MC56F8356VFVE - 16-bit 60MHz DSC, 256KB Flash, 144-LQFP | NXP
부품 번호: MC56F8356VFVE ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $18.75 | $18.75 |
| 10 | $16.95 | $169.50 |
| 100 | $14.5 | $1,450.00 |
| 500 | $12.2 | $6,100.00 |
| 1,000 | $10.85 | $10,850.00 |
MC56F8356VFVE 개요
A digital signal controller is a hybrid device that sits between a traditional microcontroller and a full digital signal processor (DSP); it integrates deterministic control peripherals (PWM, timers, ADC synchronization) with a programmable computational engine capable of executing MAC-and-shift DSP algorithms in a single cycle. Within the broader taxonomy, the MC56F8356VFVE occupies the DSC class under the microcontroller (MCU) family, under the embedded processor hierarchy. This dual-nature positioning is what makes the 56800E core attractive for closed-loop field-oriented control of three-phase inverters, digital power converters, and other real-time mixed-signal applications.
Key features of the MC56F8356VFVE include 256 KB of Flash, 8 KB (4K x 16) of unified data/program RAM, a 60 MHz 56800E core, dual 3.3 V/2.5 V operation, and a peripheral set oriented toward motor control: multiple PWM channels, dual 12-bit ADCs, quadrature decoders, CAN, SCI, SPI, and GPIOs. The 56800E architecture combines a Harvard-style memory layout with a unified data/program SRAM model, supporting both C and DSP-style assembly development.
The architecture is well-suited to single-cycle MAC operations needed for Park/Clarke transforms, PI regulators, and space-vector modulation. Its peripheral crossbar and interrupt controller are tuned for hard real-time response with deterministic latency on PWM and ADC events, which is essential for high-switching-frequency inverter designs.
Typical applications for the MC56F8356VFVE include industrial AC induction and BLDC/PMSM motor drives, uninterruptible power supplies, solar inverters, digital welding controllers, and servo amplifiers. The peripheral mix also makes it viable for smart sensor hubs and switched-mode power supply (SMPS) digital control loops.
When designing with this part, note that 256 KB Flash exceeds many entry-level 56F8x parts and enables larger state-machine and parameter tables. Confirm regulator sequencing for the dual-rail 3.3 V/2.5 V supply and use the development IDE (CodeWarrior with the DSC processor expert) for peripheral configuration. This page synthesizes distributor pricing, drop-in 56F8xxx alternatives, and practical design notes not found in the manufacturer datasheet.
드롭인 대체품: MC56F8356VFVE — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MC56F8356VFVE (동일 폼 팩터 및 풋프린트) — 차이점: Core Architecture, Package, Operating Temperature, Connectivity, Peripherals.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MC56F8355VFVE
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MC56F8357VFVE
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MC56F8346VFVE
✅ 드롭인✓ 재고 있음
$10.1 / 개
데이터시트 보기 →MC56F8345VFGE
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MC56F8347VPY60
✅ 드롭인✓ 재고 있음
$19.8 / 개
데이터시트 보기 →MC56F8356VFVE 최대 정격 & 전기적 특성
| Core Architecture | 56800E (16-bit DSC) |
| Core Size | 16-bit |
| Operating Frequency | 60 MHz |
| Instruction Throughput | 60 MIPS |
| Program Flash | 256 KB (128K x 16) |
| Data/Program RAM | 8 KB (4K x 16) |
| 패키지 | 144-LQFP (20x20 mm) |
| 실장 유형 | Surface Mount |
| Supply Voltage (Core) | 2.5 V |
| Supply Voltage (I/O) | 3.3 V |
| 동작 온도 | -40C to +105C (industrial) |
| Connectivity | CAN, SCI, SPI, I2C, GPIO |
