Texas Instruments

MAX232ECPWR - 250kbps RS-232 Transceiver | Texas Instruments (Tape & Reel)

부품 번호: MAX232ECPWR ✓ 활성
4.5V to 5.5V Vdss 16-pin TSSOP Package
MOQ: 1 |

MAX232ECPWR 개요

The Texas Instruments MAX232ECPWR is a 5V dual-channel RS-232 transceiver with two drivers and two receivers, a 250kbps data rate, and a 16-pin TSSOP package. It operates from a 4.5V to 5.5V supply and includes IEC 61000-4-2 electrostatic-discharge protection.

An RS-232 transceiver is an interface IC that connects low-voltage TTL or CMOS logic to the bipolar voltage levels used by RS-232 equipment. The driver channels convert logic signals into RS-232 output levels, while the receiver channels convert incoming RS-232 signals into logic-compatible levels. A MAX232E-family device also contains a charge-pump voltage generator, allowing bipolar RS-232 levels to be produced from a single 5V supply.

The MAX232ECPWR combines two transmit channels, two receive channels, and electrostatic-discharge protection in one compact 16-TSSOP package. Its stated 250kbps rate suits short-distance point-to-point serial links, including industrial-control equipment, data-acquisition systems, service interfaces, and legacy computer peripherals. The integrated protection improves robustness in connector-adjacent circuits where electrostatic discharge is a realistic concern.

Technically, the MAX232ECPWR is designed for a single 5V supply and combines its charge-pump circuitry, drivers, and receivers in one interface device. The dual-driver and dual-receiver arrangement supports two independent RS-232 directions on a point-to-point link. Its 250kbps maximum signaling rate is substantially faster than conventional asynchronous RS-232 links, although cable length, capacitance, grounding, and driver loading still determine achievable communication distance.

Typical uses include programmable-logic-controller service ports, industrial serial adapters, instrumentation control links, embedded-system debug connections, and communications between equipment with legacy DB9 or equivalent RS-232 ports. The MAX232ECPWR is particularly appropriate where a compact surface-mount implementation and protected RS-232 line interface are required without a separate external protection network.

PCB design should follow the capacitor and charge-pump requirements in the manufacturer datasheet, because the voltage generator depends on correctly sized charge-pump capacitors. Keep the RS-232 connector-side traces away from sensitive logic, provide a low-impedance ground reference, and place input and charge-pump capacitors close to their associated pins.

This product page combines the MAX232ECPWR electrical characteristics, package information, compatible alternatives, application guidance, and practical design notes to support faster component selection and PCB implementation.

드롭인 대체품: MAX232ECPWR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: MAX232ECPWR (동일 폼 팩터 및 풋프린트) — 차이점: Product Type, Package, Maximum Data Rate, Supply Voltage Range, ESD Protection.

Texas Instruments
Product Type: Dual RS-232 driver and receiver transceiver
Maximum Data Rate: 250 kbps
비교 대상: MAX232ECPWR →
Texas Instruments
Product Type: Dual RS-232 line transceiver
Supply Voltage Range: 3 V to 5.5 V
비교 대상: MAX232ECPWR →
Texas Instruments
Product Type: Dual RS-232 line driver and receiver
Package: 16-pin TSSOP (PW)
Maximum Data Rate: 250 kbps
비교 대상: MAX232ECPWR →

MAX232EIPWR

✅ 드롭인 ⚠️ 사양 미검증
Texas Instruments
📦 16-pin TSSOP
Dual RS-232 driver and receiver transceiver · 2 channels · 2 · 2 · 5 V · 250 kbps · Approximately -9 V to +9 V · TIA/EIA-232-F input converted to 5 V TTL/CMOS

가격 문의

데이터시트 보기 →

MAX3232ECPW

✅ 드롭인 ⚠️ 사양 미검증
Texas Instruments
📦 16-pin TSSOP
Dual RS-232 line transceiver · 3 V to 5.5 V · 2 channels · 2 channels · 250 kbit/s · 30 V/µs · ±15 kV · TIA/EIA-232-F

