MSP430P325IPG - 16-Bit 8MHz Mixed-Signal MCU | TI
부품 번호: MSP430P325IPG ✓ 활성MSP430P325IPG 개요
A mixed-signal microcontroller combines a digital processor with analog and display peripherals on one integrated circuit. In the product hierarchy, the MSP430P325IPG is an MCU, a microcontroller, and a mixed-signal semiconductor. Its 16-bit RISC architecture supports efficient embedded control, while the ADC enables direct acquisition of analog sensor signals without requiring a separate converter. The integrated LCD interface supports segmented display applications.
The device includes 16 KB of one-time-programmable memory and 512 bytes of RAM. Its clock performance is specified at 8 MHz, with a 300 ns instruction-cycle figure also listed for the MSP430 family device. The integrated conversion interface provides a 14-bit ADC, while the display section supports 84 segments. These resources allow firmware, measurement, control, and user-interface functions to share one compact package.
Power efficiency is a central design feature of the MSP430 architecture. The MSP430P325IPG operates from a low supply voltage range identified as 3.3 V or 5 V, with a 5.5 V maximum supply identified for the device family. Five power-saving modes are listed, and standby-mode current can fall to 0.1 mA under the cited conditions. A low-power operating current is also identified at 1 MHz and 3 V.
Typical applications include industrial panel meters, portable measurement instruments, battery-powered data loggers, keypad-and-display controllers, and compact sensor-conditioning systems. The 84-segment LCD capability is particularly useful for numerical or graphical instruments, while the 14-bit ADC supports analog inputs such as temperature, pressure, potentiometer, and resistive-bridge measurements.
PCB design should preserve the package power, ground, analog-input, LCD-segment, clock, and programming connections shown in the manufacturer pin-description table. Place analog and digital return paths carefully, provide the required bypass capacitance at the supply pins, and route the LCD segment outputs away from sensitive analog inputs. The 64-pin PQFP footprint also requires adequate assembly clearances for its leads and underside.
This page consolidates the device identity, electrical parameters, package information, application guidance, sourcing workflow, and engineering design considerations. It is intended to help engineers determine whether the MSP430P325IPG provides the required memory, conversion, display, speed, and low-power characteristics before beginning a board-level design.
드롭인 대체품: MSP430P325IPG — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
MSP430P325EPG
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MSP430P325IPG
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →MSP430P325IPG 최대 정격 & 전기적 특성
| CPU Architecture | 16-bit RISC |
| 최대 클록 주파수 | 8 MHz |
| Program Memory | 16 KB OTP (16K x 8) |
| RAM | 512 bytes |
| ADC Resolution | 14 bits |
| LCD Drive Capability | 84 segments |
| 공급 전압 | 3.3 V or 5 V |
| Maximum Supply Voltage | 5.5 V |
| Standby Current | Down to 0.1 mA |
| Power-Saving Modes | 5 modes |
| Instruction Cycle | 300 ns |
| Package Type | 64-pin PQFP |
| Package Dimensions | 14 mm x 20 mm |
| 실장 유형 | Surface mount |
MSP430P325IPG 14 mm x 20 mm 핀 구성 가이드
MSP430P325IPG(14 mm x 20 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MSP430P325IPG.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MSP430P325IPG 적합 용도: 6 애플리케이션s: Industrial Panel Meter, Portable Data Logger, Battery-Powered Meter, Keypad and Segment Display Controller, Temperature and Pressure Instrument, Embedded Sensor Controller.
Industrial Panel Meter
The MSP430P325IPG fits an industrial panel meter because it combines a 16-bit CPU running at up to 8 MHz with a 14-bit ADC and an 84-segment LCD driver. The converter can acquire conditioned signals from resistive or voltage-based sensors, while the display interface presents measurements and status information without a separate LCD controller. Its 16 KB OTP program memory and 512-byte RAM support compact embedded control and data processing. Use the 3.3 V or 5 V operating range to match the instrument architecture and review the 5.5 V maximum supply during power-supply design.