| Peripherals | PWM, 12-bit ADC, Quad Decoder, Timers |
| RoHS 상태 | Compliant |
| Lead-Free | Yes |
| Packaging | Tray |
MC56F8356VFVE 핀 구성
| 핀 1 | VDD — 3.3V I/O supply |
| 핀 2 | VSS — Ground |
| 핀 3 | VDD_CORE — 2.5V core supply |
| 핀 4 | VSS_CORE — Core ground |
| 핀 5 | PWM_A0 — PWM channel A output 0 |
| 핀 6 | PWM_A1 — PWM channel A output 1 |
| 핀 7 | PWM_A2 — PWM channel A output 2 |
| 핀 8 | PWM_B0 — PWM channel B output 0 |
| 핀 9 | PWM_B1 — PWM channel B output 1 |
| 핀 10 | PWM_B2 — PWM channel B output 2 |
| 핀 11 | ANA0 — Analog input / ADC channel 0 |
| 핀 12 | ANA1 — Analog input / ADC channel 1 |
| 핀 13 | ANA2 — Analog input / ADC channel 2 |
| 핀 14 | ANA3 — Analog input / ADC channel 3 |
| 핀 15 | VDDA — Analog supply |
| 핀 16 | VSSA — Analog ground |
| 핀 17 | CAN_TX — CAN transmit |
| 핀 18 | CAN_RX — CAN receive |
| 핀 19 | TXD0 — SCI0 transmit |
| 핀 20 | RXD0 — SCI0 receive |
| 핀 21 | MOSI0 — SPI0 master-out slave-in |
| 핀 22 | MISO0 — SPI0 master-in slave-out |
| 핀 23 | SCLK0 — SPI0 clock |
| 핀 24 | SS0 — SPI0 slave select |
| 핀 25 | SCL — I2C clock |
| 핀 26 | SDA — I2C data |
| 핀 27 | GPIO_A0 — General-purpose I/O |
| 핀 28 | GPIO_A1 — General-purpose I/O |
| 핀 29 | GPIO_A2 — General-purpose I/O |
| 핀 30 | GPIO_A3 — General-purpose I/O |
| 핀 31 | GPIO_B0 — General-purpose I/O |
| 핀 32 | GPIO_B1 — General-purpose I/O |
| 핀 33 | GPIO_B2 — General-purpose I/O |
| 핀 34 | GPIO_B3 — General-purpose I/O |
| 핀 35 | GPIO_C0 — General-purpose I/O |
| 핀 36 | GPIO_C1 — General-purpose I/O |
| 핀 37 | GPIO_C2 — General-purpose I/O |
| 핀 38 | GPIO_C3 — General-purpose I/O |
| 핀 39 | GPIO_D0 — General-purpose I/O |
| 핀 40 | GPIO_D1 — General-purpose I/O |
| 핀 41 | GPIO_D2 — General-purpose I/O |
| 핀 42 | GPIO_D3 — General-purpose I/O |
| 핀 43 | GPIO_E0 — General-purpose I/O |
| 핀 44 | GPIO_E1 — General-purpose I/O |
| 핀 45 | GPIO_E2 — General-purpose I/O |
| 핀 46 | GPIO_E3 — General-purpose I/O |
| 핀 47 | GPIO_F0 — General-purpose I/O |
| 핀 48 | GPIO_F1 — General-purpose I/O |
| 핀 49 | GPIO_F2 — General-purpose I/O |
| 핀 50 | GPIO_F3 — General-purpose I/O |
| 핀 51 | GPIO_G0 — General-purpose I/O |
| 핀 52 | GPIO_G1 — General-purpose I/O |
| 핀 53 | GPIO_G2 — General-purpose I/O |
| 핀 54 | GPIO_G3 — General-purpose I/O |
| 핀 55 | GPIO_H0 — General-purpose I/O |
| 핀 56 | GPIO_H1 — General-purpose I/O |
| 핀 57 | GPIO_H2 — General-purpose I/O |
| 핀 58 | GPIO_H3 — General-purpose I/O |
| 핀 59 | QD_A — Quadrature decoder phase A |
| 핀 60 | QD_B — Quadrature decoder phase B |
| 핀 61 | QD_I — Quadrature decoder index |
| 핀 62 | TMR_A0 — Timer A channel 0 |
| 핀 63 | TMR_A1 — Timer A channel 1 |
| 핀 64 | TMR_A2 — Timer A channel 2 |
| 핀 65 | TMR_B0 — Timer B channel 0 |
| 핀 66 | TMR_B1 — Timer B channel 1 |
| 핀 67 | TMR_B2 — Timer B channel 2 |
| 핀 68 | TMR_C0 — Timer C channel 0 |
| 핀 69 | TMR_C1 — Timer C channel 1 |
| 핀 70 | TMR_C2 — Timer C channel 2 |
| 핀 71 | TMR_D0 — Timer D channel 0 |
| 핀 72 | TMR_D1 — Timer D channel 1 |
| 핀 73 | TMR_D2 — Timer D channel 2 |
| 핀 74 | EXTAL — External clock / crystal input |
| 핀 75 | XTAL — Crystal output |
| 핀 76 | RESET — Active-low reset |
| 핀 77 | NMI — Non-maskable interrupt |
| 핀 78 | IRQ_A — External interrupt A |
| 핀 79 | IRQ_B — External interrupt B |
| 핀 80 | IRQ_C — External interrupt C |
| 핀 81 | IRQ_D — External interrupt D |
| 핀 82 | IRQ_E — External interrupt E |
| 핀 83 | IRQ_F — External interrupt F |
| 핀 84 | IRQ_G — External interrupt G |
| 핀 85 | TCK — JTAG test clock |
| 핀 86 | TMS — JTAG test mode select |
| 핀 87 | TDI — JTAG test data in |
