Analog Devices

MAX3381ECUP+T - 250kbps RS-232 Transceiver | Analog Devices

부품 번호: MAX3381ECUP+T ✓ 활성
2.35V to 5.5V Vdss 1A Id V.28 and V.24 Rds(on) 20-TSSOP Package
MOQ: 1 |

MAX3381ECUP+T 개요

The Analog Devices MAX3381ECUP+T is a 2-transmitter, 2-receiver full-duplex RS-232 transceiver operating from 2.35V to 5.5V, supporting data rates up to 250kbps and providing 15kV ESD protection on I/O and logic pins in a 20-TSSOP package. It combines EIA/TIA-232, V.28, and V.24 interface requirements with low-power operation and integrated level translation.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received RS-232 signals back into digital logic levels. In the broader electronics hierarchy, an RS-232 transceiver belongs to interface ICs and line-driver and receiver devices, where it protects a host controller from the voltage range and electrostatic-discharge exposure of a serial connection.

The MAX3381E family supports two transmit channels and two receive channels, allowing full-duplex communication through one package. Its 2.35V minimum supply voltage supports modern low-voltage embedded systems, while the 5.5V maximum accommodates conventional 5V equipment. The 250kbps maximum data rate is suitable for industrial control links, point-of-sale equipment, data acquisition, and service interfaces.

Integrated charge-pump circuitry generates the bipolar voltage required to transmit RS-232-compatible levels from a single low-voltage supply. According to the manufacturer datasheet, enhanced electrostatic-discharge protection is provided on both the TTL and RS-232 sides, covering the 15kV ESD-protected I/O and logic pins identified for this device.

Typical uses include industrial serial controllers, programmable-logic or microcontroller UART links, instrumentation, and embedded control systems. The two transmitters can support separate outbound channels, while the two receivers allow simultaneous inbound monitoring or redundant communication paths when the connected system requires them.

PCB design should provide a solid ground plane, place charge-pump and interface components close to the device, and preserve adequate clearances around connected RS-232 lines. Decoupling capacitors should be placed directly beside the supply pins. The 20-TSSOP footprint is compact, but its narrow lead pitch requires careful inspection and reliable assembly processes.

This product page combines operating limits, interface characteristics, application guidance, package details, and same-family drop-in alternatives to support component selection and PCB design before an RS-232 interface is committed to production.

드롭인 대체품: MAX3381ECUP+T — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: MAX3381ECUP+T (동일 폼 팩터 및 풋프린트) — 차이점: Interface Standard, Package, Supply Voltage Range.

Analog Devices
Interface Standard: EIA/TIA-232, V.28 and V.24
Package: 20-pin TSSOP
Supply Voltage Range: +2.35 V to +5.5 V
비교 대상: MAX3381ECUP+T →

MAX3380ECUP+T

✅ 드롭인 ⚠️ 사양 미검증
Analog Devices
📦 20-TSSOP
+2.35 V to +5.5 V · 2 channels · 2 channels · EIA/TIA-232 and V.28/V.24 · ±15 kV · 1.65 V · VL pin

가격 문의

데이터시트 보기 →

MAX3381CUP+T

✅ 드롭인 ⚠️ 사양 미검증
📦 20-TSSOP
ESD protection rating is lower than the target's 15kV, while the 250kbps interface and package remain aligned

📋 참조 대체품 (카탈로그에 없음)

MAX3380CUP+T

✅ 드롭인 ⚠️ 사양 미검증
📦 20-TSSOP
Maximum data rate and ESD rating are lower than the target's 250kbps and 15kV values

📋 참조 대체품 (카탈로그에 없음)

MAX3380EEUP+T

✅ 드롭인 ⚠️ 사양 미검증
Analog Devices
📦 20-TSSOP
RS-232 transceiver · 2 transmitters · 2 receivers · +2.35V to +5.5V · 460 kbps · Down to +1.65V · ±15 kV on I/O and logic pins · EIA/TIA-232 and V.28/V.24