가격 문의

데이터시트 보기 →

MAX3232EIPWRG4

✅ 드롭인 ⚠️ 사양 미검증
Texas Instruments
📦 16-pin TSSOP
Dual RS-232 line driver and receiver · 2 · 2 · 3 V to 5.5 V · 250 kbps · RS-232 · TIA/EIA-232-F and ITU V.28 · ±15 kV IEC ESD protection

가격 문의

데이터시트 보기 →

MAX232AEEPE

✅ 드롭인 ⚠️ 사양 미검증
📦 16-pin TSSOP
Same MAX232E-family dual RS-232 function in a 16-pin TSSOP candidate; exact suffix availability and pin assignment require confirmation

📋 참조 대체품 (카탈로그에 없음)

TRS232EIPWR

✅ 드롭인
📦 16-pin TSSOP
Cross-brand candidate in the comparison results with the same 16-pin TSSOP form factor; 5V, 250kbps, pin, and capacitor details require confirmation

📋 참조 대체품 (카탈로그에 없음)

MAX232ECPWR 사양

Product Type RS-232 transceiver
Number of Drivers 2
Number of Receivers 2
Channel Configuration 2/2 full RS-232 transceiver
Supply Voltage Range 4.5V to 5.5V
Nominal Supply Voltage 5V
Maximum Data Rate 250kbps
ESD Protection IEC 61000-4-2
Logic Compatibility 5V TTL/CMOS
RS-232 Standard Level TIA/EIA-232-F
패키지 16-pin TSSOP
실장 유형 Surface mount
Driver Output Type RS-232 bipolar line driver
Receiver Output Type TTL/CMOS logic receiver
Voltage Generation Single 5V supply with capacitive voltage generator

MAX232ECPWR 16-pin tssop 핀 구성 가이드

MAX232ECPWR(16-pin tssop 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

MAX232ECPWR의 16-pin tssop 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MAX232ECPWR.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MAX232ECPWR 적합 용도: 6 애플리케이션s: Programmable Logic Controller Service Port, Industrial Data Acquisition Equipment, Embedded System Debug Interface, Legacy Computer Peripheral Connection, Instrumentation Control and Service Link, Industrial Networking Gateway.

🏭

Programmable Logic Controller Service Port

The MAX232ECPWR fits legacy PLC service ports because its two drivers and two receivers provide a complete point-to-point RS-232 interface from a single 5V rail. Its 250kbps maximum signaling rate is suitable for configuration downloads, status exchange, and short diagnostic sessions. IEC 61000-4-2 protection adds useful resilience where the serial connector is exposed to electrostatic discharge. The 16-pin TSSOP package also keeps the interface compact enough for space-constrained controller boards.

⚡

Industrial Data Acquisition Equipment

The MAX232ECPWR can connect laboratory and industrial data-acquisition equipment to a legacy RS-232 controller. Two transmit and two receive channels support bidirectional command and measurement traffic, while the 250kbps rate accommodates moderate-rate instrument data. Operating from 4.5V to 5.5V simplifies integration with conventional 5V logic. Its documented IEC 61000-4-2 protection is especially useful in industrial environments where exposed cables and connector contacts can receive electrostatic discharge.

🧩

Embedded System Debug Interface

The MAX232ECPWR is useful for a legacy debug or configuration interface because it translates between 5V TTL or CMOS logic and RS-232 line levels. A pair of driver and receiver channels allows command transmission and status reception through one compact device. The 250kbps signaling limit supports firmware logs, bootloader messages, and diagnostic commands. IEC 61000-4-2 protection helps protect the interface when the cable is connected to a user-accessible service connector.

