Analog Devices

MAX3243EEUI+T - 250kbps 3/5 RS-232 Transceiver | Analog Devices

부품 번호: MAX3243EEUI+T ✓ 활성
3.0V to 5.5V Vdss 1µA Id EIA/TIA-232, V.28 and V.24 Rds(on) 28-pin TSSOP Package
MOQ: 1 |

MAX3243EEUI+T 개요

The Analog Devices MAX3243EEUI+T is a 3-driver, 5-receiver full-duplex RS-232 transceiver operating from a 3.0V to 5.5V supply at up to 250kbps, with ±15kV ESD protection and a 28-pin TSSOP package. The device integrates Maxim AutoShutdown technology, allowing the transmitter supply and internal circuitry to shut down when no valid receiver signal is detected. Its receiver set includes a complementary always-active receiver for external monitoring.

An RS-232 transceiver is an interface IC that converts between digital logic-level signals and differential, bipolar RS-232 line signals. The MAX3243 belongs to the RS-232 interface hierarchy, combining line drivers, line receivers, charge-pump voltage conversion, and automatic power management in one package. It is used to connect UART, microcontroller, industrial-control, and data-processing systems to legacy serial ports through a ±15kV-protected communications interface.

Key features include a 3.0V to 5.5V operating supply, 250kbps maximum data rate, three RS-232 drivers, five RS-232 receivers, and low 1µA shutdown supply current. The ±15kV ESD protection improves robustness when cables are connected or disconnected near exposed equipment. AutoShutdown and AutoShutdown Plus operation reduce supply current when the connected system is inactive, while the always-active receiver allows monitoring even when the main supply has shut down.

The MAX3243E family uses an internal charge-pump circuit to generate the positive and negative voltages required by RS-232 transmitters. This architecture lets a 3.0V to 5.5V system communicate with conventional RS-232 equipment without a separate negative supply. The MAX3243EEUI+T is specified for a -40°C to +85°C temperature range and is packaged in a 28-pin TSSOP for surface-mount industrial and embedded equipment.

Typical applications include industrial serial consoles, instrumentation interfaces, point-of-sale equipment, telecom systems, embedded control modules, and peripheral connectivity. In each case, the transceiver provides the electrical conversion and signal protection needed between a low-voltage digital controller and an RS-232 port. Designers should verify the required baud rate, cable length, connector protection, supply sequencing, and charge-pump capacitor placement against the manufacturer’s recommended application circuit.

For a robust design, place the charge-pump and supply-bypass capacitors close to their associated pins, route the RS-232 driver outputs and receiver inputs away from sensitive digital signals, and provide appropriate chassis grounding at the connector. The integrated ±15kV ESD protection does not replace external surge and lightning protection for long or unprotected cables. This page also organizes package, replacement, and application guidance to support faster engineering selection.

드롭인 대체품: MAX3243EEUI+T — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: MAX3243EEUI+T (동일 폼 팩터 및 풋프린트) — 차이점: Product Type, ESD Protection, Number of Receivers, Supply Voltage Range, Interface Standard.