가격 문의

데이터시트 보기 →

MAX3381EEUP+T

✅ 드롭인 ⚠️ 사양 미검증
Analog Devices
📦 20-TSSOP
2 Transmitter / 2 Receiver · +2.35 V to +5.5 V · 1 µA · ±15 kV · ±15 kV · EIA/TIA-232, V.28 and V.24 · 20 pins · 20-pin TSSOP

가격 문의

데이터시트 보기 →

MAX3381ECUP+T 사양

Product Type RS-232 transceiver
Transmitter Count 2
Receiver Count 2
Duplex Mode Full duplex
Supply Voltage Range 2.35V to 5.5V
Maximum Data Rate 250kbps
ESD Protection 15kV
Specified Current 1A
Interface Standard EIA/TIA-232
Communication Standards V.28 and V.24
Power Requirements Low power
패키지 20-TSSOP
실장 유형 Surface mount

MAX3381ECUP+T 20-tssop 핀 구성 가이드

MAX3381ECUP+T(20-tssop 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

MAX3381ECUP+T의 20-tssop 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MAX3381ECUP+T.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MAX3381ECUP+T 적합 용도: 6 애플리케이션s: Industrial Control Serial Interfaces, Point-of-Sale Terminal Communication, Data Acquisition and Instrumentation, Embedded Service and Configuration Ports, Communication Hubs and Serial Routers, Programmable Logic and MCU UART Links.

🏭

Industrial Control Serial Interfaces

The MAX3381ECUP+T fits industrial control equipment that must bridge a low-voltage UART controller to a full-duplex RS-232 link. Its 2.35V to 5.5V operating range supports both 3.3V embedded processors and 5V controller platforms, while the two transmitters and two receivers provide dedicated outbound and inbound channels. The 250kbps rate supports supervisory commands, configuration transfers, and status monitoring. Its 15kV ESD protection adds useful system-level resilience on connector-facing circuits, although the assembled interface still requires appropriate grounding, shielding, and surge protection for the installation environment.

🖥️

Point-of-Sale Terminal Communication

The MAX3381ECUP+T can serve as the RS-232 interface between a point-of-sale controller and a peripheral such as a receipt printer, customer display, or magnetic-card reader. The 250kbps data rate is comfortably above the throughput required by typical transaction traffic, and full-duplex operation permits simultaneous command transmission and response reception. Operation from a 3.3V rail helps reduce system power in compact terminals. Two transmit and two receive channels also support multiple peripheral ports when the host uses independent UART channels. Placement near the connector is recommended so that ESD-protected interface pins receive the least exposed copper routing.

📺

Data Acquisition and Instrumentation

The MAX3381ECUP+T is appropriate for laboratory and industrial instrumentation that uses RS-232 as a control or measurement-data link. Its 250kbps maximum data rate supports command polling and moderate-volume data transfer, while the two receiver channels can monitor two incoming signals and the two transmitter channels can drive separate outbound buses when required. The single-supply charge-pump architecture simplifies implementation in 3.3V and 5V embedded instruments. Designers should maintain a continuous return path between connected equipment, place bypass capacitance at the supply pins, and test the interface under the ground-potential differences common on long serial cables.

🔧

Embedded Service and Configuration Ports

The MAX3381ECUP+T is useful in embedded systems that retain an RS-232 service connector for configuration, diagnostics, or firmware maintenance. Running from 2.35V to 5.5V allows the interface to coexist with modern low-voltage processors, and the 250kbps rate provides adequate speed for boot logs and command-line maintenance sessions. Full-duplex operation helps avoid protocol restrictions caused by a single shared direction path. The 15kV ESD protection on logic and interface pins improves resilience during connector handling. For field reliability, retain the connector chassis ground near the board entry point and route the high-voltage RS-232 traces away from sensitive clock and sensing circuitry.

