Texas Instruments

MAX3232CPWRG4 - 250 kbps Dual RS-232 Transceiver, 3-5.5 V, 16-TSSOP | Texas Instruments

부품 번호: MAX3232CPWRG4 ✓ 활성
3 V to 5.5 V Vdss 16-pin TSSOP (PW) Package
MOQ: 1 |

MAX3232CPWRG4 개요

Texas Instruments MAX3232CPWRG4 is a dual-channel RS-232 line driver/receiver (transceiver) integrated circuit containing two line drivers and two line receivers, a dual charge-pump circuit with plus or minus 15 kV ESD protection, a 3 V to 5.5 V single supply, and a maximum data rate of 250 kbps, all in a 16-pin TSSOP (PW) package.

An RS-232 transceiver is the interface bridge between a modern CMOS/TTL microcontroller or host UART and the legacy plus or minus 5 V to plus or minus 15 V signalling world of the RS-232 standard. In the knowledge hierarchy it sits as RS-232 transceiver, then line driver and line receiver, then interface IC, then integrated circuit. The MAX3232 is a classic multi-channel RS-232 interface IC used wherever a system must talk to a serial port, console, or legacy peripheral over a cable.

Key features of the MAX3232 device include the on-chip dual charge-pump circuit that generates the positive and negative RS-232 voltage levels from a single 3 V to 5.5 V supply, plus or minus 15 kV ESD protection on the serial-port connection terminals including ground, and compliance with the requirements of TIA/EIA-232-F. Because both the charge pump and the level translation are integrated, no external negative rail or level shifter is required in the design.

Architecturally the device separates transmit and receive pins cleanly, with two dedicated driver outputs and two dedicated receiver inputs plus the enable pins for each channel, so each direction can be shut down independently to reduce supply current when the port is idle. The charge-pump section requires four external flying capacitors connected to the C1+, C1-, C2+ and C2- pins, which the manufacturer shows in the typical application circuit of the MAX3232 datasheet.

Typical applications include RS-232 console and debug ports on industrial equipment, point-of-sale terminals, serial bridges and protocol converters, test and measurement instrument front panels, and legacy DB9 or RJ45 serial connections to host computers and microcontrollers. The 16-pin TSSOP footprint keeps the design compact and is the standard footprint for this family in surface-mount production.

When laying out a board, keep the four charge-pump capacitors physically close to their respective pins and route the RS-232 connector side of the circuit away from sensitive analog or high-speed digital traces, since the driver outputs are high-voltage, high-slew-rate signals relative to the logic side of the board.

This page consolidates manufacturer specifications, a drop-in alternative matrix, comparison parameters and practical layout guidance for engineers who need to source, qualify or replace the MAX3232CPWRG4 without re-laying-out their RS-232 interface board.

드롭인 대체품: MAX3232CPWRG4 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: MAX3232CPWRG4 (동일 폼 팩터 및 풋프린트) — 차이점: Transceiver Configuration, Maximum Data Rate, Package, ESD Protection, Interface Standard.

Texas Instruments
Transceiver Configuration: 2/2 full-duplex
Maximum Data Rate: 250 kbit/s
Package: 16-pin TSSOP
비교 대상: MAX3232CPWRG4 →
MaxLinear
Transceiver Configuration: 2 transmitter and 2 receiver channels
Package: 16-pin TSSOP
ESD Protection: 15 kV

MAX3232EIPWRQ1

✅ 드롭인
Texas Instruments
📦 16-TSSOP (PW)
2 · 2 · 2/2 full-duplex · 3 V to 5.5 V · 250 kbit/s · TIA/EIA-232-F · ITU V.28 · ±15 kV IEC, pin-to-pin

가격 문의

데이터시트 보기 →

TRS3232ECPWR

✅ 드롭인
📦 16-TSSOP (PW)
Same 16-TSSOP footprint and 3-5.5 V supply with 250 kbps rate; TRS3232E adds auto-shutdown and enhanced ESD features, channel count and charge-pump pinout unchanged

📋 참조 대체품 (카탈로그에 없음)