Portable Data Logger
The MSP430P325IPG is appropriate for a portable data logger that must balance processing capability with low standby consumption. The 16-bit RISC CPU can perform sampling, scaling, and control tasks at up to 8 MHz, while the 14-bit ADC supports analog sensor acquisition. Five power-saving modes and standby current down to 0.1 mA help reduce energy use between measurement events. The 16 KB OTP and 512-byte RAM are best suited to focused logging functions, so applications requiring large onboard data buffers should assess their storage requirements before finalizing the design.
Battery-Powered Meter
A battery-powered meter can use the MSP430P325IPG to consolidate measurement, processing, and user display functions. Its 14-bit ADC supports precision-oriented analog acquisition, while the 84-segment LCD capability suits a compact numerical display. The device’s five power-saving modes and standby operation down to 0.1 mA are important for preserving battery life between measurements. Designers should select the appropriate operating mode, clock configuration, LCD loading, and external load-switch strategy, since actual battery consumption also depends on the sensor, display, and power-management components around the MCU.
Keypad and Segment Display Controller
The MSP430P325IPG is well matched to keypad-and-segment-display products requiring an integrated controller and mixed-signal capability. The 16-bit CPU can scan inputs, debounce controls, update an 84-segment LCD, and manage peripheral functions in one firmware design. Its 512 bytes of RAM supports working variables and stack operations, while 16 KB of OTP provides permanent storage for application code. The design should use the manufacturer pin-description table to assign segment outputs and follow the recommended bypass and grounding layout to prevent display activity from degrading sensitive analog measurements.
Temperature and Pressure Instrument
The MSP430P325IPG suits compact temperature or pressure instruments where analog conditioning, control logic, and a local LCD are needed. A 14-bit ADC can digitize the output of a bridge or ratiometric sensor after appropriate amplification and filtering, while the MCU performs calibration, linearization, and display updates. The 84-segment LCD driver supports readable numeric or segmented indications. Use stable references and careful analog layout for repeatable measurements, and confirm that the sensor bandwidth and required sampling rate remain appropriate for the 8 MHz device.
Embedded Sensor Controller
The MSP430P325IPG can act as the central controller in a compact sensor node that must acquire analog measurements and maintain low standby demand. The integrated 14-bit ADC reduces the need for a separate converter in suitable low-frequency measurement systems, while the 16-bit RISC CPU handles conditioning, thresholds, and control logic. Five low-power modes and standby current down to 0.1 mA support duty-cycled operation. The 512-byte RAM is modest, so streaming protocols or large sample buffers may require external storage or a different MCU architecture.
엔지니어링 참조 데이터: MSP430P325IPG — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
설계 노트
Design the supply path for the MSP430P325IPG’s 3.3 V or 5 V operating range and do not exceed the identified 5.5 V maximum. Place the required bypass capacitors close to the supply and ground pins, and account for startup, noise, and external load transients. For battery-powered products, use the five available power-saving modes deliberately and measure current with the LCD, ADC, oscillator, and unused peripherals in their intended states.
Use the Texas Instruments MSP430P325 datasheet pin-description table when assigning the 64-pin PQFP footprint. Keep analog inputs and their conditioning components away from LCD segment outputs, switching-node connections, and fast digital return paths. Continuous ground-plane distribution and short supply connections help reduce coupling between the 14-bit ADC, the 84-segment display interface, and the digital CPU. Confirm pin orientation against the package drawing before creating the PCB footprint.
Do not treat a MCU with similar ADC or LCD features as a drop-in replacement. The MSP430P325IPG combines a 16 KB OTP program area, 512-byte RAM, 8 MHz CPU operation, a 14-bit ADC, 84-segment LCD drive, and a 64-pin PQFP package. A replacement also needs a compatible pin arrangement, memory map, interrupt behavior, and LCD connection. Make programming and validation fixtures capable of programming the one-time-programmable memory only after the firmware image has been fully reviewed.
규정 준수 정보
Compliance declarations were not identified in the product records and remain unconfirmed.