Analog Devices
Product Type: RS-232 interface transceiver
ESD Protection: +/-15 kV
Supply Voltage Range: 3 V to 5.5 V
비교 대상: MAX3243EEUI+T →
Texas Instruments
ESD Protection: ±15 kV HBM
Supply Voltage Range: 3 V to 5.5 V
Interface Standard: RS-232
비교 대상: MAX3243EEUI+T →
Analog Devices
Product Type: RS-232 transceiver interface IC
Supply Voltage Range: +3 V to +5.5 V
Interface Standard: RS-232
비교 대상: MAX3243EEUI+T →
Analog Devices
Product Type: 3/5 RS-232 transceiver
Number of Receivers: 3 channels
Supply Voltage Range: +3 V to +5.5 V
비교 대상: MAX3243EEUI+T →
Analog Devices
Product Type: RS-232 transceiver interface IC
ESD Protection: Enhanced electrostatic discharge protection
Number of Receivers: 5 channels
비교 대상: MAX3243EEUI+T →
Analog Devices
Product Type: Multichannel RS-232 transceiver
ESD Protection: ±15 kV
Supply Voltage Range: 3.0 V to 5.5 V
비교 대상: MAX3243EEUI+T →
Analog Devices
ESD Protection: ±15 kV
Number of Receivers: 5
Supply Voltage Range: 3.0 V to 5.5 V
비교 대상: MAX3243EEUI+T →
Analog Devices
Product Type: 3/5 RS-232 transceiver
Number of Receivers: 4
Interface Standard: EIA/TIA-232 and V.28/V.24
비교 대상: MAX3243EEUI+T →
Maxim Integrated
Product Type: 3/5 RS-232 transceiver
Supply Voltage Range: 3.0 V to 5.5 V
Interface Standard: EIA/TIA-232 and V.28/V.24
비교 대상: MAX3243EEUI+T →
Analog Devices
Product Type: 3/5 RS-232 transceiver
ESD Protection: +/-15 kV
Supply Voltage Range: 3.0 V to 5.5 V
비교 대상: MAX3243EEUI+T →
Texas Instruments
Product Type: Multichannel RS-232 line driver/receiver
Supply Voltage Range: 3 V to 5.5 V
비교 대상: MAX3243EEUI+T →
Analog Devices
Number of Receivers: 3
Supply Voltage Range: +3 V to +5.5 V
비교 대상: MAX3243EEUI+T →

MAX3243EIPWR

✅ 드롭인
Texas Instruments
📦 28-TSSOP
Multichannel RS-232 line driver/receiver · 3 V to 5.5 V · 500 kbps · 3 channels · 5 channels · 3.3 V · plus or minus 15 kV IEC ESD protection · -40°C to +85°C

가격 문의

데이터시트 보기 →

ST3243EBTR

✅ 드롭인
📦 28-TSSOP
Same 3-driver/5-receiver RS-232 topology; operating voltage, data rate, shutdown behavior, and qualification values require pin-level verification

📋 참조 대체품 (카탈로그에 없음)

MAX3243EEUI+T 사양

Product Type RS-232 transceiver
Supply Voltage Range 3.0V to 5.5V
Maximum Data Rate 250kbps
Driver Count 3 drivers
Receiver Count 5 receivers
Duplex Mode Full duplex
ESD Protection ±15kV
Shutdown Supply Current 1µA
Power Management Feature AutoShutdown
동작 온도 범위 -40°C to +85°C
패키지 28-pin TSSOP
실장 유형 Surface mount
Supported Standards EIA/TIA-232, V.28 and V.24
RoHS 상태 RoHS compliant
Typical Application UART-to-RS-232 interface

MAX3243EEUI+T 28-pin tssop 핀 구성 가이드

MAX3243EEUI+T(28-pin tssop 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

MAX3243EEUI+T의 28-pin tssop 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MAX3243EEUI+T.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MAX3243EEUI+T 적합 용도: 6 애플리케이션s: Industrial Serial Console, Point-of-Sale Terminal, Instrumentation and Test Equipment, Embedded Data Acquisition Module, Telecom Network Equipment, Peripheral and Cable Connectivity.

🏭

Industrial Serial Console

The MAX3243EEUI+T fits an industrial serial console because its three drivers and five receivers support bidirectional RS-232 communication from a 3.0V to 5.5V embedded controller. The 250kbps maximum data rate provides ample margin for configuration, logging, and diagnostic traffic. Its -40°C to +85°C range is suitable for many industrial environments, while ±15kV ESD protection improves resilience during routine cable connection. The always-active receiver can also monitor a remote line while AutoShutdown reduces power. Designers should still add external surge protection when a console cable exits the enclosure or connects to unprotected industrial cabling.

🖥️

Point-of-Sale Terminal

A point-of-sale terminal can use the MAX3243EEUI+T to bridge a low-voltage UART controller to an RS-232 peripheral such as a printer, scanner, or customer display. The 3.0V to 5.5V supply range supports both 3.3V and 5V logic systems, and three transmitter channels allow several serial accessories to share a multi-drop wiring arrangement when the system design permits it. The 250kbps capability is substantially faster than common peripheral baud rates. AutoShutdown helps control idle-system consumption, and the integrated ±15kV protection provides useful margin for cables handled by store personnel.

