Analog Devices

MAX3232ECUP+T - 1Mbps True RS-232 Transceiver | Analog Devices

부품 번호: MAX3232ECUP+T ✓ 활성
3.0V to 5.5V Vdss 10nA minimum Id 20-pin TSSOP Package
MOQ: 1 |

MAX3232ECUP+T 개요

Analog Devices MAX3232ECUP+T is a dual-driver, dual-receiver true RS-232 transceiver operating from a 3.0V to 5.5V single supply. It supports data rates up to 1Mbps and provides ±15kV ESD protection on the serial interface pins. The device is packaged in a 20-pin TSSOP package and is intended for industrial, instrumentation, communications, and embedded equipment using the EIA/TIA-232 serial interface.

An RS-232 transceiver is an interface IC that translates logic-level TTL or CMOS signals into balanced, single-ended RS-232 voltage levels and converts incoming RS-232 signals back into logic levels. The MAX3232 combines two line drivers, two line receivers, and an onboard dual charge-pump circuit. This charge-pump arrangement generates the positive and negative voltages required for compliant RS-232 transmission without a separate negative supply rail.

Key features include true RS-232 operation, 3.0V to 5.5V supply compatibility, throughput up to 1Mbps, and ±15kV ESD protection. The receiver can remain active while the transmitter is disabled, supporting shared-bus and locally managed systems. Low-power operation and a supply current as low as 10nA make the device suitable for energy-conscious ports that spend substantial time idle.

The MAX3232 uses external charge-pump capacitors to establish the RS-232 voltage levels. Its integrated architecture reduces the number of external components compared with older discrete charge-pump implementations, while the single-supply operation simplifies power planning in systems that also contain 3.3V or 5V digital logic. Interface protection is particularly important where a serial cable connects externally accessible equipment to a control board.

Typical applications include RS-232 ports on industrial controllers, test and measurement instruments, point-of-sale equipment, barcode scanners, and embedded systems. The device can also translate between a host UART and an RS-232 bus, including systems that require hardware handshaking through the request-to-send and clear-to-send lines.

Design the serial connector, protection network, charge-pump capacitors, and ground return as one signal-integrity system. Keep charge-pump capacitor connections short, provide a solid ground plane, and use an interface connector with suitable surge and ESD protection when the cable is exposed to user-accessible environments.

This page combines manufacturer specifications, sourcing guidance, verified drop-in alternatives, comparison parameters, and practical PCB considerations to support faster component selection and robust RS-232 interface implementation.

드롭인 대체품: MAX3232ECUP+T — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: MAX3232ECUP+T (동일 폼 팩터 및 풋프린트) — 차이점: Maximum Data Rate, Supply Voltage Range, Product Type, Package, ESD Protection.

Texas Instruments
Supply Voltage Range: 3 V to 5.5 V
Product Type: Dual RS-232 line transceiver
Package: 16-pin TSSOP
비교 대상: MAX3232ECUP+T →
Analog Devices
Maximum Data Rate: 1 Mbps
Supply Voltage Range: 3.0 V to 5.5 V
ESD Protection: ±15 kV
비교 대상: MAX3232ECUP+T →
Analog Devices
Maximum Data Rate: 1 Mbps
Supply Voltage Range: 3.0 V to 5.5 V
Product Type: 2/2 RS-232 transceiver
비교 대상: MAX3232ECUP+T →
Texas Instruments
Maximum Data Rate: 250 kbps
Supply Voltage Range: 3 V to 5.5 V
Package: 16-pin TSSOP
비교 대상: MAX3232ECUP+T →
Texas Instruments
Maximum Data Rate: 250 kbit/s
Supply Voltage Range: 3 V to 5.5 V
Package: 16-pin SOIC (DW), 5.30 mm body width
비교 대상: MAX3232ECUP+T →
Texas Instruments
Maximum Data Rate: 250kbit/s
Supply Voltage Range: 3V to 5.5V
Product Type: Dual RS-232 line driver and receiver
비교 대상: MAX3232ECUP+T →

MAX3232ECUP+

✅ 드롭인
Analog Devices
📦 20-pin TSSOP
True RS-232 transceiver · 2 transmitters and 2 receivers · 3.0 V to 5.5 V · 1 Mbps · ±15 kV · Down to 10 nA · 2 · 2