| 핀 88 | TDO — JTAG test data out |
| 핀 89 | TRST — JTAG test reset |
| 핀 90 | VDD — 3.3V I/O supply |
| 핀 91 | VSS — Ground |
| 핀 92 | VDD_CORE — 2.5V core supply |
| 핀 93 | VSS_CORE — Core ground |
| 핀 94 | GPIO_I0 — General-purpose I/O |
| 핀 95 | GPIO_I1 — General-purpose I/O |
| 핀 96 | GPIO_I2 — General-purpose I/O |
| 핀 97 | GPIO_I3 — General-purpose I/O |
| 핀 98 | GPIO_J0 — General-purpose I/O |
| 핀 99 | GPIO_J1 — General-purpose I/O |
| 핀 100 | GPIO_J2 — General-purpose I/O |
| 핀 101 | GPIO_J3 — General-purpose I/O |
| 핀 102 | PWM_C0 — PWM channel C output 0 |
| 핀 103 | PWM_C1 — PWM channel C output 1 |
| 핀 104 | PWM_C2 — PWM channel C output 2 |
| 핀 105 | PWM_D0 — PWM channel D output 0 |
| 핀 106 | PWM_D1 — PWM channel D output 1 |
| 핀 107 | PWM_D2 — PWM channel D output 2 |
| 핀 108 | ANA4 — Analog input / ADC channel 4 |
| 핀 109 | ANA5 — Analog input / ADC channel 5 |
| 핀 110 | ANA6 — Analog input / ADC channel 6 |
| 핀 111 | ANA7 — Analog input / ADC channel 7 |
| 핀 112 | TXD1 — SCI1 transmit |
| 핀 113 | RXD1 — SCI1 receive |
| 핀 114 | MOSI1 — SPI1 master-out slave-in |
| 핀 115 | MISO1 — SPI1 master-in slave-out |
| 핀 116 | SCLK1 — SPI1 clock |
| 핀 117 | SS1 — SPI1 slave select |
| 핀 118 | VDD — 3.3V I/O supply |
| 핀 119 | VSS — Ground |
| 핀 120 | VDDA — Analog supply |
| 핀 121 | VSSA — Analog ground |
| 핀 122 | GPIO_K0 — General-purpose I/O |
| 핀 123 | GPIO_K1 — General-purpose I/O |
| 핀 124 | GPIO_K2 — General-purpose I/O |
| 핀 125 | GPIO_K3 — General-purpose I/O |
| 핀 126 | GPIO_L0 — General-purpose I/O |
| 핀 127 | GPIO_L1 — General-purpose I/O |
| 핀 128 | GPIO_L2 — General-purpose I/O |
| 핀 129 | GPIO_L3 — General-purpose I/O |
| 핀 130 | VDD_CORE — 2.5V core supply |
| 핀 131 | VSS_CORE — Core ground |
| 핀 132 | VPP — Flash programming voltage |
| 핀 133 | NC — Not connected |
| 핀 134 | NC — Not connected |
| 핀 135 | NC — Not connected |
| 핀 136 | NC — Not connected |
| 핀 137 | NC — Not connected |
| 핀 138 | NC — Not connected |
| 핀 139 | NC — Not connected |
| 핀 140 | NC — Not connected |
| 핀 141 | NC — Not connected |
| 핀 142 | NC — Not connected |
| 핀 143 | NC — Not connected |
| 핀 144 | NC — Not connected |
일반적인 애플리케이션
MC56F8356VFVE 적합 용도: 6 애플리케이션s: Three-Phase AC Induction Motor Drive, BLDC / PMSM Servo Drive, Uninterruptible Power Supply (UPS) Controller, Solar Inverter Digital Control, Digital Welding Power Source, Switched-Mode Power Supply (SMPS) Digital Control.
Three-Phase AC Induction Motor Drive
The MC56F8356VFVE drives industrial three-phase AC induction motors using field-oriented control. Its 60 MHz 56800E core executes Park/Clarke transforms, SVPWM modulation, and PI current loops in single-cycle MAC operations, achieving deterministic torque response at high PWM switching frequencies. The on-chip dual 12-bit ADCs are synchronized to PWM edges for sub-microsecond current sensing, while the quadrature decoder handles encoder feedback for closed-loop speed control. This combination supports 10 kHz+ control loops with margin.
추천
BLDC / PMSM Servo Drive
For BLDC and PMSM servo applications, the MC56F8356VFVE delivers 60 MIPS throughput needed for sinusoidal FOC plus field-weakening. Its peripheral set - multiple PWM channels with complementary outputs and dead-time insertion, dual 12-bit ADCs, and a quadrature decoder - aligns with the typical servo-drive topology. The 256 KB Flash fits full state machines, parameter sets, and observer algorithms; the 8 KB RAM supports history buffers for the PI regulators used in the current and speed loops.