🔧

Instrumentation and Test Equipment

The MAX3243EEUI+T is appropriate for legacy test and measurement equipment that still uses an RS-232 command or measurement port. Its 3-driver/5-receiver organization supports a control channel plus multiple monitoring inputs, while the 250kbps rate supports command throughput and moderate data logging. The always-active receiver is valuable when an instrument must observe a signal even while the main transceiver has entered AutoShutdown. Because laboratory and industrial cables can carry large external transients, the integrated ±15kV ESD rating should be complemented by suitable connector protection and a defined chassis-ground strategy.

🧩

Embedded Data Acquisition Module

The MAX3243EEUI+T can connect an embedded acquisition module to legacy RS-232 sensors, programmers, or service equipment. The device accepts a 3.0V to 5.5V supply, allowing operation from common embedded rails, and its 250kbps data rate is suitable for many command-oriented acquisition protocols. Five receivers provide additional monitoring paths for status and interlock signals. AutoShutdown is valuable in battery- or power-constrained portable systems because the supply current can fall to approximately 1µA when no valid activity is detected. Firmware should account for wake-up latency and ensure that required monitoring receivers remain active where appropriate.

🌐

Telecom Network Equipment

The MAX3243EEUI+T is suitable for service and configuration interfaces within telecom equipment that retains RS-232 connectivity. Its three drivers and five receivers can support equipment-control and monitoring functions, while the 250kbps rate is adequate for administrative commands and low-bandwidth diagnostics. The -40°C to +85°C operating range covers many outdoor and indoor telecom installations. AutoShutdown helps control consumption when management ports are idle, and ±15kV ESD protection strengthens the interface against nearby charged cables. Equipment exposed to lightning or severe industrial transients still requires coordinated surge protection, bonding, and grounding.

🔌

Peripheral and Cable Connectivity

The MAX3243EEUI+T provides robust logic-to-RS-232 conversion for peripherals connected by short or medium-length shielded cables. Its 250kbps capability supports printers, scanners, programming equipment, and legacy control modules without requiring a separate negative supply. The ±15kV ESD protection is particularly useful for user-accessible connectors because it increases tolerance to electrostatic discharge during installation and servicing. Automatic shutdown reduces board-level standby demand, while the always-active receiver supports monitoring functions that must remain available. The PCB design should preserve the manufacturer’s charge-pump capacitor layout and keep transceiver routing away from sensitive analog or high-speed digital paths.