MAX3232ECPWR

✅ 드롭인
Texas Instruments
📦 16-TSSOP (PW)
Dual RS-232 line transceiver · 3 V to 5.5 V · 2 channels · 2 channels · 250 kbit/s · 30 V/µs · ±15 kV · TIA/EIA-232-F

가격 문의

데이터시트 보기 →

MAX3232IPWR

✅ 드롭인 ⚠️ 사양 미검증
Texas Instruments
📦 16-TSSOP (PW)
Dual RS-232 line driver and receiver · 2 channels · 2 channels · 3V to 5.5V · 250kbit/s · ±15kV · 5V logic · 0.1µF

가격 문의

데이터시트 보기 →

SP3232EBCY-L/TR

✅ 드롭인
MaxLinear
📦 16-TSSOP (PW)
2/2 RS-232 transceiver · 2 transmitter and 2 receiver channels · Full RS-232 · 250 kbps · 3 V to 5.5 V · 0°C to +70°C · 0.1 µF in 3.3 V operation · 15 kV

가격 문의

데이터시트 보기 →

MAX3232CPWRG4 사양

Product Type RS-232 line driver/receiver (transceiver) IC
Number of Line Drivers 2
Number of Line Receivers 2
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
ESD Protection (Terminal to Terminal) +/-15 kV
Standard Compliance TIA/EIA-232-F
Charge Pump Dual on-chip charge-pump circuit
External Charge-Pump Capacitors 4 (C1+, C1-, C2+, C2-)
패키지 16-pin TSSOP (PW)
실장 유형 Surface Mount
Logic Levels (Driver Input / Receiver Output) CMOS/TTL compatible
Transceiver Configuration 2/2 (two drivers, two receivers)
RoHS 상태 Compliant (G4 suffix denotes lead-free green package)

MAX3232CPWRG4 핀 구성

TSSOP-16 Package Pinout Diagram TSSOP-16 4.4x5mm, P0.65mm, JEDEC MO-153. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 TSSOP-16
핀 1 C1+ — Charge-pump flying capacitor positive terminal
핀 2 V+ — Charge-pump output supply (positive RS-232 rail node)
핀 3 C1- — Charge-pump flying capacitor negative terminal
핀 4 C2+ — Charge-pump flying capacitor positive terminal
핀 5 C2- — Charge-pump flying capacitor negative terminal
핀 6 V- — Charge-pump output supply (negative RS-232 rail node)
핀 7 R1OUT — Receiver 1 output (logic level)
핀 8 R1IN — Receiver 1 input (RS-232 level)
핀 9 R2OUT — Receiver 2 output (logic level)
핀 10 R2IN — Receiver 2 input (RS-232 level)
핀 11 IN2 — Driver 2 input (logic level)
핀 12 T2IN — Driver 2 data input (logic level)
핀 13 T1IN — Driver 1 data input (logic level)
핀 14 T2OUT — Driver 2 output (RS-232 level)
핀 15 T1OUT — Driver 1 output (RS-232 level)
핀 16 GND — Ground

일반적인 애플리케이션

MAX3232CPWRG4 적합 용도: 6 애플리케이션s: Industrial Console and Debug Serial Port, Point-of-Sale Terminal and Peripheral Interface, Serial Bridge and Protocol Converter, Test and Measurement Instrument Front Panel, Data Acquisition and Sensor Gateway Node, Legacy Computer and Peripheral Retrofit.

🏭

Industrial Console and Debug Serial Port

The MAX3232CPWRG4 fits console ports on industrial controllers, PLCs and test equipment because it delivers two RS-232 channels with a 250 kbps data rate from a single 3 V to 5.5 V rail, matching the supply of most modern embedded processors. A host UART on 3.3 V or 5 V connects directly to the CMOS-compatible driver inputs, while the receiver outputs translate the plus or minus RS-232 levels back to logic levels. The plus or minus 15 kV terminal-to-terminal ESD protection on the connector-side pins is the key benefit for cabinet-mounted equipment where the console cable is frequently plugged and unplugged by service technicians, adding a ruggedness layer that a bare UART pin cannot provide.