가격 문의

데이터시트 보기 →

MAX3232ECPWR

✅ 드롭인 ⚠️ 사양 미검증
Texas Instruments
📦 20-pin TSSOP
Dual RS-232 line transceiver · 3 V to 5.5 V · 2 channels · 2 channels · 250 kbit/s · 30 V/µs · ±15 kV · TIA/EIA-232-F

가격 문의

데이터시트 보기 →

MAX3232IPWR

✅ 드롭인 ⚠️ 사양 미검증
Texas Instruments
📦 20-pin TSSOP
Dual RS-232 line driver and receiver · 2 channels · 2 channels · 3V to 5.5V · 250kbit/s · ±15kV · 5V logic · 0.1µF

가격 문의

데이터시트 보기 →

MAX3232EIPW

✅ 드롭인 ⚠️ 사양 미검증
Texas Instruments
📦 20-pin TSSOP
Dual RS-232 line driver/receiver with dual charge pump · 2 channels · 2 channels · 3 V to 5.5 V · 250 kbps · ±15 kV IEC ESD, pin-to-pin · TIA/EIA-232-F · Full duplex

가격 문의

데이터시트 보기 →

MAX3232IDWR

✅ 드롭인 ⚠️ 사양 미검증
Texas Instruments
📦 20-pin TSSOP
RS-232 line driver/receiver transceiver · 2 · 2 · 3 V to 5.5 V · 250 kbit/s · 300 µA typical · ±15 kV · 4 x 0.1 µF

가격 문의

데이터시트 보기 →

MAX3232ECUP+T 사양

Product Type True RS-232 transceiver
Number of Drivers 2 drivers
Number of Receivers 2 receivers
Supply Voltage Range 3.0V to 5.5V
Maximum Data Rate 1Mbps
ESD Protection ±15kV
Low-Power Supply Current 10nA minimum
Charge-Pump Architecture Dual charge pump
Transceiver Configuration 2/2 full-duplex
패키지 20-pin TSSOP
실장 유형 Surface mount
ESD Protection Topology ±15kV on RS-232 pins
Power-Supply Architecture Single supply
Manufacturer Lifecycle Status Production
Automotive Qualification Not applicable to this interface-device application

MAX3232ECUP+T 20-pin tssop 핀 구성 가이드

MAX3232ECUP+T(20-pin tssop 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

MAX3232ECUP+T의 20-pin tssop 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MAX3232ECUP+T.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MAX3232ECUP+T 적합 용도: 6 애플리케이션s: Industrial Controller RS-232 Port, Test and Measurement Instrument, Point-of-Sale and Barcode Equipment, Embedded UART Serial Bridge, Networking and Communication Equipment, Low-Power Portable Serial Device.

🏭

Industrial Controller RS-232 Port

The MAX3232ECUP+T suits industrial controller and data-acquisition equipment that must expose a legacy RS-232 port while operating from a 3.0V to 5.5V system rail. Its two drivers and two receivers support full-duplex communication with request-to-send and clear-to-send handshaking, while operation up to 1Mbps provides ample throughput for configuration transfers and short diagnostic frames. The ±15kV ESD protection on the interface pins improves tolerance of cable-borne electrostatic discharge. Place the device close to the connector, connect its ground reference to the board ground, and consider additional surge protection when the cable extends beyond the enclosure.

🔧

Test and Measurement Instrument

The MAX3232ECUP+T is appropriate for test and measurement instruments that use RS-232 for legacy instrument control or service interfaces. A 1Mbps maximum data rate supports rapid command exchange, while the 3.0V to 5.5V operating range allows direct compatibility with common 3.3V and 5V logic systems. The dual charge-pump circuit eliminates the need for a separate negative rail, simplifying internal power distribution. Keep the interface trace short and provide a continuous return path to reduce susceptibility to common-mode voltage differences between the instrument and connected controller.

🖥️

Point-of-Sale and Barcode Equipment

The MAX3232ECUP+T can provide a reliable RS-232 connection in point-of-sale terminals, barcode scanners, and receipt-printer interfaces. Two transmit and two receive channels are sufficient for many legacy peripheral arrangements, and the single 3.0V to 5.5V supply reduces the power-system complexity of compact embedded equipment. Up-to-1Mbps operation helps avoid throughput bottlenecks during continuous transaction logging. Use a shielded cable where possible, maintain a low-impedance ground connection, and position external protection devices near the connector so surge current does not flow through sensitive logic traces.

