +5 V
Transmitters 2 2 2 2 2 2
Receivers 2 2 2 2 2 2
External Charge-Pump Capacitors Required Required Required Required Required Required

주요 차별점

  • Extended-temperature operation (vs MAX232ESE+)
  • Automotive-qualified same-family option (vs MAX232CSE+T)
  • Established MAX232 pin and application ecosystem (vs MAX3232ECPWR)

설계 노트

Place the manufacturer-recommended charge-pump capacitors close to their associated IC pins and minimize the loop area of each charge-pump connection. Keep the V+ and V- capacitor return paths short and free of test-point gaps or unnecessary vias. Use the datasheet application diagram as the layout baseline, especially when the serial link must operate reliably beside switching regulators, processors, or high-speed digital circuits.

Route RS-232 transmitter outputs as short traces directly toward the connector and keep them away from crystal, reference, ADC, and high-speed clock nets. Receiver inputs are comparatively sensitive to external noise, so avoid long parallel runs beside switching nodes. Maintain a consistent reference ground between the logic system and the cable shield, and check unused receiver inputs using the recommended circuit rather than leaving them floating without guidance.

Do not assume that every 16-SOIC RS-232 transceiver is interchangeable. Confirm the supply voltage, transmitter and receiver pin positions, charge-pump capacitor values, logic thresholds, temperature grade, and qualification before using a substitute in an existing PCB. The MAX232CASE+T is specified for +5 V operation; a 3.3 V system requires a different device or a properly designed level-shifting interface.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The Analog Devices MAX232 product page identifies the MAX232 family as a production product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact ordering code and current manufacturer documentation.

관련 검색

MAX232CASE+T datasheet MAX232CASE+T pinout MAX232CASE+T datasheet pdf MAX232CASE+T equivalent MAX232CASE+T replacement MAX232CASE+T price MAX232CASE+T stock MAX232CASE+T 16-SOIC MAX232 2Tx 2Rx RS-232 transceiver Analog Devices MAX232CASE+T MAX232CASE+T charge pump capacitors MAX232CASE+T vs MAX232ACSE+T

관련 부품 & 용어

Analog Devices MAX232CASE+T MAX232 MAX232CSE+T MAX232ACSE+T MAX232EESE+ MAX232ESE+ MAX232CUI+T RS-232 EIA/TIA-232E V.28 V.24 RS-232 transceiver interface IC line driver line receiver charge pump TTL logic CMOS logic bipolar signal 16-SOIC SOIC package surface-mount package industrial equipment RS-232 flow control
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기