🖥️

Point-of-Sale Terminal and Peripheral Interface

Point-of-sale terminals and receipt printers still rely on RS-232 for cash drawer, scale and printer signalling, and the MAX3232CPWRG4 provides the bipolar voltage levels those devices expect from a single supply. Two drivers and two receivers per package allow a single chip to handle both the outbound command channel and the inbound acknowledgement channel to the printer, which halves the interface count compared with single-channel parts. The 250 kbps ceiling is comfortably above the few kbit/s rates used by legacy POS peripherals, while the integrated charge pump removes the need for a separate negative rail in space-constrained terminal housings.

🌐

Serial Bridge and Protocol Converter

Protocol converters that bridge RS-232 to RS-485 or to a USB host benefit from the MAX3232CPWRG4 because its two channels can terminate a full-duplex RS-232 link with one package, leaving board area for the conversion side. The 250 kbps maximum data rate suits supervisory links, configuration ports and firmware update channels rather than high-speed data streaming. The 16-pin TSSOP package keeps the converter board compact, and the plus or minus 15 kV ESD rating protects the exposed connector pins that are typically routed to the enclosure edge in field-installed equipment.

📺

Test and Measurement Instrument Front Panel

Laboratory and field-test instruments expose RS-232 ports for SCPI-style command and control, and the MAX3232CPWRG4 suits this role because the TIA/EIA-232-F compliant drivers and receivers deliver reliable signalling over multi-metre shielded cables. Its 3 V to 5.5 V operating range allows it to run from the same rail as the instrument's digital control section, minimising power tree complexity. For bench equipment that is repeatedly connected to customer laptops, the terminal-to-terminal ESD protection on the driver and receiver pins reduces the risk of instrument damage from electrostatic events during routine reconfiguration of the test setup.

🧩

Data Acquisition and Sensor Gateway Node

Remote data acquisition nodes and sensor gateways that must report to a host computer over RS-232 use the MAX3232CPWRG4 as the physical layer interface to the on-board microcontroller UART. The low single-supply requirement is valuable in gateway designs powered from small isolated DC-DC modules, since no additional negative rail is needed. With 250 kbps of headroom the link is more than adequate for periodic telemetry frames, and the integrated charge pump plus on-board level translation shortens the design cycle by removing discrete transistor inverter stages that older RS-232 designs required.

🔧

Legacy Computer and Peripheral Retrofit

Retrofit and adapter designs that let modern USB or embedded boards talk to legacy DB9 RS-232 peripherals are a classic use for the MAX3232CPWRG4 because the interface is a single IC plus four charge-pump capacitors and an optional protection network. The 16-pin TSSOP package is easy to place on a small adapter PCB, and the plus or minus 15 kV ESD rating is valuable on adapter boards that plug directly into an unshielded legacy port. Designers can reuse existing cable and connector wiring because the driver and receiver pin functions match the original RS-232 channel arrangement of the family.

