MC68HC711E20CFU4 - 8-Bit 20KB EPROM 64-PQFP MCU
부품 번호: MC68HC711E20CFU4 ⚠ 최종 구매| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $17.11 | $17.11 |
| 10 | $0 | $0.00 |
| 100 | $15.31 | $1,531.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
| 10,000 | $14.41 | $144,100.00 |
MC68HC711E20CFU4 개요
A microcontroller such as the MC68HC711E20CFU4 sits above simple logic ICs in the semiconductor hierarchy: it integrates CPU, program memory, data memory, timers, serial interfaces, and parallel I/O into one device. An 8-bit microcontroller executes instructions over an 8-bit data bus, making it well suited to appliances, industrial controllers, instrumentation, and legacy embedded platforms where cost, deterministic control, and peripheral integration matter more than high computational throughput.
The most useful verified features are the 8-bit HC11 CPU, 20 KB EPROM, 5 V operation, 64-pin PQFP package, and the listed SPI capability. The EPROM provides permanent program storage for firmware, while the large pin count supports multiple peripheral functions and dedicated I/O. The manufacturer-family description confirms that M68HC11E-series devices combine the CPU with high-performance on-chip peripherals, but exact pin functions, interrupt vectors, and peripheral limits must be taken from the complete datasheet.
MC68HC711E20CFU4 belongs to the M68HC11 E-series architecture. Its legacy 8-bit design is appropriate for embedded controllers that were originally developed around the HC11 instruction set. The part is typically programmed and qualified against the original M68HC11E documentation rather than modern high-performance MCU platforms. The verified sources identify both Motorola-era documentation and later Freescale/NXP-related distribution records, reflecting the device's long legacy support history.
Typical uses include industrial equipment, motor and process-control systems, automotive and transportation modules, communications interfaces, and embedded products where an 8-bit HC11 architecture is already established. In these applications, the controller can supervise sensors, operate actuators, manage timers, and communicate through serial peripherals while retaining a straightforward legacy software model.
The most important design consideration is supply continuity: this is a legacy microcontroller and is offered by Rochester Electronics through the verified distributor listing. Engineers should confirm stock, package suffix, memory configuration, temperature grade, and programming requirements before committing a new design. A replacement must match the exact pinout, memory map, peripheral arrangement, clock behavior, and software assumptions rather than merely having a similar instruction set.
This page consolidates the verified distributor pricing snippet, source traceability, legacy-MCU context, package information, and engineering selection cautions. The alternative section intentionally avoids unverified cross-device claims because the supplied cross-reference results did not identify enough exact, pin-compatible drop-in MPNs.
드롭인 대체품: MC68HC711E20CFU4 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MC68HC711E20CFU4 (동일 폼 팩터 및 풋프린트) — 차이점: Maximum Clock Frequency, Package, Program Memory.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MC68HC11E0CFNE3
✅ 드롭인✓ 재고 있음
$9.95 / 개
데이터시트 보기 →MC68HC11E0CFNE4
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MC68HC11E1CFNE2
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MC68HC11E2CFNE2
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MC68HC11E20CFU4
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MC68HC711E20CFU4 최대 정격 & 전기적 특성
| Microcontroller Type | 8-bit microcontroller |
| CPU Core | M68HC11 / HC11 CPU |
| Program Memory | 20 KB EPROM |
| Operating Supply | 5 V |
| 최대 클록 주파수 | 4 MHz |
| Architecture | 8-bit |
| Serial Interface | SPI |
| 패키지 | 64-pin PQFP |
| 실장 유형 | Surface mount |
| Package Dimensions | 14 mm x 14 mm x 2.2 mm |
| RoHS 상태 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
| Lead-Free Status | unknown |
| Pricing Basis | As of 2026-10-20: 1 unit $17.11; 100 units $15.31; 10000 units $14.41 |
MC68HC711E20CFU4 14 mm x 14 mm x 2.2 mm 핀 구성 가이드
MC68HC711E20CFU4(14 mm x 14 mm x 2.2 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MC68HC711E20CFU4.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MC68HC711E20CFU4 적합 용도: 6 애플리케이션s: Legacy Industrial Control, SPI Sensor Acquisition, Motor and Relay Control, Automotive Accessory Electronics, Instrumentation and Data Logging, Communications Interface Controller.
Legacy Industrial Control
MC68HC711E20CFU4 fits legacy industrial-control equipment that already depends on the HC11 CPU and its established memory and peripheral map. The verified part provides 20 KB EPROM for fixed control firmware, operates from 5 V, and is rated at 4 MHz in the supplied cross-reference record. Place it in an existing 64-pin PQFP control board when sensors, relays, motor drives, and interlocks already match its legacy I/O architecture. The main benefit is avoiding a platform migration and retaining known firmware behavior. Before redesign, verify the complete pinout, RAM and EEPROM resources, timer assignments, and operating-temperature limits; those values are not included in the verified excerpts.