🖥️

Legacy Computer Peripheral Connection

The MAX232ECPWR provides a modern surface-mount bridge for legacy DB9-style RS-232 ports on industrial computers, test systems, and service equipment. Its dual-channel arrangement is sufficient for transmit, receive, and hardware-flow-control signals commonly found on RS-232 links. The 5V supply range matches many embedded and legacy interface designs, while the TSSOP package reduces board area compared with older through-hole transceivers. Ensure the connector's signal-to-ground arrangement and cable length match the application.

🔧

Instrumentation Control and Service Link

The MAX232ECPWR can serve as the service communications path in programmable instrumentation and test equipment. Its 250kbps rate is suitable for commands, calibration data, and periodic status reporting, while two drivers and two receivers support a standard bidirectional console connection. The single 5V architecture reduces the number of rails required around legacy serial hardware. IEC 61000-4-2 protection improves interface robustness when users connect service leads to external equipment in laboratories or production areas.

🌐

Industrial Networking Gateway

The MAX232ECPWR can provide the legacy serial port on a gateway that bridges older equipment to a modern network. Bidirectional RS-232 communication allows the gateway to exchange configuration commands and telemetry with controllers that lack Ethernet connectivity. The 250kbps data rate suits supervisory traffic rather than bulk data transfer. Its 16-pin TSSOP footprint and integrated ESD protection make it practical for compact industrial interface cards, subject to proper grounding and cable-side surge protection.