🧩

Embedded UART Serial Bridge

The MAX3232ECUP+T bridges a host UART and an external RS-232 port in embedded controllers, service modules, and communication adapters. The 3.0V to 5.5V supply range accommodates both 3.3V and 5V microcontrollers, while the internal charge pump provides compliant positive and negative driver outputs. The dual-driver, dual-receiver arrangement supports full-duplex links and hardware flow control. Keep the charge-pump capacitor loops compact, provide solid decoupling at the supply pins, and route the connector-side interface away from clocks, switching regulators, and high-slew-rate digital signals.

🌐

Networking and Communication Equipment

The MAX3232ECUP+T is useful in network and communication equipment that retains an RS-232 management, console, or service interface. The combination of a 3.0V to 5.5V supply, operation up to 1Mbps, and ±15kV ESD protection supports robust links to legacy equipment. Its integrated charge-pump design reduces board area compared with a discrete driver arrangement, which is beneficial in compact network appliances. The RS-232 signal reference must still be treated as an electrically harsh interface: maintain a low-impedance ground return and validate the complete cable and enclosure arrangement.

📱

Low-Power Portable Serial Device

The MAX3232ECUP+T fits portable and battery-powered serial devices that use a 3.3V or 5V rail and must retain an RS-232 port. The MAX3232E family's supply current can fall to 10nA, allowing the interface to consume little power when the port is idle while still supporting active communication up to 1Mbps. The device's integrated dual charge pump avoids a negative rail and simplifies portable power design. Actual battery impact depends on how often the UART and transmitter are enabled, so pair the interface with an appropriate power-management strategy and disable unused driver channels when supported by the system design.

