NXP Semiconductors

MC7457VG1000LC - MPC7457 1.0GHz PowerPC G4 MPU, 483-FCCBGA | NXP

부품 번호: MC7457VG1000LC ✗ 단종
재고 있음 영업일 기준 1~3일 내 발송
1.3 V Vdss 483-FCCBGA (29x29 mm) Package 1.0 GHz Speed
시작가 $220 USD / 개
MOQ: 1 |
가격 업데이트: 2026-10-16
볼륨 가격
수량 단가 합계
1 $296.78 $296.78
10 $285 $2,850.00
100 $268.5 $26,850.00
500 $245 $122,500.00
1,000 $220 $220,000.00
ℹ️ 모든 가격은 USD 기준입니다

MC7457VG1000LC 개요

The NXP MC7457VG1000LC is a PowerPC G4 host microprocessor (MPC74xx family) delivering 1.0 GHz clock speed in a 483-ball Flip-Chip Ceramic BGA (FCCBGA) measuring 29x29 mm, with a 1.3 V core voltage and 105 C maximum operating temperature (APOLLO 7 RV1.2 silicon revision).

A microprocessor (MPU) is the central execution unit of an embedded computing system. The MPC74xx family implements the 32-bit PowerPC RISC architecture, fitting within the broader taxonomy of microprocessors -> RISC processors -> embedded host processors -> integrated circuits (semiconductors). These high-performance host processors are typically deployed in networking, storage, and embedded computing platforms where deterministic throughput and AltiVec SIMD acceleration are valued.

Key features include a 32-bit PowerPC core with full 128-bit AltiVec vector/SIMD execution unit, on-chip L1 cache and dedicated L2 cache, a high-bandwidth processor local bus (MPX/60x bus), and integrated thermal management/die temperature sensing. The 483-FCCBGA flip-chip ceramic package provides the electrical and thermal performance headroom required at gigahertz clock rates and is socket-compatible with prior MPC7457 revisions in the family.

The MPC7457 architecture combines a 7-stage integer pipeline with a dedicated vector issue queue, supporting out-of-order execution of up to 16 in-flight instructions. The integrated L2 cache controller supports backside cache configurations, while the 60x/MPX system bus enables symmetric multiprocessing (SMP) up to two processors for higher-end designs.

Typical applications include high-performance networking line cards, RAID storage controllers, aerospace/defense embedded compute, and legacy industrial computing platforms where the PowerPC/AltiVec ecosystem is preferred over ARM or x86 alternatives. Designers choosing this part typically retain existing PowerPC firmware and toolchains.

When designing with this part, ensure the PCB land pattern matches the 483-ball FCCBGA footprint (29x29 mm) and provide adequate thermal relief via thermal vias under the die. Pair with companion MPC107/MPC1073 northbridge-style bridge devices for full platform designs.

This page synthesizes distributor pricing, drop-in alternatives from the MPC74xx family, and practical design notes for the MC7457VG1000LC that are not consolidated on any single manufacturer page.

드롭인 대체품: MC7457VG1000LC — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: MC7457VG1000LC (동일 폼 팩터 및 풋프린트) — 차이점: Maximum Clock Frequency, Mounting Type, Operating Temperature.

NXP Semiconductors
Maximum Clock Frequency: 1.267 GHz
Mounting Type: Surface Mount (Flip-Chip Ceramic BGA)
Operating Temperature: -40 °C to +105 °C
비교 대상: MC7457VG1000LC →

빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:

MC7457RX1000LC

✅ 드롭인
📦 483-FCCBGA (29x29 mm)
same 1.0 GHz speed, different silicon revision (RX vs VG/APOLLO 7 RV1.2), pin-to-pin compatible 483-FCCBGA

📋 참조 대체품 (카탈로그에 없음)

MC7457VG1267LC

✅ 드롭인
NXP Semiconductors
📦 483-FCCBGA (29x29 mm)
NXP Semiconductors · PowerPC G4 / MPC74xx · PowerPC 32-bit RISC with AltiVec SIMD · APOLLO 7 RV1.2 · 1 · 32-bit (with 128-bit internal) · 1.267 GHz · 1.3 V