What is the MAX232ECPWR?
The MAX232ECPWR is a Texas Instruments dual RS-232 transceiver containing two drivers, two receivers, a charge-pump voltage generator, and IEC 61000-4-2 electrostatic-discharge protection. According to the Texas Instruments manufacturer datasheet, it operates from a 4.5V to 5.5V supply, supports data rates up to 250kbps, and is packaged in a 16-pin TSSOP for surface-mount PCB assembly.
What are the key specifications of MAX232ECPWR that engineers should know?
The MAX232ECPWR provides a 2/2 RS-232 channel configuration, a 4.5V to 5.5V supply range, and a maximum data rate of 250kbps. The Texas Instruments manufacturer datasheet identifies the device as a 16-pin TSSOP dual driver/receiver with IEC 61000-4-2 protection. Its two drivers convert TTL or CMOS logic into RS-232 levels, while its two receivers convert incoming bipolar signals back into logic-compatible outputs.
Where can I download the MAX232ECPWR datasheet PDF?
The MAX232ECPWR datasheet is available from the Texas Instruments product documentation and from the linked datasheet archive. Use the manufacturer datasheet as the controlling document for pin assignments, recommended charge-pump capacitors, receiver thresholds, electrical limits, and ESD test conditions. The datasheet identifies the part as a 5V, 250kbps, 16-pin TSSOP dual RS-232 transceiver with IEC 61000-4-2 protection.
Where can I find the MAX232ECPWR pinout?
The MAX232ECPWR pinout is shown in the pin-configuration and pin-description sections of the Texas Instruments manufacturer datasheet. Use that table when assigning the supply pins, driver inputs and outputs, receiver inputs and outputs, charge-pump terminals, and exposed or functional package pins. The component is a 16-pin TSSOP, so the complete physical pin list should contain 16 numbered positions.
Is MAX232ECPWR suitable for industrial RS-232 communication?
The MAX232ECPWR is suitable for short-distance industrial RS-232 links that use a 5V interface and need up to 250kbps signaling. Its dual-driver, dual-receiver arrangement supports bidirectional point-to-point communication, while IEC 61000-4-2 protection helps manage electrostatic discharge at connector-adjacent circuits. The manufacturer datasheet should also be checked against the system temperature range and required isolation practices.
What power supply does MAX232ECPWR require?
The MAX232ECPWR requires a single 4.5V to 5.5V power supply, with 5V as the nominal operating voltage. According to the Texas Instruments manufacturer datasheet, the integrated capacitive voltage generator produces the bipolar voltage levels required for RS-232 from this supply. Correct charge-pump capacitor selection and placement are essential because the generated signal amplitude depends on that network.
What RS-232 data rate does MAX232ECPWR support?
The MAX232ECPWR supports RS-232 signaling up to 250kbps. This rating describes the transceiver's maximum supported line rate, not a guaranteed end-to-end distance: cable length, capacitance, grounding, connector quality, and the attached equipment can reduce practical throughput. The Texas Instruments manufacturer datasheet lists the device as a 5V, 250kbps dual-channel RS-232 transceiver.
What can replace MAX232ECPWR on the same PCB?
A replacement must use the same 16-pin TSSOP footprint and provide compatible supply, driver, receiver, and charge-pump connections. MAX232E-family TSSOP devices can be considered when their pin assignment and electrical limits match, while TRS232EIPWR is a cross-brand option documented in the cross-reference results. Confirm pin compatibility, operating temperature, ESD rating, and charge-pump capacitor values against both device datasheets before substitution.
Can MAX232EIPWR replace MAX232ECPWR?
MAX232EIPWR can serve as a candidate replacement for MAX232ECPWR because both are MAX232E-family RS-232 transceivers offered in a 16-pin TSSOP configuration. The electrical function, 5V supply, dual-channel arrangement, and 250kbps class are closely aligned. Final approval should follow a datasheet comparison of pin functions, absolute maximum ratings, receiver thresholds, ESD performance, and capacitor requirements.
Is MAX3232ECPW a drop-in alternative to MAX232ECPWR?
MAX3232ECPW is a same-manufacturer, 16-pin TSSOP RS-232 transceiver that can be evaluated as a drop-in alternative when its pinout and required external capacitors match the MAX232ECPWR layout. Both families provide two drivers and two receivers from a 5V supply. Review the manufacturer datasheets for capacitance values, electrical limits, and any lead or temperature-grade differences before approving the replacement.
MAX232ECPWR vs MAX232EIPWR: which is better for a new design?
MAX232ECPWR and MAX232EIPWR are closely related 16-pin TSSOP RS-232 transceivers, so the better choice depends on ordering suffix, temperature grade, lifecycle, and confirmed pin compatibility rather than basic RS-232 function. Both use a 5V supply and provide two drivers and two receivers. Compare their ordering tables and electrical specifications to confirm that the selected suffix meets the product's environmental requirements.
MAX232ECPWR vs TRS232EIPWR: which is better for a protected interface?
MAX232ECPWR is the safer default when the system specifically requires the documented IEC 61000-4-2 protection level and exact Texas Instruments source. TRS232EIPWR may be attractive as a second-source 16-pin TSSOP option, but it should be selected only after its datasheet confirms equivalent pinout, 5V operation, 250kbps-class performance, and required charge-pump capacitors. ESD testing and qualification requirements must match the application.
Where to buy MAX232ECPWR online?
Use the Request a Quote form on this page to request the MAX232ECPWR and current commercial terms. The form is the appropriate route for checking availability, order quantities, and lead time without relying on stale catalog records. For technical qualification, request the exact ordering suffix shown on the component label or BOM, because package, temperature, and reel or tube choices can differ within the MAX232E family.
What is the price of MAX232ECPWR?
The current MAX232ECPWR price should be requested through the Request a Quote form on this page. A quote response should identify the exact 16-pin TSSOP ordering suffix, quantity, delivery packaging, and expected lead time. Because commercial availability and pricing can vary with quantity and inventory, use the form rather than relying on an archived unit-price reference when preparing a production BOM.
What is the lead time and stock status for MAX232ECPWR?
Current stock and lead-time status for MAX232ECPWR should be confirmed through the Request a Quote form on this page. Include the required quantity, target delivery date, and intended reel or tube packaging in the request. The manufacturer listing identifies MAX232ECPWR as an on-order device, but that designation alone does not establish a current shipment quantity or an order lead time.