What is the MAX3232CPWRG4?
The MAX3232CPWRG4 is a Texas Instruments dual RS-232 transceiver IC containing two line drivers, two line receivers and a dual charge-pump circuit with plus or minus 15 kV ESD protection, supplied in a 16-pin TSSOP package. According to the Texas Instruments MAX3232 datasheet, it provides the electrical interface between an asynchronous communication controller and a serial-port connector, and it operates from a single 3 V to 5.5 V supply while meeting the requirements of TIA/EIA-232-F.
What is the operating voltage range of MAX3232CPWRG4?
The MAX3232CPWRG4 operates from 3 V to 5.5 V single supply. This matches the supply rails commonly found in 3.3 V and 5 V embedded systems, so the device can be powered directly from the same rail as the host microcontroller UART. According to the Texas Instruments MAX3232 datasheet, the on-chip dual charge-pump circuit derives the positive and negative RS-232 signalling levels internally, so no external negative supply or level-shifting stage is needed.
What is the maximum data rate of MAX3232CPWRG4?
The MAX3232CPWRG4 supports data rates up to 250 kbps. That ceiling comfortably covers standard PC serial ports, industrial consoles, instrument control links and most legacy peripheral buses, while remaining well within the capability of the TIA/EIA-232-F compliant driver and receiver channels described in the Texas Instruments MAX3232 datasheet.
What ESD protection does the MAX3232CPWRG4 provide?
The MAX3232CPWRG4 provides plus or minus 15 kV ESD protection terminal to terminal, covering the serial-port connection terminals including ground. According to the Texas Instruments MAX3232 datasheet, this protection is applied across the driver outputs and receiver inputs, which is important for cable-connected ports that are exposed to hot-plug events, electrostatic discharge from operators and long unshielded runs in industrial cabinets.
Where can I download the MAX3232CPWRG4 datasheet PDF?
The manufacturer datasheet is available from the Texas Instruments product pages for the MAX3232 family, with the ordering information for the MAX3232CPWRG4 orderable code listed on the MAX3232 part-details page. Search the part number on this page under datasheets to open the PDF. The datasheet contains the pin configuration, the typical application circuit including the four charge-pump capacitors, the absolute maximum ratings and the electrical characteristics tables.
Where can I find the MAX3232CPWRG4 pinout?
The MAX3232CPWRG4 pinout is documented in the Texas Instruments MAX3232 datasheet, which lists the 16-pin TSSOP (PW) pin configuration covering the charge-pump pins C1+, C1-, C2+, C2-, the V+ and V- supply pins, ground, the two driver inputs and outputs, and the two receiver inputs and outputs. The pin description table in that document is the authoritative source when assigning PCB tracks and net names.
What is the best drop-in replacement for MAX3232CPWRG4?
The best drop-in replacement for the MAX3232CPWRG4 is the MAX3232EIPWR from Texas Instruments, a 16-pin TSSOP part that the manufacturer identifies as an improved direct drop-in replacement for the MAX3232 with the same 3 V to 5.5 V supply, 250 kbps rate and identical footprint. For an improved version with lower supply current and enhanced driver/receiver performance, TI also recommends the MAX3232E family for new designs.
Is the MAX3232EIPWR the same as the MAX3232CPWRG4?
The MAX3232EIPWR is not an identical part but it is a pin-compatible, same-footprint successor in the same 16-pin TSSOP family. According to the Texas Instruments product comparison, the MAX3232E is an improved direct drop-in replacement for the MAX3232 with identical 3 V to 5.5 V operation, 250 kbps data rate and RS-232 driver/receiver channel counts, which makes PCB re-use straightforward.
MAX3232CPWRG4 vs MAX3232EIPWR - which is better for a new design?
For a new design the MAX3232EIPWR is the better choice, because Texas Instruments explicitly recommends the MAX3232E in new designs and describes it as an improved direct drop-in replacement for the MAX3232. The MAX3232CPWRG4 remains the right part for maintaining an existing design, replicating an approved BOM, or sourcing an identical legacy orderable code with the plus or minus 15 kV ESD rating already qualified in your product.