✓ 재고 있음

$146.25 / 개

데이터시트 보기 →

MC7457RX1267LC

✅ 드롭인
📦 483-FCCBGA (29x29 mm)
1.267 GHz, RX silicon revision, same 483-FCCBGA footprint as MC7457VG1000LC

📋 참조 대체품 (카탈로그에 없음)

MC7457RX867NC

✅ 드롭인
📦 483-FCCBGA (29x29 mm)
867 MHz vs 1.0 GHz (-13% clock), RX silicon revision, same 483-FCCBGA footprint, lower power

📋 참조 대체품 (카탈로그에 없음)

MC7457VG1000LC 최대 정격 & 전기적 특성

Product Type Microprocessor (MPU)
Family MPC74xx PowerPC G4
Core PowerPC 32-bit RISC with AltiVec
Silicon Revision APOLLO 7 RV1.2
Number of Cores 1
Core Voltage 1.3 V
최대 클록 주파수 1.0 GHz
동작 온도 0 C to 105 C
패키지 483-FCCBGA (29x29 mm)
Package Code BGA, square, flip-chip ceramic
Bus Type 60x / MPX processor local bus
SIMD Unit AltiVec (128-bit vector engine)
실장 유형 Surface Mount (BGA)
Peak Reflow Temperature 260 C

MC7457VG1000LC bga, square, flip-chip ceramic 핀 구성 가이드

MC7457VG1000LC(bga, square, flip-chip ceramic 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

MC7457VG1000LC의 bga, square, flip-chip ceramic 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MC7457VG1000LC.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MC7457VG1000LC 적합 용도: 6 애플리케이션s: High-Performance Networking Line Cards, RAID Storage Controllers, Aerospace and Defense Embedded Compute, Industrial Computing Platforms, Legacy Telecom Infrastructure, Single-Board Computers for Embedded OEMs.

🌐

High-Performance Networking Line Cards

The MC7457VG1000LC's 1.0 GHz PowerPC core with 128-bit AltiVec SIMD makes it well suited for high-performance networking line cards where packet inspection, encryption, and quality-of-service classification run at line rate. The AltiVec unit accelerates bulk-pattern matching and cryptographic hash operations that are common in deep-packet-inspection pipelines. Compared with software-only forwarding, the AltiVec engine can deliver 2-4x throughput on vector-friendly workloads. The 483-FCCBGA package supports the thermal dissipation required at sustained gigahertz operation, while the 60x/MPX system bus enables integration with companion northbridge/bridge ASICs in chassis-level designs.

🖥️

RAID Storage Controllers

In RAID storage controllers the MC7457VG1000LC handles XOR parity calculation, Reed-Solomon error correction, and stripe rebuild operations that benefit from the AltiVec SIMD engine. The 1.0 GHz clock sustains multi-gigabyte-per-second aggregate throughput across SATA/SAS-attached disk arrays. Compared with ARM-class RAID controllers, the PowerPC G4's larger caches and AltiVec acceleration reduce CPU load by 30-50% on parity-heavy workloads. The 483-FCCBGA footprint and 105 C operating range allow placement in densely packed storage enclosures with shared cooling.

✈️

Aerospace and Defense Embedded Compute

Aerospace and defense embedded compute platforms leverage the MC7457VG1000LC for radar signal processing, flight control, and mission computing where the PowerPC architecture has long flight heritage. The 105 C maximum operating temperature and ruggedized 483-FCCBGA ceramic package suit avionics-grade thermal envelopes and vibration-prone environments. Compared with newer ARM Cortex processors, the PowerPC G4 retains decades of validated software, reducing re-certification cost. The AltiVec unit accelerates FFT and DSP-style kernels used in synthetic aperture radar and electronic warfare applications.

🏭

Industrial Computing Platforms

Legacy industrial computing platforms - including machine controllers, SCADA nodes, and factory automation mainboards - use the MC7457VG1000LC where long-running software stacks have been validated on the PowerPC ecosystem. The 1.0 GHz performance with AltiVec acceleration supports real-time control loops and HMI rendering. Compared with newer ARM Cortex-A platforms, the PowerPC G4 provides deterministic interrupt latency and a mature VxWorks/LynxOS-PPC software ecosystem for safety-critical industrial applications. The FCCBGA package and 105 C rating support industrial temperature range deployments.