추천
SPI Sensor Acquisition
The verified listing identifies SPI capability, making MC68HC711E20CFU4 suitable for legacy SPI sensor acquisition when the board already uses the M68HC11E peripheral arrangement. The 5 V supply and 4 MHz device rating provide the basic operating context for a deterministic embedded controller, while 20 KB EPROM stores acquisition and filtering firmware. Use the MCU to issue sensor commands, read serial data, apply calibration, and control an actuator or status indicator. Confirm SPI clock polarity, transfer rate, chip-select mapping, and exact signal pins from the manufacturer technical data because those details are not present in the supplied snippets.
추천
Motor and Relay Control
MC68HC711E20CFU4 can serve as the supervisory controller in legacy motor, valve, or relay systems because the verified family description identifies an M68HC11 CPU with integrated on-chip peripherals and the target includes 20 KB EPROM. The controller can sequence outputs, monitor interlocks, count events, and provide status feedback without a separate host processor. Its 64-pin PQFP package offers the pin count needed for many such legacy designs, but exact timer outputs, drive-control functions, and I/O levels must be confirmed from the complete datasheet. Use galvanic isolation and appropriate driver circuits where inductive or high-energy loads are involved.
추천
Automotive Accessory Electronics
MC68HC711E20CFU4 is relevant to older automotive accessory and body-electronics modules where the HC11 architecture and 5 V legacy platform are already embedded. The verified records support an 8-bit controller with 20 KB EPROM and 4 MHz operation, which is consistent with non-safety-critical auxiliary functions such as panel control, relay logic, or sensor management. Automotive use requires separate verification of AEC-Q100 status, temperature range, EMC, transient immunity, and availability; none of those claims can be assumed from the package or legacy origin. Prefer the MCU for maintenance and continuation work, not for a new safety-critical design without complete qualification evidence.
추천
Instrumentation and Data Logging
MC68HC711E20CFU4 is suitable for legacy instrumentation systems that need local control, serial communication, and permanent firmware storage in one device. The verified 20 KB EPROM can hold acquisition routines and calibration logic, while the stated SPI capability can connect to sensors or converters that share the legacy platform. In a data logger, the MCU can timestamp samples, manage storage sequencing, and report status through available serial interfaces. Verify RAM, EEPROM, timer resolution, and communication peripheral details before committing to new instrumentation; these specifications remain [DATA_NEEDED] in the supplied evidence.
추천
Communications Interface Controller
MC68HC711E20CFU4 can act as a communications-oriented controller in older embedded systems where SPI is already used for peripheral connectivity. The verified device rating of 4 MHz and 5 V operation provides a defined legacy operating point, while 20 KB EPROM supports protocol and buffering firmware. Depending on the exact HC11 peripheral configuration, it may supervise a serial link, perform framing, or manage an attached transceiver; however, UART, baud-rate, and SPI timing details are not in the verified excerpts. Confirm the pin map and clock configuration in the manufacturer technical data before designing a new interface or claiming interoperability.
추천
추천 제품 요약
엔지니어링 참조 데이터: MC68HC711E20CFU4 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC68HC11E0CFNE3 | MC68HC11E0CFNE4 | MC68HC11E1CFNE2 | MC68HC11E2CFNE2 | MC68HC11E20CFU4 |
|---|---|---|---|---|---|---|
| Brand | Freescale Semiconductor | Freescale Semiconductor | Freescale Semiconductor | Freescale Semiconductor | Freescale Semiconductor | Freescale Semiconductor |
주요 차별점
- Verified legacy HC11 identity (vs MC68HC11E0CFNE3)
- Confirmed 64-pin PQFP package class (vs MC68HC11E0CFNE4)
- Explicit SPI support in the verified listing (vs MC68HC11E1CFNE2)
- Known distributor pricing reference (vs MC68HC11E2CFNE2)
설계 노트
Do not treat a similar HC11-family MPN as a drop-in replacement without comparing the complete package pinout. The verified target is a 64-pin PQFP with 20 KB EPROM, 5 V operation, 4 MHz rating, and SPI capability, but the supplied excerpts do not provide RAM, EEPROM, timer, interrupt, or alternate-function details. Download the full M68HC11E Family Technical Data and compare every power, ground, clock, reset, port, and peripheral signal before substitution.
Design the 5 V rail for the MCU and all attached legacy peripherals, then verify each device's actual input-voltage limits and supply sequencing from the manufacturer technical data. Do not infer a modern low-voltage power architecture from the 5 V target rating. Because the verified excerpts do not state current consumption, decoupling requirements, or voltage thresholds, use [DATA_NEEDED: power consumption and external component requirements] until the full datasheet is available.
Preserve the existing M68HC11E 64-pin PQFP land pattern when maintaining a legacy board, but inspect the package orientation, pin-1 marking, exposed thermal requirements, and solder mask before assembly. Keep clock and reset routing short, provide clean return paths, and follow the manufacturer layout guidance for any required external oscillator or timing components. The verified package dimensions are 14 mm by 14 mm by 2.2 mm, but pin-level routing data remains unavailable.
EPROM programming is a different workflow from modern Flash firmware development. Confirm the programming voltage, algorithm, erase procedure, and whether the intended part is masked-programmed, factory-programmed, or field-programmed. The verified source identifies 20 KB EPROM but does not provide programming timing or endurance; use the official technical data and programming equipment documentation before production programming.
규정 준수 정보
The verified web snippets do not provide RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status. No compliance claim should be inferred from the legacy origin or package.