Where can I buy MAX3243EEUI+T online?
Use the “Request a Quote” form on this page to request MAX3243EEUI+T availability, volume pricing, and order processing from XAIPART. The exact MAX3243EEUI+T ordering code includes the E temperature grade, 28-pin TSSOP package, and +T production-temperature suffix, so confirm that the quoted line item matches this complete MPN rather than a related MAX3243 variant.
What is the price of MAX3243EEUI+T?
The current price of MAX3243EEUI+T is handled through the “Request a Quote” form on this page rather than a static price table. Submit the required quantity and target package quantity-break levels, and the quote workflow will return the applicable commercial terms for the exact MAX3243EEUI+T ordering code.
What is the lead time for MAX3243EEUI+T?
Request current lead-time and minimum-order quantity for MAX3243EEUI+T through the “Request a Quote” form on this page. Lead time can depend on inventory position, scheduled manufacturer production, and order volume, so a binding delivery commitment should be obtained for the exact 28-pin TSSOP ordering code before committing the design to production.
Is MAX3243EEUI+T in stock?
The “Request a Quote” form on this page is the appropriate channel for checking current MAX3243EEUI+T stock, allocation, and order acceptance. Because the device is an orderable catalog part with a 3.0V to 5.5V supply, 250kbps data rate, and 28-pin TSSOP package, include the required quantity and manufacturing schedule in the request.
What are the key specifications of MAX3243EEUI+T that engineers should know?
The MAX3243EEUI+T is a 3.0V to 5.5V, 250kbps, 3-driver/5-receiver full-duplex RS-232 transceiver in a 28-pin TSSOP package. It provides ±15kV ESD protection, 1µA shutdown supply current, AutoShutdown behavior, and an always-active receiver for external monitoring. The Analog Devices product page identifies the device as an EIA/TIA-232 and V.28/V.24 communications interface.
What is the difference between MAX3243EEUI+T and MAX3243EIPWR?
Both devices are 3-driver, 5-receiver RS-232 transceivers, but their ordering and qualification details differ. The MAX3243EEUI+T uses the MAX3243E family in a 28-pin TSSOP and is specified from -40°C to +85°C, while the MAX3243EIPWR is a Texas Instruments-listed MAX3243E option in a 28-pin TSSOP. Confirm electrical limits, temperature grade, lifecycle status, and exact pin configuration before substitution.
When should I choose MAX3243EEUI+T over MAX3243EIPWR?
Choose MAX3243EEUI+T when the design specifically calls for the Analog Devices MAX3243E 28-pin TSSOP implementation and its -40°C to +85°C operating range. Consider MAX3243EIPWR when its manufacturer-specific qualifications, availability, or procurement conditions better match the project. Both use the same RS-232 transceiver function, so final selection should be based on an exact datasheet and pin-level review.
Can MAX3243EIPWR replace MAX3243EEUI+T on an existing PCB?
The MAX3243EIPWR can be considered as a possible replacement because both are listed as MAX3243E 3-driver/5-receiver devices in 28-pin TSSOP packages, but equivalence must be confirmed against the manufacturer pinout and electrical tables. Check package dimensions, lead pitch, pin functions, charge-pump capacitor connections, temperature range, and qualification markings before assigning the alternate part.
What can replace MAX3243EEUI+T in a pin-compatible design?
The MAX3243EIPWR is the closest listed candidate because it is a MAX3243E 3-driver/5-receiver RS-232 device in a 28-pin TSSOP package. The MAX3243ECAI+T uses a different 28-pin SSOP package and is therefore not a footprint drop-in for the MAX3243EEUI+T. Review the exact pin diagram, operating limits, and application circuit before approving any substitution.
Is MAX3243EEUI+T suitable for industrial equipment?
The MAX3243EEUI+T is suitable for many industrial serial-interface designs because it operates from 3.0V to 5.5V, supports rates up to 250kbps, includes ±15kV ESD protection, and has a -40°C to +85°C specified temperature range. Industrial suitability also depends on system-level surge protection, isolation requirements, environmental qualification, and the final production BOM specification.
Where to download the MAX3243EEUI+T datasheet PDF?
The official MAX3243E product page at Analog Devices provides the manufacturer’s datasheet and product resources for the MAX3243E family. Open the MAX3243EEUI+T orderable part within that family documentation and verify that the package, temperature, and ordering-code tables cover the exact suffix combination. The manufacturer page is also listed in the technical resources for this product.
Where can I find the MAX3243EEUI+T pinout?
Use the pin-description table and package drawing in the MAX3243E manufacturer datasheet to assign PCB tracks for MAX3243EEUI+T. The device is a 28-pin TSSOP, and its complete pin map includes power, ground, charge-pump, driver-output, receiver-input, enable/shutdown, and always-active-monitor connections. The public snippets do not reproduce every terminal name, so use the official diagram rather than inferring connections from the pin count.
How much power does MAX3243EEUI+T consume?
The MAX3243EEUI+T uses approximately 1µA of supply current when its on-board power supply and drivers are shut down through AutoShutdown. Active consumption depends on supply voltage, channel activity, data rate, and operating state. The 1µA figure is the shutdown value identified by Analog Devices, not a universal active-current rating for every data pattern.
Does MAX3243EEUI+T support 5V systems?
Yes. The MAX3243EEUI+T has a 3.0V to 5.5V operating supply range, allowing it to operate from either 3.3V or 5V system rails within the specified limits. The selected external capacitors and charge-pump implementation must match the manufacturer’s recommended values, and logic-level compatibility must be checked against the UART or host controller.
What is the best cross-brand equivalent for MAX3243EEUI+T?
The ST3243EBTR is a cross-brand candidate because it is described as a 3-driver, 5-receiver RS-232 device with a dual charge-pump circuit and enhanced ESD protection. Its package dimensions and exact pin mapping must be compared with the 28-pin TSSOP MAX3243EEUI+T footprint before it is considered a true drop-in replacement. Confirm operating voltage, data rate, shutdown behavior, and temperature range as well.