When should I choose the MAX3232CPWRG4 instead of the MAX3232EIPWR?
Choose the MAX3232CPWRG4 when you need to preserve an exact approved BOM, match a customer-specified part number, or keep a proven design frozen, since the MAX3232CPWRG4 is a listed orderable code with a 16-pin TSSOP package, 3 V to 5.5 V supply and 250 kbps rate. Choose the MAX3232EIPWR for new boards where the lower supply current and improved driver and receiver characteristics of the MAX3232E family are valuable.
Is the MAX3232CPWRG4 suitable for industrial equipment?
The MAX3232CPWRG4 is suitable for industrial equipment because it offers a wide 3 V to 5.5 V supply range, a 250 kbps data rate and plus or minus 15 kV terminal-to-terminal ESD protection on the serial-port connection terminals including ground. According to the Texas Instruments MAX3232 datasheet, the device meets TIA/EIA-232-F requirements, which is the standard that defines the signalling used by industrial serial consoles and legacy peripherals.
Where can I buy the MAX3232CPWRG4 online?
Use the Request a Quote form on this page to buy the MAX3232CPWRG4 and to have the exact orderable code MAX3232CPWRG4 confirmed against your bill of materials, including quantity breaks, packaging options and lead time. The part is a standard Texas Instruments 16-pin TSSOP orderable code, so it is normally available in tube or tape-and-reel quantities, and a formal quote will confirm current allocation and delivery schedule.
What is the price of the MAX3232CPWRG4?
Pricing for the MAX3232CPWRG4 is quote-driven and changes with volume, packaging and market conditions, so request a quote through the Request a Quote form on this page for current unit pricing and quantity breaks. The form accepts the full part number MAX3232CPWRG4 and your target annual and prototype quantities, which allows the supply team to return a binding price rather than a static figure.
What is the lead time for the MAX3232CPWRG4?
Current lead time for the MAX3232CPWRG4 is confirmed on the Request a Quote form on this page, which returns an availability statement tied to the requested quantity and packaging. The part is an active Texas Instruments orderable code in the widely used 16-pin TSSOP package, so standard lead times are generally normal rather than allocation-constrained, but only a quote can confirm the current schedule for your build.
Is the MAX3232CPWRG4 in stock?
Stock levels for the MAX3232CPWRG4 change daily, and the authoritative position is returned with the quote generated from the Request a Quote form on this page. Because the device is an active standard part with broad industrial and commercial use, most quantities can be supplied from regular distribution channels, and requesting a quote will confirm in-stock quantity, factory lead time and any scheduled shipment windows.
What can replace the MAX3232CPWRG4?
The MAX3232CPWRG4 can be replaced pin-to-pin by the MAX3232EIPWR or the MAX3232ECPWR from Texas Instruments, by the TRS3232ECPWR from the same manufacturer, and by the SP3232EBCY-L/TR from MaxLinear, which is published as a functionally equivalent, pin-compatible substitute. Any replacement must keep the 16-pin TSSOP footprint, the 3 V to 5.5 V supply, the 250 kbps rate and the four charge-pump capacitor connections.
What are the key specifications of the MAX3232CPWRG4 that engineers should know?
The key specifications of the MAX3232CPWRG4 are: two line drivers and two line receivers, a 3 V to 5.5 V single supply, a maximum data rate of 250 kbps, plus or minus 15 kV ESD protection terminal to terminal including ground, TIA/EIA-232-F compliance, an integrated dual charge-pump circuit with four external capacitor connections, and a 16-pin TSSOP (PW) surface-mount package. These figures are taken from the Texas Instruments MAX3232 datasheet and product page.
What is the best MaxLinear equivalent for the MAX3232CPWRG4?
The MaxLinear SP3232EBCY-L/TR is the published functionally equivalent and pin-compatible substitute for the Texas Instruments MAX3232CPWR, according to the MaxLinear cross-reference listing. It is used when a second source is needed for the same RS-232 interface function. Because the body outline and lead pitch must match your PCB land pattern, confirm the mechanical drawing for the exact ordering suffix before releasing a design.