🌐

Communication Hubs and Serial Routers

A serial router or communication hub can use the MAX3381ECUP+T when two independent RS-232 paths are advantageous. One transmitter and receiver pair can face the upstream controller, while the other pair connects a downstream field device. The full-duplex architecture supports simultaneous traffic in each path, and the 250kbps rate is suitable for command-oriented protocols, diagnostic channels, and low-to-moderate data streams. Because each line interface is exposed to an external connector, the integrated 15kV ESD protection helps reduce component stress. Proper grounding remains essential because RS-232 voltage levels are referenced to ground, and incorrect cable grounding can cause communication errors independently of transceiver performance.

💻

Programmable Logic and MCU UART Links

The MAX3381ECUP+T connects a programmable-logic device or microcontroller UART to an RS-232 port without requiring an external level-shifting network. Its 2.35V minimum supply voltage is compatible with low-voltage logic systems, while 250kbps operation provides sufficient signaling rate for standard serial-control protocols. The two transmitters and two receivers give the design flexibility for bidirectional communication or dual-port equipment. In an FPGA-based system, the interface pins can be assigned in the same way as ordinary UART signals, while the analog RS-232 line handling remains isolated on the opposite side of the IC. Place decoupling and charge-pump support components close to their associated pins according to the datasheet layout guidance.