엔지니어링 참조 데이터: MAX3243EEUI+T — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose MAX3243EEUI+T when the design needs three RS-232 drivers, five receivers, 3.3V or 5V operation, data rates up to 250kbps, and integrated ±15kV ESD protection in a 28-pin TSSOP. It is especially useful when AutoShutdown is desired but one receiver must remain active for monitoring. MAX3243EIPWR is a close same-family alternative in the same listed package, but manufacturer ordering, qualification, and lifecycle details should be checked before approval. ST3243EBTR may serve as a cross-brand 3-driver/5-receiver option, although its operating range, shutdown behavior, data rate, and exact pin mapping require direct comparison with the manufacturer datasheet. Neither MAX3243ECAI+T nor MAX3243EETJ+T is a footprint drop-in because their listed SSOP-28 or TQFN-32 packages do not match the MAX3243EEUI+T TSSOP-28 land pattern.

대체품과의 비교

파라미터 이 제품 MAX3243EIPWR ST3243EBTR
Package 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP
Brand Analog Devices Texas Instruments STMicroelectronics
Transceiver Configuration 3 drivers, 5 receivers 3 drivers, 5 receivers 3 drivers, 5 receivers

주요 차별점

  • Higher channel count than a basic RS-232 interface (vs MAX232EIPWR)
  • Always-active monitoring receiver (vs ST3243EBTR)
  • Defined extended-temperature operating range (vs MAX3243EIPWR)

설계 노트

Follow the MAX3243E recommended layout for the charge-pump capacitors and supply bypass components. Keep these components close to their associated device pins, use short return paths, and place the bypass capacitor where its ground connection joins the main ground plane. The exact capacitor values and PCB dimensions must be taken from the manufacturer application circuit because changing the charge-pump layout can affect startup, ringing, and transmitter output behavior.

Separate RS-232 driver outputs and receiver inputs from clocks, sensors, ADC signals, and other low-level analog paths. Driver edges can couple into nearby traces even though the interface uses a differential bipolar protocol at its external pins. Route the cable-side nets directly toward the connector or protection device, maintain the recommended spacing from unprotected board edges, and provide a low-impedance chassis-ground connection at the equipment entry point.

Do not treat the integrated ±15kV ESD rating as complete lightning or industrial surge protection. Long external cables can present transients beyond the interface’s ESD withstand rating, so use appropriately rated protection when the cable leaves the enclosure. Also confirm the connector shield and chassis-ground strategy because incorrectly routing surge current through the logic ground can damage surrounding equipment.

Account for AutoShutdown timing in the host firmware. The device can reduce shutdown supply current to approximately 1µA, but waking, charge-pump startup, and receiver qualification add latency before communication is reliable. Keep an always-active receiver path when the system must monitor a remote RS-232 line during low-power operation, and validate the complete wake-up sequence across temperature and supply-voltage corners.

규정 준수 정보

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The product listing identifies MAX3243EEUI+T as RoHS compliant. Reach, AEC-Q100, lead-free, halogen-free, and conflict-minerals status are not established by the cited product information and remain unknown.

데이터 검증일: 2026-11-17 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

MAX3243EEUI+T datasheet MAX3243EEUI+T pinout MAX3243EEUI+T datasheet pdf MAX3243EEUI+T replacement MAX3243EEUI+T equivalent MAX3243EEUI+T price MAX3243EEUI+T stock MAX3243EEUI+T application circuit MAX3243EEUI+T vs MAX3243EIPWR MAX3243EEUI+T TSSOP-28 footprint Analog Devices MAX3243EEUI+T MAX3243EEUI+T 250kbps RS-232

관련 부품 & 용어

Analog Devices Maxim Integrated MAX3243EEUI+T MAX3243EIPWR ST3243EBTR RS-232 EIA/TIA-232 V.28 V.24 RS-232 transceiver line driver line receiver full duplex AutoShutdown charge-pump circuit 3.0V to 5.5V supply 250kbps data rate ±15kV ESD protection 28-pin TSSOP TSSOP package family surface mount semiconductor industrial serial communication UART interface
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기