엔지니어링 참조 데이터: MAX3232CPWRG4 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

The MAX3232CPWRG4 is the right choice when you are maintaining an existing design, matching an approved BOM, or need a part that has been qualified in a shipped product; it delivers two RS-232 channels, 3 V to 5.5 V single-supply operation, 250 kbps data rate and plus or minus 15 kV ESD protection in the standard 16-pin TSSOP package. For new designs, follow the manufacturer guidance and use the MAX3232EIPWR or MAX3232ECPWR, which keep the same footprint and pin functions while lowering supply current and improving driver and receiver performance. Choose the TRS3232ECPWR when auto-shutdown and stronger ESD performance matter, for example in battery-backed or externally exposed equipment. Reach for the MaxLinear SP3232EBCY-L/TR when a second source is needed for continuity of supply, after checking the mechanical drawing against your land pattern. In every case, verify the charge-pump capacitor values, the enable-pin polarity for your system and the connector-side protection network against the datasheet of the exact part you select.

대체품과의 비교

파라미터 이 제품 MAX3232EIPWR TRS3232ECPWR MAX3232ECPWR SP3232EBCY-L/TR
Package 16-TSSOP (PW) 16-TSSOP (PW) - same 16-TSSOP (PW) - same 16-TSSOP (PW) - same 16-pin narrow-body - verify lead pitch against 0.65 mm TSSOP land pattern
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments MaxLinear
Number of Drivers / Receivers 2 / 2 2 / 2 2 / 2 2 / 2 2 / 2
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V
Manufacturer Recommendation Original MAX3232 grade, active orderable code Recommended by the manufacturer for new designs Newer enhanced family member Improved direct drop-in replacement for MAX3232 Second-source functional equivalent

주요 차별점

  • Original MAX3232 orderable code with the full 16-pin TSSOP footprint and 2/2 channel configuration (vs MAX3232EIPWR)
  • Lower supply current and improved driver and receiver behaviour in the MAX3232E generation (vs MAX3232ECPWR)
  • Second-source availability without redesign (vs SP3232EBCY-L/TR)
  • Auto-shutdown and enhanced ESD options available in the same footprint (vs TRS3232ECPWR)

설계 노트

Place the four charge-pump capacitors directly across the C1+, C1-, C2+ and C2- pins with the shortest possible loop area. These switching nodes move at high frequency, so long traces act as antennas and couple switching noise into adjacent logic nets. Keep the V+ and V- connections to the capacitors short as well, and place the input and output bulk decoupling close to the supply pins to keep the charge-pump return current inside the device ground loop.

Do not route RS-232 driver outputs (T1OUT, T2OUT) alongside receiver inputs or logic-side signals on the same layer. The driver outputs swing to plus or minus RS-232 voltage levels with fast edge rates, and coupling from these nets into the receiver inputs or the host UART can produce corrupted characters and intermittent framing errors. Use a keep-out band and, where practical, route the connector side of the board on a separate layer or behind a ground guard.

For cable-attached ports, add a series protection network at the connector: a low-capacitance TVS diode array per line for surge and residual ESD events, plus a common-mode choke or small ferrite if the cable run is long. The integrated plus or minus 15 kV ESD protection is a last line of defence for the device itself and should be combined with external protection so that the connector pins, not the IC pins, absorb the bulk of the discharge energy.

The charge-pump section draws pulsed current from the supply while generating the bipolar rails, so the input supply must be able to source the charge-pump current spikes without excessive droop. Place a local ceramic capacitor plus a bulk electrolytic near the device and keep the ground return path short to the supply ground plane. If the interface shares a rail with switching converters, isolate the supply with a small ferrite bead or dedicated LDO to keep ripple off the receiver thresholds.

규정 준수 정보

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
무연
Yes
무할로겐
Unknown
분쟁 광물
Unknown

The G4 suffix denotes the lead-free, RoHS-compliant green package variant from Texas Instruments. The device is a commercial and industrial interface IC and is not AEC-Q100 qualified. REACH, halogen-free and conflict-minerals declarations were not stated on the product pages and should be confirmed with the manufacturer before export-controlled or regulated use.

데이터 검증일: 2026-11-09 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

MAX3232CPWRG4 MAX3232CPWRG4 datasheet MAX3232CPWRG4 datasheet pdf MAX3232CPWRG4 pinout MAX3232CPWRG4 equivalent MAX3232CPWRG4 replacement MAX3232CPWRG4 vs MAX3232EIPWR MAX3232CPWRG4 price MAX3232CPWRG4 stock Texas Instruments MAX3232CPWRG4 16-TSSOP RS-232 transceiver 250kbps MAX3232 CPW TSSOP-16 pinout dual RS-232 line driver receiver 3.3V 5V RS-232 transceiver industrial console port what can replace MAX3232CPWRG4

관련 부품 & 용어

Texas Instruments MAX3232CPWRG4 MAX3232 MAX3232EIPWR MAX3232ECPWR TRS3232ECPWR MAX3232IPWR SP3232EBCY-L/TR MaxLinear RS-232 transceiver line driver line receiver interface IC charge pump TIA/EIA-232-F ESD protection 250 kbps data rate 3 V to 5.5 V supply 16-pin TSSOP surface mount RoHS lead-free green package industrial serial port point-of-sale terminal charge-pump flying capacitor
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기