What is the MAX3232ECUP+T?
The MAX3232ECUP+T is a true RS-232 transceiver with two drivers and two receivers for full-duplex serial communication. Analog Devices lists the MAX3232 family as production devices, and the MAX3232E family operates from 3.0V to 5.5V at rates up to 1Mbps. Its integrated dual charge pump supplies the bipolar voltage levels required by true RS-232 without a separate negative power supply.
What is the operating voltage of MAX3232ECUP+T?
The MAX3232ECUP+T operates from a single 3.0V to 5.5V supply. According to the Analog Devices MAX3232E product page, this range allows the interface to share 3.3V or 5V system rails rather than requiring a dedicated RS-232 supply. The onboard charge-pump circuit generates the positive and negative signal levels needed by the RS-232 drivers.
What is the maximum data rate of MAX3232ECUP+T?
The MAX3232ECUP+T supports data rates up to 1Mbps according to the Analog Devices MAX3232E family documentation. This rate is suitable for instrument-control links, embedded serial ports, and other asynchronous RS-232 connections that require more throughput than a conventional low-speed serial port. Signal integrity still depends on cable length, termination strategy, grounding, and connector quality.
Does MAX3232ECUP+T provide ESD protection?
Yes. The MAX3232E family provides ±15kV ESD protection on the RS-232 interface pins, as stated by Analog Devices. This protection improves tolerance when the external serial port is connected through a cable exposed to electrostatic discharge. Additional connector-side protection may still be appropriate where the port faces severe industrial surge or lightning conditions.
Where can I download the MAX3232ECUP+T datasheet PDF?
The official MAX3232ECUP+T documentation is available through the Analog Devices MAX3232E product page and the MAX3232 family page. The MAX3232E page identifies a data sheet revision 13, while the broader MAX3232 page lists revision 10. Use the manufacturer document corresponding to the exact ordering code when assigning limits, pin functions, and application details.
Where can I find the MAX3232ECUP+T pinout?
The MAX3232ECUP+T pin assignment is documented in the manufacturer data sheet and the pin-description table on the Analog Devices MAX3232E product page. The distributor listing identifies a 20-pin TSSOP package, but it does not reproduce every terminal name. Use the package drawing and data-sheet pin table when assigning PCB nets rather than inferring connections from the interface functions alone.
What can replace the MAX3232ECUP+T?
The MAX3232ECUP+ is the closest identified drop-in option because it denotes the same MAX3232ECUP device configuration, while MAX3232EUP+ uses a different 16-pin TSSOP footprint and therefore requires PCB changes. A suitable replacement must use the same package and pin arrangement, support the same 3.0V to 5.5V supply range, and provide the required two-driver, two-receiver RS-232 function.
Is the MAX3232ECUP+T the same as MAX3232ECUP+?
The MAX3232ECUP+T and MAX3232ECUP+ identify the same MAX3232ECUP device with different orderable packaging or shipping designations. Their electrical role is the same: a 3.0V to 5.5V, two-driver, two-receiver true RS-232 transceiver rated for operation up to 1Mbps. Confirm the package marking and tape-and-reel orientation when converting the exact order code for assembly.
What is the best Analog Devices equivalent for MAX3232ECUP+T?
The MAX3232ECUP+ is the closest Analog Devices drop-in selection identified for MAX3232ECUP+T because it preserves the MAX3232ECUP device configuration and electrical ratings. The MAX3232EUP+ is also an Analog Devices RS-232 transceiver, but its 16-pin TSSOP package differs from the listed 20-pin package and prevents direct PCB substitution. Verify the exact footprint before approving a replacement.
When should I choose MAX3232ECUP+T instead of MAX3232EUP+?
Choose MAX3232ECUP+T when the PCB has a 20-pin TSSOP footprint and you need the MAX3232E family's 3.0V to 5.5V operation, ±15kV ESD protection, and up-to-1Mbps performance. Choose MAX3232EUP+ only when the board uses its 16-pin TSSOP footprint and the associated pin arrangement. The differing package sizes make this primarily a footprint-selection decision.
Is MAX3232ECUP+T suitable for an industrial RS-232 port?
The MAX3232ECUP+T is suitable for many industrial RS-232 interfaces because it supports a 3.0V to 5.5V supply, up to 1Mbps operation, and ±15kV ESD protection. For harsh industrial installations, add appropriate cable-side surge protection and confirm the temperature grade and isolation requirements of the complete system. The interface IC alone does not replace an isolation barrier.
How much power does the MAX3232ECUP+T consume?
The MAX3232E family can operate with supply current down to 10nA, as identified by Analog Devices, while the dual charge-pump circuit supplies the bipolar RS-232 levels from one external supply rail. Actual system consumption depends on supply voltage, data activity, and the selected operating mode. Review the data sheet's supply-current conditions against the UART activity pattern.
How does MAX3232ECUP+T compare with MAX3232EUP+?
Both devices belong to the low-power MAX3232E RS-232 transceiver family and support true RS-232 operation, but their package footprints differ. The MAX3232ECUP+T is listed in a 20-pin TSSOP package, while MAX3232EUP+ is associated with a 16-pin TSSOP package. They therefore differ by 4 package positions and are not directly interchangeable on an unchanged PCB.
What key specifications of MAX3232ECUP+T should engineers know?
The key specifications are a 3.0V to 5.5V single-supply range, two drivers, two receivers, operation up to 1Mbps, ±15kV ESD protection, and low-power operation down to 10nA. The Analog Devices MAX3232E page also identifies the family as production. These parameters determine supply compatibility, serial throughput, protection level, and suitability for idle-heavy embedded ports.
Where can I buy MAX3232ECUP+T and what is its lead time?
Use the Request a Quote form on this page to request MAX3232ECUP+T availability, current unit pricing, minimum order quantity, and lead time. The manufacturer lists the MAX3232 family as production, while individual inventory and delivery schedules can change by package and order quantity. The quote request provides the appropriate route for a current purchasing commitment.
Is MAX3232ECUP+T in stock?
Current stock for the exact MAX3232ECUP+T order code should be confirmed through the Request a Quote form on this page. A distributor listing indicates that the MAX3232ECUP family is available for ordering, but that does not establish a guaranteed quantity for the +T order code. Production status confirms ongoing family availability rather than a fixed warehouse balance.