엔지니어링 참조 데이터: MAX232ECPWR — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose MAX232ECPWR when the design needs a compact 16-pin TSSOP RS-232 transceiver with two drivers, two receivers, operation from 4.5V to 5.5V, a 250kbps data rate, and documented IEC 61000-4-2 protection. MAX232EIPWR is a close same-family option for second-source evaluation, but its ordering suffix, temperature grade, and pin details should be checked against the target design. MAX3232ECPW and MAX3232EIPWR may be preferable when the broader MAX3232 family aligns with existing component standardization, provided the required charge-pump capacitors and pin functions match. TRS232EIPWR is a cross-brand candidate for a protected industrial interface, but it should be selected only after its datasheet confirms equivalent pinout, electrical limits, ESD performance, and external capacitor requirements. For any substitution, verify the complete 16-pin footprint, supply decoupling, charge-pump network, operating temperature, and cable-side protection rather than relying only on the RS-232 and package descriptions.

대체품과의 비교

파라미터 이 제품 MAX232EIPWR MAX3232ECPW MAX3232EIPWR MAX232AEEPE TRS232EIPWR
Package 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP candidate 16-pin TSSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Product Type Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver
Number of Drivers 2 2 2 2 2 2
Number of Receivers 2 2 2 2 2 2
Nominal Supply Voltage 5V 5V 5V 5V 5V 5V
Maximum Data Rate 250kbps 250kbps 250kbps 250kbps 250kbps 250kbps

주요 차별점

  • Documented ESD protection in a compact dual-channel interface (vs TRS232EIPWR)
  • High data rate for a single-supply RS-232 transceiver (vs MAX232EIPWR)
  • Direct same-footprint sourcing family (vs MAX3232ECPW)

설계 노트

Place the charge-pump capacitors and supply-decoupling capacitor close to their specified pins, keeping the high-current charge-pump loop compact. The MAX232ECPWR generates bipolar RS-232 voltage from its 5V supply through switched-capacitor action, so long capacitor traces can increase switching noise and reduce available voltage margin. Follow the manufacturer datasheet capacitor values and component tolerances rather than substituting generic capacitors solely by capacitance rating.

Do not treat the 250kbps rating as a guaranteed communication distance. RS-232 cable capacitance, driver loading, connector construction, grounding, and common-mode noise can reduce practical reliability at higher rates. Test the complete cable and equipment combination under worst-case noise conditions, and avoid relying on software flow control as a substitute for correctly routed handshake signals.

Keep connector-side RS-232 driver and receiver traces physically separated from sensitive analog or high-speed digital nets, and provide a continuous ground reference adjacent to the interface route. Although the device includes IEC 61000-4-2 protection, the protection network is not a substitute for external surge protection where cables extend beyond the enclosure or encounter larger industrial transients.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

IEC 61000-4-2 protection is documented for the device. Other environmental and material-compliance claims were not established from the available product information and are therefore marked unknown.

관련 검색

MAX232ECPWR datasheet MAX232ECPWR pinout MAX232ECPWR datasheet pdf MAX232ECPWR equivalent MAX232ECPWR replacement MAX232ECPWR cross reference MAX232ECPWR vs MAX232EIPWR MAX232ECPWR TSSOP-16 footprint MAX232ECPWR application circuit MAX232ECPWR price MAX232ECPWR stock Texas Instruments MAX232ECPWR

관련 부품 & 용어

Texas Instruments MAX232ECPWR MAX232EIPWR MAX3232ECPW MAX3232EIPWR MAX232AEEPE TRS232EIPWR RS-232 transceiver dual driver dual receiver interface transceiver IC serial communication TIA/EIA-232-F TTL logic CMOS logic charge-pump voltage generator 250kbps 4.5V to 5.5V IEC 61000-4-2 electrostatic-discharge protection 16-pin TSSOP TSSOP package family surface mount industrial control data acquisition
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기