🌐

Legacy Telecom Infrastructure

Telecom infrastructure equipment - including media gateways, SS7 signaling processors, and base station controllers - depends on the MC7457VG1000LC for protocol termination and voice/fax processing. The PowerPC G4 with AltiVec excels at voice codecs, echo cancellation, and DSP kernels required in legacy PSTN-to-IP gateways. The 60x/MPX system bus integrates with telecom ASICs and TDM fabrics that have been designed around the MPC74xx ecosystem. Compared with migration to NXP QorIQ, retaining the MC7457VG1000LC preserves validated telecom software stacks and regulatory certifications.

🧩

Single-Board Computers for Embedded OEMs

OEMs building long-lifecycle single-board computers (SBCs) for medical imaging, test equipment, and specialty printers continue to design around the MC7457VG1000LC. The PowerPC G4 with AltiVec provides headroom for image processing pipelines in medical and test applications. Compared with newer ARM SBCs, the MC7457VG1000LC's larger caches and FPU benefit legacy codebases and maintain predictable long-term availability through aftermarket channels. The 483-FCCBGA package supports robust board assembly at OEM production scale.

추천 제품 요약

MPC107 Companion northbridge/bridge chip 사용처: High-Performance Networking Line Cards, RAID Storage Controllers, Aerospace and Defense Embedded Compute, Industrial Computing Platforms, Legacy Telecom Infrastructure, Single-Board Computers for Embedded OEMs MC7457VG1267LC NXP Semiconductors 사용처: High-Performance Networking Line Cards, Aerospace and Defense Embedded Compute, Legacy Telecom Infrastructure MC7457RX1000LC Drop-in alternate with same 1.0 GHz speed 사용처: RAID Storage Controllers, Single-Board Computers for Embedded OEMs MC7457RX867NC Lower-power bin for thermal-constrained designs 사용처: Industrial Computing Platforms
What is the MC7457VG1000LC?
The MC7457VG1000LC is a 1.0 GHz PowerPC G4 host microprocessor in NXP's MPC74xx family, packaged in a 483-ball FCCBGA (29x29 mm). According to the NXP datasheet, it integrates a 32-bit PowerPC core with a 128-bit AltiVec SIMD engine and runs at 1.3 V core supply, targeting networking, storage, and embedded compute platforms.
What is the difference between MC7457VG1000LC and MC7457RX1000LC?
Both run at 1.0 GHz and share the same 483-FCCBGA package, but they differ in silicon revision and likely in stepping/microcode. According to NXP family documentation, MC7457VG uses APOLLO 7 RV1.2 revision while MC7457RX uses a different revision; the 'G' suffix denotes a specific speed/temperature grade, and the 'R' variant has slightly different process and errata history. Both are drop-in compatible at the package level.
What is the difference between MC7457VG1000LC and MC7457VG1267LC?
The two parts are pin-compatible on the 483-FCCBGA package and share the APOLLO 7 RV1.2 silicon. The MC7457VG1000LC runs at 1.0 GHz while the MC7457VG1267LC runs at 1.267 GHz. Choosing the 1267LC increases throughput by approximately 27% but also raises power consumption; the 1000LC is the lower-power, more conservative bin.
What is the operating voltage of MC7457VG1000LC?
The MC7457VG1000LC operates at a 1.3 V core supply per the NXP MPC7457 datasheet. The processor integrates internal PLL clock generation from an external system bus reference, but the core VDD must be tightly regulated at 1.3 V with high-current decoupling to avoid logic errors at gigahertz switching rates.
Where to buy MC7457VG1000LC?
The MC7457VG1000LC can be purchased from authorized distributors listed on Octopart and DigiKey, with approximately 2,800 units in stock per Heisener listings as of 2026-10-17. Because the part is obsolete, lead times vary; Heisener quotes delivery in the Oct 18 - Oct 23 window, but volume orders should be confirmed with multiple sources due to limited remaining inventory.
What is the price of MC7457VG1000LC?
The MC7457VG1000LC unit price is approximately $296.78 at qty 1 per Heisener as of 2026-10-17. Pricing varies by distributor and quantity breaks, with volume discounts at 100, 500, and 1000 units. Due to obsolete lifecycle status, prices may fluctuate significantly with available stock and authorized-channel availability.
What is the lead time for MC7457VG1000LC?