Where can I buy MAX3381ECUP+T online?
The MAX3381ECUP+T can be requested through the Request a Quote form on this page. The part is identified as an Analog Devices 2-transmitter, 2-receiver RS-232 transceiver in a 20-TSSOP package, and the request form can be used to confirm current inventory, order quantity, delivery timing, and logistics requirements before placing an order.
What is the price of MAX3381ECUP+T?
Current MAX3381ECUP+T pricing is presented through the Request a Quote form on this page rather than as a fixed public price. The component is ordered in tape-and-reel packaging under the MAX3381ECUP+T designation, and the quote request should specify the required quantity, delivery location, and preferred shipment terms so the commercial response reflects the actual order.
What is the lead time for MAX3381ECUP+T?
The current lead time for MAX3381ECUP+T should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, inventory position, and manufacturing conditions, so an allocation should be obtained before committing a production schedule. The device is listed as being in active production, but that status alone does not guarantee a fixed delivery interval.
Is MAX3381ECUP+T in stock?
Stock for MAX3381ECUP+T should be confirmed through the Request a Quote form on this page. The part is listed as being in active production, and distributor records indicate it is commercially sourced, but the quantity available for a particular order may change. Include your required quantity, date code preferences, and shipment destination in the request.
What are the key specifications of MAX3381ECUP+T that engineers should know?
The MAX3381ECUP+T is a 250kbps full-duplex RS-232 transceiver with two transmitters, two receivers, a 2.35V to 5.5V supply range, and 15kV ESD protection on its I/O and logic pins. It is housed in a 20-TSSOP package. These characteristics make it suitable for compact, low-voltage embedded systems that require bidirectional RS-232 connectivity and protected physical interfaces.
What is the difference between MAX3381ECUP+T and MAX3380ECUP+T?
The MAX3381ECUP+T supports operation up to 250kbps, while the MAX3380 family is associated with a lower maximum signaling rate. Both devices use the same MAX338xE RS-232 transceiver family architecture and 20-TSSOP footprint, making the MAX3380 a relevant same-family option when the lower data rate is sufficient. Confirm the individual pin functions and timing requirements against the manufacturer datasheet before substitution.
When should I choose MAX3381ECUP+T over MAX3380ECUP+T?
Choose MAX3381ECUP+T when the serial link must operate above the MAX3380 family's lower maximum data rate or when the design specifically calls for the MAX3381E feature set. The MAX3381 provides two transmitters, two receivers, full-duplex operation, a 2.35V to 5.5V supply range, and 250kbps operation. Use MAX3380 when its lower rate is adequate and the board requirements are otherwise identical.
Is MAX3381ECUP+T suitable for a 3.3V embedded controller?
Yes, the MAX3381ECUP+T is suitable for a 3.3V embedded controller because its specified supply range is 2.35V to 5.5V. It converts between controller logic levels and RS-232 line levels, while its two transmitters and two receivers support full-duplex communication. The controller’s UART pins, supply decoupling, and signal-level requirements must still match the device interface configuration.
What is the best drop-in replacement for MAX3381ECUP+T?
The closest same-family drop-in choices are the MAX3380 and MAX3381 variants offered in the same 20-TSSOP footprint, subject to the specific ESD and temperature suffix required by the design. The MAX3381ECUP+T provides 250kbps operation and 15kV ESD protection, so a replacement should match those requirements. No cross-brand part is presented as a verified drop-in replacement.
Can a MAX3380ECUP+T replace MAX3381ECUP+T?
A MAX3380ECUP+T can replace the MAX3381ECUP+T when the lower maximum data rate of the MAX3380 family is acceptable and its electrical ratings meet the design limits. Both use the same 20-TSSOP family footprint and provide two transmitters and two receivers. It should not be selected for a link requiring the MAX3381's 250kbps maximum signaling rate.
What can replace MAX3381ECUP+T?
Same-brand MAX3380 and MAX3381 family options are the most credible replacements because they share the RS-232 transceiver architecture and 20-TSSOP package. Choose a MAX3381 variant when the 250kbps rate and 15kV ESD protection are mandatory. Choose a MAX3380 variant only when its lower maximum data rate is acceptable. Verify the temperature grade, suffix, and pin-level requirements before releasing the replacement into production.
Is MAX3381ECUP+T the same as MAX3380ECUP+T?
No, they are closely related but not identical: MAX3381ECUP+T supports up to 250kbps, while MAX3380 is the lower-data-rate member of the same interface family. Their shared 20-TSSOP footprint makes them useful alternatives for board reuse, but an exact functional substitution depends on the required bit rate and environmental qualification. The target MAX3381 should remain the choice for its specified 250kbps performance.
Where can I download the MAX3381ECUP+T datasheet PDF?
The MAX3381ECUP+T datasheet can be accessed through the datasheet link on this page, which opens the MAX3381ECUP datasheet document. The document should be used to confirm the complete 20-pin assignment, electrical characteristics, timing, supply-current behavior, and absolute maximum ratings. Apply the exact ordering code MAX3381ECUP+T when checking the 20-TSSOP tape-and-reel configuration.
Where can I find the MAX3381ECUP+T pinout?
The MAX3381ECUP+T pinout is defined in the pin-description section of the manufacturer datasheet. Because the device uses a 20-TSSOP package, verify every terminal number against that diagram before assigning transmitter outputs, receiver inputs, supply pins, ground connections, enable controls, or charge-pump components. Do not infer pin functions from a similarly named package or another MAX338x variant.
What is the best Analog Devices equivalent for MAX3381ECUP+T?
The most relevant Analog Devices equivalents are same-family MAX3380 and MAX3381 20-TSSOP devices, subject to rate, ESD, and temperature-grade requirements. The MAX3381ECUP+T remains preferable when 250kbps operation and 15kV ESD protection are required. A cross-brand equivalent is not identified because a verified match must preserve the package, pin functions, electrical limits, and interface timing without introducing an unverified redesign.

엔지니어링 참조 데이터: MAX3381ECUP+T — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose MAX3381ECUP+T when the design requires a 250kbps full-duplex RS-232 interface, two transmitters and two receivers, operation from 2.35V to 5.5V, and 15kV ESD protection on exposed pins. Choose MAX3380ECUP+T or MAX3380EEUP+T when the lower maximum data rate of the MAX3380 family is sufficient but the package, channel count, supply range, and enhanced ESD suffix remain desirable. Choose MAX3381EEUP+T when its temperature-grade suffix better matches the product environmental requirement while retaining the same 250kbps interface performance. Choose MAX3381CUP+T or MAX3380CUP+T only when their lower ESD-protection class is acceptable for the final enclosure and connector design. All listed candidates use the 20-TSSOP footprint, but production substitution still requires checking the manufacturer pin description, absolute maximum ratings, startup behavior, and qualification markings.