엔지니어링 참조 데이터: MAX3232ECUP+T — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose MAX3232ECUP+T when the design requires a true RS-232 interface operating from 3.0V to 5.5V, a data rate up to 1Mbps, and ±15kV ESD protection on the serial pins. MAX3232ECUP+ is the closest ordering designation because it retains the same MAX3232ECUP configuration and 20-pin TSSOP footprint. MAX3232ECPWR is a practical same-family option when its exact data-rate and lifecycle details are confirmed. MAX3232IPWR, MAX3232EIPW, and MAX3232IDWR may suit lower-speed interfaces, but their maximum data-rate and shutdown characteristics differ and must be checked against the UART requirements. For a new PCB, compare operating speed, supply current, package dimensions, transceiver channel count, and required handshaking behavior before finalizing the ordering code.

대체품과의 비교

파라미터 이 제품 MAX3232ECUP+ MAX3232ECPWR MAX3232IPWR MAX3232EIPW MAX3232IDWR
Package 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Product Type True RS-232 transceiver True RS-232 transceiver True RS-232 transceiver RS-232 transceiver True RS-232 transceiver RS-232 transceiver
Supply Voltage Range 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V
Number of Drivers 2 drivers 2 drivers 2 drivers 2 drivers 2 drivers 2 drivers
Number of Receivers 2 receivers 2 receivers 2 receivers 2 receivers 2 receivers 2 receivers
Charge-Pump Architecture Dual charge pump Dual charge pump Dual charge pump Dual charge pump Dual charge pump Dual charge pump

주요 차별점

  • Supports higher serial throughput within the MAX3232E family (vs MAX3232IPWR)
  • Combines dual charge-pump operation with a 3.0V to 5.5V supply range (vs MAX3232EUP+)
  • Provides two drivers and two receivers for full-duplex links (vs MAX3232EIDWR)
  • Uses the same package arrangement as the identified MAX3232ECPWR option (vs MAX3232ECPWR)

설계 노트

Treat the RS-232 connector side as a high-voltage, high-current-return interface rather than a conventional logic signal path. Route the MAX3232ECUP+T close to the connector, keep charge-pump capacitor loops compact, and provide a continuous ground reference between the transceiver and connector. This reduces inductive voltage drops during driver transitions and improves common-mode behavior between connected equipment.

Use the manufacturer-recommended charge-pump capacitor values and place each capacitor directly across its designated pins. Do not substitute large leaded capacitors or add long traces between the capacitor and IC. The charge-pump nodes are high-energy switching nodes, and excessive loop area can increase radiated emissions and reduce transmission margin under cable or load stress.

Do not assume that ±15kV ESD protection removes the need for system-level surge protection. The internal ESD structure is designed for electrostatic events on the serial pins, while industrial cables may also expose the port to much larger surge energies. Add appropriately rated external protection where required, coordinate its capacitance with signal integrity, and confirm that the connector and enclosure provide a dependable ground path.

Decouple the MAX3232ECUP+T supply pins directly with a local high-frequency capacitor and place the device near its supply connection. Although the transceiver accepts 3.0V to 5.5V, the complete design must respect the limits of the UART, protection components, and connector circuitry. If unused drivers are disabled, verify the exact shutdown behavior and ensure their output states do not create an unsafe bus condition.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The manufacturer identifies the MAX3232 family as production. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations for the exact MAX3232ECUP+T order code were not present in the referenced materials.

데이터 검증일: 2026-11-18 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

MAX3232ECUP+T datasheet MAX3232ECUP+T pinout MAX3232ECUP+T datasheet pdf MAX3232ECUP+T equivalent MAX3232ECUP+T replacement MAX3232ECUP+T price MAX3232ECUP+T stock Analog Devices MAX3232ECUP+T MAX3232ECUP+T 20 pin TSSOP MAX3232ECUP+T 1Mbps RS-232 MAX3232ECUP+T vs MAX3232EUP+ MAX3232ECUP+T application circuit

관련 부품 & 용어

Analog Devices MAX3232ECUP+T MAX3232ECUP+ MAX3232ECPWR MAX3232IPWR MAX3232EIPW MAX3232IDWR MAX3232E RS-232 true RS-232 transceiver line driver line receiver dual charge pump EIA/TIA-232 interface TTL logic CMOS logic UART ESD protection 20-pin TSSOP TSSOP package family surface-mount package industrial control test and measurement equipment embedded serial interface
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기