Lead time for the MC7457VG1000LC is approximately 1-2 weeks per Heisener listing as of 2026-10-17 (estimated delivery Oct 18 - Oct 23). Because the part is marked obsolete, lead times can change rapidly as remaining channel inventory depletes; for production volumes, consider qualified independent distributors or franchise sources.
Is MC7457VG1000LC in stock?
Yes, the MC7457VG1000LC has approximately 2,800 units in stock at Heisener as of 2026-10-17, but the part is listed as obsolete. Distributor stock is finite and expected to deplete over time. Engineers designing new platforms should evaluate active MPC74xx family variants or migrate to supported NXP QorIQ Layerscape parts.
What is the best drop-in replacement for MC7457VG1000LC?
The best drop-in replacements for the MC7457VG1000LC are other 483-FCCBGA MPC7457 family members at the same or different speed grades: MC7457RX1000LC (same 1.0 GHz, different silicon revision), MC7457VG1267LC (1.267 GHz, same APOLLO 7 RV1.2 silicon, and pin-compatible), and MC7457RX1267LC (1.267 GHz, alternative revision). All share the 483-ball FCCBGA footprint for true drop-in compatibility.
What can replace MC7457VG1000LC?
Within the same NXP MPC7457 family, drop-in replacements include MC7457RX1000LC, MC7457VG1267LC, and MC7457RX1267LC - all sharing the 483-FCCBGA package. For new designs, consider migrating to NXP QorIQ P-series processors, though this requires PCB redesign and firmware rework. Each replacement maintains the PowerPC architecture and AltiVec SIMD unit for software compatibility.
MC7457VG1000LC vs MC7457RX867NC - which is better?
The MC7457VG1000LC and MC7457RX867NC are both MPC7457 family members in 483-FCCBGA packages, but differ in clock speed (1.0 GHz vs 867 MHz) and silicon revision (APOLLO 7 RV1.2 vs RX revision). Choose VG1000LC when higher throughput is required; choose RX867NC for lower power consumption and lower cost. Both are drop-in compatible at the package level.
Is MC7457VG1000LC the same as MC7447AHX1000NB?
No, the MC7457VG1000LC and MC7447AHX1000NB are different NXP PowerPC parts. The MC7457 is a higher-performance MPC74xx variant with AltiVec SIMD; the MC7447 (MPC7447) is a lower-power variant also in the G4 family but with different microarchitecture details and package. They are NOT pin-compatible drop-in replacements despite sharing the PowerPC heritage.
Where to download MC7457VG1000LC datasheet PDF?
The official NXP MC7457VG1000LC datasheet (covering the MPC7457 family) can be downloaded from https://www.nxp.com/docs/en/data-sheet/MPC7457EC.pdf. The datasheet documents the PowerPC G4 core, AltiVec unit, bus interface, electrical characteristics, thermal specifications, and the 483-FCCBGA package outline for design and layout reference.
Where to find MC7457VG1000LC pinout?
The 483-ball FCCBGA pinout for the MC7457VG1000LC is documented in the NXP MPC7457 hardware specifications manual (separate from the datasheet). Ball map coordinates, power/ground ball assignments, and signal grouping are in the hardware specs document; consult the NXP product page or contact NXP technical support for the latest pinout document revision.
What are the key specifications of MC7457VG1000LC that engineers should know?
The MC7457VG1000LC is a 1.0 GHz single-core 32-bit PowerPC G4 microprocessor with AltiVec SIMD in a 483-FCCBGA 29x29 mm package. Per NXP datasheet, it runs at 1.3 V core supply, supports 0-105 C operation, integrates L1/L2 cache controllers, and uses a 60x/MPX processor local bus. Designers should plan for thermal management via thermal vias and follow FCCBGA PCB layout guidelines.

엔지니어링 참조 데이터: MC7457VG1000LC — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the MC7457VG1000LC when you need a mature, widely-documented 1.0 GHz PowerPC G4 host processor in a 483-FCCBGA package for networking, storage, or aerospace/defense embedded platforms where validated software stacks and AltiVec SIMD acceleration are required. For new designs with tighter cost targets, evaluate the MC7457RX867NC (lower cost, slightly lower throughput). For new designs that can use higher clock speed without thermal redesign, the MC7457VG1267LC is a drop-in upgrade. For long-term new platforms, consider migrating to active NXP QorIQ Layerscape parts, but budget for PCB redesign and firmware porting effort.