대체품과의 비교

파라미터 이 제품 MAX3380ECUP+T MAX3381CUP+T MAX3380CUP+T MAX3380EEUP+T MAX3381EEUP+T
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 20-TSSOP 20-TSSOP 20-TSSOP 20-TSSOP 20-TSSOP 20-TSSOP
Transmitter Count 2 2 2 2 2 2
Receiver Count 2 2 2 2 2 2
Maximum Data Rate 250kbps Lower than 250kbps 250kbps Lower than 250kbps Lower than 250kbps 250kbps
Supply Voltage Range 2.35V to 5.5V 2.35V to 5.5V 2.35V to 5.5V 2.35V to 5.5V 2.35V to 5.5V 2.35V to 5.5V
ESD Protection 15kV 15kV Lower than 15kV Lower than 15kV 15kV 15kV
Duplex Mode Full duplex Full duplex Full duplex Full duplex Full duplex Full duplex
Interface Standard EIA/TIA-232, V.28 and V.24 EIA/TIA-232, V.28 and V.24 EIA/TIA-232, V.28 and V.24 EIA/TIA-232, V.28 and V.24 EIA/TIA-232, V.28 and V.24 EIA/TIA-232, V.28 and V.24

주요 차별점

  • Higher maximum serial data rate in the MAX3381 family (vs MAX3380ECUP+T)
  • Maximum listed ESD protection for exposed interface pins (vs MAX3381CUP+T)
  • Matched 250kbps performance with a broader temperature-grade choice (vs MAX3381EEUP+T)

설계 노트

Place the charge-pump capacitors and supply bypass capacitors immediately beside their associated MAX3381ECUP+T pins. Keep the high-voltage RS-232 traces short where possible, provide a continuous ground reference beneath the interface area, and avoid routing them parallel to sensitive clocks or sensor inputs. The 20-TSSOP footprint uses a narrow lead pitch, so assembly inspection should verify solder bridging and pin-to-pin continuity after reflow.

Do not treat the 15kV ESD rating as protection against every RS-232 cable event. ESD performance depends on correct use of the interface pins, clean ground connections, and an appropriate enclosure and chassis strategy. Verify the complete pin configuration in the manufacturer datasheet before assigning receiver inputs, transmitter outputs, enable controls, and charge-pump components. Also confirm that the UART baud rate and cable length are compatible with the selected 250kbps operating mode.

For systems containing both RS-232 and sensitive analog circuitry, orient the connector and transceiver toward the board edge and keep logic-side traces away from the connector-facing section. Maintain a low-impedance ground plane and use a dedicated return path where practical. If a protection network is added, coordinate its capacitance and clamping behavior with the transceiver's receiver thresholds to avoid degrading signal integrity or timing.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for the exact ordering code. The device is a commercial interface IC, not an automotive-qualified variant.

데이터 검증일: 2026-11-09 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

MAX3381ECUP+T datasheet MAX3381ECUP+T pinout MAX3381ECUP+T datasheet pdf MAX3381ECUP+T 250kbps MAX3381ECUP+T 20-TSSOP MAX3381ECUP+T equivalent MAX3381ECUP+T replacement MAX3381ECUP+T vs MAX3380ECUP+T MAX3381ECUP+T price MAX3381ECUP+T stock Analog Devices MAX3381ECUP+T MAX3381ECUP+T RS-232 transceiver

관련 부품 & 용어

Analog Devices MAX3381ECUP+T MAX3380ECUP+T MAX3381CUP+T MAX3380CUP+T MAX3380EEUP+T MAX3381EEUP+T RS-232 transceiver interface IC line driver line receiver EIA/TIA-232 V.28 V.24 TTL logic full duplex 250kbps 2.35V to 5.5V supply 15kV ESD protection charge-pump voltage converter 20-TSSOP TSSOP package family surface-mount package industrial serial communication point-of-sale terminal embedded UART interface
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기