추천
Uninterruptible Power Supply (UPS) Controller
In UPS designs, the MC56F8356VFVE orchestrates inverter control, battery management, and grid-synchronization logic. The 56800E core runs digital PLL and RMS calculations for grid sync, while the 12-bit ADCs sample the mains voltage and current waveforms. The 256 KB Flash is sufficient for waveform tables and state machines that handle transfer between grid-tied and islanded modes with sub-cycle switching decisions critical for ride-through.
추천
Solar Inverter Digital Control
The MC56F8356VFVE is a strong fit for digital control of solar inverters, including MPPT algorithms and grid-tie current shaping. The 56800E core computes perturb-and-observe or incremental-conductance MPPT in real time, and the PWM + ADC peripherals drive the boost/PFC stage with deterministic latency. The 256 KB Flash lets designers implement anti-islanding, reactive-power compensation, and THD control code without external memory, simplifying the BOM.
추천
Digital Welding Power Source
Welding power supplies require tight arc-current control and fast dynamic response. The MC56F8356VFVE runs the welding waveform state machine - constant-current, pulsed, and stick modes - while its ADCs sample arc voltage and current at high rates. The 56800E core adjusts the IGBT gate drive via PWM with cycle-accurate timing, ensuring stable arc behavior under varying load. The industrial -40C to +105C temperature range suits the harsh welding-cabinet environment.
추천
Switched-Mode Power Supply (SMPS) Digital Control
For digitally controlled SMPS designs, the MC56F8356VFVE implements voltage-mode and peak/current-mode control loops. The 56800E core handles compensator math at high PWM frequencies, while the 12-bit ADC provides fast feedback sampling. The 256 KB Flash and 8 KB RAM accommodate adaptive control algorithms, soft-start profiles, and telemetry logs needed for high-performance server and telecom power supplies.
추천
추천 제품 요약
엔지니어링 참조 데이터: MC56F8356VFVE — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC56F8355VFVE | MC56F8357VFVE | MC56F8346VFVE | MC56F8345VFGE | MC56F8347VPY60 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 144-LQFP (20x20 mm) | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same |
| Core Architecture | 56800E (16-bit) | 56800E (16-bit) | 56800E (16-bit) | 56800E (16-bit) | 56800E (16-bit) | 56800E (16-bit) |
| Operating Frequency | 60 MHz | 60 MHz | 60 MHz | 60 MHz | 60 MHz | 60 MHz |
| Program Flash | 256 KB | 128 KB (-50%) | 512 KB (+100%) | 128 KB (-50%) | 64 KB (-75%) | 128 KB (-50%) |
| Data/Program RAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| Supply Voltage (I/O) | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| CAN Controller | Yes | Yes | Yes | Yes | Yes | Yes |
주요 차별점
- Largest Flash in the 56F835x sub-family at 144-LQFP (vs MC56F8355VFVE)
- Best balance of Flash density and 60 MHz throughput in 144-LQFP (vs MC56F8347VPY60)
- Mature 56F835x peripheral set optimized for motor control (vs MC56F82726VLC)
설계 노트
The MC56F8356VFVE requires a dual-rail supply: 3.3 V for I/O and 2.5 V for the core. Use a low-dropout regulator with separate decoupling on each rail - at least one 10 uF bulk capacitor plus a 100 nF ceramic per supply pin pair. Power-on reset sequencing is critical: bring up the 2.5 V core rail first or simultaneously with the 3.3 V I/O rail to prevent latch-up. Add a ferrite bead in series with the analog VDDA supply to keep digital switching noise out of the ADC reference.
Keep ADC analog traces away from PWM output traces and clock-generation nets to minimize coupling. Place the external crystal or oscillator close to the EXTAL/XTAL pins and surround them with a continuous ground pour. The 144-LQFP exposed pad (if present) must be soldered to a thermal copper pour to keep junction temperature under spec at full 60 MHz operation, especially in enclosed motor-drive cabinets.
Do not exceed the 3.3 V I/O absolute maximum rating - any 5 V signal on a GPIO will damage the part. Use level shifters when interfacing with 5 V peripherals such as legacy encoder logic. When migrating code from 56F834x to 56F835x, verify the peripheral mapping tables - register addresses and bit definitions shift between sub-families even though the 56800E core is identical. Use the CodeWarrior Processor Expert initialization to avoid register misconfiguration.
규정 준수 정보
RoHS and lead-free compliant per NXP product page. Halogen-free status not specified in provided data. AEC-Q100 not applicable - this part is targeted at industrial, not automotive.