대체품과의 비교

파라미터 이 제품 MC7457RX1000LC MC7457VG1267LC MC7457RX1267LC MC7457RX867NC
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 483-FCCBGA (29x29 mm) 483-FCCBGA (29x29 mm) - same 483-FCCBGA (29x29 mm) - same 483-FCCBGA (29x29 mm) - same 483-FCCBGA (29x29 mm) - same
Clock Speed 1.0 GHz 1.0 GHz 1.267 GHz 1.267 GHz 867 MHz
Silicon Revision APOLLO 7 RV1.2 (VG) RX APOLLO 7 RV1.2 (VG) RX RX
Core Voltage 1.3 V 1.3 V 1.3 V 1.3 V 1.3 V
Architecture PowerPC G4 32-bit + AltiVec PowerPC G4 32-bit + AltiVec PowerPC G4 32-bit + AltiVec PowerPC G4 32-bit + AltiVec PowerPC G4 32-bit + AltiVec

주요 차별점

  • APOLLO 7 RV1.2 silicon revision with mature errata history (vs MC7457RX1000LC)
  • 1.0 GHz clock speed at 1.3 V core supply (vs MC7457RX867NC)
  • Drop-in compatibility with higher-speed MC7457VG1267LC (vs MC7457VG1267LC)

설계 노트

The 483-FCCBGA flip-chip ceramic package dissipates significant heat at 1.0 GHz sustained operation; design the PCB with a thermal via array directly under the package die shadow to transfer heat to internal copper planes or an external heatsink. At full 1.0 GHz clock with all execution units active, junction temperature can approach the 105 C limit in still air - active cooling (forced airflow) is strongly recommended in enclosed chassis.

The 483-ball FCCBGA requires precise land pattern geometry and reflow profile control. Use NSMD (non-solder mask defined) pads with microvia-in-pad or via-on-pad construction for reliable joint formation. Match the 29x29 mm package footprint exactly per NXP hardware specifications; misalignment by even 0.1 mm can cause shorts between adjacent balls. Apply 260 C peak reflow per the package rating.

The 1.3 V core supply must be sourced from a high-current, low-noise LDO or DC-DC regulator placed within 25 mm of the package with bulk ceramic decoupling. Place a 100 uF polymer tantalum plus 1 uF / 0.1 uF ceramic decoupling network as close as possible to each VDD ball group; the high transient current demands at gigahertz switching exceed what simple LDOs can supply without droop.

Do not confuse the MC7457VG1000LC with the MC7447 (MPC7447) family - they share the PowerPC G4 heritage but are NOT pin-compatible drop-in replacements. The 7457 includes the AltiVec SIMD engine and the full MPX bus; the 7447 is a lower-power variant with different microarchitecture. Verify the part number suffix carefully when sourcing or substituting.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

RoHS, REACH, and lead-free status were not stated in the verified web data for this obsolete part; marked as unknown. AEC-Q100 not applicable (industrial/aerospace/embedded computing, not automotive).

데이터 검증일: 2026-10-17 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

MC7457VG1000LC MC7457VG1000LC datasheet NXP MC7457VG1000LC PowerPC G4 MPC7457 1GHz 483-FCCBGA microprocessor 483-FCCBGA PowerPC BGA processor MC7457VG1000LC networking line card MC7457VG1000LC vs MC7457RX1000LC MC7457VG1000LC drop-in replacement MC7457VG1000LC buy price stock MPC7457 AltiVec APOLLO 7 RV1.2 MPC7457 obsolete replacement NXP PowerPC G4 1.3V 105C embedded host processor

관련 부품 & 용어

NXP Semiconductors MC7457VG1000LC MC7457RX1000LC MC7457VG1267LC MC7457RX1267LC MC7457RX867NC MPC7457 MPC74xx PowerPC G4 AltiVec SIMD APOLLO 7 RV1.2 FCCBGA BGA microprocessor RISC architecture embedded host processor 60x/MPX bus 1.3 V core supply RoHS AEC-Q100
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
합계: $0.00 USD
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기